The rockin’ riff lords take Fender’s squeaky-clean sound palettes and blast them with dirt on their latest tour.
Hard rockers Baroness were busy writing during the early days of the pandemic, sharing ideas and bits of songs over weekly video calls until they had enough for a new record. Then, after scouting for potential recording locations, they rented an Airbnb in a tiny town in New York and got to work.
The band brought all their gear along with them: They literally loaded up a U-Haul truck and left no pedal behind—a bit unnecessary in retrospect. At the end of their stay, they’d all but finished their sixth studio album, Stone, which was released in September 2023. On their recent summer tour supporting the record, the quartet played Nashville’s Basement East, where PG’s Chris Kies met up with vocalist/guitarist John Baizley, guitarist Gina Gleason, and bassist Nick Jost to get an in-depth look at their current road rigs.
Brought to you by D’Addario.
Franken-backer
Baizley received this custom-built Rickenbacker during the band’s sessions for Stone. It’s got the body and electronics of a Rick 620 but the neck of a 660 model. The Rick and Gleason’s Tele fill in the sonic gaps for each other.
I Think I Smell a Strat
Baizley’s other two primary guitars are these Fender Stratocasters. The first is an American Pro II with a tortoiseshell pickguard and HSS pickup configuration; the second is an original American Pro. The AmPro II lives in heavier tunings and takes a set of .012–.052s, but Baizley prefers both in the fourth position of the 5-way selector switch to build space around Gleason’s leads.
Tele Twins
Gleason rocks two Fender Telecasters, again from both the American Pro I and II series. She actually prefers the first iteration of the V-Mod pickups for their aggression and grit in live contexts, while the V-Mod IIs make for a smoother recording weapon. One stays in D-standard tuning while the other is in C standard with a dropped A#. Gleason strings them with .009–.046s and .010–.046s, respectively, and the whole band loves D’Addario NYXL sets.
So Bass-ic
Bassist Nick Jost is a Fender man, too, with a Precision Bass and American Professional Jazz Bass that both run through his mini-but-mighty rig: A diminutive Gallien-Krueger Legacy series head powers a classic Ampeg 8x10 cabinet. He usually plays with his fingers, but when he loses a game of dice on the road, he’ll sometimes be forced into playing with a pick.
Dual Stereo
Baizley and Gleason both run stereo amp setups. Baizley changes his amp backline often; he used to run twin Roland JC-120s but just recently switched in this Fender ’68 Custom Deluxe Reverb.
Gleason keeps the Fender train rolling with a ’59 Bassman reissue and a ’68 Custom Princeton Reverb.
John Baizley’s Pedalboard
Baizley’s board is packed with staged dirt boxes and tasteful mod stomps, all held in check with a GigRig G2, Peterson StroboStomp, and Ernie Ball Volume Pedal. The crown drive jewels are a heavily modded EHX Big Muff and Crowther Double Hot Cake, but a Beetronix FX Overhive and Pro Co RAT add some sizzle, too. A Boss DD-3, DM-2W, and TR-2, EarthQuaker Devices Dispatch Master and Tentacle, MXR Phase 90 and Dyna Comp, and EHX Deluxe Memory Man handle the rest, while a DigiTech Whammy lurks for its moment to blast off.
Gina Gleason’s Pedalboard
Gleason’s favorite drive these days is the EQD Zoar, their instant-classic 2023 release. Piling on top of that are a MXR Super Badass Distortion, MXR Timmy, modded EHX Big Muff, and a touchy Philly Fuzz Infidel prototype; an Xotic SP Compressor and UAFX 1176 Studio Compressor tighten things up when needed. Three time machines—the Strymon TimeLine, EQD Space Spiral, and Boss DD-3—handle delay, and a Walrus Slo dishes out reverb. The MXR EVH Phase 90 adds some color along with another DigiTech Whammy. The Ernie Ball Volume Pedal, Peterson StroboStomp, and GigRig G2 keep Gleason’s board in line, too.
Nick Jost’s Pedalboard
Jost’s bass board, powered by an MXR Iso-Brick, is a touch more simple, with an Ernie Ball Volume Pedal and Boss TU-3 for utility duties before an Xotic Bass BB Preamp, Boss ODB-3, DOD FX69B Grunge, MXR Stereo Chorus, and Tech 21 SansAmp Bass Driver DI.
Roland Jazz Chorus-120
Fender '68 Custom Deluxe Reverb
Fender Bassman
Fender '68 Custom Princeton Reverb
Fender American Professional Telecaster
Fender American Professional Stratocaster
Fender Precision Bass
Fender American Professional Jazz Bass
Gallien-Krueger Legacy 800 Bass Amp Head
Ampeg 8x10 Cab
Tech 21 SansAmp Bass Drive DI
MXR Iso-Brick
Boss TU-3
Xotic Effects Bass BB Preamp
Boss ODB-3
MXR Stereo Chorus
Modded EHX Big Muff
Boss DD-3
MXR Dyna Comp
Pro Co RAT
MXR Phase 90
Boss TR-2
EHX Deluxe Memory Man
EarthQuaker Devices Dispatch Master
DigiTech Whammy
Walrus Audio SLO
Boss DM-2w
EarthQuaker Devices Tentacle
Peterson StroboStomp
Beetronics Overhive
EarthQuaker Devices Zoar
MXR Timmy
MXR Super Badass Distortion
Xotic SP Compressor
MXR EVH Phase 90
UAFX 1176 Compressor
Ernie Ball Volume Pedal
D'Addario NYXL .110 Strings
Strymon TimeLine
Discover the Best Rig Rundowns of 2023: Top 10 Must-See Gear Showcases
This year PG landed some elsuive white whales (TOOL, Pantera & Jack White), revisited some revamped setups (Jason Isbell, Foo Fighters & Kingfish), and got introduced to some unusual gear (King Gizzard and the Lizard Wizard. Plus, the hosts share their favorite moments from the last 52 episodes before dropping a few coins into the wishing well for 2025 Rundown guests.
12. Green Day Rig Rundown
The legendary punk band are in the middle of an enormous multi-anniversary tour, celebrating both Dookie and American Idiot. Check out how bassist Mike Dirnt and guitarist Jason White tuned their road rigs to cover decades of sounds.
11. Knocked Loose Rig Rundown
Ungodly, sinister, and maliciously menacing guitar tones erupt from the Kentucky hardcore band’s 7-string Ibanez models, providing the soundtrack to the summer’s biggest mosh pits and nastiest breakdowns.
10. Jason Isbell & Sadler Vaden Rig Rundown
With four Grammys, loads of gear, and millions of tour bus miles, Isbell is back for an updated Rig Rundown with his 400 Unit co-guitarist, Sadler Vaden.
9. Extreme's Nuno Bettencourt & Pat Badger Rig Rundown
Guitar legend Nuno Bettencourt crashes his own Rundown to showcase the “Bumblebee” guitar he cooked up to honor Eddie Van Halen, while bassist Pat Badger shares two killer stories about basses that once belonged to members of Van Halen and Aerosmith.
8. Slash's Blues Ball Band Rig Rundown
The rock ’n’ roll icon brings his blues-rockin’ Orgy of The Damned to the people headlining the S.E.R.P.E.N.T. Blues Festival tour.
7. Kingfish Rig Rundown
Kingfish doesn’t play a lot of gear, but with a signature Fender Tele Deluxe, a Chertoff Custom guitar, a pair of road-worthy amps, and a handful of effects, the Clarksdale, Mississippi, native is well on his way to becoming the blues’ newest 6-string ruler. He returns for his second Rundown with a Grammy under his belt, supporting his new Live in London album.
6. Jack White Rig Rundown
Get an up-close look at the tone wizard’s rig for his action-packed 2024 tour.
5. Jerry Cantrell Rig Rundown
The legendary Alice in Chains axeman gives us a look at his updated solo touring setup.
4. King Gizzard and the Lizard Wizard Rig Rundown
Just like their records, the Australian rockers’ road gear is eclectic and adventurous, ready to cover ground from metal to microtonal Turkish psychedelia.
3. Foo Fighters’ Chris Shiflett Rig Rundown
The Foos’ guitarist and intrepid Shred With Shifty host opens the guitar garage for his current tour and details his brand-new pedal setup.
2. Pantera's Rex Brown & Zakk Wylde Rig Rundown
The original Cowboys from Hell bassist reclaims his spine-rattling position as the band's charging piston, while his guitar brother brings his fleet of Wylde Audio gear and a few tone sweeteners from Dimebag Darrell's private stash.
1. Tool's Justin Chancellor Rig Rundown
The bass lord morphs and mutates between rhythm and lead parts with a hearty Wal 4-string, Gallien-Krueger crushers, and a pedalboard that could make Adam Jones jealous.
OM-balance and comfort suited for the fingerstylist on a budget.
Comfortably, agreeably playable. Balanced dimensions. Nice fretwork.
Lighter mahogany top looks less classically mahogany-like. Some compressed sounds in heavy-strumming settings.
$299
Guild OM-320
guildguitars.com
The Premier Guitar crew is spoiled when it comes to hanging out with nice flattops. But while those too-brief encounters with acoustics we can’t afford teach us a lot about the flattop at its most refined, they also underscore a disconnect between the cost and the acoustic guitar’s status as a true folk instrument of the people.
Guild’s OM-320, from the company’s new 300 series, sells for $299, which isn’t much more than a good-quality, entry-level flattop cost in the 1980s. Strikingly, there’s a lot of competition in this price class. Even so, the OM-320’s nice build quality and pretty tone in fingerpicking applications stand out in a very crowded price segment.
The United Guild of Deal-Seeking Pickers
Though Guild, in all its incarnations, has always made accessible guitars a part of their offerings, a $300 instrument with the company’s logo might give pause to players familiar with guitars from their various U.S. factories. Quality can be hit-or-miss on any guitar from any brand at the entry level. What’s more, a lot of guitars with different brand names come from just a few OEM facilities—lending a certain sameness on top of irregular quality. But the recent acquisition of Guild by Yamaha, who has a reputation for solid entry-level instruments, inspires confidence as far as these concerns go.
So, too, does the integrity of the OM-320 at the nuts-and-bolts level. I couldn’t find any overt lapses in quality control. And in many spots where that really counts, like the fretwork, the execution is especially good. Little details like the Guild logo overlay (rather than a simple decal) add a soupçon of luxury. So do the Guild-branded, Grover Sta-Tite-style butterbean tuners, which look stylish and feel sensitive and accurate.
“The neck inhabits a comfortable zone between C and D shapes that’s super agreeable and, at least in my case, a nice antidote for hand fatigue.”
Though the body is built from layered mahogany on the back and sides and a solid mahogany top, the latter is much lighter and amber- or honey-toned than the rich cocoa-hued mahogany tops you’d associate with a vintage Guild M-20, or, for that matter, theM-120 from the company’s contemporary Westerly line. As a result, you see a little more contrast in the grain and a little dimpling in certain sections of the wood. The lighter wood isn’t unattractive, it just looks less trad, if you’re chasing Nick Drake’s Bryter Layter style. If that’s important, you should adjust the “design/build” score appropriately.
Sit and Stay Awhile
Barring being covered in porcupine spines, almost any OM or 000 will qualify as a pure-comfort title finalist. It’s not too thick, too wide, nor too petite—a size and profile that also pays unique, civilized sonic dividends. Here, the OM body is complimented by a neck that feels like an especially natural match. I don’t have a bunch of inexpensive OMs on hand to compare, and there isn’t anything wildly unique about the shape, but the neck profile feels very proportionate to the body. It also, depending on your own sense of such things, inhabits a comfortable zone between C and D shapes that’s super agreeable and, at least in my case, a nice antidote for hand fatigue. The neck is not classically OM-like in terms of nut width. The M-320’s nut measures 1 13/16", which is typical of a 000, rather than the 1 3/4" associated with OMs. The extra width, of course, would make the guitar more appealing to some fingerstylists that need the space. At no point, however, did I feel anything close to cramped; it’s just very comfortable.
The combination of layered back and sides, OM/000 dimensions, and mahogany mean the OM-320 feels and sounds less than super-widescreen in terms of tone spectrum and power. Nevertheless, it sounds balanced and pretty—particularly with a droning, dropped 6th string and other more-elastic tunings where the guitar can exercise the lower extremes of its voice. Tuning to standard has the effect of highlighting midrange emphasis, which can get boxy and render the 3rd and 4th strings a bit less potent and present. That said, it’s still balanced and almost never collapses into a distorted harmonic blur. The bottom end maintains an appealing growl and, as long as you use a gentler picking approach, you can use the highest four strings in very dynamic ways. Using a capo emphasizes other cool, high-mid-focused voices in the guitar that coexist well with most strumming approaches.
The Verdict
Inexpensive guitars that feel great can make up for a lot of shortcomings in tone. But the OM-320’s deficiencies in the latter regard are few, and some perceived limitations, like midrange emphasis, are intrinsic to guitars with OM dimensions. So, while forceful strumming is not the OM-320’s strength, the comfortable playability might just lead you to those places anyway. And if you compensate accordingly with touch dynamics, you can conjure many sweetly chiming tones that might sound extra sweet given the bargain price
Featuring vintage tremolos, modern slicer effects, and stereo auto-panners, the update includes clever Rate and Tempo controls for seamless syncing and morphing.
Today Kemper announces the immediate availability PROFILER OS 12.0 including the highly anticipated collection of advanced Tremolo and Slicer FX for the entire range of KEMPER PROFILER guitar amps.
The Collection features three vintage tremolos, two modern slicer effects, and two stereo auto-panners, that have been derived from the slicer effects. They all feature a clever Rate and Tempo control system, that allows for syncing the tremolo to the song tempo, retriggering the timing by simply hitting the TAP switch, and changing or morphing the tremolo rate to different note values,
The new Advanced Tremolo Modules in Detail
- The Tube Bias Tremolo is the familiar Tremolo in the Kemper Profilers. Formally named "Tremolo“ and available in the PROFILERs since day one, it is a reproduction of the famous Fender Amp tremolos from the 50‘s. Placed in front of the amp it beautifully interacts with the amp distortion.
- The Photocell Tremolo dates back to the 60‘s and features a steeper pulse slope, and its width varies with the intensity.
- The Harmonic Tremolo also dates back to the 60‘s and was introduced by Fender. The low and high frequencies alternate with the tremolo rate.
- The Pulse Slicer is a modern slizer or stutter effect that will continuously transition from the smoothest sine wave to the sharpest square wave, using the "Edge“ parameter. The "Skew“ parameter changes the timing of the high level versus the low level, sometimes also called pulse width or duty cycle.
- The Saw Slicer creates a ramp like a saw wave. The saw wave has a falling ramp when "Edge“ is at full position, and a rising edge at zero position. Towards the middle position a rising and falling ramp are forming a triangle wave. The „Skew“ parameter changes the slope of the rising and falling ramp from a linear trajectory to a more convex or concave shape.
- The Pulse Autopanner and the Saw Autopanner are derivates from their respective Slicers, they spread their signals in the stereo panorama. The "Stereo“-control parameter is included in many effects of the PROFILER. Here, it introduces a novel "super-stereo" effect that lets the Autopanner send the signal well outside the regular stereo image. This effect works best if you are well positioned in the correct stereo triangle of your speakers. When you move the “Stereo” soft knob beyond the +/-100% setting, the super-stereo effect comes into place, reaching its maximum impact at +/-200%.
- A single press on the TAP button at the beginning of the bar will bring the rhythmic modulation effects, such as Tremolo or Slicer, back into sync with the music without changing the tempo. The sync will happen smoothly and almost unnoticeable, which is a unique feature. Of course, tapping the tempo is possible as well.
- Modulation Rate - The “Rate” control available in many modulation effects is based on a special philosophy that allows continuous control over the speed of the modulation and continuous Morphing, even when linked to the current tempo via the To Tempo option. The fine Rate resolution shines when seamlessly morphing from, e.g., 1/8 notes to 1/16 notes or triplets without a glitch and without losing the timing of the music.
PG's demo master quickly (and easily) drops in an H-S-S setup into his 1994 40th Anniversary Stratocaster that needed help. Find out what happens when gets his first taste of active pickups.