Flash back to an era when 6-string beasts with names like Teisco, Silvertone, Hofner, Wandre, Cipher, and Maier (quietly) roared.
Let me take you back, good people, to a time when The Ed Sullivan Show was featuring rock ’n’ roll bands beamed into homes via brand-new color televisions. This was when the U.S.A. was experiencing a prosperous, post-WWII era filled with ideas of space exploration, jukeboxes packed with vinyl records, and muscle cars cruising the highways. For most in the States, the early 1960s was a great time to grow up and an even better time to want to play electric guitar. It was the era that birthed garage bands. Demand for electric guitars boomed, and guitars were being designed as original models rather than copies of copies. I could write several volumes about guitar design variations, but for this article let’s examine a curious chapter of electric guitar production: the age of fully transistorized Japanese electrics, from 1964 to 1966.
For historical perspective, let’s look at the dawn of solid-state technology. Back in 1947, Bell Laboratories developed an alternative to the costly and problematic vacuum tubes that powered most electronic devices. This transistor technology slowly found its way into consumer products, but was truly embraced in portable radio formats. Before this time many radios were huge and bulky, often positioned as the centerpieces of living rooms. Transistors made it possible to seriously downsize radios so you could carry a pocket-sized one, cranking out the latest Beatles tunes. It may not seem like much of an innovation compared to our palm-sized smart phones, but this new form of technology appealed to the young baby-boom generation. It allowed for more expedient ways to get news and music, all wrapped up in the novelty of transistor radio design. These little radios appeared concurrently with electric guitars in all sorts of pop-culture references on TV, in movies, and in print publications.
Transistor technology was available to many Americans in the 1950s, although the cost of such devices was often expensive. But a few visionary Japanese engineers were visiting the U.S., including Masaru Ibuka, with their eyes on the market. He was the co-founder of Sony, and his fledgling company began making transistorized electronic equipment under license from AT&T. By the early 1960s, Japan had become a major player in transistor radio production, with Sony competing with other Japanese companies such as Toshiba and Sharp. This manufacturing boom was concurrent with the electric-guitar boom and the explosion of popular guitar music. The planets aligned, and soon the technology of both guitars and radios morphed into an interesting combination: the “amp-in-guitar” concept.
Image 1: Attaching a simple, radio-like circuit board platform to a pickup begat the concept of onboard amplification.
One of the earliest examples of these transistor amplifiers appeared on the German-made Hofner “Bat” guitar of 1960—the year it debuted at a European trade show. The Hofner Bat, known as the Fledermaus in the company’s catalog, was produced in very low numbers and is now arguably the rarest of all Hofner electric guitars. It featured a pretty radical angular-but-symmetrical design that incorporated a transistorized amplifier and speaker inside the guitar’s body. Also appearing in the early ’60s were the Italian-made Wandre Bikini Avanti 1, which featured a detachable amp that connected to the lower bout of the guitar, and the Meazzi-branded Transonic, which had a fully integrated amp and speaker in its body.
Image 2: Wandre’s Bikini models sported a detachable amp that connected to the guitar’s lower bout.
Photo by Robert Patrick
Even though these models pre-dated the Japanese models with onboard amps, the Italian guitars were also hard to find in the U.S. and were very expensive. The Wandre Avanti 1 was imported by the Maurice Lipsky Music Company in the early ’60s and priced at an astounding $395.
Image 3: Italian guitars like the Meazzi Transonic arrived on these shores as pricey imports.
But the advertisement for the Avanti 1 read, “No Wires, No Outlet Worries, Plays Anywhere.” Those taglines really reflect the sense of freedom and mobility that transistor technology offered the guitar-playing community. Hey, take your Wandre Bikini to the beach party!
Teisco Silvertone TRG 1 Amp-in-Guitar Vintage Japan
Japanese guitar maker Teisco introduced two transistorized models in 1964: the round-necked TRG-1 and the TRH-1 lap steel. Of course, the true proliferation of the technology was dominated by the Japanese makers of the time, and the Teisco Company led the way when Japan Music Trades magazine featured the newly introduced Teisco TRG-1 in June 1964. Also introduced was a lap steel called the TRH-1.
Image 4: Teisco TRG-1
The “TR” standing for “transistor,” these new models were basically takes on existing guitar designs. The TRG-1 featured a slightly larger Teisco ET-300-style body and one pickup, with the small amplifier mounted under the pickguard where a bridge pickup would otherwise reside.
Image 5: Teisco TRH1
This model had a few different names in its early days, such as TRE-100, TRET-100 (with a tremolo), TRG-1, TRG-1L, and probably a few others. But they were all essentially the same model, offering “new sounds in music.” In 1964 and 1965, Teisco really promoted the amp-in-guitar models in Japan and, here in America, Weiss Musical Instruments was placing advertisements in Music Trades magazine as early as February 1965. Also appearing in 1965 was a Silvertone-branded variation, called the 1487 in Sears literature.
Image 6: Teisco’s ads of the era boasted “new sounds in music” and a decidedly “mod” look.
All of these Teisco-made guitars could be plugged into an amplifier and played like a “normal” guitar, or you could use the internal amplifier powered with 9V batteries that were installed through an access plate on the back of the guitar.
Image 7: Sears’ in-house guitar brand, Silvertone, entered the competition in 1965 with the 1487 model.
All of these Teisco-made guitars could be plugged into an amplifier and played like a “normal” guitar, or you could use the internal amplifier powered with 9V batteries that were installed through an access plate on the back of the guitar.
Image 8: A 3" speaker with 1 watt of power was de rigueur for the self-contained 6-strings of the 1960s.
The batteries fired a tiny transistor amplifier that put out about 1 watt of power through a 3" speaker. You definitely weren’t going to play a house party with this setup, but it was perfect for bedroom jamming and learning songs off the record player.
There were several other Japanese amp-in-guitar models that appeared during 1965, including a super-cool instrument made by the short-lived Shinko Gakki company in the city of Tatsuno. The rarely seen Shinko example was sold in the U.S. through the New York-based Inter-Mark Company, which branded all their guitars as “Cipher” models.
Image 9: This one-pickup Cipher model imported by the Inter-Mark Company originated in Tatsuno, Japan.
The Maier example pictured below was made by another Japanese manufacturer, forgotten by time. After examining the components, this guitar seems to have been produced in the Matsumoto area of Japan. Even the import name of “Maier” is a relative mystery. After pouring through stacks of trade magazines from the era, the only possible clue I’ve found is the R.J. Maier Corp. of Sun Valley, California.
Image 10
They were primarily known as a maker of clarinet and saxophone reeds, but during the guitar boom of the mid-’60s, all sorts of musical instrument companies were importing electric guitars. Either way, the Maier variation follows the familiar blueprint of a single-pickup guitar powering a tiny amp through a 3" speaker.
Image 11
Finally, this two pickup variation, also below, was made at yet another Japanese factory that remains a mystery. I have owned this same model without the internal amp, and the designers simply routed out the regular guitar bodies to accept the transistorized components. But this example features a headphone jack!
The makers of these guitars—a one-pickup model with a Maier-marked headstock and a two-pickup model with a headphone jack—are a mystery today.
There aren’t any records of how many of these amp-in guitars were sold, and I often wonder about the popularity of this format. But by 1966 most all of these guitars had vanished from catalogs, advertisements, and literature. As with many of the Japanese imports, these all-transistor guitars were relegated to closets and pawnshops. Rory Gallagher famously adored his Teisco TRG-1 and recorded with it. But other than that famous connection, the brief history of these guitars has been largely ignored.
Meazzi Supersonic Vintage 60s - Demo
So how do these internal amps sound? Well, they sound like a tiny transistor radio! And for those of you too young for the comparison, imagine a seriously lo-fi sound that’s tinny and raw. Really, these amps were more about portability than sound. Even when direct miked, they sound weak, but—as with all tones—there is a place for this sound in someone’s creative imagination.
Unfortunately, these old amps are almost always in need of repair due to bad capacitors. The values on these capacitors are often odd, but they can be repaired easily enough by almost any good electronics repair tech. I’ve owned eight of these transistorized electric guitars over the years, and all but one needed repair work on the amp circuitry. But when these guitars are fixed up, I love using them. I still take my Teisco TRG-1 to the shore every year. And when my kids were born, you can bet my playing was limited to the 1-watt amps in these guitars as I plucked lullabies in the wee hours of the night. Even today there’s a place for these oddities of ’60s technology and guitar playing!
Frank Meyers is the author of History of Japanese Electric Guitars, published in 2015.
[Updated 3/2/22]
The legendary Elvis sideman was a pioneer of rockabilly guitar, and his approach to merging blues and country influenced generations of guitar pickers. Here’s how he did it.
Chops: Intermediate
Theory: Beginner
Lesson Overview:
• Craft simple blues-based phrases that lie within the CAGED system.
• Understand how double-stops are used in rockabilly music.
• Improve your Travis picking.
Click here to download a printable PDF of this lesson's notation.
In 2016 we lost one of the most influential guitarists and unsung heroes the world has ever known. The driving force behind Elvis Presley’s first recordings, Winfield Scott “Scotty” Moore III helped shape the sound of rock ’n’ roll and inspire generations of fans. Born in 1931, Scotty caught his big break in 1954 when he was called to do a session with Elvis at Sam Phillip’s Sun Studio in Memphis. History was made that day when Elvis recorded “That’s All Right,” and for about four years, Scotty provided 6-string magic for such Elvis hits as “Heartbreak Hotel,” “Hound Dog,” and “Jailhouse Rock.”
A huge Chet Atkins fan, Scotty grew up listening to country and jazz. This blend would have a dramatic impact on his sound, as he would mix Travis picking with some ear-twisting note choices based on chords, rather than using an obvious scalar approach.
I used a thumbpick on the examples in this lesson to sound as authentic as possible. Using a thumbpick on some notes makes them stand out in comparison to those plucked with the remaining fingertips. Ex. 1 is a classic Scotty-type rhythm riff in E that uses some Travis picking. Play the notes on the 6th and 4th strings with your thumb, and use your index and middle fingers for the double-stops on the 3rd and 2nd strings. This is illustrated in the notation: Attack all the up-stemmed notes with your fingers and down-stemmed notes with your thumb.
Click here for Ex. 1
The next example (Ex. 2) reveals one of the more common elements of Scotty’s lead work: double-stops. It makes sense when you consider that Scotty often performed with just a bass player and drummer, so when it came time to play a solo, he needed to create a strong sense of harmony. The first three phrases begin in the “E” shape of the CAGED system before moving down to the “A” shape and returning to the “E” shape. Those last two measures sit squarely in the “E” shape at the 12th position.
Click here for Ex. 2
Ex. 3 returns to Scotty’s Travis-picking influence by outlining an A chord before leading the idea in a new direction with double-stops. The example begins in the “C” shape and resolves in the “E” shape, though this wouldn’t have meant anything to the legendary guitarist. However, his reliance on moving the five basic chord shapes around the neck is undeniable.
In this version of “Hound Dog”—a song originally recorded by Big Mama Thornton—Moore takes a bluesy solo starting at :45.
Click here for Ex. 3
The blues was an essential part of Scotty’s style, and Ex. 4 shows something he might play over the first eight measures of a blues in E. To use the moves in any given key, it’s important to understand how intervals work within a chord. For example, over the E7, I’m approaching the root and 3 (G#) with a half-step slide. With that information, you’re able to transpose this musical shape all over the neck. Approach each double-stop with this method, and you’ll get a lot of mileage out of this rather simple lick.
Click here for Ex. 4
Ex. 5 shows some of Scotty’s single-note ideas, though the phrase still begins with a double-stop on the top two strings to grab the listener’s attention. Measures three and four use a strange collection of notes. Scotty isn’t thinking of a scale here. The phrase begins with a bluesy flourish and a melodic descent to the root. When he gets there, he moves down a half-step to the 7 (an unusual note to play on a dominant chord, but if it sounds good, it is good), and then up again to resolve to the A chord.
Click here for Ex. 5
Scotty was also a big fan of using three-note grips. In Ex. 6, you can see how these ear-grabbing sounds would work over our blues progression. It begins with an E triad in the “D” shape. It’s genuinely amazing how many great chordal licks Scotty could come up with by using just a few chord forms.
Click here for Ex. 6
Ex. 7 is a little trickier, but a great example of how to move from an A chord to an E chord using some double-stops and single notes along with position shifts and sixths. This is very much a country phrase and evidence of the genre’s importance to the rockabilly sound.
Click here for Ex. 7
The final example (Ex. 8) is a longer, 20-measure piece outlining a full progression with Scotty's superb Travis-picking ideas. While this isn’t a column specifically on Travis picking with a collection of exercises to develop that skill, here are a couple of simple tips that should help you navigate this music.
First, focus only on the bass notes. The thumb needs to be automatic. Strive to put no thought into playing the bass part. This takes time but eventually you’ll be free to concentrate on the melody. The last part to absorb is the excellent ending chord. It’s a maj6/9 with the root on top—very common in the rockabilly style.
Click here for Ex. 8
From here it’s easy to hear Scotty’s immense influence on guitardom. It would be well worth your time to go down a rabbit hole of YouTube vids from the CAAS (Chet Atkins Appreciation Society) conference. Nearly every player from that scene owes a debt to Mr. Moore.
Nashville's historic Gruhn Guitars give PG an exclusive look at a very early amp that is a piece of rock history that preceded the heralded JTM45. Amp builder and reverb aficionado Eric Borash of Ebo Sounds shares his expertise on this rare amp's lineage, while John Bohlinger plugs in Dan Auerbach's old '60s ES-335 to test it out.
Metallica's M72 World Tour will be extended into a third year with 21 North American shows spanning April, May, and June 2025.
The M72 World Tour’s 2025 itinerary will continue the hallowed No Repeat Weekend tradition, with each night of the two-show stands featuring entirely different setlists and support lineups. These will include the band’s first Nashville shows in five years on May 1 and 3 at Nissan Stadium, as well as Metallica’s return to Tampa after 15 years on June 6 and 8 at Raymond James Stadium. M72 has also confirmed its much anticipated Bay Area hometown play, to take place June 20 and 22 with the band’s debut performances at Levi's Stadium in Santa Clara.
In a new twist, M72 2025 will feature several single shows bringing the tour’s full production, with its massive in-the-round stage, to venues including two college football stadiums: JMA Wireless Dome in Syracuse, New York on April 19, and Metallica's first ever visit to Blacksburg, Virginia, home of the Virginia Tech Hokies. The May 7 show at Lane Stadium will mark the culmination of 20+ years of “Enter Sandman” playing as the Hokies take the field.
In addition to playing football stadiums across the nation, the M72 World Tour’s 2025 itinerary will also include two festival headlines—the first being the opening night of the run April 12 at Sick New World at the Las Vegas Festival Grounds. May 9 and 11 will then mark a festival/No Repeat Weekend combo as Metallica plays two headline sets at Sonic Temple at Historic Crew Stadium in Columbus, Ohio.
Support on M72’s 2025 North American run will come from Pantera, Limp Bizkit, Suicidal Tendencies and Ice Nine Kills. See below for specifics.
Additionally, M72 2025 will see Metallica’s long-awaited return to Australia and New Zealand.
M72’s 2025 North American leg is produced by Live Nation and presented by new sponsor inKind. inKind rewards diners with special offers and credit back when they use the app to pay at 2,000+ top-rated restaurants nationwide. The company provides innovative financing to participating restaurants in a way that enables new levels of sustainability and success. Metallica fans can learn more at inkind.com.
Citi is the official card of the M72 tour. Citi cardmembers will have access to presale tickets beginning Tuesday, September 24 at 10am local time until Thursday, September 26 at 10pm local time through the Citi Entertainment program.
Verizon will offer an exclusive presale for the M72 tour in the U.S through Verizon Access, just for being a customer. Verizon Access Presale tickets for select shows will begin Tuesday, September 24 at 10am local time until Thursday, September 26 at 10pm local time.
* Citi and Verizon presales will not be available for Sick New World, Sonic Temple or the Toronto dates. Verizon presale will not be available for the Nashville, Blacksburg or Landover shows.
As always, a portion of proceeds from every ticket sold will go to local charities via the band’s All Within My Hands foundation. Established in 2017 as a way to give back to communities that have supported Metallica over the years, All Within My Hands has raised over $15 million – providing $8.2 million in grants to career and technical education programs including the ground-breaking Metallica Scholars Initiative, now in its sixth year, over $3.6 million to combat food insecurity, more than $3.5 million to disaster relief efforts.
For more information, please visit metallica.com.
Metallica M72 North America 2025 Tour Dates
April 12 Las Vegas, NV Sick New World @ Las Vegas Festival Grounds
April 19 Syracuse, NY JMA Wireless Dome *
April 24 Toronto, ON Rogers Centre *
April 26 Toronto, ON Rogers Centre +
May 1 Nashville, TN Nissan Stadium *
May 3 Nashville, TN Nissan Stadium +
May 7 Blacksburg, VA Lane Stadium *
May 9 Columbus, OH Sonic Temple @ Historic Crew Stadium
May 11 Columbus, OH Sonic Temple @ Historic Crew Stadium
May 23 Philadelphia, PA Lincoln Financial Field +
May 25 Philadelphia, PA Lincoln Financial Field *
May 28 Landover, MD Northwest Stadium *
May 31 Charlotte, NC Bank of America Stadium *
June 3 Atlanta, GA Mercedes-Benz Stadium *
June 6 Tampa, FL Raymond James Stadium +
June 8 Tampa, FL Raymond James Stadium *
June 14 Houston, TX NRG Stadium *
June 20 Santa Clara, CA Levi's Stadium +
June 22 Santa Clara, CA Levi's Stadium *
June 27 Denver, CO Empower Field at Mile High +
June 29 Denver, CO Empower Field at Mile High *
* Pantera and Suicidal Tendencies support
+ Limp Bizkit and Ice Nine Kills supp
Beetronics FX Tuna Fuzz pedal offers vintage-style fuzz in a quirky tuna can enclosure.
With a single "Stinker" knob for volume control and adjustable fuzz gain from your guitar's volume knob, this pedal is both unique and versatile.
"The unique tuna can format embodies the creative spirit that has always been the heart of Beetronics, but don’t let the unusual package fool you: the Tuna Fuzz is a serious pedal with great tone. It offers a preset level of vintage-style fuzz in a super simple single-knob format. Its “Stinker” knob controls the amount of volume boost. You can control the amount of fuzz with your guitar’s volume knob, and the Tuna Fuzz cleans up amazingly well when you roll back the volume on your guitar. To top it off, Beetronics has added a cool Tunabee design on the PCB, visible through the plastic back cover."
The Tuna Fuzz draws inspiration from Beetronics founder Filipe's early days of tinkering, when limitedfunds led him to repurpose tuna cans as pedal enclosures. Filipe even shared his ingenuity by teachingclasses in Brazil, showing kids how to build pedals using these unconventional housings. Although Filipe eventually stopped making pedals with tuna cans, the early units were a hit on social media whenever photos were posted.
Tuna Fuzz features include:
- Single knob control – “Stinker” – for controlling output volume
- Preset fuzz gain, adjustable from your guitar’s volume knob
- 9-volt DC operation using standard external power supply – no battery compartment
- True bypass switching
One of the goals of this project was to offer an affordable price so that everyone could own a Beetronicspedal. For that reason, the pedal will be sold exclusively on beetronicsfx.com for a sweet $99.99.
For more information, please visit beetronicsfx.com.