
Fig. 1
Here’s a different way to unleash the beast within your tracks.
Welcome to another Dojo. Last month I explained in detail how to set up and use sidechain compression techniques to get that classic pop/EDM pumping sound on your rhythm guitar parts and other instruments in your mix. This time, we’ll use the same setup techniques but, instead of sidechaining a compressor, I’m going to show you the benefits of using a gate.
What is a gate? It’s an audio circuit design (hardware or software) that operates relative to a set threshold, much like a compressor. The key difference is that while a compressor reduces the dynamic range (volume) when the audio signal goes above the threshold, a gate reduces the volume of an audio signal when it goes below the threshold and cuts it off completely.
For those of you who play rock, prog, extreme metal, or anything that uses massive gain, you most likely use a noise gate to tame the excessive pedal/amp noise (and possibly even feedback) that would otherwise run harum-scarum over every second of silence—in between each palm mute, pick stroke, etc. The net result is super tight and punchy guitars that can stop on a dime.
The net result of using a gate instead of a compressor is that the guitar solo track will open up instead of closing down.
Let’s get crazy from the start. Take a song you’ve recorded that has multiple instruments (full band with vocals or similar). Next, create a new guitar track and record yourself playing a wicked solo for the entire song. (I was guilty of this when I first learned the pentatonic scale.) Make it as wild as you want and add lots of signal processing as well. Unleash your inner guitar demon.
Once you’ve accepted your award for “longest guitar solo,” place a gate plug-in on the track. I’m going to use FabFilter Pro-G ($179 Street), but another great choice is Waves C1 Compressor/Gate ($29 Street).
Now, we can get into some uncharted waters. Choose a track (like the snare drum, chorus BGV parts, or a cool rhythm part) and route the output of that track to the gate’s input on your new guitar-solo-from-hell track. Every DAW has slightly different ways to do sidechaining, so like last month (see August’s column “Try Sidechaining for Greater Expression”), I’m going to use Pro Tools and follow the exact same procedure—the only difference is that this time it’s a gate and not a compressor. I’m also reposting the same link as well, with instructions for non-Pro Tools users courtesy of the Fab Filter website support page that gives directions for Studio One, Logic, Cubase, and Ableton.
The net result of using a gate instead of a compressor is that the guitar solo track will open up instead of closing down. For example, every time the snare drum hits, you will briefly hear wherever you were in your new solo track. You then can fine-tune how little or long it stays audible before being forced back into submission.
Fig. 2
In Pro Tools, open up the gate plug-in you placed on your guitar solo track [Fig. 1] and set sidechain from internal (In) to external (Ext). Next, in the “key input” menu of the plug-in interface, which is just above the FabFilter logo [Fig. 2], choose Bus 1 instead of the default “no key input.” The gate is now looking for an external source to trigger it open.
In Pro Tools, open up the gate plug-in you placed on your guitar solo track [Fig. 1] and set sidechain from internal (In) to external (Ext). Next, in the “key input” menu of the plug-in interface, which is just above the FabFilter logo [Fig. 2], choose Bus 1 instead of the default “no key input.” The gate is now looking for an external source to trigger it open.
Fig. 3
Now, let’s bus-route the snare drum track to the gate on the guitar track. In the “sends” slot of the snare drum track, select Bus 1. The Bus view window for Bus 1 will pop up [Fig. 3]. Set its level to 0.0 dB (so it will send audio signal to the gate) and select “PRE” (pre-fader) [Fig. 4]. You’ve now routed the audio (using Bus 1) from the drum track to the gate’s sidechain input on the guitar track.
Fig. 4
If you mute the snare drum track, you’ll be able to hear how it is affecting the guitar track. Now you can play with the threshold, attack, ratio, and release. Start with a quick attack (.010-.025 ms), a high threshold, and a medium release time (150-200 ms), then adjust to taste.
I love doing things like this because every time the snare drum hits, you don’t know what you’re going to get. You can take this farther and add some reverb and delay to the guitar track to further play with how long the solo “blip” will last. This is just the tip of the iceberg, so keep experimenting and let me know if you find something really cool by emailing me here. Keep sharing your musical passion with the world and, until next time, namaste.
Just like guitarists, audiophiles are chasing sound. It may be a never-ending quest.
“What you got back home, little sister, to play your fuzzy warbles on? I bet you got, say, pitiful, portable picnic players. Come with uncle and hear all proper. Hear angel trumpets and devil trombones.”—Alexander DeLarge (Malcolm McDowell) in the film A Clockwork Orange.
We listen to recorded music for enjoyment and inspiration, but few of us expect recordings to rival the experience of live music. Most guitarists know that the average home sound system, let alone Bluetooth boomboxes, cannot reproduce the weight and depth equal to standing in a room with a full-blown concert guitar rig. Also, classical music lovers recognize that a home system won’t reproduce the visceral envelope of a live orchestra. Still, much like guitarists, audiophiles spend huge amounts of time and money chasing the ultimate “realistic” audio experience. I wonder if sometimes that’s misguided.
My exposure to the audio hobby came early, from my father’s influence. My dad grew up in the revolution of home electronics, and being an amateur musician, he wanted good reproduction of the recordings he cherished. This led him to stock our home with tube components and DIY electrostatic hybrid speakers that rivaled the size and output of vintage Fender 2x12s. I thought this was normal.
Later, I discovered a small shop in my hometown that specialized in “high end” audiophile gear. They had a policy: No sale is final until you are completely satisfied. I became an almost weekly visitor (and paying customer) and was allowed to take equipment home to audition, which was dangerous for a young man on a low budget. It was through this program I started to understand the ins and outs of building a cohesive system that met my taste. I began to pay much more attention to the nuances of audio reproduction. Some gear revealed a whole new level of accuracy when it came to acoustic or vocal performance, while lacking the kick-ass punch I desired of my rock albums. I was seeking reproduction that would gently caress the sounds on folk, classical, and jazz recordings, but could also slay when the going got heavy. This made me a bit of an odd bird to the guys at the audio shop, but they wanted to please. With their guidance I assembled some decent systems over time, but through the decades, I lost interest in the chase.
Recently, I’ve begun perusing online audiophile boards and they seem oddly familiar, with tube versus solid-state discussions that might feel at home to guitarists—except the prices are now beyond what I’d imagined. For the most part, they mirror the exchanges we see on guitar boards minus the potty-mouth language. Enthusiasts exchange information and opinions (mostly) on what gear presents the widest soundstage or most detailed high-frequency delivery, all in flowery language usually reserved for fine wines.
Speaking of whining, you’ll rethink your idea of expensive cables when you hear folks comparing 18", $1,700 interconnects for their DACs. Some of the systems I’ve seen are more costly than an entire guitar, amplifier, and studio gear collection by a serious margin. Mostly, the banter is cordial and avoids the humble-bragging that might go along with the purchase of a $10,000 set of PAF humbuckers. Still, I have a lack of insight into what exactly most are trying to accomplish.
If you’ve ever worked in a big-time studio, you know that the soundscape blasting out of huge monitors is not what most of us have in our homes. My experience rewiring pro-studio patchbays is that less emphasis is placed on oxygen-free, silver-plated, directional cables than the room treatment. I’ve found myself wondering if the people on those audio boards—who have spent many tens or even hundreds of thousands of dollars on their home systems—have ever been in a studio control room listening to music as loud as a 28,000 horsepower traffic jam of NASCAR racers. That might be an eye-opener.
One of my takeaways is that even though music recording began as an attempt to reproduce what actually happens in a room, it hasn’t been just that for a long time. With all our effects and sonic wizardry on display, recording is like playing an instrument itself, and much more complex. This is not a new revelation to Beatles fans.
What amazes me is that both audiophiles and guitar fanatics pursue the sounds we hear on recordings for differing reasons and with subjective results. It’s a feedback-loop game, where we chase sounds mostly exclusive to the studio. So, how do we determine if our playback is accurate? Will we ever be satisfied enough to call the sale final?
I’m not convinced, but just the same, I’ll continue my own search for the holy grail of affordable, kick-ass sound that still loves a folk guitar
Kirk Hammett has partnered with Gibson Publishing to release The Collection: Kirk Hammett, a premium hardcover coffee-table photo book where Kirk tells the stories behind his rare and collectible instruments.
“I am thrilled to announce the launch of The Collection: Kirk Hammett. I’ve worked diligently on this curated collection of vintage and modern guitars for the book. I feel the book captures the rich history and artistry behind each of these unique and rare instruments. Every picture tells a story and thanks to Ross Halfin and his exceptional photography, every picture in this book is worth a million words! This book could not be possible without the help of Gibson, so I’d like to thank them for making my passion for Greeny, and guitars a reality. I hope all of you enjoy this journey as much as I did.”
“It’s exciting the time has come to release The Collection: Kirk Hammett by Gibson,” adds Cesar Gueikian, President and CEO of Gibson. “We have been working on this project with Kirk for years now, and I had the opportunity to work closely with Kirk on the composition of the collection for the book. It was a thrill to put this together and it took a village to get it done! I hope everyone appreciates the work that went into this book and enjoys every story behind the guitars.”
The Collection: Kirk Hammett, Custom Edition is limited to just 300 numbered copies signed by KIRK HAMMETT and comes in a huge 19 x 14.5” (490 x 370mm) presentation box featuring custom artwork and an outstanding case candy package. In addition to the large-format 17 x 12” (432 x 310mm) hardcover version of the book with a stunning lenticular cover, the boxset includes a frameable 16 x 11.6” (407 x 295mm) art print of a Ross Halfin portrait of KIRK HAMMETT signed by both Halfin and the Metallica guitarist. Other case candy includes an Axe Heaven miniature replica of Hammett’s 1979 Gibson Flying V with case and stand, an exclusive pick tin complete with six Dunlop® Kirk Hammett signature Jazz III guitar picks, and a Gibson Publishing Certificate of Authenticity.
Explore The Collection: Kirk Hammett book HERE.
The collection includes Cobalt strings with a Paradigm Core, Tim Henson Signature Classical Strings, and the Tim Henson Signature FretWrap by Gruv Gear.
Engineered for maximum output, clarity, and durability, these strings feature:
- Cobalt with a Paradigm Core (not RPS) for added durability
- Nano-treated for maximum lifespan and corrosion resistance
- Gauges 9.5, 12, 16, 26, 36, 46 (Turbo Slinky set)
- Available individually or as part of the Tim Henson Signature Bundle
Tim Henson Signature Classical Strings
Crafted for dynamic, percussive tonality, these strings pair fluorocarbon trebles with silver-plated copper basses to deliver exceptional response and clarity.
- Gauges: 24, 27, 33, 30, 36, 42
- Available individually or as part of the Tim Henson Signature Bundle
Tim Henson Signature FretWrap by Gruv Gear
An essential string-dampening tool, the Tim Henson Signature FretWrap is designed for cleaner playing by eliminating unwanted overtones and sympathetic vibrations.
- Features Tim Henson’s custom ‘Cherub Logo’ design
- Size Small, fits 4-string basses, 6-string electric/acoustic guitars, and ukuleles
- Ideal for live performance and studio recording
- Ernie Ball collaboration with Gruv Gear
- Available individually or as part of the Tim Henson Signature Bundle
The Ernie Ball Tim Henson Accessory Bundle Kit
For players who want the complete Tim Henson experience, the Ernie Ball Tim HensonSignature Bundle Kit includes:
- Tim Henson Signature Electric Strings (9.5-46)
- Tim Henson Signature Classical Strings (Medium Tension)
- Tim Henson Signature FretWrap by Gruv Gear (Small)
- Tim Henson Signature Cable (Exclusive 10ft white dual-conductor cable, only available in the bundle)
The Tim Henson Signature String & Accessory Collection is available starting today, March 19, 2025, at authorized Ernie Ball dealers worldwide.
For more information, please visit ernieball.com.
Ernie Ball: Tim Henson Signature Electric Guitar Strings - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.Teamwork makes the dream work for the Charleston, South Carolina, twosome, who trade off multi-instrumental duties throughout their sets.
Michael Trent and Cary Ann Hearst have been making music as Shovels & Rope since 2008. The husband-and-wife duo from South Carolina specialize in rootsy, bluesy rock, Americana, and alt-country, but they don’t confine themselves to traditional two-piece arrangements. They switch off on vocal, guitar, percussion, and synth duty throughout their shows, orchestrating a full-band ruckus with all available limbs.
Their seventh full-length, Something Is Working Up Above My Head, released in September last year, and while touring in support of it, they stopped at Nashville’s Brooklyn Bowl in late February. PG’s John Bohlinger caught up with Trent before the gig to see what tools he and Hearst use to maintain their musical juggling act.
Brought to you by D’Addario.Black Bird
Trent’s not a guitar snob: Generally speaking, he plays whatever he can get his hands on. While playing Eddie Vedder’s Ohana Fest, someone loaned him this Gretsch Black Falcon, and he fell in love with it. He likes its size compared to the broader White Falcon. It’s also the band’s only electric, so if it goes down, it’s back to acoustic. Hearst takes turns on it, too.
Trent loads the heaviest strings he can onto it, which is a set of .013s. It lives in standard tuning.
Ol' Faithful
As Trent explains, he and Hearst have done some DIY decorating on this beautiful Gibson J-45—it’s adorned with sweat droplets, stains, and fingernail dust. It runs direct to the venue’s front-of-house system with an LR Baggs pickup. This one is strung with Martin heavy or medium gauge strings; lighter ones are too prone to snapping under Trent’s heavy picking hand (which holds a Dunlop Max-Grip .88 mm pick). And it rolls around in an Enki tour case.
On Call
These second-stringers—a Loar archtop and an LR Baggs-equipped Recording King—are on hand in case of broken strings or other malfunctions.
Need for Tweed
Trent doesn’t trust amps with too many knobs, so this tweed Fender Blues Junior does the trick. It can get fairly loud, so there’s a Universal Audio OX Amp Top Box on hand to tame it for some stages.
Shovels & Rope's Pedalboard
Because Trent and Hearst trade off bass, guitar, keys, and percussion duties, all four of their limbs are active through the set. Whoever is on guitars works this board, with an MXR Blue Box, Electro-Harmonix Nano Big Muff, EarthQuaker Devices Hummingbird, and Boss OC-5, plus a pair of Walrus Canvas Tuners for the electric and acoustic. Utility boxes on the board include a Walrus Canvas Passive Re-Amp, Radial J48, Livewire ABY1, and a Mesa Stowaway input buffer.
A Roland PK-5 MIDI controller, operated by foot, sits on the lower edge of the board. It controls the board for “Thing 2,” one of two MicroKORG synths onstage.
Thing 1 and Thing 2
There’s no one backstage helping Hearst and Trent cook up all their racket; they handle every sound themselves, manually. During the first few sets of a tour, you’re liable to see some headaches, like forgetting to switch synth patches during a song, but eventually they hit a rhythm.
Affectionately given Seuss-ian nicknames, this pair of microKORGs handles bass notes through the set, among other things, via the foot-controlled PK5. “Thing 1” is set up at the drum station, and runs through a board with an EHX Nano Big Muff, EHX Bass9, EHX Nano Holy Grail, and a Radial Pro DI. A Walrus Aetos keeps them all powered up.
The board for “Thing 2,” beside the guitar amps, includes an EHX Mel9 and Bass9 powered by a Truetone 1 SPOT Pro, plus a Radial ProD2.