The Swedish melodic death metal pioneers continue solidifying their reign as technical titans. That’s due in part to signature guitars—Epiphone Les Paul Customs plus Jackson Diabolics and Soloists that rip and roar—as well as Zon Sonus basses. Altogether, these steely vets with thundering tenacity are feeling the surge of fresh sonic blood.
If In Flames didn’t invent melodic death metal, they cemented the genre’s arrival with Lunar Strain and Subterranean, and if those were early blueprints to the burgeoning style, the Swedes’ The Jester Race and Whoracle were the impeccable benchmarks that made the aggressive artform matter. They’ve continued to push the genre forward with ten subsequent releases—including 2023’s raw, visceral Foregone—further strengthening their core sound that, at its heart, is a modernized blend of intensified Iron Maiden and accelerated Black Sabbath.
Before the band’s headlining show at Nashville’s Marathon Music Works, In Flames’ Björn Gelotte, Chris Broderick, and Liam Wilson welcomed PG’s Perry Bean for a conversation about their powerful setups. Gelotte detailed his workingman’s signature Epiphone Les Paul Custom before his tech Greg Winn showcased a pair of unknown Marshall prototype amps never featured on a Rundown. Shredmeister general Chris Broderick discussed his hands-on approach to designing his signature sound that includes a beveled Jackson Diabolic CB2, modified DiMarzio humbuckers, and a thumbpick he invented. Lastly, Wilson compared the requirements and difficulties between playing bass with Dillinger Escape Plan and In Flames before dissecting his morphing setup that’s trying to feel like home while honoring Peter Iwers’ and Bryce Paul’s thunderous footsteps.
Brought to you by D’AddarioB.I.G.
Björn Ingvar Gelotte used his favorite Gibson Les Paul Custom so much he beat it into submission. It was a special instrument that he wore down to retirement because of fear of ruining it beyond repair. Luckily, around that same time, Gibson called the Swedish shredder wanting to collaborate on a signature model, but being a man of the people, he opted for an Epiphone namesake to keep the price down for fans and aspiring guitarists. It has a mahogany body and neck, an ebony fretboard, a LockTone “Nashville-style” Tune-o-matic bridge, Grover tuners, and a set of high-voltage EMG 81/85 MetalWorks active pickups finished in gold. Both of his guitars take a custom configuration of Dunlop strings (.012-.016-.022-.038-.052-.068) and they either ride in C or A# tunings.
Have a Drink on Me
This is Björn’s second signature Epiphone Les Paul Custom finished in bone white. It has the same DNA as the midnight ebony slugger, but it has gold “top hat” knobs and a stainless-steel bottle opener on its backside.
Mystery Machine
Gelotte has trusted his live tone to tenured tech Greg Winn for many years. Winn has encountered many growlers, but to his ears, nothing purrs like these rare Marshall MD61 heads (top and middle). He notes during the Rundown that they use four EL34 power tubes and four ECC83 preamp tubes. These are not production amps and Winn believes that less than 20 prototypes were built. They use JVM-series parts but have unique sonic architecture in their wiring. The top and middle MD61s are Björn’s clean and dirty amps, and because they’re a scarce commodity, they travel with a third Marshall (JVM205H) for backup purposes.
Can't You Hear Me Rocking?
In Flames has a clean, quiet stage. The MD61s hit an iso cab offstage that houses a single Celestion Vintage 30, which is miked by a couple of sE Electronics Voodoo VR1 passive ribbon mics.
Björn Gelotte's Pedalboard
A Les Paul Custom and Marshall don’t need much help to sound great when playing metal, but to add some spice and space, Gelotte will engage an Ibanez TS9 Tube Screamer or MXR M193 GT-OD Overdrive for extra gain, and a MXR Carbon Copy delay for leads. Any additional effects come from the rackmount TC Electronic G-Major 2. To keep everything tight and crisp, Gelotte hits an ISP Technologies Decimator Pro Rack G. He plugs his guitars into a Shure AD4D wireless system and a couple Lehle boxes—1at3 SGoS and 3at1 SGoS instrument switchers—to organize signal flow and work with a Voodoo Lab Ground Control Pro MIDI foot controller.
Beveled Beauty
Chris Broderick has toured with In Flames since 2019. He officially became a part of their crew in 2022 and made his studio debut with the band on 2023’s Foregone. Onstage he’s been getting the job done on a 4-pack of devilish 7-string instruments. Here’s his Jackson USA Custom Shop Chris Broderick Diabolic CB2 that is made with a mahogany body topped with a flame-maple cap, a quartersawn maple neck-through-body that has graphite reinforcement, an ebony fretboard, a recessed Floyd Rose Pro 7 bridge, D’Addario Auto-Trim tuners, and direct-mounted, custom-voiced DiMarzio humbuckers that are tweaked versions of their D Activator (bridge) and PAF Pro (neck). It’s worth noting the push-pull tone knob, when in the pull position, engages the tone circuit, whereas when pushed down, it bypasses it.
White Walker
This slick ride was the first-ever prototype for Broderick’s Diabolic signature line. He dug it so much that only minor changes were requested: moving the neck deeper into the body pocket for a tighter silhouette and slightly moving the controls out of his way, otherwise the Jackson Custom Shop knocked it out of the park
Flamethrower
After the success of partnering with Jackson on the Diabolic CB2, Broderick wanted to create something more subdued and built off the company’s Soloist platform. The Jackson USA Signature Chris Broderick Soloist 7 includes many of the same ingredients—mahogany body, maple neck, ebony fretboard, Floyd Rose Pro 7 bridge, and custom-voiced DiMarzio humbuckers—from the CB2 but some differences include a coil-split option with a push-pull master volume, a quilted maple top, a set-neck construction, and a kill switch.
Broad Strokes
Proving not only the quality of the Jackson Pro series, but also that a talented painter can use any brush to make art, he also tours with his import Jackson Pro Series Chris Broderick Signature HT7 Soloist that has a mahogany body, maple neck, laurel fretboard, Jackson hardware, and Broderick’s custom-voiced DiMarzio humbuckers. Like the Soloist, it includes the master volume push/pull option for coil-splitting, the tone circuit can be removed (when pushed down), and a kill switch.
Excalibur
Broderick has tried finding the pick for years. He finally found the perfect plectrum … he only had to design and make it himself via a CAD program and 3-D printer. As you can see, it’s a wide, rounded thumb pick that has a short tip for fluidity and precision. And all his guitars take Ernie Ball 7-String Super Slinkys (.009-.052).
Eviscerators
Chris matches Björn’s ferocity with a dual-amp setup, too. His weapon of choice, however, is the 4-channel Engl Savage 100. Each head motors up to 120W and rumbles off a pair of 6550 tubes. He runs a clean-and-dirty setup with the two Engls and has a third Savage as a backup. Unlike Gelotte, Broderick runs his amps into a full 4x12 (ENGL Amplifiers E412VGB 240W cab with Celestion Vintage 30s) that’s out of view on the side of the stage.
Chris Broderick Pedalboard
Keeping things tidy onstage, everything changing Broderick’s tone resides offstage in a rack. Signal from the guitar starts with the Shure AD4D wireless system, an ISP Technologies Decimator Pro Rack G keeps down the noise—with an ISP Technologies Decimator II G-String for extra coverage—and a TC Electronic G-Major 2 and Eventide H9 do the heavy coloring. And a Lehle 3at1 SGoS instrument switcher handles guitar changes.
Tone Zon
Bassist Liam Wilson spent the last 20 years holding down the chaos for Dillinger Escape Plan. He joined In Flames last year and helping him seamlessly make the transition is a pair of longtime 4-string companions. They are Zon Sonus Special 4 models that both have a 35" scale length, ash body with a maple top—black is flame and brown is burl—composite neck and fretboard, and specially-wound Bartolini “multi-coil” active pickups that give the basses amazing clarity and punch. With Dillinger, he used picks, but for In Flames material, he exclusively plays fingerstyle. He goes with a custom set of Ernie Ball strings (.070-.090-.110-.135).
Here's what Liam said on a recent social media post about the instruments: “Absolute masterpieces. I appreciate all the time you spent to keep the dialogue going and deliver EXACTLY what me and the In Flames crew needed. Your commitment to the craft is inspiring. Endless thanks for digging so deep to get these to me in time, at the craziest time of the year, I’ve never felt so in my power as I do playing these instruments…Next level stuff!”Jab! Cross! Uppercut!
Prior to In Flames, Liam has always used a variation of an Ampeg SVT. He replaced Bryce Paul, who was an Orange dude, so Wilson has been trying several combinations of amps and pedals to nail the band’s evolving bass tones from their 14-album lineage. At the Nashville stop, Wilson was putting his Sonuses through these clobber boxes—a Tech 21 SansAmp RBI bass preamp, an Orange 4 Stroke 500, and an Ampeg SVT-4 Pro.
Shop In Flames' Rig
EMG 81 MetalWorks Gold
Jackson USA Signature Chris Broderick Soloist 7
Jackson Pro Series Chris Broderick Signature HT7 Soloist
MXR GT OD
MXR Carbon Copy
Ibanez TS9 Tube Screamer
EMG 85 MetalWorks Gold
Shure AD4D
sE Electronics Voodoo VR1 Passive Ribbon Mic
ISP Technologies Decimator Pro Rack G
Lehle 1at3 SGoS 3 Amp Switcher Pedal
Lehle 3at1 SGoS Instrument Switcher
Voodoo Lab Ground Control Pro MIDI Foot Controller
Ernie Ball 7-String Super Slinkys (.009-.052)
ENGL Amplifiers E412VGB 240W Cab
Eventide H9
ISP Technologies Decimator II G-String
Tech 21 SansAmp RBI Bass Preamp
Ampeg SVT-4PRO 1200-watt Tube Preamp Bass Head
- Mort, Death’s Apprentice: Gothenburg Metal Riffs ›
- Hooked: Trivium's Matt Heafy on In Flames' “Artifacts of the Black Rain" ›
- Reader Guitar of the Month: Fender Made in Japan Telecaster ›
This month’s mod Dan’s uses a 500k linear pot, a 1.5H inductor (L) with a 0.039 µF (39nF) cap (C), and a 220k resistor (R) in parallel.
Don’t let the name fool you, this is a purely passive device—nothing is going to be boosted. In general, you can’t increase anything with passive electronics that isn’t already there. Period. But you can reshape the tone by deemphasizing certain frequencies and making others more prominent (so … “boost” in guitar marketing language). Removing highs makes lows more apparent, and vice versa. In addition, the use of inductors (which create the magnetic field in a guitar circuit) and capacitors will create resonant peaks and valleys (bandpasses and notches), further coloring the overall tone. This type of bandpass filter only allows certain frequencies to pass through, while others are blocked, and it all works at unity gain.
“You can’t increase anything with passive electronics that isn’t already there … but you can reshape the tone by deemphasizing certain frequencies and making others more prominent.”
All the systems I mentioned above are doing more or less the same thing, using different approaches and slightly different component values. They are all meant to be updated tone controls. Our common tone circuit is usually a variable low-pass filter (aka treble-cut filter), which only allows the low frequencies to pass through, while the high frequencies get sent to ground via the tone cap. Most of these systems are LCR networks, which means that there is not only a capacitor (C), like on our standard tone controls, but also an inductor (L) and a resistor (R).
In general, all these systems are meant to control the midrange in order to scoop the mids, creating a mid-cut. This can be a cool sounding option, e.g. on a Strat for that mid-scooped neck and middle tone.
Dan Torres offered his “midrange kit” via an internet shop that is no longer online, same with his business website. The Torres design is a typical LCR network and looks like the illustration at the top of this column.
Dan’s design uses a 500k linear pot, a 1.5H inductor (L) with a 0.039 µF (39nF) cap (C), and a 220k resistor (R) in parallel. Let’s break down the parts piece by piece:
Any 500k linear pot will do the trick, in one of the rare scenarios where a linear pot works better in a passive guitar system than an audio pot.
(C) 0.039µF cap: This is kind of an odd value. Keeping production tolerances of up to 20 percent in mind, any value that is close will do, so you can use any small cap you want for this. I would prefer a small metallized film cap, and any voltage rating will do. If you want to stay as close as possible to the original design, use any 0.039 µF low-tolerance film cap.
(L) 1.5H inductor: The original design uses a Xicon 42TL021 inductor, which is easy to find and fairly priced. This one is also used in the Bill Lawrence Q-Filter design, the Gibson standard Varitone, and many other systems like this. It’s very small, so it will fit in virtually every electronic compartment of a guitar. It has a frequency range of 300 Hz up to 3.4 kHz, with a primary impedance of 4k ohms (that’s the one we want to use) and a secondary impedance of 600 ohms. Snip off the three secondary leads and the center tap of the primary side and use the two remaining outer primary leads; the primary side is marked with a “P.” On the pic, you can see the two leads you need marked in red, all other leads can be snipped off. You can connect the two remaining leads to the pot either way; it doesn’t matter which of them is going to ground when using it this way.
Drawing courtesy of singlecoil.com
(R) 220k: use a small axial metal film resistor (0.25 W), which is easy to find and is the quasi-standard.
Other designs use slightly different part values—the Bill Lawrence Q-filter has a 1.8H L, 0.02 µF C and 8k R, while the old RA Gresco Tone Qube from the ’80s has a 1.5H L, 0.0033 µF C, and a 180k R, so this is a wide field for experimentation to tweak it for your personal tone.
This mid-cut system can be put into any electric guitar not only as a master tone, but also together with a regular tone control or something like the Fender Greasebucket, or it can be assigned only to a certain pickup. It can be a great way to enhance your sonic palette, so give it a try.
That’s it! Next month, we’ll take a deeper look into how to fight feedback on a Telecaster. It’s a common issue, so stay tuned!
Until then ... keep on modding!
Jeff Kollman is a lifelong gigging guitarist whose resume stretches from Deep Purple’s Glenn Hughes to Chad Smith’s Bombastic Meatbats. Since 2017, he’s been performing with famed engineer, producer, and songwriter Alan Parsons, who worked on Abbey Road, Dark Side of the Moon, and a host of other records that you’ve probably owned for decades. It should come as no surprise, then, that as a member of the Alan Parsons Project, Kollman’s gig is to sound great. And he does so with a quick-and-easy rig.
After getting into Nashville’s Ryman Auditorium from a sweaty gig from the night before in Georgia, the band got set up and PG’s John Bohlinger rolled in to catch up with Kollman about his simple road setup.
Brought to you by D’Addario.
Inspiring and Practical
Kollman has a pair of No. 1’s he takes on the road. The first is this all-stock SG Faded Special he picked up used for $560, which he points out is “really resonant” and “really woody,” with great sustain. “It inspires me,” he says, “and it’s inspiring, I think, to kids to know they don’t have to spend five grand on a guitar.”
The SG stays in Kollman’s drop tuning with the low E dropped to C and the A dropped to G. He keeps all his guitars strung with Ernie Ball Super Slinkys (.009–.046).
Surfy Strat
Kollman’s other No. 1 is a ’59 reissue Strat from Wildwood Guitars in Colorado. It features a Brazilian rosewood fretboard and John Cruz custom-wound pickups in the neck and middle. The guitarist isn’t entirely sure what humbucker is in the bridge position, but it’s low output, coil tapped, and he loves it. This Strat stays in standard tuning.
A Lucky Les Paul
Kollman received a tip from pal Greg Koch that this Les Paul, from a limited edition run of featherweight LPs built for Wildwood Guitars, is a “tone beast,” so he jumped on it. At 7.98 pounds, it came as advertised. Kollman loaded it up with an original vintage set of PAFs.
Easy Amp Recipe
Since the Parsons Project does lots of fly dates, Kollman needs a tone recipe for an amp he can find anywhere. He requests a Marshall JCM2000, uses both the clean and dirty channels, and says, “I can flop and go in 5 minutes and have my sound,” while showing off the EVH-style dirt and “ethereal cleans” he can dial-up.
Functional and Fun
Kollman rolls with a pair of pedalboards built by Japan’s Free the Tone. The first is his practical board that is loaded up with an Xotic EP Booster, SP Compressor, and a pair of RC Boosters; some signature gear he co-designed with Tim Jauernig that includes his F-Bomb 3, Kollmanation distortion, and a Zhingh-Whundh (which he says is on the down-low currently);
an Ibanez Tube Screamer TS-808, and a Vemuram Jan Ray dirt box. They’re complemented with a Free the Tone Flight Time Digital Delay and Ambi Space Digital Reverb, and it’s all kept in tune with a TC Electronic PolyTune. Kollman only steps on his Free the Tone Direct Volume and his Free the Tone ARC-3 Audio Routing Controller.
His second board is “just toys” and includes a DigiTech Digidelay, a signature Tim Jauernig Bombastortion, another TS808, a Free the Tone Tri Avatar Multi-Dimensional Chorus, Boss OC-2 Octave, an Octavia clone prototype built by Tim Jauernig, a DigiTech EX-7 Expression Factory, and an MXR Custom Audio Electronics buffer.
