
Inspired by the The Great Guitar Build Off, an experienced builder challenged himself to turn a live-edge piece of cherry wood into a masterfully unique, grizzled beauty.
Kent Meloy
Hometown: Cincinnati, Ohio
Guitar: Live-edge Cherry Swamp Monster, nicknamed āKeith Richardsā
For the past five or six years, Iāve been slowly building my guitar-building chops starting with a couple kits and then moving into my own scratch-built designs under the name Tunguska Guitars. Lately Iāve been intrigued by some of the builds Iāve seen featured on The Great Guitar Build Off run by Britainās Crimson Guitars, and Iāve tried to start thinking outside of the norm.
My brother-in-law has a bunch of 2" slabs of cherry wood that have been drying in a shed behind his house for a couple years. When we were down for a visit, he took me up to collect a few. This particular live-edge piece wormed its way into my heart, and I grabbed it, knowing it was probably useless for a guitar.
But once I got home, I kept thinking about how to solve the problems. The entire bridge/tailpiece area was completely unsuitable, and one thing I knew I did not want to do is fill it with resin. This thing needed to stay as raw, beat-up, and un-shiny as possible. There was barely enough wood to get a body and neck out of it, but I managed to get both.
I decided the only way to solve the bridge issue was to fabricate something myself (if you can call it that), so I picked up a 3/8" steel rod and used a blowtorch to heat it up and make the necessary bends in the bridge, far enough apart that it literally ābridgedā the canyon of disintegrating wood. I put threads on the mounting ends so I could install nuts on the top and bottom as a basic height adjustment. The 2-piece tailpiece was less drastic, but also did the trick by boring deep into the good wood for support.
I decided the pickup mount would emulate an acoustic, boring all the way through the body and countersinking a steel ring for decoration with pickup mounting holes on the backside instead of the top, and I wanted a single volume control to hover in the upper hornās decorative hole. This took a while and involved a short, threaded rod, three nuts, and a little bit of J-B Weld to get one of the nuts on the mini-pot.
Once I got far enough into the process, I was calling it āThe Nameless One,ā but my friends started calling it āKeith RichardsāĀāa grizzled, beat-up, true rock ānā roll survivor. I came to be completely okay with that assessment: It just feels perfect!
The pickup is a hand-distressed StewMac Golden Age Parsons Street humbucker. The fretboard is ziricote and the relicād tuning machines and control knob came from GFS.
The thing sounds amazingāitās very open and organic. Cranking up the distortion just a bit gives it a lovely swamp-ā70s vibe. It completely surpassed my expectations, and Iām sure itās Keithās fault.
Send your guitar story to submissions@premierguitar.com.
- Digging Deeper: The Rolling Stones' 'Sticky Fingers' - Premier Guitar āŗ
- John Fogerty: That Old Travelin' Bone - Premier Guitar āŗ
- What Will Replace Classic Tonewoods? - Premier Guitar āŗ
- Reader Guitar of the Month: Skully - Premier Guitar āŗ
- Reader Guitar of the Month: Woodie from Belfast, Ireland - Premier Guitar āŗ
Danelectro keeps bring the past to the future by recreating cult classics from their history. The masonite masters brought a pair of new electrics, their Sitar in a cracked-black finish, and some new colors on the Longhorn basses.
Tsakalis AudioWorks Phonkify X and Mothership Tube Overdrive + Preamp Demos | NAMM 2025
The latest iteration of Tsakalis' expansive envelope filter is a pure funk machine. All the classic '70s-era sounds are packed in there, but with three separate filters, you can get so much more out of it. Both the octave and filter are switchable, and with effect order switching you can really push the limits of out-of-this-world wah sounds. It will be available in March for $229.
EHX always brings some fresh goodies to NAMM and this year they showed us a trio of tone twisters. The most impressive unit had to be the POG3 that builds off their stupendous previous iterations and put lightning-fast tracking and perfect polyphony over four octaves with smoother tone and performance than ever before. It has six voices including DRY, -2, -1, +5th, +1, & +2, you can mix each with individual sliders and create enveloping stereo effects with dedicated pan knobs and selectable LEFT/RIGHT/DIRECT outputs. The effects section has been expanded to offer envelope control and adjustable Q for the new multi-mode FILTER, enhanced DETUNE section with SPREAD, and individual DRY effect selection, plus the famous ATTACK slider for subtle or dramatic swell effects. It also includes expression effects like Freeze, Glissando, Volume, Filter, X-Fade, and Warp.
Collings brandished a fresh offset solidbody electric. The 71 M is built with an ash body, a slab-sawn hard maple neck, rosewood fretboard (with a 10" radius), Mastery Offset bridge & vibrato, and a set of Lollar JM-Style pickups ā P-90 (bridge) and Blademaster (neck). A 25 1/2" scale length, Kluson Supreme tuners, Davies Radio knobs with push-pull series/parallel on the tone, Jupiter Vintage Yellow capacitors, and narrow-tall frets round out the experience.