Photo 1
Given the popularity of Les Pauls, SGs, Explorers, Flying Vs—and the thousands of other two-pickup axes inspired by these iconic models—it's no surprise I've replaced many failing 3-way switches over the years. Switches get used a lot and eventually they can wear out. When this happens, you'll hear loud popping sounds or scratchy noises, and the signal may even cut out when you're switching pickups.
Fortunately, 3-way toggle switches are easy to replace, and you can do it yourself with just a few tools and a bit of patience. It only takes a few minutes to cover the process, so let's get started.
The project.
To illustrate the steps, I'll use a 1983 Ibanez Les Paul copy that has a standard 3-way pickup selector: neck only, neck-plus-bridge, bridge only (Photo 1). Charmingly, Ibanez kept the arcane "Rhythm" and "Treble" designations for the neck and bridge pickups.
This is a cool guitar and it plays great, but the toggle switch is shot. Like many imported guitars, it has a cheap switch. I'm going to upgrade the guitar with a Switchcraft model, one of several options preferred by discerning players and professionals who are willing to pay a bit extra for reliability. Let's take a closer look.
Types of toggle switches.
On most guitars, you'll find one of two different types of 3-way toggle switches: the box style and the open style. In a box toggle switch, the internal parts are enclosed—typically in plastic—and they can fail if the prongs get overheated, especially when the switch has been re-soldered too many times. As a result, box switches tend to have a short life.
The internal parts are exposed on an open toggle switch, but open switches are usually made from better materials. Switchcraft double-pole 3-way switches boast solid construction and last a long time, which explains why they're used on so many high-quality instruments.
Open toggle switches come in three styles: short straight, tall straight, and right-angle. The short and tall straight switches have their switching apparatus below the toggle, while the switching mechanism on the right-angle switch is perpendicular to the toggle. All three are wired identically, they simply differ in depth and width. For example, guitars with shallow electronics cavities, such as the SG and many thin ES-style hollowbodies, use the right-angle switch. Gibson Les Pauls take the tall switch.
Here's an easy way to tell which type of replacement switch you need: Check out the minimum cavity size for all three Switchcraft styles at stewmac.com, and then compare these dimensions to your guitar's switch cavity.
Removing the old switch.
Using a Phillips screwdriver, remove the cover plate on the back of the guitar to access the switch cavity. If you already have an open switch and you're simply replacing it with a new one, draw a diagram of the old switch or label each wire to help you remember the connections.
Image 1
If you're replacing a budget box switch with an open toggle switch, you can use the simple diagrams I've provided as a guide. Image 1 (above) shows a common 3-way toggle as seen from the front and Image 2 (below) shows the back view.
Unsolder each wire and then remove the switch by turning the mounting nut counter-clockwise. Some toggle switches have a hex nut and require a deep well socket wrench, others have a knurled collar nut that can be loosened or tightened using an adjustable toggle switch wrench.
Tip: Don't use a pair of pliers to remove the nut collar! Pliers will mar the knurled nut and if you slip, you'll also damage the top of your guitar.
Installing the new switch.
Photo 2
On the open switch I'm installing in this Ibanez, there are four prongs at one end and one prong on the opposite side (Photo 2). The four grouped prongs are the switch's inputs and output, and the single prong on the opposite side is the ground. In the group of four prongs, the two outer prongs are the inputs for the pickups and the two in the center are the outputs.
Before soldering, I use hemostats to gently bend the outer prongs (these connect to the pickups) away from the two output prongs between them. Then I crimp the two inner prongs together, because they'll share one wire from the switch's output to the output jack.
Note: Open 3-way toggles may differ physically. On a right-angle switch, for example, the ground prong and the input and output prongs are stacked vertically, and on some straight switches the ground prong is located between the two inputs, while the outputs are on the opposite side. But regardless of the layout, the principle is the same, and once you understand it you'll be able to confidently wire up your guitar. Study the wiring diagram that came with your new switch to confirm how it's configured, or use a multimeter to test and identify the input and output prongs.
Slide the new switch into the switch cavity, thread on the collar or nut, and then tighten it. Be careful when tightening the collar—it only needs to be "finger tight." If you torque it too much, you'll strip the threads. Also be sure to orient the switch so the toggle throw matches the original.
Switches get used a lot and eventually they can wear out. When this happens, you'll hear loud popping sounds or scratchy noises, and the signal may even cut out when you're switching pickups.
Switches get used a lot and eventually they can wear out. When this happens, you'll hear loud popping sounds or scratchy noises, and the signal may even cut out when you're switching pickups.
Solder up.
There are typically four wires to solder: the neck pickup, the bridge pickup, the output (this connects to the output lug on the jack), and the ground. Select a wire and clamp it to its respective prong with the hemostats, then briefly touch the tip of your soldering iron to preheat the prong and wire, and finally touch the solder to the connection just long enough to let a small amount of solder flow over the wire and prong. For detailed soldering tips, see "Tips for Replacing a Strat-style 5-way Switch."
Tip: When soldering, be careful not to heat up the prongs too much. Excessive heat can damage the switch.
Once you've soldered the four wires to their prongs, it's time to check your work. Gently tap the pickups with your hemostats for each position of the switch. You should get neck and bridge alone when the toggle is pointed up or down, respectively, as viewed from the playing position, and both when the toggle is in the center position.
If the neck and bridge toggle positions are working in reverse (i.e., the bridge pickup engages when the switch is up), then reverse the leads on the outer prongs. If the pickups are working correctly, reinstall the cover plate and you're done!
[Updated 11/10/21]
- Guitar Shop 101: Tips for Replacing a Tele-Style 3-Way Switch ... ›
- Mod Garage: How to Wire Alternative Tele 3-Way Switches - Premier ... ›
- Mod Garage: Inside the 3-way Telecaster Pickup Switch - Premier ... ›
![Whores Rig Rundown [2024]](https://www.premierguitar.com/media-library/youtube.jpg?id=55366029&width=600&height=600&quality=85&coordinates=280%2C0%2C280%2C0)
Bluegrass music is bigger than a genre. It’s become an entire world of ideas and feelings in the popular American imagination. And musician Jerry Douglas has been a key part of its celebration and revival over the past 30 years. “It's an old form of music that came from people in the south playing on the porch and became this juggernaut of a genre,” says Douglas. “It’s a character. It's a physical music.”
Douglas has racked up an impressive cabinet of accolades, including Grammys, American Music Association Awards, and International Bluegrass Music Association Awards. He’s been dubbed the CMA Awards’ Musician of the Year three times, and played with everyone from Allison Krauss and Elvis Costello to Bela Fleck and John Fogerty. He’s an encyclopedic guide to contemporary American roots music, and on this episode of Wong Notes, he walks Cory Wong through the most important moments in his 50-year career.
Tune in to hear Douglas’ assessment of bluegrass’ demanding nature (“Honestly, there's not so many genres nowadays that require as much technical facility as something like bluegrass”), what’s required of roots players (“Get it right, get it fast, make it hook”), and why the O Brother, Where Are Thou? soundtrack connected with so many listeners. Wondering how to get involved with session work? Douglas says there’s no one-size-fits-all answer, and what worked for him might not work today. The key is to be dynamic—and know when to keep your mouth shut.
There are plenty of gems in this interview, like Douglas’ thoughts on what makes a good solo, but the most significant might be Douglas’ big takeaway from decades of sitting in on communal roots-music sessions. “We can play in all genres,” says Douglas. “We just have to listen.”
Orangewood Juniper Live Acoustic Guitar
- Equipped with a high-output rail pickup (Alnico 5)
- Vintage-inspired design: trapeze tailpiece, double-bound body, 3-ply pickguard, and a cupcake knob
- Grover open-gear tuners for reliable performanceReinforced non-scalloped X bracing
- Headstock truss rod access, allowing for neck relief and adjustment
- Light gauge flatwound strings for added tonal textures
After decades of 250 road dates a year, Tab Benoit has earned a reputation for high-energy performances at clubs and festivals around the world.
On his new I Hear Thunder, Benoit still proudly plays the Fender Thinline Telecaster he purchased for $400 when he was making his debut album in Texas, 1992’s Nice & Warm. After that heralded release, his eclectic guitar work—which often echoes between classic blues-rock rumble-and-howl, the street-sweetened funk of New Orleans, and Memphis-fueled soul—helped Benoit win a long-term deal with Justice Records. But when the company folded in the late ’90s, his contract and catalog bounced from label to label.
Tab Benoit - "I Hear Thunder"
This bucked against Benoit’s strong desire to fully control his music—one reason he settled on the trio format early in his career. And although his 2011 album, Medicine, won three Blues Music Awards—the genre’s equivalent of Grammys—he stopped recording as a leader because he was bound by the stipulations of a record deal, now over, that he deemed untenable.
“I wanted to make records that reflected exactly how I sounded live and that were done as though we were playing a live concert,” Benoit says. “So, I formed my own label [Whiskey Bayou Records, with partner Reuben Williams] and signed artists whose music was, to me, the real deal, honest and straightforward. I couldn’t do anything on my own, but I could still continue putting out music that had a positive impact on the audience.”
Benoit’s new album, which includes Anders Osborne and George Porter Jr., was recorded in the studio at the guitarist’s home near the bayou in Houma, Louisiana.
Those artists include fellow rootsers Eric McFadden, Damon Fowler, Eric Johanson, Jeff McCarty, and Dash Rip Rock. Benoit also spent plenty of time pursuing his other passion: advocating for issues affecting Louisiana’s wetlands, including those around his native Houma. His 2004 album was titled Wetlands, and shortly after it was issued he founded the Voice of the Wetlands non-profit organization, and later assembled an all-star band that featured New Orleans-music MVPs Cyril Neville, Anders Osborne, George Porter Jr., Big Chief Monk Boudreaux, Johnny Vidacovich, Johnny Sansone, and Waylon Thibodeaux. This ensemble, the Voice of the Wetlands All-Stars, has released multiple CDs and toured.
Essentially, Benoit comes from the bayous, and when it’s time to record, he goes back to them, and to the studio he has in Houma, which he refers to as “the camp.” That’s where I Hear Thunder came to life. “George and Anders came to me and said, ‘Let’s go make some music,” Benoit offers. “So, we went out to the camp. They had some songs—and George and Anders and I go back so many years it was really a treat to put everything together. It only took us a couple of days to do everything we needed to do.”
“George Porter and Anders Osborne and I saw this alligator sitting around the boat where we were writing the entire time. I guess he really liked the song.”
I Hear Thunder has become his first number one on Billboard’s blues chart. Besides the fiery-yet-tight and disciplined guitar work of Benoit and Osborne, the latter also an esteemed songwriter, the album features his longtime rhythm section of bassist Corey Duplechin and drummer Terence Higgins. Bass legend Porter appears on two tracks, “Little Queenie” and “I’m a Write That Down.” Throughout the album, Benoit sings and plays with soul and tremendous energy, plus he handled engineering, mixing, and production.
Once again, that ascribed to his aesthetic. “My main reason for taking on those extra duties was I wanted to make sure that this recording gives the audience kind of a preview of how we’re going to sound live,” he declares. “That’s one of the things that I truly don’t like about a lot of current recordings. I listen to them and then see those guys live and it’s like, ‘Hey, that doesn't sound like what was on the album.’ Play it once or twice and let’s run with it. Don’t overdo it to the point you kill the honesty. All the guys that I love—Lightnin’ Hopkins, Albert King—they played it once, and you better have the tape machine running because they’re only going to give it to you that one time. That’s the spontaneity that you want and need.
“One of the reasons I don’t use a lot of pedals and effects is because I hate gimmicks,” he continues. “ I’m playing for the audience the way that I feel, and my attitude is ‘Let’s plug into the guitar and let it rip. If I make a mistake, so be it. I’m not using Auto-Tune to try and get somebody’s vocal to seem perfect. You think John Lee Hooker cared about Auto-Tune? You’re cheating the audience when you do that stuff.”
Tab Benoit’s Gear
Benoit in 2024 with his trusty 1972 Fender Thinline Telecaster, purchased in 1992 for $400. Note that Benoit is a fingerstyle player.
Photo by Doug Hardesty
Guitar
- 1972 Fender Telecaster Thinline
Amp
- Category 5 Tab Benoit 50-watt combo
Strings
- GHS Boomers (.011–.050)
The I Hear Thunder songs that particularly resonate include the explosive title track, the soulful “Why, Why” and the rollicking “Watching the Gators Roll In,” a song that directly reflected the album’s writing experience and environment. “George and Anders and I saw this alligator sitting around the boat where we were writing the entire time. I guess he really liked the song. He’d be swimming along and responding. That gave it some added punch.” As does Benoit and Osborne’s consistently dynamic guitar work. “I’m not one of these people who want to just run off a string of notes or do a lot of fast playing,” Benoit says. “It has to fit the song, the pace, and most of all, really express what I’m feeling at that particular moment. I think when the audience comes to a show and you play the songs off that album, you’ve got to make it real and make it honest.”
When asked whether he ever tires of touring, Benoit laughs and says, “Absolutely not. At every stop now I see a great mix of people who’ve been with us since the beginning, and then their children or sometimes even their grandchildren. When people come up to you and say how much they enjoy your music, it really does make you feel great. I’ve always seen the live concerts as a way of bringing some joy and happiness to people over a period of time, of helping them forget about whatever problems or issues they might have had coming in, and just to enjoy themselves. At the same time, I get a real thrill and joy from playing for them, and it’s something that I always want the band’s music to do—help bring some happiness and joy to everyone who hears our music.”
YouTube It
Hear Tab Benoit practice the art of slow, soulful, simmering blues on his new I Hear Thunder song “Overdue,” also featuring his well-worn 1972 Telecaster Thinline.