Ace Nashville luthier Joe Glaser and his crew reveal their recipes for maximum chime and jangle.
A handful of musicians have built their careers around the 12-string guitar—Lead Belly, Leo Kottke, and Roger McGuinn come to mind—but for most guitarists, an electric or acoustic 12-string is a specialty instrument to be hauled out when a song needs a little extra jangle. As such, 12-string guitars get a smaller part of a player’s setup budget and are rarely checked, despite the fact that they may suffer more from string tension issues than their 6-string siblings. That’s too bad, because when a 12-string’s action is too high or it’s not set up correctly, it feels twice as hard to play.
With a good setup, a 12-string can sound magical. If you have one, or are considering acquiring one, you’ll benefit from understanding some of the factors that contribute to this instrument’s sonic mojo. If you’re not accomplished at setting up a guitar—or game to learn how—we suggest you seek the services of a professional to work on your instrument. However, armed with a little knowledge, the proper tools, and a bit of patience, you can achieve excellent results doing your own basic setup and maintenance. At the very least, understanding the setup process will help you identify a good tech.
Also—and this is important—if you’re shopping for a used 12-string, knowing how to recognize and identify potential setup issues will help you make an informed buying decision, and potentially save you a lot of money.
When it comes to deciding on how to space the strings at the nut, 12-string guitars require extra thought: You have to deal with the space between the two strings within each pair, and, of course, the spacing of the pairs themselves across the fretboard.
Just as with a 6-string guitar, bass, banjo, or mandolin, 12-string setup can be divided into playability and intonation. On the playability side, there is no one-size-fits-all approach, and through experience, guitarists need to discover their personal comfort zones. At Glaser Instruments we typically tell people that for good tone and a wide dynamic range, your setup should be as high as you can manage to play comfortably, yet as low as necessary to keep you wanting to play that instrument. The playability part of setup is personal, but, for the most part, tuning is more absolute. (Some session players have their own intonation formulas, but that’s a subject for another day.)
Because there’s no one “correct” way to set up a guitar, we’re simply going to share a few things we’ve learned in the last 35 years—proven techniques that work for us and our clients. To illustrate these concepts, we’ve chosen two guitars: a 1965 Rickenbacker 360/12 and a ’65 Guild F-212. The latter belongs to producer Bob Ezrin, whose credits include Peter Gabriel, Alice Cooper, Pink Floyd, Kiss, Lou Reed, and Phish. This Guild has added jangle to countless tracks, so chances are you’ve actually heard it.
Each guitar needed some work to play and sound its best, so we’ll take you through what we did and describe how we approached those procedures and why. Some setup issues are common to both 6- and 12-string instruments and have been already covered in Premier Guitar, so instead of rehashing them here, we’ll link you to them. In this article, we’ll focus on considerations that are unique to 12-string setup.
Wrangling the Ric
Photo 1— On this Ric’s original nut, string spacing between the pairs is inconsistent. Also, notice how the two strings in the 1st unison pair are closer together than in the 2nd unison. This nut will be replaced to improve playability.
Photo by Andy Ellis
If you’ve played a 12-string, you know that typically the top two pairs are tuned in unison, while the lowest four pairs are tuned in octaves. On most 12-string guitars, the octave pairs are configured so each high octave string precedes its low octave mate when you strum down across the strings toward the floor.
But on a Rickenbacker 12, this convention is reversed. On string pairs 6-4, the low octave comes first, followed by the high octave, and this idiosyncratic stringing has a subtle sonic effect on chords and riffs. Rest assured the setup principles we’ll discuss here apply to any electric 12, regardless of which way the octave pairs are arranged. We mention the Ric stringing in case you haven’t yet had the pleasure of playing one—don’t freak out when you see it!
Typically the gauges for a light electric 12-string set are .046w/.026w, .036w/.018, .026w/.012, .017/.008, .013./013, and .010/.010, moving from the 6th to the 1st pairs. The “w” indicates a wound string, so as you can see, this means two of the octave pairs—the 5th and 4th—have a mix of wound and plain wire. As we’ll see in a moment, combining radically different string construction and thickness creates unique intonation challenges, and this applies to both electric and acoustic 12s.
Truss rod adjustment. Setups always start with a quick overview and then a truss rod adjustment, if needed. We want a little relief or “bow”—about a business card’s thickness—located around the 6th or 7th fret. As with all things guitar, there is no right or wrong, and while the laws of physics pertain to string rattle and intonation, personal preference ultimately rules. In general, the lighter your attack, the straighter the neck and the lower the action can be.
The Ric’s owner uses a regular light gauge set and plays with a light touch, so we checked the relief and tightened the dual truss rods slightly, reducing the amount of bow by a small amount. [For details on how to adjust a truss rod, read “Time for a Neck Adjustment?” and “Demystifying Truss Rod Tools.”]
String spacing at the nut. While initially inspecting our project Ric, we noticed that the strings weren’t correctly spaced at the nut (Photo 1), so we decided to cut a new one. To preserve the original look, we opted for black synthetic nut material.
Tip: It’s not uncommon to encounter oddball string spacing on an older 12-string, so be sure to check this when buying a used model.
When it comes to deciding on how to space the strings at the nut, 12-string guitars require extra thought: You have to deal with the space between the two strings within each pair, and, of course, the spacing of the pairs themselves across the fretboard. Remember, except for the two unisons, the strings are gauged very differently within each pair, and getting them to look good and feel right is more than twice as complicated as cutting a standard 6-string nut.
If you’re shopping for a used 12-string, knowing how to recognize and identify potential setup issues will help you make an informed buying decision, and potentially save you a lot of money.
There are several different versions of “correct” nut spacing and, as with all things, it boils down to a personal choice based on feel. At our shop we use a computer-controlled Plek machine to cut nut slots because of its speed and accuracy. But machines have to be programmed by humans, so let’s look at the decisions we make when programming our Plek. By the way, these are the same decisions we’d make if we were doing this work by hand—the way we did for years before acquiring the Plek.
As with cutting a 6-string nut, our first step for this Ric was to place the outside strings—a .010 and the .046—where they feel best along the neck edges. The goal is to have these outer strings spaced as widely apart as possible for easy chording, but not so far out that they fall off the neck while playing. Where you place the outside strings depends on how the neck is shaped and how the fret ends are cut and beveled.
Next, we placed the inside unison 1st string where it feels good to fret, which is essentially as close to its mate as possible without causing the two to crash together when they’re plucked with a medium-hard attack. Many 12-string players will tell you that a certain amount of string-against-string “chatter” is actually part of what gives the 12-string guitar its unique chime, so you don’t have to completely eliminate this. A space between the unisons of about .070" is typical. That’s approximately the thickness of a quarter, which makes a great low-tech calibrator.
Now, using the Ric’s outside bass string (.046) and the inside treble (.010) as guides, we located the remaining “main” strings, in this case, the .013, .017, .026w, and .036w (the 2nd, 3rd, 4th, and 5th strings, respectively).
There are different formulas for spacing these main strings: equal center-to-center, equal space between strings, or a hybrid of these two approaches. Essentially, hybrid spacing uses equal distances from the closest edge of the smaller string to the center of the adjacent larger one, moving from the treble side toward the bass.
Before we had a Plek machine at our shop, we used a special formula to calculate our hybrid spacing. But now, there’s an easier way: You can use an inexpensive String Spacing Rule from Stewart-MacDonald to quickly do the job—no math required. [You can watch a video on how to use this tool at stewmac.com.]
Once you’ve located and marked the four main strings on the nut, it’s time to place each string’s pitch mate. Again, the first consideration is feel, although .070" is a good starting point for the space between each pair.
Photo 2 — The string spacing is noticeably off at the bridge, not only within the pairs themselves, but also between them. Compare the 4th, 3rd, and 2nd courses, for example.
Photo by Andy Ellis.
Cutting nut slots. The string slot depth adjustment is done with nut files that correspond to string gauge. String slotting in the nut is very important for comfort, sound, and tuning. Slots left too high will impede playability and make the first position notes sound sharp when they’re fretted. But if you cut the slots too low, the strings will rattle when played open. [For an in-depth explanation of how to remove an old nut and carve a new one, read “How to Convert a Flattop to Nashville Tuning.”]
When filing the proper depth of the string slots on a 12-string nut, keep in mind that the bottoms of the slots should be cut so each string clears the 1st fret by the same amount. Again, we’re dealing with very different gauges in each octave pair. On a 12-string guitar, you might assume that keeping the tops of the strings level in each pair would make it more comfortable to play—and this is true. But by doing so, the lighter-gauge string would have more distance to travel to contact the top of the fret, and this can pull them noticeably out of tune.
At our shop we cut slots so a string clears the 1st fret by a few thousandths of an inch more than it would clear the 2nd fret if held down at the 1st fret. As you might imagine, this is a subject that generates lots of debate, and you can find online tutorials supporting a variety of theories—some good, some baloney.
Dealing with the saddles. The next thing we look at is the bridge. We saw that on this Ric, the string spacing was uneven by any standard (Photo 2). This is one of the most important aspects of playability. If the strings aren’t evenly laid out, it gets hard to differentiate between the pairs, which can cause confusion when you’re playing.
Also, the string radius across the bridge was uneven and didn’t match the fretboard radius. For optimal playability, you want the string saddles to follow the curve of the frets.
And that’s not all: Unlike some electric 12-string guitars, this Ric doesn’t have individual saddles for each string, but instead uses a single aluminum saddle for each pair. This can make it impossible to correctly intonate strings with very different gauges, such as within the 6th course with its .046 low E and .026 high octave.
Photo 3 — Cut from an aluminum bar, this custom saddle has been drilled and tapped for its intonation screw and is now ready to be shaped with a file.
Photo by Andy Ellis
To fix these problems, we decided to replace several saddles with new ones we’d fabricate from aluminum bars (Photo 3).
Finding the intonation points. After cutting the saddle blanks, and drilling and tapping the holes for each saddle’s intonation screw, we installed the new saddles on the bridge and strung everything up to pitch. Because of their disparate gauges, some string pairs need different points of contact on their shared saddle, so our next step was to manually file these in. But how do you find each string’s unique intonation point?
Photo 4 — Using pieces of a thick plain string to determine unique intonation points on the saddle shared by the
6th-course octave pairs.
Photo by Andy Ellis
Here’s our simple trick: First we cut two short lengths from a thick plain string, and then placed one of these lengths between each string and the saddle (Photo 4). After tuning to pitch, we checked the intonation with a precision electronic tuner, moving the string pieces forward or backward—like you would with individually adjustable saddles. Once we were satisfied with the intonation, we marked the spots on the saddle to give us an idea of how to shape the top with a file.
Photo 5 — Individual intonation points have now been filed into this 6th-course saddle.
Photo by Andy Ellis
Next we removed the new saddle, put it in a small vise, and filed away each side so the point of string contact matched the marks we’d made previously (Photo 5). Any minor intonation adjustments can be made after the saddle is on the guitar and we’re doing the final setup.
Photo 6 — Now installed in the bridge, the new 6th-course saddle is ready for final slotting and shaping.
Photo by Andy Ellis
Photo 6 shows the new 6th-string saddle installed on the bridge.
Photo 7 — Using a digital caliper to measure the gap between strings in each pair.
Photo by Andy Ellis
String spacing at the bridge. With the replacement saddles installed, we could now correct the string spacing at this end of the guitar. After positioning the two outside strings to leave sufficient playing clearance along the edge of the fretboard, we set the inside unison 1st string, and then placed the other four main strings using the hybrid formula described earlier. Once the main strings were in place, we positioned the paired strings. This process is similar to spacing the strings at the nut, except at the bridge, the separation within each pair is slightly wider—typically about .080" (Photo 7).
On this Ric, some strings were not spaced correctly from the start, so we had to “migrate” a few slots on the old saddles that we kept. You do this by first filing slightly deeper slots in the correct position and then removing material from the top of the affected saddles to eliminate the old marks. This requires patience and a steady hand. Remember, you can raise the bridge slightly to compensate for filing off a small amount of the saddle.
As you position the string pairs on the saddles, take time to visually confirm that they stay perpendicular to the frets as they travel along the neck to their nut slots.
Photo 8 — With a radius gauge, you can check if the saddles match the curve of the fretboard and determine how deep to file each saddle slot.
Photo by Andy Ellis
To determine the depth of the final saddle slots, we first measured the fretboard with a radius gauge at the 1st, 12th, and 19th frets. This Ric had a 10" radius at all three locations, so we put a 10" radius in the bridge saddles too. Many of the strings were not in this curve (Photo 8), so using the same files as on the nut, we deepened slots where needed and achieved our target radius, using the radius gauge to check our work.
Final adjustments. Every guitar is different in terms of setup. Depending on the fret plane and neck stiffness, some guitars will allow you to set the action very low. Most players prefer to have 12-string action set a little lower than on a 6-string, so it’s not a struggle to fret the guitar, given all the additional string tension. Fortunately, this Ric allowed us to go quite low because the neck was stiff and quite consistent without any major dips or humps.
This Ric’s bridge operates much like a Tune-o-matic, so we set the action at the 12th fret by raising or lowering each side of the bridge, the way you would on a Les Paul. After that, we readjusted the intonation by moving each of the six shared saddles back and forth, again as you would on a Tune-o-matic. [To understand the principles behind intonating an electric guitar, read “How to Set Up a Fender Stratocaster” and “How to Install a New Tune-o-matic Bridge.”]
As a final step, we checked the tuning at the nut. First, we carefully tuned the “beats” out of each open pair, and then checked each string at frets 1 and 2. These fretted notes should look good on a tuner—maybe a tad sharp under finger tension—but still produce beatless unisons and octaves. This can take some work, including some very gentle final filing of the nut slots to make sure the strings all leave from the very front edge of the nut.
Next, we checked intonation again at the 12th fret, this time comparing the open strings to the fretted notes, looking for any beating in the fretted pairs. As expected, we needed to make small adjustments with the file to position a few strings to the front or back of the shared saddle until all of them were perfectly in tune.
Photo 9 — Ah! Now the strings are spaced evenly at the bridge, the saddles are radiused and intonated, and all sharp edges have been filed smooth and polished. This Ric is ready to rock.
Photo by Andy Ellis
With the radius, action, and intonation squared away, we had one last task: Round and polish the saddles to remove any sharp edges (Photo 9).
Test drive. It’s worth mentioning that an instrument might be nicely intonated in the clinical context of a shop bench, but not be so sweet in the reality of a gig or session. Guitarists may have different opinions about intonation—in fact, some studio players prefer to tune the pairs slightly off to produce a cool chorusing effect. For that reason, the last phase of a good setup requires spending time with the instrument’s owner, patiently putting the guitar through its paces and tweaking to suit. If you’re doing your own setup on an electric 12, allow yourself time to dial everything in before you pronounce the guitar ready for prime time.
Finessing the F-212
Photo 10 — After having its neck reset, our project Guild F-212 is secured with clamps while the glue dries.
Photo by Andy Ellis
The first step in setting up an acoustic 12-string is to determine whether or not it can be set up at all. The increased string tension applied by the extra strings takes a toll on an acoustic, literally reshaping the instrument over time. Often the neck pulls forward and the soundboard bellies up, and as a result, the action becomes unplayable. Lowering the saddle may solve the problem in the short term, but if this incremental collapsing continues, ultimately the neck will need to be removed and reinserted into the body at a new angle. Called a neck reset, this is a job for an experienced professional.
Tip: When buying a used acoustic, you need to determine if a neck reset is required. Because it costs hundreds of dollars, a neck reset is a key factor in negotiating the selling price.
Assessing an acoustic 12. Here’s how you can evaluate the instrument’s condition. First, the neck should have a small amount of relief between the nut and body joint. Put a 12-string capo at the 1st fret, then press and hold the 6th-string pair at the fret where the neck joins the body. At around the 7th fret, peer between the bottom of the 6th-string pair and the top of the frets. Ideally, you want to see a small gap. Using your free hand (remember to keep pressing the strings against the frets where the neck joins the body), tap the paired strings against the frets to help you gauge the size of the gap. Repeat this on the 1st pair to estimate relief on the treble side of the fretboard.
For the electric Ric, we were looking for a gap approximately the thickness of a business card. On an acoustic with thicker strings, you might want a slightly larger gap, but the business card is a good starting point. If there’s too much relief—the gap is too large—the truss rod needs to be tightened.
Tip: Many 12-string guitarists tune down a half-step or even a whole-step below standard. Dropped tuning makes the strings easier to fret, reduces strain on the neck and body, and makes a 12-string sound huge.
If this doesn’t straighten the neck enough, you’ll need to check the neck angle or forward pitch in relation to the body. For guitars with bolt-on necks, this angle can be adjusted quite easily, usually with a shim. But on guitars with glued-in or “set” necks—this applies to most acoustic guitars—changing the neck angle is an involved procedure best left to a qualified repair person.
To evaluate the neck angle, first test out the action by playing up and down the fretboard. If the instrument feels reasonably playable and the neck is fairly straight, then check how much of the saddle is exposed at the bridge. A visible 1/8" (.125) of saddle is ideal. A bit more is okay, but 1/16" or less can create trouble. It’s probably a sign that the saddle has already been lowered, and it doesn’t leave you any more leeway to reduce the action. A shallow saddle profile typically indicates a neck reset is required, and that was the case with our project F-212. Photo 10 gives you an idea of what this entails.
But let’s assume you can control the relief with the truss rod and you have enough available saddle height to adjust the action. The next order of business is to confirm the nut is in good shape. As we saw with the Ric, string spacing on a 12-string is particularly tricky because you’re dealing with distances within the string pairs and also between them. And remember, to avoid intonation problems, the bottoms of all the strings need to be a uniform height from the 1st fret.
Photo 11 — This nut looks good. As on an electric 12, the bottoms of all the open strings should sit at a
consistent height above the 1st fret.
Photo by Andy Ellis
On our Guild F-212, the nut looked fine (Photo 11), so we didn’t have to replace or modify it. But if the string spacing or slot depth is off on your acoustic 12’s nut, review the concepts and procedures we just covered for the Ric, and apply them to your flattop.
Intonating the saddle. As with any acoustic guitar, the placement of the saddle in the bridge is critical for good intonation as you play higher up the neck. Theoretically, saddle placement is twice the distance from the nut to the 12th fret, but a guitar with its saddle placed there will play increasingly sharp as you fret in higher positions, so saddle “compensation” is necessary. This means moving the point where the string sits on the saddle back away from the neck by a small amount.This amount can vary according to string gauge and action, but a good average is 4/32" (0.125) at the 1st string and 7/32" (0.219) at the 6th, measured from the middle of the saddle slot.
There are two common saddle widths for most steel-string acoustics, whether 6- or 12-string. The narrower one is approximately 3/32" (0.093), and this allows scant room for adjusting the contact point of each string. The other common width is 1/8" (0.125), and this allows slightly more room to adjust each string’s vibrating length.
Many 12-string guitarists tune down a half-step or even a whole-step below standard. Dropped tuning makes the strings easier to fret, reduces strain on the neck and body, and makes a 12-string sound huge.
One intonation option is to widen the saddle slot and install a saddle with a width of 1/4" or more, which would give considerably more room to adjust the contact point for each string. This was not uncommon in the ’70s, but today most players consider it overkill because of the cost, small gain in tuning accuracy, and negative impact on an instrument’s value.
On many guitars, the contact point for the string as it comes up from its bridge pin toward the soundhole is the center of the saddle or slightly forward from the center. However, with a small file and a bit of patience, you can achieve more accurate intonation by shifting this contact point. And that’s what we decided to do for this F-212—create a new bone saddle and adjust the contact points to improve the tuning within the constraints of the 1/8" saddle width. This is a reversible mod, and that’s an important consideration for a vintage guitar—especially one with such a rich recorded legacy as this Guild.
Tip: For years, memorable music has been made on non-intonated acoustic 12s. So unless the intonation is really bothering you, consider keeping a non-intonated saddle on your guitar.
Knowing where to place the contact points on a 12-string saddle comes from years of experience—it’s not something that’s easily described in an article because so much depends on the guitar, the strings, and the player.
Photo 12 — This new bone saddle blank has been shaped, fitted, and radiused, and is now ready to be intonated.
Photo by Andy Ellis
That said, the basic steps go like this: First you fit and radius a new bone blank (Photo 12). While it’s still seated in the saddle slot, pencil perpendicular lines across the saddle to mark where each string emerges through the bridge pin holes to contact the saddle.
Next, along the top of the saddle and parallel to it, pencil in the contact points where the different strings will rest. The 1st and 2nd unison pairs will sit much like the single 1st and 2nd strings do on a 6-string—the 1st pair will be forward, the 2nd pair as far back as possible, essentially resting on the rear edge of the saddle.
Then pencil in the contact points for the four lower strings of each octave pair. Again, these points will resemble the pattern of a 6-string guitar, which has its 3rd string sitting forward on the front (soundhole) edge, and strings 4, 5, and 6 respectively shifting slightly back away from the neck toward the bridge pins.
The high strings in each octave pair typically sit further back on the saddle than their lower mates. The octave 3rd string (high G, in standard tuning), sits at the rear edge, and the 4th, 5th, and 6th octaves gradually shift forward, with the octave 6th sitting perhaps about center on the saddle.
Photo 13 — The bone saddle in the process of being filed and intonated. We’re looking at the rear of the saddle, so the bass strings are to the left, and the treble strings to the right. The perpendicular pencil marks to the left indicate where each string will cross the saddle from the bridge pin holes, while the marks along the top of the saddle indicate the unique resting point for each string. The unisons will have the same contact points, but the strings in each octave pair will sit at different positions, relative to the front and rear of the saddle.
Photo by Andy Ellis
Once you’ve made your marks, remove the saddle and start filing away the material around each pencil mark to create a ridge for the string to rest on. Photo 13 shows a saddle in the process of being shaped, with string pairs 6-1 running from left to right. As you file, be careful not to remove the pencil marks on the top of the saddle. They are your guides, and should remain on your saddle until the final polishing.
After carving the contact points, radius the top of the saddle to match the fretboard curve, and using very fine abrasive paper, polish out the file and pencil marks. Install the saddle, string up, and check the action.
Photo 14 — The finished intonated saddle. Notice the different contact points for the strings within each octave pair. The 3rd course illustrates this quite dramatically: The high G rests toward the rear of the saddle, while the low G
sits closer to the front.
Photo by Andy Ellis
Photo 14 shows the finished saddle installed in the Guild’s bridge. If you look carefully, you can see many of these contact points and how they differ within the octave pairs. Again, this is simply an example of what worked well for our particular F-212, but it illustrates a fairly standard acoustic 12 arrangement.
If the action needs to be lowered, remove the saddle and sand down its flat bottom. Proceed very slowly. Even though it’s a hassle to repeatedly restring, tune, and check the action, that’s still a lot less work than having to start from scratch because you sanded off too much of the bottom. Once you have the action where you want it, blow the dust off the guitar, give it a polish, and start basking in its glorious chime.
Special thanks to Bob Ezrin for loaning us his 1965 Guild F-212 and EM2’s Mark Montgomery for letting us rework his ’65 Rickenbacker 360/12.
[Updated 3/24/22]
- DIY: How to Set Up a Fender Stratocaster - Premier Guitar ›
- DIY: How to Convert a Flattop to Nashville Tuning - Premier Guitar ›
- Guitar Shop 101: How to Intonate an Acoustic 12-String - Premier ... ›
- 7 ways to upgrade your guitar - Premier Guitar ›
- DIY: How to Adjust Your Guitar's Neck Relief & Truss Rod—Plus, Fix Your Action | Helmer’s How-Tos - Premier Guitar ›
- 10 Acoustic 12-Strings for All Budgets - Premier Guitar ›
- 10 Acoustic 12-Strings for All Budgets - Premier Guitar ›
- Squier Paranormal Jazzmaster XII Review - Premier Guitar ›
- Unlock Your Guitar's Potential with this Easy 4-Step Setup Guide ›
Stevie Van Zandt with “Number One,” the ’80s reissue Stratocaster—with custom paisley pickguard from luthier Dave Petillo—that he’s been playing for the last quarter century or so.
With the E Street Band, he’s served as musical consigliere to Bruce Springsteen for most of his musical life. And although he stands next to the Boss onstage, guitar in hand, he’s remained mostly quiet about his work as a player—until now.
I’m stuck in Stevie Van Zandt’s elevator, and the New York City Fire Department has been summoned. It’s early March, and I am trapped on the top floor of a six-story office building in Greenwich Village. On the other side of this intransigent door is Van Zandt’s recording studio, his guitars, amps, and other instruments, his Wicked Cool Records offices, and his man cave. The latter is filled with so much day-glo baby boomer memorabilia that it’s like being dropped into a Milton Glaser-themed fantasy land—a bright, candy-colored chandelier swings into the room from the skylight.
There’s a life-size cameo of a go-go dancer in banana yellow; she’s frozen in mid hip shimmy. One wall displays rock posters and B-movie key art, anchored by a 3D rendering of Cream’s Disraeli Gearsalbum cover that swishes and undulates as you walk past it. Van Zandt’s shelves are stuffed with countless DVDs, from Louis Prima to the J. Geils Band performing on the German TV concert seriesRockpalast. There are three copies ofIggy and the Stooges: Live in Detroit. Videos of the great ’60s-music TV showcases, from Hullabaloo to Dean Martin’s The Hollywood Palace, sit here. Hundreds of books about rock ’n’ roll, from Greil Marcus’s entire output to Nicholas Schaffner’s seminal tome, The Beatles Forever, form a library in the next room.
But I haven’t seen this yet because the elevator is dead, and I am in it. Our trap is tiny, about 5' by 5'. A dolly filled with television production equipment is beside me. There’s a production assistant whom I’ve never met until this morning and another person who’s brand new to me, too, Geoff Sanoff. It turns out that he’s Van Zandt’s engineer—the guy who runs this studio. And as I’ll discover shortly, he’s also one of the several sentinels who watch over Stevie Van Zandt’s guitars.
There’s nothing to do now but wait for the NYFD, so Sanoff and I get acquainted. We discover we’re both from D.C. and know some of the same people in Washington’s music scene. We talk about gear. We talk about this television project. I’m here today assisting an old pal, director Erik Nelson, best known for producing Werner Herzog’s most popular documentaries, like Grizzly Man and Cave of Forgotten Dreams. Van Zandt has agreed to participate in a television pilot about the British Invasion. After about half an hour, the elevator doors suddenly slide open, and we’re rescued, standing face-to-face with three New York City firefighters.
As our camera team sets up the gear, Sanoff beckons me to a closet off the studio’s control room. I get the sense I am about to get a consolation prize for standing trapped in an elevator for the last 30 minutes. He pulls a guitar case off the shelf—it’s stenciled in paint with the words “Little Steven” on its top—snaps open the latches, and instantly I am face to face with Van Zandt’s well-worn 1957 Stratocaster. Sanoff hands it to me, and I’m suddenly holding what may as well be the thunderbolt of Zeus for an E Street Band fan. My jaw drops when he lets me plug it in so he can get some levels on his board, and the clean, snappy quack of the nearly 70-year-old pickups fills the studio. For decades, Springsteen nuts have enjoyed a legendary 1978 filmed performance of “Rosalita” from Phoenix, Arizona, that now lives on YouTube. This is the Stratocaster Van Zandt had slung over his shoulder that night. It’s the same guitar he wields in the famous No Nukes concert film shot at Madison Square Garden a year later, in 1979. My mind races. The British Invasion is all well and essential. But now I’m thinking about Van Zandt’s relationship with his guitars.
Stevie Van Zandt's Gear
Van Zandt’s guitar concierge Andy Babiuk helped him plunge deeper down the Rickenbacker rabbit hole. Currently, Van Zandt has six Rickenbackers backstage: two 6-strings and four 12-strings.
Guitars
- 1957 Fender Stratocaster (studio only)
- ’80s Fender ’57 Stratocaster reissue “Number One”
- Gretsch Tennessean
- 1955 Gibson Les Paul Custom “Black Beauty” (studio only)
- Rickenbacker Fab Gear 2024 Limited Edition ’60s Style 360 Model (candy apple green)
- Rickenbacker Fab Gear 2023 Limited Edition ’60s Style 360 Model (snowglo)
- Rickenbacker 2018 Limited Edition ’60s Style 360 Fab Gear (jetglo)
- Two Rickenbacker 1993Plus 12-strings (candy apple purple and SVZ blue)
- Rickenbacker 360/12C63 12-string (fireglo)
- Vox Teardrop (owned by Andy Babiuk)
Amps
- Two Vox AC30s
- Two Vox 2x12 cabinets
Effects
- Boss Space Echo
- Boss Tremolo
- Boss Rotary Ensemble
- Durham Electronics Sex Drive
- Durham Electronics Mucho Busto
- Durham Electronics Zia Drive
- Electro-Harmonix Satisfaction
- Ibanez Tube Screamer
- Voodoo Labs Ground Control Pro switcher
Strings and Picks
- D’Addario (.095–.44)
- D’Andrea Heavy
Van Zandt has reached a stage of reflection in his career. Besides the Grammy-nominated HBO film, Stevie Van Zandt: Disciple, which came out in 2024, he recently wrote and published his autobiography, Unrequited Infatuations (2021), a rollicking read in which he pulls no punches and makes clear he still strives to do meaningful things in music and life.
His laurels would weigh him down if they were actually wrapped around his neck. In the E Street Band, Van Zandt has participated in arguably the most incredible live group in rock ’n’ roll history. And don’t forget Southside Johnny and the Asbury Jukes or Little Steven and the Disciples of Soul. He created both the Underground Garage and Outlaw Country radio channels on Sirius/XM. He started a music curriculum program called TeachRock that provides no-cost resources and other programs to schools across the country. Then there’s the politics. Via his 1985 record, Sun City, Van Zandt is credited with blasting many of the load-bearing bricks that brought the walls of South African apartheid tumbling into dust. He also acted in arguably the greatest television drama in American history, with his turn as Silvio Dante in The Sopranos.
Puzzlingly, Van Zandt’s autobiography lacks any detail on his relationship with the electric guitar. And Sanoff warns me that Van Zandt is “not a gearhead.” Instead he has an organization in place to keep his guitar life spinning like plates on the end of pointed sticks. Besides Sanoff, there are three others: Ben Newberry has been Van Zandt’s guitar tech since the beginning of 1982. Andy Babiuk, owner of Rochester, New York, guitar shop Fab Gear and author of essential collector reference books Beatles Gear and Rolling Stones Gear (the latter co-authored by Greg Prevost) functions as Van Zandt’s guitar concierge. Lastly, luthier Dave Petillo, based in Asbury Park, New Jersey, oversees all the maintenance and customization on Van Zandt’s axes.
“I took one lesson, and they start to teach you the notes. I don’t care about the notes.” —Stevie Van Zandt
I crawl onto Zoom with Van Zandt for a marathon session and come away from our 90 minutes with the sense that he is a man of dichotomies. Sure, he’s a guitar slinger, but he considers his biggest strengths to be as an arranger, producer, and songwriter. “I don’t feel that being a guitar player is my identity,” he tells me. “For 40 years, ever since I made my first solo record, I just have not felt that I express myself as a guitar player. I still enjoy it when I do it; I’m not ambivalent. When I play a solo, I am in all the way, and I play a solo like I would like to hear if I were in the audience. But the guitar part is really part of the song’s arrangement. And a great solo is a composed solo. Great solos are ones you can sing, like Jimi Hendrix’s solo in ‘All Along the Watchtower.’”
In his autobiography, Van Zandt mentions that his first guitar was an acoustic belonging to his grandfather. “I took one lesson, and they start to teach you the notes. I don’t care about the notes,” Van Zandt tells me. “The teacher said I had natural ability. I’m thinking, if I got natural ability, then what the fuck do I need you for? So I never went back. After that, I got my first electric, an Epiphone. It was about slowing down the records to figure out with my ear what they were doing. It was seeing live bands and standing in front of that guitar player and watching what they were doing. It was praying when a band went on TV that the cameraman would occasionally go to the right place and show what the guitar player was doing instead of putting the camera on the lead singer all the time. And I’m sure it was the same for everybody. There was no concept of rock ’n’ roll lessons. School of Rock wouldn’t exist for another 30 years. So, you had to go to school yourself.”
By the end of the 1960s, Van Zandt tells me he had made a conscious decision about what kind of player he wanted to be. “I realized that I really wasn’t that interested in becoming a virtuoso guitar player, per se. I was more interested in making sure I could play the guitar solo that would complement the song. I got more into the songs than the nature of musicianship.”
After the Beatles and the Stones broke the British Invasion wide open, bands like Cream and the Yardbirds most influenced him. “George Harrison would have that perfect 22-second guitar solo,” Van Zandt remembers. “Keith Richards. Dave Davies. Then, the harder stuff started coming. Jeff Beck in the Yardbirds. Eric Clapton with things like ‘White Room.’ But the songs stayed in a pop configuration, three minutes each or so. You’d have this cool guitar-based song with a 15-second, really amazing Jeff Beck solo in it. That’s what I liked. Later, the jam bands came, but I was not into that. My attention deficit disorder was not working for the longer solos,” he jokes. Watch a YouTube video of any recent E Street Band performance where Van Zandt solos, and the punch and impact of his approach and attack are apparent. At Nationals Park in Washington, D.C., last year, his solo on “Rosalita” was 13 powerful seconds.
Van Zandt and Bruce Springsteen’s relationship goes back to their earliest days on the Jersey shore. “Everybody had a different guitar; your guitar was your identity,” recalls Van Zandt. “At some point, a couple of years later, I remember Bruce calling me and asking me for my permission to switch to Telecaster. At that point, I was ready to switch to Stratocaster.”
Photo by Pamela Springsteen
Van Zandt left his Epiphone behind for his first Fender. “I started to notice that the guitar superstars at the time were playing Telecasters. Mike Bloomfield. Jeff Beck. Even Eric Clapton played one for a while,” he tells me. “I went down to Jack’s Music Shop in Red Bank, New Jersey, because he had the first Telecaster in our area and couldn’t sell it; it was just sitting there. I bought it for 90 bucks.”
In those days, and around those parts, players only had one guitar. Van Zandt recalls, “Everybody had a different guitar; your guitar was your identity. At some point, a couple of years later, I remember Bruce calling me and asking me for my permission to switch to Telecaster. At that point, I was ready to switch to Stratocaster, because Jimi Hendrix had come in and Jeff Beck had switched to a Strat. They all kind of went from Telecaster to Les Pauls. And then some of them went on to the Stratocaster. For me, the Les Paul was just too out of reach. It was too expensive, and it was just too heavy. So I said, I’m going to switch to a Stratocaster. It felt a little bit more versatile.”
Van Zandt still employs Stratocasters, and besides the 1957 I strummed, he was seen with several throughout the ’80s and ’90s. But for the last 20 or 25 years, Van Zandt has mainly wielded a black Fender ’57 Strat reissue from the ’80s with a maple fretboard and a gray pearloid pickguard. He still uses that Strat—dubbed “Number One”—but the pickguard has been switched to one sporting a purple paisley pattern that was custom-made by Dave Petillo.
Petillo comes from New Jersey luthier royalty and followed in the footsteps of his late father, Phil Petillo. At a young age, the elder Petillo became an apprentice to legendary New York builder John D’Angelico. Later, he sold Bruce Springsteen the iconic Fender Esquire that’s seen on the Born to Run album cover and maintained and modified that guitar and all of Bruce’s other axes until he passed away in 2010. Phil worked out of a studio in the basement of their home, not far from Asbury Park. Artists dropped in, and Petillo has childhood memories of playing pick-up basketball games in his backyard with members of the E Street Band. (He also recalls showing his Lincoln Logs to Johnny Cash and once mistaking Jerry Garcia for Santa Claus.)
“I was more interested in making sure I could play the guitar solo that would complement the song. I got more into the songs than the nature of musicianship.” —Stevie Van Zandt
“I’ve known Stevie Van Zandt my whole life,” says Petillo. “My dad used to work on his 1957 Strat. That guitar today has updated tuners, a bone nut, new string trees, and a refret that was done by Dad long ago. I think one volume pot may have been changed. But it still has the original pickups.” Petillo is responsible for a lot of the aesthetic flair seen on Van Zandt’s instruments. He continues, “Stevie is so much fun to work with. I love incorporating colors into things, and Stevie gets that. When you talk to a traditional Telecaster or Strat player, and you say, ‘I want to do a tulip paisley pickguard in neon blue-green,’ they’re like, ‘Holy cow, that’s too much!’ But for Stevie, it’s just natural. So I always text him with pickguard designs, asking him, ‘Which one do you like?’ And he calls me a wild man; he says, ‘I don’t have that many Strats to put them on!’ But I’ll go to Ben Newberry and say, ‘Ben, I made these pickguards; let’s get them on the guitar. And I’ll go backstage, and we’ll put them on. I just love that relationship; Stevie is down for it.”
Petillo takes care of the electronics on Van Zandt’s guitars. Almost all of the Strats are modified with an internal Alembic Stratoblaster preamp circuit, which Van Zandt can physically toggle on and off using a switch housed just above the input jack. Van Zandt tells me, “That came because I got annoyed with the whole pedal thing. I’m a performer onstage, and I’m integrated with the audience and I like the freedom to move. And if I’m across the stage and all of a sudden Bruce nods to me to take a solo, or there’s a bit in the song that requires a little bit of distortion, it’s just easier to have that; sometimes, I’ll need that extra little boost for a part I’m throwing in, and it’s convenient.”
In recent times, Van Zandt has branched out from the Stratocaster, which has a lot to do with Andy Babiuk's influence. The two met 20 years ago, and Babiuk’s band, the Chesterfield Kings, is on Van Zandt’s Wicked Cool Records. “He’d call me up and ask me things like, ‘What’s Brian Jones using on this song?’” explains Babiuk. “When I’d ask him why, he’d tell me, ‘Because I want to have that guitar.’ It’s a common thing for me to get calls and texts from him like that. And there’s something many people overlook that Stevie doesn’t advertise: He’s a ripping guitar player. People think of him as playing chords and singing backup for Bruce, but the guy rips. And not just on guitar, on multiple instruments.”
Van Zandt tells me he wanted to bring more 12-string to the E Street Band this tour, “just to kind of differentiate the tone.” He explains, “Nils is doing his thing, and Bruce is doing his thing, and I wanted to do more 12-string.” He laughs, “I went full Paul Kantner!” Babiuk helped Van Zandt plunge deeper down the Rickenbacker rabbit hole. Currently, Van Zandt has six Rickenbackers backstage: two 6-strings and four 12-strings. Each 12-string has a modified nut made by Petillo from ancient woolly mammoth tusk, and the D, A, and low E strings are inverted with their octave.
Van Zandt explains this to me: “I find that the strings ring better when the high ones are on top. I’m not sure if that’s how Roger McGuinn did it, but it works for me. I’m also playing a wider neck.”
Babiuk tells me about a unique Rick in Van Zandt’s rack of axes: “I know the guys at Rickenbacker well, and they did a run of 30 basses in candy apple purple for my shop. I showed one to Stevie, and purple is his color; he loves it. He asked me to get him a 12-string in the same color, and I told him, ‘They don’t do one-offs; they don’t have a custom shop,’ but it’s hard to say no to the guy! So I called Rickenbacker and talked them into it. I explained, ‘He’ll play it a lot on this upcoming tour.’ They made him a beautiful one with his OM logo.”
The purple one-off is a 1993Plus model and sports a 1 3/4" wide neck—1/8" wider than a normal Rickenbacker. Van Zandt loved it so much that he had Babiuk wrestle with Rickenbacker again to build another one in baby blue. Petillo has since outfitted them with paisley-festooned custom pickguards. When guitar tech Newberry shows me these unique axes backstage, I can see the input jack on the purple guitar is labeled with serial number 01001.“Some of my drive is based on gratitude,” says Van Zandt, “feeling like we are the luckiest guys in the luckiest generation ever.”
Photo by Rob DeMartin
Van Zandt also currently plays a white Vox Teardrop. That guitar is a prototype owned by Babiuk. “Stevie wanted a Teardrop,” Babiuk tells me, “but I explained that the vintage ones are hit and miss—the ones made in the U.K. were often better than the ones manufactured in Italy. Korg now owns Vox, and I have a new Teardrop prototype from them in my personal collection. When I showed it to him, he loved it and asked me to get him one. I had to tell him, ‘I can’t; it’s a prototype, there’s only one,’ and he asked me to sell him mine,” he chuckles. “I told him, ‘It’s my fucking personal guitar, it’s not for sale!’ So I ended up lending it to him for this tour, and I told him, ‘Remember, this is my guitar; don’t get too happy with it, okay?’
“He asked me why that particular guitar sounds and feels so good. Besides being a prototype built by only one guy, the single-coil pickups’ output is abnormally hot, and the neck feels like a nice ’60s Fender neck. Stevie’s obviously a dear friend of mine, and he can hold onto it for as long as he wants. I’m glad it’s getting played. It was just hanging in my office.”
Van Zandt tells me how Babiuk’s Vox Teardrop sums up everything he wants from his tone, and says, “It’s got a wonderfully clean, powerful sound. Like Brian Jones got on ‘The Last Time.’ That’s my whole thing; that’s the trick—trying to get the power without too much distortion. Bruce and Nils get plenty of distortion; I am trying to be the clean rhythm guitar all the time.”
If Van Zandt has a consigliere like Tony Soprano had Silvio Dante, that’s Newberry. Newberry has tech’d nearly every gig with Van Zandt since 1982. “Bruce shows move fast,” he tells me. “So when there’s a guitar change for Stevie, and there are many of them, I’m at the top of the stairs, and we switch quickly. There’s maybe one or two seconds, and if he needs to tell me something, I hear it. He’s Bruce’s musical director, so he may say something like, ‘Remind me tomorrow to go over the background vocals on “Ghosts,”’ or something like that. And I take notes during the show.”
“Everybody had a different guitar; your guitar was your identity. At some point, a couple of years later, I remember Bruce calling me and asking me for my permission to switch to a Telecaster.” —Stevie Van Zandt
When I ask Newberry how he defines Van Zandt’s relationship to the guitar, he doesn’t hesitate, snapping back, “It’s all in his head. His playing is encyclopedic, whether it’s Bruce or anything else. He may show up at soundcheck and start playing the Byrds, but it’s not ‘Tambourine Man,’ it’s something obscure like ‘Bells of Rhymney.’ People may not get it, but I’ve known him long enough to know what’s happening. He’s got everything already under his fingers. Everything.”
As such, Van Zandt says he never practices. “The only time I touch a guitar between tours is if I’m writing something or maybe arranging backing vocal harmonies on a production,” he tells me.
Before we say goodbye, I tell Van Zandt about my time stuck in his elevator, and his broad grin signals that I may not be the only one to have suffered that particular purgatory. When I ask him about the 1957 Stratocaster I got to play upon my release, he recalls: “Bruce Springsteen gave me that guitar. I’ve only ever had one guitar stolen in my life, and it was in the very early days of my joining the E Street Band. I only joined temporarily for what I thought would be about seven gigs, and in those two weeks or so, my Stratocaster was stolen. It was a 1957 or 1958. Bruce felt bad about that and replaced that lost guitar with this one. So I’ve had it a long, long time. Once that first one was stolen, I decided I would resist having a personal relationship with any one guitar. But that one being a gift from Bruce makes it special. I will never take it back on the road.”
After 50 years of rock ’n’ roll, if there is one word to sum up Stevie Van Zandt, it may be “restless”—an adjective you sense from reading his autobiography. He gets serious and tells me, “I’m always trying to catch up. The beginning of accomplishing something came quite late to me. I feel like I haven’t done nearly enough. What are we on this planet trying to do?” he asks rhetorically. “We’re trying to realize our potential and maybe leave this place one percent better for the next guy. And some of my drive is based on gratitude, feeling like we are the luckiest guys in the luckiest generation ever. That’s what I’m doing: I want to give something back. I feel an obligation.”
YouTube It
“Rosalita” is a perennial E Street Band showstopper. Here’s a close-up video from Philadelphia’s Citizens Bank Park last summer. Van Zandt’s brief but commanding guitar spotlight shines just past the 4:30 mark.
Follow along as we build a one-of-a-kind Strat featuring top-notch components, modern upgrades, and classic vibes. Plus, see how a vintage neck stacks up against a modern one in our tone test. Watch the demo and enter for your chance to win this custom guitar!
With over 350 effects models, 120 sampling slots, and a Groove Station with a 480-second looper, this pedal offers unparalleled versatility for guitarists worldwide.
In 2025, MOOER has announced that it will be set to release its latest multi-effects pedal, the GS1000 Intelligent Amp Profiling Processor, an augmented intelligent amp profiling processor. Built on MOOER’s advanced third-generation digital platform, the GS1000 introduces groundbreaking MNRS 2.0 technology, allowing guitarists around the world to emulate their favorite gear with immense precision–specifically, for distortion pedals, preamps, amplifier heads, and cabinets.
With this innovation, guitarists can fully capture the essence of their favorite guitar gear without owning the physical hardware, enabling them to carry their favorite tones wherever they go. Users are even able to use third-party IRs for cabinets of their choice, further enhancing the flexibility of this feature.
It’s unforgettable how much MOOER’s multi-effects pedals have impressed audiences so far, primarily thanks to their robust tone libraries. However, even still, the GS1000 continues to build upon this with storage for up to 120 sampling profiles, along with continued integration with the MOOER Cloud app. Essentially, this cloud integration facilitates infinite upload and download possibilities, giving users access to a global community of shared tones, widely expanding the number of accessible tones. More still, the GS1000’s previously mentioned third-party IR cabinet simulations support up to 2048 sample points, guaranteeing studio-grade tonal accuracy across the board.
Even more impressive for the price is how the GS1000 inherits the dual-chain effects architecture that made previous MOOER gear so versatile, making it suitable for highly complex usage scenarios. With over 350 factory effects models and a Sub-Patch preset grouping mode, the GS1000 makes it far simpler for users to make seamless transitions between tones, all while maintaining effect tails to guarantee seamless transitions. Additionally, the reintroduction of the innovative AI-driven EQ Master builds upon MOOER devices’ previous capabilities, using intelligent adjustments in real-time to match the musical style of players to tones, while still allowing manual tweaks for precise control.
Impressively, the GS1000 also comes packed with a Groove Station module, consisting of a combination of drum machine and looper features–including 56 high-quality drum kits! It offers a 480-second phrase looper with infinite overdubs, automated detection, and synchronization capabilities, resulting in an intuitive platform for solo jamming, composition, and live loop-based performance. Overall, the Groove Station acts as an all-in-one suite for creating full arrangements, without having to depend on additional backing tracks or bandmates.
Visually and functionally, the GS1000 really stands out thanks to its sleek visual design and enhanced user experience. For example, it features a convenient 5-inch high-resolution touchscreen, which is also paired with ambient lighting to add a visually stunning element to the pedal. As a result, the GS1000 is not only designed for convenient touch-based control but also as a standout centerpiece in any guitar rig.
In addition to this touchscreen control system, the GS1000 also provides expanded connectivity options, improving upon the already impressive flexibility of past pedals. Most notably, it supports connectivity with the MOOER F4 wireless footswitch, as well as the ability to control presets via external MIDI devices.
As is expected from MOOER these days, the GS1000 also excels when it comes to routing opportunities, going above and beyond the typical stereo ¼” inputs and outputs that would be expected from other brands. Yes, it still includes such staples, but it also includes an XLRmicrophone input, alongside balanced TRS outputs for long-distance signal clarity. The configurable serial/parallel stereo effects loop enables seamless integration of external effects, and the addition of Bluetooth audio input and MIDI compatibility broadens its wide range of use cases for live and practice-based applications.
Furthermore, the pedal also serves as a professional audio solution thanks to its low-latency 2-in/2-out ASIO USB sound card. Supporting up to 192kHz sampling rates, the GS1000 makes recording and live streaming effortless, as it can easily be used with software DAWs, MOOER’s editing software, as well as the USB-based MIDI control.
The GS1000 will be available in two versions–the standard white edition, which is powered by mains power, and the GS1000 Li version, which introduces a 7.4V 4750mAh lithium battery, chargeable through its power port. With this upgrade, users can enjoy up to six hours of continuous power-free playtime, making it ideal for practicing, busking, and generally performing on the go.
Overall, for fans of MOOER’s previous amp simulation offerings, the GS1000 represents a natural evolution, building on everything that made its predecessors great while introducing cutting-edge features and expanded capabilities. Most importantly, MOOER has promised to continuously update its MOOER 4.0 tonal algorithms on the MOOER Cloud in line with therelease, keeping things fresh for the company’s dedicated user base.
- MNRS 2.0 sampling technology for emulating distortion pedals, preamps, amplifier heads, and cabinets
- Over 350 original factory effects models
- 120 sampling slots with upload/download support via the MOOER Cloud app
- Supports third-party cabinet IR files up to 2048 sample points
- Integrated Groove Station with a drum machine and 480-second looper, featuring infinite overdubs and synchronization capabilities
- 54 high-quality drum kits
- 4 metronome tones
- Tap-tempo control for timing effects
- Advanced AI-driven EQ Master for intelligent tone adjustment based on music styles, with manual customization options
- Built-in high-precision digital tuner
- Quick-access dual-chain effects architecture for seamless creative workflows
- 5-inch high-resolution touchscreen with ambient lighting for enhanced usability
- Four multi-purpose footswitches
- Configurable serial/parallel TRS stereo effects loop for external effects integration
- 6.35mm instrument input and XLR microphone input for expanded connectivity
- Balanced TRS stereo outputs for long-distance signal transmission without quality loss
- Bluetooth audio input functionality for accompaniment playback
- Low-latency ASIO 2-in/2-out USB sound card supporting up to 192kHz sampling rate
- MIDI controller compatibility for managing presets and features
- USB-C port for preset management, USB audio, and USB MIDI functionality
- Supports MOOER F4 wireless footswitch for extended control
- Also available as the GS1000 Li, which features a built-in 7.4V 4750mAh lithium battery, offering up to 6 hours of continuous playtime, chargeable through the power port
The GS1000 will be available from the official distributors and retailers worldwide on January 16th, 2025.
For more information, please visit mooeraudio.com.
Hand-crafted in Petaluma, California, this amp features upgrades while maintaining the original's legendary tone.
The Mesa/Boogie Dual Rectifier Solo Head’s arrival in 1992 was a watershed moment for alternative rock and metal that changed everything; heavy music would never sound the same again, and the Dual Rectifier’s crushing, harmonically rich tone became the most sought-after guitar sound of the era. With a feel as empowering as its sound, the Rectifiers provided an ease of playing that supported and elevated proficiency and was inspirational, rewarding, and addictive.
Its sound and impact on the generation that used it to define what rock music would become were as sweeping as they have been lasting. And it remains arguably the most modeled in today’s digital amp landscape. Now, the 90s Dual Rectifier is back with a vengeance, built in Petaluma, California, by the same artisans who made the originals the most desirable high-gain guitar amplifier of all time.
For more information, please visit mesaboogie.com.