Music—and guitar—are therapeutic. The songs we write and riffs we play help reduce the pain, alleviate the stress, and produce some positivity in our lives. Microwave's singer/guitarist/lyricist Nathan Hardy has been using the studio and stage as his leather couch for nearly 10 years.
Stovall, in 2014, saw him question his Mormon missionary upbringing. Two years later, Much Love focused on realities versus the romance of the rock 'n' roll lifestyle. And 2019's Death Is a Warm Blanket is a dark, heavier, raging deep dive into his nihilistic thoughts. All three albums are honest, coarse evaluations of the pushing and pulling in Hardy's head and heart.
Musically, the band has matured alongside Hardy's contemplative subject matter. Stovall and Much Love harness the teeter-totter dynamics mastered by Nirvana and also felt in Microwave's post-hardcore contemporaries like early Citizen and Turnover.
While their loudest, most aggressive tendencies were unleashed in Death Is a Warm Blanket, Microwave's melodies and hooks can still be sticky and sweet as honey. Finally able to tour in support of that album, Microwave packed Nashville's Mercy Lounge on October 15. Just after soundcheck, Hardy and guitarist Travis Hill introduced PG to their favorite battle axes, walked us through their Odd Couple pedalboards, and Hill explained how an outdated laptop and trial version of Logic Pro provides a universal "poor man's Kemper" for guitars and bass.
[Brought to you by D'Addario XPND Pedalboard: https://www.daddario.com/XPNDRR]
Classic Cruiser
Travis Hill took just one guitar with him during Microwave's fall U.S. tour—his beloved early 2000s Gibson Les Paul Classic 1960 reissue. (A guitar he swears he'll never sell.) The wine red beaut is completely stock including its 496R and 500T humbuckers. It takes Ernie Ball 2215 Nickel Skinny Top/Heavy Bottom strings (.010–.052).
Logic-al Logistics
The band practices in Atlanta using the Overloud plug-in on Pro Tools, and they're accustomed to its amp tones. Nathan wanted to travel with Kempers, but Travis suggested he could run guitars and bass through a free, bundled Slate version of Overloud via a trial version of Logic Pro and an old Focusrite Saffire Pro. Bass has one track, Nathan has two, and Travis has three with two going to FOH and one hitting his onstage cab for monitoring and feedback.
I Gotta Be Heard
While most of Hill's tone gets pumped through the PA and into his in-ear monitors, he still does require stage noise for live monitoring and feedback. He takes out the Orange Rockerverb 50 combo (bypassing its circuitry) and treats it like an extension cab. He prefers the open-back design and hasn't touched the stock Celestion Vintage 30s.
Organized Filth
The majority of Travis' tone comes from here. And at a quick glance you have two takeaways: He loves grimy gain (see the top row) and keeps a tidy workspace. His Ibanez TS9 Tube Screamer is always on. ("It's just a slight push, but you notice it when it's not there.") The other top-row terrorizers are a Fulltone OCD, Fuzzrocious Cat Tail, Way Huge Swollen Pickle, Fuzzrocious Demon King, Walrus Audio Iron Horse, and, off to the side, an EarthQuaker Devices Data Corrupter. Anything that includes repeats, modulation, and clean sounds is supplied by the Boss GT-1000CORE. For maximum control, he has a Boss ES-8 Switching System and Boss EV-30 Dual Expression pedal.
Addendum Effects
Off Travis' main stomp station is an auxiliary board that holds a RapcoHorizon Straightline Passive Direct Box and an Electro-Harmonix 22500 Dual Stereo Looper that keeps some pre-recorded tracks.
Go For the Gold!
Frontman and Microwave cofounder Nathan Hardy unsuspectedly strolled into Atlanta's Earthshaking Music and walked out with this Rivolta Guitars Mondata II HB finished in a marvelous capo gold. The used score still has its original Rivolta "Brevetto" PAF-style humbuckers. Other highlights include a mahogany body—with a raised center block à la a Firebird—and a maple neck paired with a pau ferro fretboard.
Baritone Bruiser
Microwave's 2019 album Death Is a Warm Blanket requires some beefy bari parts, so Hardy found this Fender Blacktop Baritone Telecaster that originally started life in an HSS format. When he bought it, the previous owner had swapped in a set of TV Jones Filter'Trons. To better fit the crisp heaviness Microwave heats the stage with, Hardy had a tech friend drop in a set of EMG 81/85s. Nathan employs Ernie Ball 2220 Power Slinkys (.011–.048).
Nothing Stays Forever
If Travis Hill's pedalboard is Felix Unger, then Hardy's has to be Oscar Madison. Nathan admits in the Rundown that everything on his board has an expiration date. He loves swapping in and out stomps, chasing perfect pedal pairings. The current construct of his tone-tweaking platform harbors some powerfully paranormal boxes—specifically the Gamechanger Audio Plasma (high-voltage distortion pedal) and the Hologram Electronics Dream Sequence (sequencer, envelope shaper, pitch shifter, sampler, and more). The rest of the pedals are fairly standard: Boss BF-3 Flanger, DigiTech Whammy, Ibanez TS Mini Tube Screamer, EarthQuaker Devices Gray Channel, Greer Amps Super Hornet, Boss PH-3 Phase Shifter, Boss DD-500 Digital Delay, Boss GE-7 Equalizer, and TC Electronic Mimiq. The pair of guitars are kept in check by the Boss TU-2 Chromatic Tuner and a Voodoo Lab Pedal Power 2 Plus juices the pedals.
Singing Stomps
Hardy hits his voice with some effects from the Line 6 DL4, Electro-Harmonix Small Clone, and Pro Co RAT.
- Thursday: Melody vs. Discord - Premier Guitar ›
- Rig Rundown: Thrice [2021] - Premier Guitar ›
- Rig Rundown: Citizen [2021] - Premier Guitar ›
- Hologram-Powered Chroma Console Unveiled ›
- Rivolta Sferata Guitar Demo | Dive into Forma Series - Premier Guitar ›
Maxon OD-9 Overdrive Pedal
The Maxon OD-9 Overdrive Effects Pedal may look like your old favorite but that's where the similarity ends. Improved circuitry with a new chip yields the ultra-smooth dynamic overdrive guitarists crave. Drive and Level controls tweak the intensity and volume while the Hi-Boost/Hi-Cut tone controls adjust brightness. Features true bypass switching, a die-cast zinc case, and 3-year warranty. From subtle cries to shattering screams, the Maxon OD-9 delivers a huge range of tones.
Features
Improved circuitry with a new chip yields ultra-smooth dynamic overdrive
Drive and Level controls tweak the intensity and volume
Hi Boost/Hi Cut tone controls adjust brightness
True bypass switching
Die-cast zinc case
AC/DC operation (order optional Maxon AC210N adapter)
Product Specs
Input: 1/4" mono jack
Output: 1/4" mono jack
Power: 9V DC, 6 mA, center pin minus (not included)
Dimensions: (WxDxH) 74 mm x 124 mm x 54 mm
Weight: 580g
Fender’s Greasebucket system is part of Cory Wong’s sonic strategy.
Tone pot with Fender Greasebucket tone system:
This 250k tone pot is a standard CTS pot with a 90/10 audio taper found in all U.S.-built Fender guitars. The Cory Wong guitar uses the Fender Greasebucket system, which is added to the pot as a ready-to-solder PCB. The Greasebucket PCB is also available individually from Fender (part #7713546000), though you can use conventional electronic parts for this.
Fender introduced this feature in 2005 on some of the Highway One models and some assorted Custom Shop Strats. The Greasebucket name (which is a registered Fender trademark, by the way) is my favorite of Fender’s marketing names, but don’t let it fool you: Your tone will get cleaner with this modification, not greasy and dirty.
According to Fender, the Greasebucket tone circuit reduces high frequencies without adding bass as the tone knob is turned down. Don’t let that description confuse you. A standard Strat tone control does not add any bass frequencies! As you already know, with a passive system you can’t add anything that isn’t already there. You can reshape the tone by deemphasizing certain frequencies and making others more prominent. Removing highs makes lows more apparent and vice versa. In addition, the use of inductors (which is how a passive pickup behaves in a guitar circuit) and capacitors can create resonant peaks and valleys (band-passes and notches), further coloring the overall tone.
Cory Wong bringing the funk onstage.
This type of band-pass filter only allows certain frequencies to pass through, while others are blocked. The standard tone circuit in a Strat is called a variable low-pass filter (or a treble-cut filter), which only allows the low frequencies to pass through while the high frequencies get sent to ground via the tone cap.
The Greasebucket’s band-pass filter is a combination of a high-pass and a low-pass filter. This is supposed to cut high frequencies without “adding” bass, which has mostly to do with the resistor in series with the pot. That resistor means the control will never get to zero. You can get a similar effect by simply not turning the Strat’s standard tone control all the way down. (The additional cap on the wiper of the Greasebucket circuit complicates things a bit, though; together with the pickups it forms an RLC circuit, but I really don’t want to get into that here.)
The standard Fender Greasebucket tone system is used in the Cory Wong Strat, which includes a 0.1 μF cap and a 0.022 uF cap, along with a 4.7k-ohm resistor in series. These are the values used on the PCB, and without the PCB it looks like the illustration at the top of this column.
Push-push tone pot with preset overwriting function:
The lower tone pot assigned to the bridge pickup is a 250k audio push-push pot with a DPDT switch. The switch is used to engage a preset sound by overwriting the 5-way pickup-selector switch, no matter what switching position it is in. The preset functionality has a very long tradition in the house of Fender, dating back to the early ’50s, when Leo Fender designed a preset bass sound on position 3 (where the typical neck position is on a modern guitar) of the Broadcaster (and later the Telecaster) circuit. Wong loves the middle-and-neck-in-parallel pickup combination, so that’s the preset sound his push-push tone pot is wired for.
The neck pickup has a dedicated tone control while the middle pickup doesn’t, which is also another interesting feature. This means that when you hit the push-push switch, you will engage the neck and middle pickup together in parallel, no matter what you have dialed in on the 5-way switch. Hit the push-push switch again, and the 5-way switch is back to its normal functionality. Instead of a push-push pot, you can naturally use a push-pull pot or a DPDT toggle switch in combination with a normal 250k audio pot.
Here we go for the wiring. For a much clearer visualization, I used the international symbol for ground wherever possible instead of drawing another black wire, because we already have a ton of crossing wires in this drawing. I also simplified the treble-bleed circuit to keep things clearer; you’ll find the architecture of it with the correct values in the previous column.
Cory Wong Strat wiring
Courtesy of singlecoil.com
Wow, this really is a personalized signature guitar down to the bone, and Wong used his opportunity to create a unique instrument. Often, signature instruments deliver custom colors or very small aesthetic or functional details, so the Cory Wong Stratocaster really stands out.
That’s it! In our next column, we will continue our Stratocaster journey in the 70th year of this guitar by having a look at the famous Rory Gallagher Stratocaster, so stay tuned!
Until then ... keep on modding!
Key Features of the ZOMA
● Intuitive Control Layout: Three large knobs give you full control over Reverb Level, Tremolo Rate,and Depth
● Easy Access to Alternate Controls: Adjust Reverb Decay, Reverb Tone, and Tremolo Volume withsimple alt-controls.
● Instant Effect Order Switching: Customize your signal path. Position tremolos after reverb for avintage, black-panel tone or place harmonic tremolo before reverb for a dirty, swampy sound.
● True Bypass or Buffered Trails: Choose the setting that best suits your rig.
Three Reverb and Tremolo Modes:
● SS – Spring Reverb & Sine Tremolo: Classic spring reverb paired with a sine wave tremolo for that timelessblack-panel amp tone.
● PH – Plate Reverb & Harmonic Tremolo: Smooth, bright plate reverb combined with swampy harmonictremolo.
● PV – Plate Reverb & Pitch Vibrato: Achieve a vocal-like vibrato with ethereal plate reverb.
Reverb: Sounds & Controls
● Spring Reverb: Authentic tube amp spring reverb that captures every detail of vintage sound.
● Plate Reverb: Bright and smooth, recreating the lush tones of vibrating metal plates.
● Reverb Decay: Adjust the decay time using the REVERB/ALT SWITCH while turning the Level knob.
● Reverb Tone: Modify the tone of your reverb using the REVERB/ALT SWITCH while turning the Rate knob.
Tremolo: Sounds & Controls
● Sine Wave/Volume Tremolo: Adjusts the volume of the signal up and down with smooth sine wavemodulation.
● Harmonic Tremolo: Replicates classic tube-amp harmonic tremolo, creating a phaser-like effect withphase-split filtering.
● Pitch Vibrato: Delivers pitch bending effects that let you control how far and how fast notes shift.
● Alt-Control Tremolo Boost Volume: Adjust the boost volume by holding the REVERB/ALT footswitch whileturning the Depth knob.
The ZOMA is built with artfully designed circuitry and housed in a proprietary angled aluminum enclosure, ensuring both simplicity and durability. Like all Keeley pedals, it’s proudly designed and manufactured in the USA.
ZOMA Stereo Reverb and Tremolo
The first sound effects built into amplifiers were tremolo and reverb. Keeley’s legendary reverbs are paired with their sultry, vocal-like tremolos to give you an unreal sonic experience.