
From $99 to $4000, we look at 18 tools for micing your cab.
Think about the inspiration we’ve all had from hearing an amazing electric guitar recording. I know it’s literally altered my career path, and I’m sure countless others will have similar stories. But getting that perfect sound from the speaker to tape is no easy task. There are infinite combinations of pickups, strings, amps, cables, instruments and players, each with their own tonality (and an endless number of opinions, too!). However, right up there in the order of importance is certainly the choice of microphone. Each selection will add a little something different to the sound, and no one choice is always the right one.
The Mics
Shure SM57 List: $170 Certainly a classic, this reliable, rugged dynamic mic has a frequency response of 40Hz–15kHz. Its relatively tight cardioid polar pattern and ability to take high volumes make it a first-call on many sessions. Due to its aggressive mid-range growl, it’s a perfect companion to blend with “darker” mics. When it comes to bang for the buck, the SM57 is hard to beat. Download Audio | Royer R-121 List: $1395 The R-121 is a dynamic Ribbon mic with a Figure-8 polar pattern. Like other ribbons, it’s warm, creamy and natural. Unlike most other ribbons, it was built to take a max SPL rating of 135dB, making it a great cabinet mic. Also, by turning it around and reversing the phase, the back is sonically brighter at distances of two feet and closer. We found its face-front sound to be one of our favorites overall for warmth and character—a perfect blend with an SM57. Download Audio | Neumann U 87 (Ai) List: $3998 Another legendary classic, this large diaphragm mic has three polar patterns (cardioid, omni, figure-8). We used an older model in cardioid mode, but the new Ai version has circuitry to increase the headroom by 10dB. With the rear switch attenuated, the U 87 can take up to 127dB and has a frequency response of 20Hz–20kHz. You can hear the “beef” on both clean and distorted parts, and very nice attitude on distorted sound. Download Audio |
Shure SM58 List: $188 Almost always thought of as a vocal mic, sometimes you just have to put one up on a cabinet. Like the SM57, its price, midrange peak, 50Hz–15kHz frequency response and ability to handle massive gain make it a mic drawer classic. Essentially a 57 with a different grill and more girth, it sounded surprisingly good on the clean parts. Download Audio | Earthworks QTC1 (Same as QTC40) List: $1295 An omni? Sure, why not! The QTC’s small diaphragm gives it a realistic and accurate sound. A super-wide frequency range of 4Hz–40kHz and max acoustic input of 142dB SPL make it a great option. It had a very natural sound—what you heard in the room is what came out of the speakers. Download Audio | Sennheiser MD 421 List: $598 A cardioid mic with a five-position bass rolloff (to help eliminate proximity effect), this mic is a classic tone heard for decades now. Its frequency response of 30Hz–17kHz and ability to take very high SPLs give it a full, round sound. It works great with other mics, and by itself sounded warm and full, with slightly rolled off highs. Download Audio |
Beyerdynamic M 160 List: $799 The M 160 is a hypercardioid, dynamic ribbon mic that has two ribbons arranged one above the other a half-millimeter apart. It’s got a max SPL of 129dB and a frequency response of 40Hz–18 kHz. Its big, ribbony sound is always a favorite for good reason. Download Audio | Audix i5 List $179 The i5 is a dynamic, general-purpose mic with a cardioid polar pattern. It has a frequency response of 50Hz–16kHz and a max SPL of 140dB—so it can take it hard. It sounds like a 57, but with additional presence and upper mid clarity, and would make a great partner with a MD 421 or Royer. Download Audio | Audio-Technica AT4060 List: $1665 This is a large cardioid, vacuum tube condenser with a large, 2-micron-thick gold diaphragm and separate power supply. It features 20Hz–20kHz specs and can take up to 131dB SPL, which is a lot for a tube mic. While it may not be the best call by itself, it would make a nice mic to put back around 3–4 feet for some additional room sound. Download Audio |
Coles 4038 List: N/A The 4038 is a studio ribbon mic designed by the BBC for broadcasting and recording. It’s bidirectional (figure-8) with a frequency response of 30Hz–15kHz and can take up to 125dB SPL—although we had to move this back to 11 inches for breakup factor. Another classic ribbon sound with the softened highs and warm overall tone, there’s no denying this one. Download Audio | Audio-Technica AT4047/SV List: $745 This good-looking condenser mic has a wide frequency response of 20Hz–18kHz and the ability to take up to 159dB SPL with the 10dB pad in. There’s a switchable 80Hz hi-pass filter as well, and it features a gold plated dualdiaphragm capsule design. It captured both crisp highs and a well-rounded bottom. Download Audio | AKG 414 B-ULS List: $1349 Wow, another classic. The 414 has five switchable polar patterns (omni, wide cardioid, cardioid, hyper cardioid, figure-8) and a large, 1-inch diaphragm. It’s got 20Hz–20kHz frequency response and a max SPL of up to 158 with -18dB of attenuation switched in. We set it to cardioid, no pad. This mic cuts through a mix well and has lots of attitude. Download Audio |
EV RE20 List: $750 Often referred to as the “donkey dick” mic, this large diaphragm dynamic cardioid monster routinely seen and heard on radio/TV broadcasts has a frequency response of 45Hz–18kHz. Commonly used in guitar session work, it makes a great complement to other mics, such as the 57. We used a PL15, which is basically the same model. It’s got great low end in both the clean and distorted parts… smooth upper mids and not too much high end. Download Audio | Shure SM7B List: $619 This dynamic is often viewed as a radio mic, but it has a smooth sound and 50Hz–20kHz frequency response. There are bass roll-off and mid-range emphasis switches, but we set it flat. With an immediately pleasing sound both clean and distorted, it’s got a bottom-heavy focus that works great alone or in conjunction with a brighter mic—great attitude. Download Audio | M-Audio Luna List: $399 Now available as the Luna II, this cardioid condenser has a large, solid brass capsule, Class-A electronics and a 10dB pad, which lets it handle up to 140dB SPL. It has a good, full low end and smooth mids, especially on the distorted tracks, and is well balanced. Download Audio |
Heil PR 40 List: $375 A dynamic supercardioid mic from Heil Sound, it features a large low-mass aluminum diaphragm, a heavy steel case and a wide frequency response from 28Hz–18kHz. Very nice bottom and high end, almost nondescript in a positive way. It sounds really cool with a Coles 4038, or the like. Download Audio | B&K 4006 List: $1925 (as DPA 4006) Now labeled under the DPA name, this high-end, phantom-powered omni mic is often used in classical recordings. Its got an extremely linear frequency response from 20Hz–20kHz, and can take up to 143dB max SPL. It sounds quite natural, with non-extended highs and lows that give you back just what you put in front of it. Download Audio | Reslo List: N/A A classic English ribbon mic from the early sixties, it’s got a frequency response of 40Hz–15kHz… no wonder it can be heard on some of those classic Beatles recordings. The output sounds like analog tape through an old tube console. Download Audio |
Below, Grammy Award Winning engineer/producer Pete Moshay and I put a nice selection of mics up on an electric guitar session, all ranging in street price from $99 to over $4000. From the desert island Shure SM57 to a vintage Coles 4038 ribbon, there’s something for everyone.
The Method
I recorded two guitar licks directly into Pro Tools HD at 24-bit, 48kHz using a Creation Audio Labs MW1 and a stock early-nineties American Standard Telecaster, set to the middle pickup position. We then fed that output into a Mesa Boogie MKIV (Full power, Triode and Simul-Class settings) head and a Boogie 4x12 cabinet with Black Shadow speakers in Moshay’s A-frame live room (plugged into a balanced power source).
Using our ears to pick the best speaker, we then placed each mic directly on axis, about two inches from the grill, just to the left outside the center of the cone. We used a Little Labs IBP to run the signal from Pro Tools to the amp, bringing the +4dB line level signal to guitar level. Each lick was recorded first on the Boogie’s Channel 1 clean setting, then on Channel 3 with some tube saturation. We used a Focusrite ISA 828 on Medium impedance (which we felt imparted the least coloration on the varied mic impedances), running the signal directly into Pro Tools with the preamp’s A/D converters, all clocked with an Apogee Electronics Big Ben. No patch bay was used.
The only adjustments made were to maintain a consistent signal where the peaks hit around -3–4 dB, using a 1kHz tone sent into the amp at approximately -25dB. With all the various types, models and dynamic ranges of the mics, it’s not a perfect science to get exact measurements and levels, but we tried to keep everything as even as possible.
Shure SM57
Certainly a classic, this reliable, rugged dynamic mic has a frequency response of 40Hz–15kHz. Its relatively tight cardioid polar pattern and ability to take high volumes make it a first-call on many sessions. Due to its aggressive mid-range growl, it’s a perfect companion to blend with “darker” mics. When it comes to bang for the buck, the SM57 is hard to beat.
$99 street
shure.com
Royer R-121
The R-121 is a dynamic Ribbon mic with a Figure-8 polar pattern. Like other ribbons, it’s warm, creamy and natural. Unlike most other ribbons, it was built to take a max SPL rating of 135dB, making it a great cabinet mic. Also, by turning it around and reversing the phase, the back is sonically brighter at distances of two feet and closer. We found its face-front sound to be one of our favorites overall for warmth and character—a perfect blend with an SM57.
$1,295 street
royerlabs.com
Neumann U 87 Ai
Another legendary classic, this large diaphragm mic has three polar patterns (cardioid, omni, figure-8). We used an older model in cardioid mode, but the new Ai version has circuitry to increase the headroom by 10dB. With the rear switch attenuated, the U 87 can take up to 127dB and has a frequency response of 20Hz–20kHz. You can hear the “beef” on both clean and distorted parts, and very nice attitude on distorted sound.
$3,650 street
en-de.neumann.com
Shure SM58
Almost always thought of as a vocal mic, sometimes you just have to put one up on a cabinet. Like the SM57, its price, midrange peak, 50Hz–15kHz frequency response and ability to handle massive gain make it a mic drawer classic. Essentially a 57 with a different grill and more girth, it sounded surprisingly good on the clean parts.
$99 street
shure.com
Earthworks QTC1
An omni? Sure, why not! The QTC’s small diaphragm gives it a realistic and accurate sound. A super-wide frequency range of 4Hz–40kHz and max acoustic input of 142dB SPL make it a great option. It had a very natural sound—what you heard in the room is what came out of the speakers.
$1,998 street
earthworksaudio.com
Sennheiser MD 421
A cardioid mic with a five-position bass rolloff (to help eliminate proximity effect), this mic is a classic tone heard for decades now. Its frequency response of 30Hz–17kHz and ability to take very high SPLs give it a full, round sound. It works great with other mics, and by itself sounded warm and full, with slightly rolled off highs.
$399 street
en-us.sennheiser.com
Beyerdynamic M 160
The M 160 is a hypercardioid, dynamic ribbon mic that has two ribbons arranged one above the other a half-millimeter apart. It’s got a max SPL of 129dB and a frequency response of 40Hz–18 kHz. Its big, ribbony sound is always a favorite for good reason.
$699 street
north-america.beyerdynamic.com
Audix i5
The i5 is a dynamic, general-purpose mic with a cardioid polar pattern. It has a frequency response of 50Hz–16kHz and a max SPL of 140dB—so it can take it hard. It sounds like a 57, but with additional presence and upper mid clarity, and would make a great partner with a MD 421 or Royer.
$99 street
audixusa.com
Audio-Technica AT4060
This is a large cardioid, vacuum tube condenser with a large, 2-micron-thick gold diaphragm and separate power supply. It features 20Hz–20kHz specs and can take up to 131dB SPL, which is a lot for a tube mic. While it may not be the best call by itself, it would make a nice mic to put back around 3–4 feet for some additional room sound.
$1,699 street
audio-technica.com
Coles 4038
The 4038 is a studio ribbon mic designed by the BBC for broadcasting and recording. It’s bidirectional (figure-8) with a frequency response of 30Hz–15kHz and can take up to 125dB SPL—although we had to move this back to 11 inches for breakup factor. Another classic ribbon sound with the softened highs and warm overall tone, there’s no denying this one.
$1,438 street
Audio-Technica AT4047/SV
This good-looking condenser mic has a wide frequency response of 20Hz–18kHz and the ability to take up to 159dB SPL with the 10dB pad in. There’s a switchable 80Hz hi-pass filter as well, and it features a gold plated dualdiaphragm capsule design. It captured both crisp highs and a well-rounded bottom.
$699 street
audio-technica.com
AKG C414
Wow, another classic. The 414 has five switchable polar patterns (omni, wide cardioid, cardioid, hyper cardioid, figure-8) and a large, 1-inch diaphragm. It’s got 20Hz–20kHz frequency response and a max SPL of up to 158 with -18dB of attenuation switched in. We set it to cardioid, no pad. This mic cuts through a mix well and has lots of attitude.
$1,155 street
akg.com
Electro-Voice RE20
Often referred to as the “donkey dick” mic, this large diaphragm dynamic cardioid monster routinely seen and heard on radio/TV broadcasts has a frequency response of 45Hz–18kHz. Commonly used in guitar session work, it makes a great complement to other mics, such as the 57. We used a PL15, which is basically the same model. It’s got great low end in both the clean and distorted parts… smooth upper mids and not too much high end.
$449 street
electrovoice.com
Shure SM7B
This dynamic is often viewed as a radio mic, but it has a smooth sound and 50Hz–20kHz frequency response. There are bass roll-off and mid-range emphasis switches, but we set it flat. With an immediately pleasing sound both clean and distorted, it’s got a bottom-heavy focus that works great alone or in conjunction with a brighter mic—great attitude.
$399 street
shure.com
M-Audio Luna
Now available as the Luna II, this cardioid condenser has a large, solid brass capsule, Class-A electronics and a 10dB pad, which lets it handle up to 140dB SPL. It has a good, full low end and smooth mids, especially on the distorted tracks, and is well balanced.
m-audio.com
Heil PR 40
A dynamic supercardioid mic from Heil Sound, it features a large low-mass aluminum diaphragm, a heavy steel case and a wide frequency response from 28Hz–18kHz. Very nice bottom and high end, almost nondescript in a positive way. It sounds really cool with a Coles 4038, or the like.
$299 street
heilsound.com
DPA 4006
Now labeled under the DPA name, this high-end, phantom-powered omni mic is often used in classical recordings. Its got an extremely linear frequency response from 20Hz–20kHz, and can take up to 143dB max SPL. It sounds quite natural, with non-extended highs and lows that give you back just what you put in front of it.
$2,339 street
dpamicrophones.com
Reslo
A classic English ribbon mic from the early sixties, it’s got a frequency response of 40Hz–15kHz… no wonder it can be heard on some of those classic Beatles recordings. The output sounds like analog tape through an old tube console.
[Updated 12/12/21]
With over 350 effects models, 120 sampling slots, and a Groove Station with a 480-second looper, this pedal offers unparalleled versatility for guitarists worldwide.
In 2025, MOOER has announced that it will be set to release its latest multi-effects pedal, the GS1000 Intelligent Amp Profiling Processor, an augmented intelligent amp profiling processor. Built on MOOER’s advanced third-generation digital platform, the GS1000 introduces groundbreaking MNRS 2.0 technology, allowing guitarists around the world to emulate their favorite gear with immense precision–specifically, for distortion pedals, preamps, amplifier heads, and cabinets.
With this innovation, guitarists can fully capture the essence of their favorite guitar gear without owning the physical hardware, enabling them to carry their favorite tones wherever they go. Users are even able to use third-party IRs for cabinets of their choice, further enhancing the flexibility of this feature.
It’s unforgettable how much MOOER’s multi-effects pedals have impressed audiences so far, primarily thanks to their robust tone libraries. However, even still, the GS1000 continues to build upon this with storage for up to 120 sampling profiles, along with continued integration with the MOOER Cloud app. Essentially, this cloud integration facilitates infinite upload and download possibilities, giving users access to a global community of shared tones, widely expanding the number of accessible tones. More still, the GS1000’s previously mentioned third-party IR cabinet simulations support up to 2048 sample points, guaranteeing studio-grade tonal accuracy across the board.
Even more impressive for the price is how the GS1000 inherits the dual-chain effects architecture that made previous MOOER gear so versatile, making it suitable for highly complex usage scenarios. With over 350 factory effects models and a Sub-Patch preset grouping mode, the GS1000 makes it far simpler for users to make seamless transitions between tones, all while maintaining effect tails to guarantee seamless transitions. Additionally, the reintroduction of the innovative AI-driven EQ Master builds upon MOOER devices’ previous capabilities, using intelligent adjustments in real-time to match the musical style of players to tones, while still allowing manual tweaks for precise control.
Impressively, the GS1000 also comes packed with a Groove Station module, consisting of a combination of drum machine and looper features–including 56 high-quality drum kits! It offers a 480-second phrase looper with infinite overdubs, automated detection, and synchronization capabilities, resulting in an intuitive platform for solo jamming, composition, and live loop-based performance. Overall, the Groove Station acts as an all-in-one suite for creating full arrangements, without having to depend on additional backing tracks or bandmates.
Visually and functionally, the GS1000 really stands out thanks to its sleek visual design and enhanced user experience. For example, it features a convenient 5-inch high-resolution touchscreen, which is also paired with ambient lighting to add a visually stunning element to the pedal. As a result, the GS1000 is not only designed for convenient touch-based control but also as a standout centerpiece in any guitar rig.
In addition to this touchscreen control system, the GS1000 also provides expanded connectivity options, improving upon the already impressive flexibility of past pedals. Most notably, it supports connectivity with the MOOER F4 wireless footswitch, as well as the ability to control presets via external MIDI devices.
As is expected from MOOER these days, the GS1000 also excels when it comes to routing opportunities, going above and beyond the typical stereo ¼” inputs and outputs that would be expected from other brands. Yes, it still includes such staples, but it also includes an XLRmicrophone input, alongside balanced TRS outputs for long-distance signal clarity. The configurable serial/parallel stereo effects loop enables seamless integration of external effects, and the addition of Bluetooth audio input and MIDI compatibility broadens its wide range of use cases for live and practice-based applications.
Furthermore, the pedal also serves as a professional audio solution thanks to its low-latency 2-in/2-out ASIO USB sound card. Supporting up to 192kHz sampling rates, the GS1000 makes recording and live streaming effortless, as it can easily be used with software DAWs, MOOER’s editing software, as well as the USB-based MIDI control.
The GS1000 will be available in two versions–the standard white edition, which is powered by mains power, and the GS1000 Li version, which introduces a 7.4V 4750mAh lithium battery, chargeable through its power port. With this upgrade, users can enjoy up to six hours of continuous power-free playtime, making it ideal for practicing, busking, and generally performing on the go.
Overall, for fans of MOOER’s previous amp simulation offerings, the GS1000 represents a natural evolution, building on everything that made its predecessors great while introducing cutting-edge features and expanded capabilities. Most importantly, MOOER has promised to continuously update its MOOER 4.0 tonal algorithms on the MOOER Cloud in line with therelease, keeping things fresh for the company’s dedicated user base.
- MNRS 2.0 sampling technology for emulating distortion pedals, preamps, amplifier heads, and cabinets
- Over 350 original factory effects models
- 120 sampling slots with upload/download support via the MOOER Cloud app
- Supports third-party cabinet IR files up to 2048 sample points
- Integrated Groove Station with a drum machine and 480-second looper, featuring infinite overdubs and synchronization capabilities
- 54 high-quality drum kits
- 4 metronome tones
- Tap-tempo control for timing effects
- Advanced AI-driven EQ Master for intelligent tone adjustment based on music styles, with manual customization options
- Built-in high-precision digital tuner
- Quick-access dual-chain effects architecture for seamless creative workflows
- 5-inch high-resolution touchscreen with ambient lighting for enhanced usability
- Four multi-purpose footswitches
- Configurable serial/parallel TRS stereo effects loop for external effects integration
- 6.35mm instrument input and XLR microphone input for expanded connectivity
- Balanced TRS stereo outputs for long-distance signal transmission without quality loss
- Bluetooth audio input functionality for accompaniment playback
- Low-latency ASIO 2-in/2-out USB sound card supporting up to 192kHz sampling rate
- MIDI controller compatibility for managing presets and features
- USB-C port for preset management, USB audio, and USB MIDI functionality
- Supports MOOER F4 wireless footswitch for extended control
- Also available as the GS1000 Li, which features a built-in 7.4V 4750mAh lithium battery, offering up to 6 hours of continuous playtime, chargeable through the power port
The GS1000 will be available from the official distributors and retailers worldwide on January 16th, 2025.
For more information, please visit mooeraudio.com.
A stereo multi-effects pedal collaboration between Walrus Audio and Yvette Young.
Pronounced “chee ethereal-izer”, the Qi is a new collaboration with Yvette Young that has been over a year in the making. Combining Chorus, Delay, Granular effects, and Reverb, Qi is designed to offer an expansive creative playground for musicians seeking inspiration to create sounds and explore lush, evolving soundscapes.
The Qi Etherealizer allows players to mix and match Chorus, Delay, and Granular effects, running them in either series or parallel configurations to create a vast universe of sonic possibilities. Whether you’re crafting a traditional chorus with a hint of delay or exploring glitchy, ethereal washes of sound, the Qi offers unparalleled flexibility and instant inspiration.The pedal features intuitive controls that let players save up to three onboard presets (127 via MIDI) plus a live mode.
Key features include:
- Space Knob: Adds lush, ambient reverb to the affected signal.
- Tone Knob: A synth-style low-pass filter to shape the overall tone of the effect output.
- Series and Parallel Effects Routing
- Grain Effect: Offers two modes — Grain Cloud for unpredictable glitchy textures and Phrase Sample for rhythmically triggered grain effects.
- Delay: Clean digital delay with up to two seconds of delay time, feedback control, and three subdivision options
- Chorus: Tri Chorus and Stereo Chorus for lush modulation.
- Preset Storage: Three onboard presets (red, green, blue) plus a live mode (white).
- MIDI Control: TRS MIDI 1⁄8” in and thru ports.
- Extended stomp switch controls for Momentary Grain Freeze, Reverb freeze, tap tempo, and Delay oscillation.
Inside, the Qi includes the debut of Walrus Audio’s own proprietary digital processing platform, MDSP, setting a new standard in high-fidelity audio and innovative design. At its core is the powerful ARM-based Cortex M7 processor, enabling sophisticated algorithms in a compact, modular form that adapts to various pedal formats. With a superior audio codec and advanced processing capabilities, MDSP ensures unmatched performance, offering limitless creative possibilities for musicians and audio professionals. The introduction of MDSP reflects Walrus Audio’s commitment to providing creators with cutting-edge tools that inspire innovation and creativity.
The Qi Etherealizer is packaged in a rosy clay-colored enclosure with custom art illustrated by Yvette, or a simplified black and cream variant. The die-cast enclosure’s exact size is 5.83” x 4.87” x 2.30” including hardware.
Walrus Audio is offering The Qi Etherealizer for $449.99 Join us in celebrating the release of the Qi Etherealizer, available now at walrusaudio.com and authorized dealers worldwide.
For more information, please visit walrusaudio.com.
John Bohlinger gets the run-around from Keeley with their new, deep-and-watery chorus and Leslie-like modulator.
Rotary speaker cabinets impart a one-of-a-kind type of chorus effect. This pedal faithfully recreates the swirling textures and vintage warmth of those rotary cabinets. Tucked inside Keeley's laser cut aluminum case is a brand new set of circuit boards delivering the finest tone we've ever achieved.
KEY FEATURES:
- Sculpt your rotary tones with our finest sounds to date
- Updated circuits for maximum fidelity
- Simple and intuitive controls for live and studio use
- New LED speed indicator - Become one with the sound
- True Stereo for perfect integration in modern rigs
- True or Buffered Bypass - Switchable on the fly
Featuring Bluetooth input, XLR inputs, and advanced amplifier platform, the KC12 is designed to offer exceptional sound quality and versatility for a wide range of applications.
The KC12 is a first-of-its-kind, 3-way, 3000-watt active loudspeaker system encompassing the visual aesthetic of a column loudspeaker while surpassing the acoustic performance of conventional designs. Simple and easy to deploy, the elegant KC12, available in black and white, is ideal for a wide range of customers and applications from solo entertainers, musicians and bands, mobile entertainers and DJs to corporate AV, event production, and static installations.
Column-style portable loudspeaker systems are most often put into service due to their unobtrusive form factor. However, typical designs lack clarity and definition, particularly when pushed to high output levels, forcing the user into a form-over-function compromise. Solving this common dilemma, the KC12 cleverly utilizes a 3-way design featuring QSC’s patented LEAF™ waveguide (first introduced in L Class Active Line Array Loudspeakers) combined with a true 1-inch compression driver, two 4-inch midrange drivers, and a high output 12-inch subwoofer, while still maintaining the desired, elegant appearance of a “column” system. The KC12 produces an outstanding full-range horizontal coverage of 145 degrees and 35 degrees of audience-directed vertical coverage with clean and natural sound at all output levels.
The system features three inputs: a Bluetooth ® input combined with a 3.5 mm TRS stereo input, as well as two combo XLR inputs (Mic/Line/Hi-Z and Mic/Line/+48 V), with independent, assignableFactory Presets for each XLR input, making it ideal for small events where two microphones are needed for different uses. The rear panel incorporates a multi-function digital display, offering control and selection of several loudspeaker functions, including Global Parametric EQ, Subwoofer level, Presets and Scenes, Bluetooth configuration, Delay (maximum of 200 ms), or Reverb. Bluetooth functionality also provides True Wireless Stereo (TWS), which ensures low latency pairing between the music source and both left and right loudspeakers simultaneously.
Additionally, the KC12 can be deployed with or without its lower column pole, making the system ideally suited for utilization on a floor, riser or raised stage. The system is backed by a 6-year Extended Warranty (with product registration).
“The KC12 exquisitely resolves the form-over-function compromise that has frustrated users of this category of products since they made their market introduction over 20 years ago,” states David Fuller, VP of Product Development, QSC Audio. “With the benefit of time, experience, extensive customer research, and cutting-edge innovation, our talented design team has truly created something very different from the status quo – not simply a differentiated product, but an overall better solution for the customer.”
The feature set and performance characteristics of the KC12 are complemented by a new, advanced amplifier platform, first incorporated into the L Class LS118 subwoofer released this past October. Fuller adds, “Among the platform’s key attributes are layers of real-time telemetry and protection to ensure uninterrupted performance day after day, which is a foundational QSC brand attribute.”
“Just like our first K Series reset the bar for powered loudspeakers, elevating customers’ expectations for performance, quality, reliability, usability, and professional appearance, the K Column offers a compelling, new approach to a familiar category and is destined to redefine the whole notion of what a ‘column’ is for users of portable PA products,” states Ray van Straten, VPBrand, Marketing & amp; Training, QSC Audio. “The product is simply stunning in its sleek and elegant appearance, but with the marketing tagline, ‘Just Listen’, we’re confident that once again, QSC sound quality will ultimately be the reason customers will quickly embrace the K Column as the next ‘New Standard’ in its category.”
The QSC KC12 K Column carries a MAP price of $1,999.
For more information, please visit qsc.com.