
The high-end, Dumble-style amp supplier to the stars explores and expands upon ’60s Fender tone templates.
Two-Rock’s top-tier amplifiers attract a lot of players who can afford to play through any amp they want. Generally speaking, the company is known for Dumble-style amps. But their newest release, the Vintage Deluxe, takes a different tack—drawing inspiration from the black- and brown- panel Fenders of the 1960s. Cleverly, Two-Rock’s modern design creates a sort of hybrid of old-school Fender moves and contemporary Two-Rock touches, embracing some of the best from both worlds and creating a Fender-influenced amp with a broader palette of sounds.
Masterful Mutation
The Vintage Deluxe comes in a 1x12 combo or as a head that can be paired with Two-Rock’s open-backed 3x10 or single-15 cabinets (or any 4-, 8-, or 16-ohm cabinet of your choice). You can also choose between a 35-watt 2x6L6 version with a tube rectifier or a 40-watt version with four 6V6 tubes and a solid-state rectifier. Our review model is built around the former format and is housed in a sizable (20.5"x12"x10.5") head. Apart from the two 6L6 power tubes, many specs and features will be familiar to Fender fans. It’s built with a steel chassis and comes with footswitchable bias tremolo and a tube-driven spring reverb. Other features are more novel—most notably the two footswitchable tone stacks. The first of these, which is situated on the front panel, features treble, mid, and bass controls. The alternate tone stack is built around a single tone knob on the back panel. Further tone shaping is available via a presence knob and switches for texture, bright, and power modes. A passive effects loop offers an insert point between preamp and power sections for time-based effects.
Signature Sonics
There’s a rich fidelity to the Vintage Deluxe, and an equilibrium in the frequency response that allows the personalities of instruments to shine through. Lows are clear and tight, edgy mids are present but not shrill, and upper harmonics are proportional and exhibit a smooth rolloff. The ability to meticulously shape the output also means the midrange can sit center stage, while the supporting cast fills their layers. That’s not an option on most mid-scooped Fender amps. And while there is some mid scoop evident here, it’s nowhere near as pronounced as it would be on a vintage black-panel amp.
Though the Vintage Deluxe is rated at 35 watts, there’s an abundance of clean headroom and a lack of stiffness or pushback from the power section at high volume levels. There's a near-instant-responsiveness to transients. This open, almost compression-free sensitivity was common across all settings and volumes (the one exception being low-power mode, but more on that later).
Shimmery Sparkle and Crunchy Chords
The Vintage Deluxe gain voicing is straight out of the 1964 Fender playbook—spanning chimey cleans and rich, creamy grind. The amp retains detail and warmth throughout the sweep of the gain pot, and the hint of warm preamp compression that you do hear and feel adds a subdued bloom of sustain. In fact, at some settings the Vintage Deluxe feels like a Fender Deluxe’s preamp mated to a Twin Reverb’s power section. Front-end dynamic response is superb. And setting the amp at the edge of breakup, I could easily vary drive textures via picking dynamics or guitar volume adjustments. This amp is loud, really loud, so I was pleased to find that low volume levels did not compromise its richness of tone. And I didn’t need stage-level volume to feel the body and fullness of the amp.
Silk or Burlap?
The texture switch toggles between two distinctive preamp voicings. The jazzier down position is smooth and warm, characterized by scooped mids and a softer dynamic response. Flipping the switch up unleashes an aggressive tone with snappier transients, enhanced harmonics, and midrange bite—perfect for slicing through a mix. This option is a new Two-Rock feature, unique to the Vintage Deluxe, and expands its range beyond the confines of a typical single-channel configuration.
One … Two … Stacks of Tone
The front-panel treble, mid, and bass filter controls are highly interactive, creating myriad sound sculpting options. The taper of the pots is precise, making fine adjustments easy and satisfying. The range of the pots is also useful from one extreme to another. If you just set everything at noon, the amp sounds full and musical, and you could make merely minimal adjustments from those noon positions and still find a world of cool alternative tones.
The alternate tone stack and its single knob increases gain and adds an aggressive midrange bite that imparts a cranked-up tweed vibe. There’s also a little less low end, which has the effect of sharpening the upper frequencies. It’s not all tweed texture though. You can also find warm and woolly tones, and some with a Vox-y edge. And depending on the setting, the alternate tone stack can serve as a solo boost just as readily as a source of dramatic tone shifts.
Fortissimo vs. Pianissimo
The Vintage Deluxe offers a unique take on the traditional power mode switch. Instead of reducing output level, the power tube bias is adjusted, transforming the response of the 6L6s. High mode utilizes a fixed bias for a glassy uncompressed quality that transparently reproduces nuanced dynamics. Low mode switches to a cathode bias, reducing available headroom, and increasing compression and touch sensitivity. (Interestingly, the hi/low switch serves a very different function in the 6V6 version: cutting output power from 40 watts to 20 watts.)
Retro Effects
The Vintage Deluxe’s onboard effects are very satisfying. The 3-spring, tube-driven reverb tank has classic boingy resonance, but it’s warmer than most vintage Fender reverbs with fewer metallic overtones. It’s also more flexible. The front-panel reverb return adjusts the wet/dry mix, while a back-panel reverb send alters the intensity of the effect, which can range from an ethereal whisper to a saturated wash. The excellent power tube bias tremolo, meanwhile, evokes the woozy sway of a vintage Vibroverb.
The Verdict
The Vintage Deluxe captures the essence of 1960s Fender amps while seamlessly integrating features that extend the boundaries of that template. It’s a beautiful example of artisanal craftsmanship, handcrafted by players for players. Is it worth the nearly $5,849K you’ll pay for the matched head and cabinet? You’ll probably have to spend significant time at your dealer with your favorite guitar to be sure. But that investigation will be an experience that’s well worth the time. You’ll likely be inspired by the tones—even if the amp is beyond your means.
Two-Rock Vintage Deluxe Demo | First Look
- Ask Amp Man: Positively Negative Feedback ›
- Tone Tips: Dialing in Your Gear for Great Sound ›
- Ask Amp Man: Removing Output Tubes to Reduce Power ›
- Two Rock Acquires Divided by Thirteen Amplifiers ›
- When Vintage Guitar Technology Becomes Treasure ›
- Discover the Tone Titans: Two-Rock Silver Sterling Signature - Premier Guitar ›
Fifteen watts that sits in a unique tone space and offers modern signal routing options.
A distinct alternative to the most popular 1x10 combos. Muscular and thick for a 1x10 at many settings. Pairs easily with single-coils and humbuckers. Cool looks.
Tone stack could be more rangeful.
$999
Supro Montauk
supro.com
When you imagine an ideal creative space, what do you see? A loft? A barn? A cabin far from distraction? Reveling in such visions is inspiration and a beautiful escape. Reality for most of us, though, is different. We’re lucky to have a corner in the kitchen or a converted closet to make music in. Still, there’s a romance and sense of possibility in these modest spaces, and the 15-watt, 1x10, all-tubeSupro Montauk is an amplifier well suited to this kind of place. It enlivens cramped corners with its classy, colorful appearance. It’s compact. It’s also potent enough to sound and respond like a bigger amp in a small room.
The Montauk works in tight quarters for reasons other than size, though—with three pre-power-section outputs that can route dry signal, all-wet signal from the amp’s spring reverb, or a mixture of both to a DAW or power amplifier.
Different Stripes and Spacious Places
Vintage Supro amps are modestly lovely things. The China-made Montauk doesn’t adhere toold Supro style motifs in the strictest sense. Its white skunk stripe is more commonly seen on black Supro combos from the late 1950s, while the blue “rhino hide” vinyl evokes Supros from the following decade. But the Montauk’s handsome looks make a cramped corner look a lot less dour. It looks pretty cool on a stage, too, but the Montauk attribute most likely to please performing guitarists is the small size (17.75" x 16.5" x 7.5") and light weight (29 pounds), which, if you tote your guitar in a gig bag and keep your other stuff to a minimum, facilitates magical one-trip load ins.
Keen-eyed Supro-spotters noting the Montauk’s weight and dimensions might spy the similarities to another 1x10 Supro combo,the Amulet. A casual comparison of the two amps might suggest that the Montauk is, more-or-less, an Amulet without tremolo and power scaling. They share the same tube complement, including a relatively uncommon 1x6L6 power section. But while the Montauk lacks the Amulet’s tremolo, the Montauk’s spring reverb features level and dwell controls rather than the Amulet’s single reverb-level knob.
“High reverb levels and low dwell settings evoke a small, reflective room with metallic overtones from the spring sprinkled on top—leaving ghostly ambience in the wake of strong, defined transient tones.”
If you use reverb a lot and in varying levels of intensity, you’ll appreciate the extra flexibility. High reverb levels and low dwell settings evoke a small, reflective room with metallic overtones from the spring sprinkled on top—leaving ghostly ambience in the wake of strong, defined transient tones. There are many shades of this subtle texture to explore, and it’s a great sound and solution for those who find the spring reverbs in Fender amps (which feature no dwell control) an all-or-nothing proposition. For those who like to get deep in the pipeline, though, the dwell offers room to roam. Mixing high level and dwell settings blunts the amp’s touch sensitivity a bit, and at 15 watts you trade headroom for natural compression, compounding the fogginess of these aggressive settings. A Twin Reverb it ain’t. But there is texture aplenty to play with.
A Long, Wide Strand
Admirably, the Montauk speaks in many voices when paired with a guitar alone. The EQ sits most naturally and alive with treble and bass in the noon-to-2-o’clock region, and a slight midrange lean adds welcome punch. Even the amp’s trebliest realms afford you a lot of expressive headroom if you have enough range and sensitivity in your guitar volume and tone pots. Interactions between the gain and master output controls yield scads of different tone color, too. Generally, I preferred high gain settings, which add a firecracker edge to maximum guitar volume settings and preserve touch and pick response at attenuated guitar volume and tone levels.
If working with the Montauk in this fashion feels natural, you’ll need very few pedals. But it’s a good fit for many effects. A Fuzz Face sounded nasty without collapsing into spitty junk, and the Klon-ish Electro-Harmonix Soul Food added muscle and character in its clean-boost guise and at grittier gain levels. There’s plenty of headroom for exploring nuance and complexity in delays and modulations. It also pairs happily with a wide range of guitars and pickups: Every time I thought a Telecaster was a perfect fit, I’d plug in an SG with PAFs and drift away in Mick Taylor/Stones bliss.
The Verdict
Because the gain, master, tone, and reverb controls are fairly interactive, it took me a minute to suss out the Montauk’s best and sweetest tones. But by the time I was through with this review, I found many sweet spots that fill the spaces between Vox and Fender templates. There’s also raunch in abundance when you turn it up. It’s tempting to view the Montauk as a competitor to the Fender Princeton and Vox AC15. At a thousand bucks, it’s $400 dollars less than the Mexico-made Princeton ’68 Custom and $170 more than the AC15, also made in China. In purely tone terms, though, it represents a real alternative to those stalwarts. I’d be more than happy to see one in a backline, provided I wasn’t trying to rise above a Geezer Butler/Bill Ward rhythm section. And with its capacity for routing to other amps and recording consoles in many intriguing configurations, it succeeds in being a genuinely interesting combination of vintage style and sound and home-studio utility—all without adding a single digital or solid-state component to the mix.
Be sure to locate your sample library where it can be quickly referenced on your DAW.
Improve your recordings using your own samples. Bryan Clark, house producer at Nashville’s Blackbird Studio, tells you how to take the final steps in building your own sample library.
Mastering the sample import process in your chosen DAW can significantly enhance your creativity and streamline your workflow. With a clear understanding of the tools and techniques available, you will be better equipped to bring your musical ideas to life and make your productions stand out.
This month, we finish up a three-part series on creating your own sample libraries. In this final installment, I’m going to give you the basic ways to import your samples into various popular DAWs. Each one has its unique workflow and user interface, but the fundamental process remains very similar. This Dojo guide will cover how to import samples into Ableton Live, LUNA, Logic Pro, Pro Tools, and Studio One.
Ableton Live
Steps to Import Samples
Drag and Drop: Simply locate the sample file in your computer’s file explorer, then drag and drop it directly into an audio track in the session or arrangement view.
Browser Window: Use Ableton’s built-in browser (on the left-hand side). Navigate to the sample’s location on your hard drive, then drag it into the workspace.
Create a Simpler or Sampler Instrument: Drag the sample into a MIDI track with Simpler or Sampler loaded. This allows you to trigger the sample using MIDI notes.
Tips: Use the warp feature for time-stretching and syncing samples to your project’s tempo.
Organize your samples into collections using the “Add Folder” option in the browser.
LUNA
Steps to Import Samples
Drag and Drop: Drag the sample from your file explorer directly into the timeline. Then hold the CTRL key down, click on the end of the loop, and drag it to the length it needs to be.
Browser/Workspace: Use the media browser to navigate to your sample’s location on your hard drive. Drag it into an audio track in your session.
Audio Track Import: Right-click on an empty area in the timeline or a track and select “Import Audio” to locate and add your sample.
Tips: Use LUNA’s built-in varispeed capabilities to match your sample to the session’s tempo.Logic Pro
Steps to Import Samples
Drag and Drop: Drag the sample from the Finder directly into an audio track in the workspace.
File Browser: Use the file browser (accessible via the media sidebar or “F” key) to locate and drag samples into the timeline.
Quick Sampler: Drag your sample onto a MIDI track with the Quick Sampler plugin loaded. This lets you play the sample chromatically.
Tips: Use Logic’s flex time feature to sync samples to your project’s tempo. Organize samples into Logic’s library for quick access.Pro Tools
Steps to Import Samples
Import Audio Dialog: Go to File > Import > Audio; then locate your sample and click “Convert” or “Add” to bring it into the session.
Drag and Drop: Drag the sample directly from your file explorer into an audio track.
Workspace Browser: Use the workspace (accessible via Window > New Workspace) to locate your sample. Drag it into your session.
Tips: Use the elastic audio feature for tempo matching and pitch adjustments.
Place your samples into playlists for efficient access during editing.
Studio One
Steps to Import Samples
Drag and Drop: Drag your sample directly from your file explorer into the timeline or browser.
Browser: Open Studio One’s browser (on the right-hand side), navigate to the folder containing your sample, and drag it into your project.
Sampler Track: Drag the sample onto a MIDI track, and use the Sample One sampler for additional manipulation.
Tips: Enable the “Stretch Audio Files to Song Tempo” option in the browser for automatic tempo synchronization. Create sample folders within Studio One’s browser for quick access.General Best Practices
Regardless of the DAW you use, it is important to maintain a smooth and efficient workflow. Organize your sample library with clear folder names and categories to make locating files easy (see last month’s installment for detailed strategies). Where possible, learn DAW-specific shortcuts for importing and editing samples to save time. Always check if your DAW offers a feature to sync the sample’s tempo to your project to ensure seamless integration. Finally, regularly back up your sample collection to avoid losing important audio files and preserve your creative assets! Seriously. Do it now.
Next month, we’re off to “console” land and I’ll be investigating console emulations (hype or not?), summing bus processors, and more to give you a more “studio” sound. Until then, blessings and namaste.
Black Sabbath to Reunite for First Time in 20 Years—Ozzy Osbourne’s Final Performance
The original Sabbath lineup will reunite on July 5 in Birmingham, England, and be joined by Metallica, Pantera, Slayer, and more.
The concert will feature founding members Tony Iommi on guitar, bassist Geezer Butler, drummer Bill Ward, and singer Ozzy Osbourne. Profits from the show, called "Back to the Beginning," will be donated to charities including Cure Parkinson's.
On future Black Sabbath plans, Ozzy's wife, music manager, and TV personality Sharon Osbourne had this to say (via Reuters) about Ozzy: “While other bandmembers might continue to make records and perform, Black Sabbath's gig at the birthplace of the band will certainly be the 76-year-old's final performance.
"For Ozzy right now, it's definitely: 'I love you and good night'," she said.
The shredder and son of legendary artist Frank Zappa gives a tour of his up-to-date gear, including a complex stereo switching system, four racks of pedals, and some of his father’s favorite guitars.
Dweezil Zappa was always going to end up being an incredible guitarist. His dad, Frank Zappa, is celebrated as one of the most talented and creative guitarists in history, and by age 12, Dweezil was recording music produced by Eddie Van Halen. (Little surprise that he’s covering Van Halen’s 1981 stunner “Push Comes to Shove” lately.) He’s been a bona fide guitar star ever since, releasing seven original solo records, six tribute records, two LPs with his brother Ahmet Zappa, and guesting on recordings across the music universe.
Ahead of his gig at Memphis’ Minglewood Hall on his 2024 Rox(postroph)y tour, which celebrated the 50th anniversary of Frank Zappa’s Apostrophe (') and Roxy & Elsewhere records, Dweezil gave PG’s John Bohlinger a boot-to-bonnet look at his current road setup. There’s a lot of ground to cover between his and his father’s catalogues, and Dweezil loves the challenge, which he meets with a mix of his own gear and some special vintage assists courtesy of his dad.
Brought to you by D’Addario.Shut Up ’n Play Yer Les Paul
This coveted Gibson Les Paul Custom, featured on the cover of Frank’s 1981 record Shut Up ’n Play Yer Guitar, came out on the road this tour. Dweezil says that around 1986, his dad swapped in Dan Armstrong-made ceramic pickups. At one point, Frank installed a second input to try to use the guitar as a synth controller, but it didn’t track well enough to continue the experiment.
Along with the standard controls, the guitar includes switches to turn on different parts of the onboard preamp, which boosts the signal and adds plenty of gain. A rotary knob controls a wired-in parametric EQ set up to emulate different settings along the sweep of a wah pedal. Dweezil didn’t get much of the lowdown from his father on the complex operations; it was more trial-and-error. “You just have to turn knobs until you find something that you like,” he says. He connects to his rig with ZZYZX SnapJack magnetic cable connectors.
Rockin' with Roxy
Also out on the Rox(postroph)y tour is Frank’s iconic Roxy & Elsewhere-era Gibson SG. Like the Les Paul, it’s got a preamp circuit to boost the signal, a sweepable EQ, and can achieve acoustic, piezo-adjacent sounds. The preamp configuration in this one is red-hot; it dishes out tons of gain.
Signature Shabat
For Strat-style tones, Dweezil calls on his signature Shabat Lynx DZ, which has been used to dial in his cover of “Push Comes to Shove.” Per Shabat, it has a “body-mounted HSS configuration with a push/pull phase shift on the middle pickup, simplified single-knob layout, custom-cut 3-ply parchment/gold pickguard, and … a Vega-Trem VT1 tremolo."
The Lynx DZ is constructed with an alder body and a quartersawn hard maple, medium-C-profile neck with a 25.5" scale length. It’s loaded with Lollar Special S and Lollar El Rayo pickups, and the middle Special S is wired for phase shift. The Lynx, as well as the SG and Les Paul, are strung with Optima Gold-Plated 2028 FZ Frank Zappa strings (.008–.046), and struck with D’Addario .50 mm celluloid picks. (Dweezil likes them for pick slides.)
On the Ground
Zappa keeps a significant board at his feet, which he controls with a Fractal FC-12 controller. He runs his sound in stereo, with different effects going to each side, so he keeps volume pedals for each side in front of him, plus a wah and expression pedal.
The row of pedals perched atop the pedalboard includes a TC Electronic Polytune 3 Noir, a Marshall-style prototype pedal, J. Rockett Audio Designs PXO, Union Tube and Transistor Lab, SoloDallas Orbiter, a Jext Telez White Pedal (to nab a specific tone for playing “Nanook Rubs It”), and a 29 Pedals FLWR.
In the Rack
On our 2013 Rig Rundown, Dweezil was using the Fractal Axe-Fx II, and this time around, he’s upgraded to the Axe-Fx III as the basis of his sound. Given the sonic territory covered in his shows, it simply became too unwieldy and expensive to tour an analog rig.
The brains of his show are held in a rack system. A couple of out-of-sight splitter boxes help with the complex stereo signal paths, as do a pair of Voodoo Lab HEX audio switchers. The Axe-Fx III lives on the top shelf, and just below it are an Eventide H90 and TC Electronic TC 2290 that go to both sides.
The next rack down runs only to the left side, and includes a BK Butler Tube Driver, DigiTech FreqOut, Red Panda Radius and Raster, Krozz Devices Airborn Analog Flanger, and a Paul Trombetta Design Tornita! fuzz.
The level below it runs to the right side, with a “Clown Vomit” fuzz, Chase Bliss Warped Vinyl, Korg FLG-1 Flanger, Chase Bliss Generation Loss, Goochfx Holy Cow, and another Red Panda Raster.
Wrapping up the rig is the bottom rack, which again runs to both sides. It carries most of Zappa’s exquisite dirt sounds, thanks to a Union Tube and Transistor Tsar Bomba, Chase Bliss Automatone Preamp MKII, Goochfx Dirty Hippie, Tru-Fi Two Face, Foxrox Electronics Paradox TZF2, and a Paul Trombetta Design Rotobone that … somewhat reasonably apes a trombone sound. Paul Trombetta, we salute you.