Join us for a dive into the complicated touring rig of the only artist to win Grammy Awards in 10 different categories.
Jazz guitar god Pat Metheny recently played Nashville’s Ryman Auditorium on his solo tour supporting his latest record, Dream Box. Ahead of the show, PG’s John Bohlinger met with Metheny’s tech Andre Cholmondeley, who pulled back the curtain on what just might be the most complex solo rig ever devised. Afterward, Cholmondeley painstakingly wrote out Metheny’s signal path to help clarify the rig. Buckle up, and keep up if you can.
Brought to you by D'Addario.
Mellow Yellow
A longtime Gibson ES-175 player, Metheny struck up a friendship with Ibanez in the 1970s when he toured Japan. In 1996, they released their first Ibanez PM100 Pat Metheny Signature. This PM100 bears a .080-gauge flatwound string tuned an octave down to a low low E. The rest are Metheny’s normal D’Addario NYXL 10s.
The axe puts out with a lone Charlie Christian single coil pickup plus a microphone inside the guitar running to a separate output. On some occasions, the Christian pumps out more noise or hum depending on the venue's electricity, or even if there’s wifi present. When necessary, Metheny and his team use an EHX Hum Debugger, or an Ebtech Hum Eliminator.
The Axon Axe
This Ibanez PM120—dubbed the "Axon Guitar"—lives on a stand so Metheny can play it with a second guitar on his back as needed as a MIDI controller. It’s got a Roland GK-style pickup with 13-pin output, connected to a 2007 AXON AX 50 synth controller, which drives the Orchestrion percussion instruments via Ableton. Pat can also send MIDI into any soft synth, and create loops inside Ableton, or any attached hardware besides the Orchestrion. (The Ableton 11 software runs on a MacBook Pro and through the show, it’s fed audio from three different guitars.)
Meanwhile, the normal audio output of this guitar hits an IK Multimedia TONEX, then a DI to the house and monitor systems.
Rockin' and Roland
The Roland GR-300 synth and G-303 guitar synth controller have been part of Metheny’s music since the combo was invented in 1980. The GR-300 is built around an analog polyphonic synth with oscillators that must be tuned daily.
The G-303 is strung with D’Addario NYXLs (.010-.046).
Acoustic Arsenal
Each of Metheny’s acoustic guitars has two outputs: one from a standard 1/4" internal bridge pickup, and one from a condenser microphone mounted inside the guitars with a gooseneck or rigid metal arm. Metheny uses a variety of pickups, including Fishman, Go Acoustic Audio, LR Baggs, and the gut mics include offerings from Applied Microphone Technology and DPA Microphones.
All acoustics are treated to unique mix, EQ, and effects and monitored through a pair of Meyer UM-1P and Bose L1 speakers, plus a custom “thumper” in the Yamaha DSM100 mesh drum throne that Metheny sits on during performance.
Crazy 8
Metheny’s 8-string Taylor acoustic takes various tuning. Sometimes, it acts as a baritone with a unison in the middle. Other times, it’s tuned to F-C-D#-E-C#-A#-A#-A. Surprise, surprise: Metheny is always experimenting.
Manzer Monster
In 1984, Metheny asked Canadian luthier Linda Manzer to build an instrument with “as many strings as possible.” The resulting collaboration is the Pikasso 42-String Guitar. While fitted for internal mic as well as a hex pickup, it currently only takes the regular 1/4" output, which is an aggregate of all four neck/zone pickups. Each pickup can be switched in and out with a toggle switch, and there are independent volume pots for each neck, as well as EQ and a master volume. The volume module is powered by two 9V batteries.
Here’s a closer look at the different angles within the Pikasso’s silhouette.
Keeping Up With Kemper
Various guitars run through a Kemper Profiler Power Rack. Each has a unique patch, but most usually use the models of a Fender Twin or a Roland JC-120, complete with verb, delay, and varying gain stages.
Here’s where things get tricky. Metheny runs a silent plug 1/4" cable from his guitars into a Lehle 3 at 1, enabling three stereo inputs—A, B, or C—which can be chosen with silent footswitches or via midi. A is designated for the Ibanez guitars, B takes the Roland setup, and C is home for the Taylor 8-string.
The outputs of all three are sent to a Gamechanger Audio Plus Pedal. (The effects-send out of the Plus feeds a mini Leslie amp set to slow spin.) The Plus’ mono out feeds the “alternative input” of the Kemper. The Kemper sends a number of outs: the XLR heads to a pair of Yamaha DXR-10 speakers; the 1/4" goes to a Radial stereo DI, then on to the house and monitor systems; and the Kemper’s own monitor out feeds an AUDAC EPA152 rackmount power amp. This last route is programmed with a slightly different, “less wet” FX mix than its companions. The AUDAC unit is set to run as two discrete amps, and sends audio to Metheny’s drum throne thumper and a classic Acoustic 4x10 cabinet.
The Dance
For the baritone acoustic which Metheny currently loops in this show, the looper of choice is a Pigtronix Infinity 3 (lower right). It’s fed from the thru/send of the Radial DI for the acoustic. A mono loop send from the Infinity goes to front of house and monitors via a Countryman active DI, and Metheny keeps track of the acoustic loop in his Meyer and Bose monitors. The rest of Metheny’s colors and signal manipulation comes from these tone tools including a Source Audio Soleman MIDI Foot Controller, a pair Blackstar Live Logic 6-button MIDI Footcontrollers, an Electro-Harmonix 95000 Stereo Looper, Gamechanger Audio Plus Pedal, and the aforementioned Roland GR-300.
Accompanying the Maestro
Here’s the percussion mechanisms backing up Metheny during his solo Dream Box tour.
Shop Pat Metheny's Rig
Ibanez PM 200
D’Addario NYXL 10s
EHX Hum Debugger
IK Multimedia TONEX Pedal Amplifier/Cabinet/Pedal Modeler
Squier Classic Vibe Bass VI
LR Baggs M1 Active Acoustic Guitar Soundhole Humbucker Pickup
Bose L1 Pro32 Portable PA System
Guild D-40 Traditional Acoustic Guitar
Kemper Profiler Power Rack
Lehle 3at1 SGoS Instrument Switcher
Gamechanger Audio Plus Pedal Piano-style Sustain Effect Pedal
Electro-Harmonix 95000 Performance Loop Laboratory 6-track Looper
Radial ProD2 2-channel Passive Instrument Direct Box
Pigtronix Infinity 3 Looper Pedal
Source Audio Soleman MIDI Controller Pedal
Blackstar Live Logic 6-button MIDI Footcontroller
- The Tao of Pat Metheny ›
- Make Moves Like Metheny ›
- Mastering Metheny: Uncovering the Signature Techniques of a Jazz Legend ›
- A Zillion Strings!? How To Talk to a Luthier About a Custom Build ›
Along with a demented Jim Root partscaster, the metalcore guitarists ride ESP warhorses into battle on a recent tour with elijah.
Philadelphia-raised metal guitarist Xander Raymond Charles has built himself quite a following on YouTube—his subscribers now number over 120,000. But when he’s not YouTubing, he’s playing live, and earlier this year, he went out on a national tour with metalcore artist elijah. Charles formed half of elijah’s brutal dual guitar section, along with Brandon Kyle. Ahead of a recent Nashville gig, the two shredders sat down with PG’s Chris Kies to share what they packed for the road trip.
Brought to you by D’Addario.
Rooting Around
Charles’ go-to metal machine is this Fender Jim Root partscaster with a 2014 Strat body and 2018 neck. He put in a pair of Root’s signature EMG Daemonum pickups, then pulled out the neck one out of “boredom” while on tour. He’s also replaced a lot of the factory hardware with odds and ends from Lowes or Home Depot. Like most of the duo’s guitars, the partscaster is tuned to drop C, and this one rocks a set of Nashville-made Stringjoy .012–.062 strings.
From the Bench to First String
Kyle’s main ride is this ESP LTD TE-401, which started its life as a backup but has graduated to be Kyle’s No. 1. It’s an affordable model from ESP’s line that Kyle maintains is one of the best-sounding guitars he’s ever played. He loves the playability and feel, which are similar to the Fenders he grew up playing. Obviously, the EMG pickups give it more gas than other T-styles.
Backup Warhorse
This single-humbucker, JM-style ESP LTD XJ-1 HT is another warhorse in Kyle’s stable and serves as a backup during elijah’s current set. It’s equipped with D’Addario XL .012–.056s.
Low and Long
This stunning Squier Vintage Modified Baritone Jazzmaster can handle all of Charles’ low-end demands with its 30" scale length.
Fresh from the Lab
Charles was gifted this 7-string Cerberus prototype, which is geared up with locking tuners, a single Guitarmory Pickups humbucker, and a 30" scale length.
Quad Power
Both Charles and Kyle are running Neural DSP Quad Cortexes, and after some testing, both decided to roll with a profile of an EVH 5150 loaded with EL34s. For clean sounds in the set, they lean on a Friedman profile. Sennheiser wireless systems let both guitarists cut loose onstage.
Shop Elijah's Rig
D'Addario XL Strings
EMG JR Daemonum Pickups
Stringjoy Strings
ESP LTD XJ-1 HT
Fishman Fluence Pickup
Neural DSP Quad Cortex
The Warg is a modern revamp of the Ace Tone “Fuzz Master” FM-3, designed to offer uniquely aggressive high-gain options.
"Despite its feral exterior, the Warg is refined under the hood, with several quality-of-life improvements, like silent soft true-bypass switching, top-mounted jacks, high-end German-made hardware and premium internal components."
Features:
- EQ profile switch toggling between the scooped wall of fuzz tones of the original circuit, and a flat profile with a fuller and punchier midrange
- Versatile tone control and broad gain range allows for anything from chunky riffage to searing leads
- Silent soft touch switching system via an internal relay
- Art by the talented Jordan from Pine-Box Customs
Like all Evil Eye FX pedals, the Warg features a lifetime warranty and is hand-built one-at-a-time in Philadelphia, PA.
Street price of $149.
Available now at www.evileyefx.com, or through any of our fine retailers.
Evil Eye FX is a joint venture from childhood friends and bandmates Sean and Ben, building their brand around their love of DnD and other tabletop RPGs, video games and fantasy. In 2019, the pair began modding BOSS pedals to meet the needs of their band, and quickly fell in love with the craft. In 2023, they founded Evil Eye FX with the vision of providing unique handmade pedals at working musician-accessible prices.
Check out Jackson Brooksby’s look at the history of the FM-3 and demo of the Warg.
Our columnist makes an argument against the usefulness of tap tempo footswitches. Should we really be bothering with them?
The ability to tap in a tempo on pedals is a fairly new concept, especially compared to the amount of time that stompboxes have existed in our world. I would venture to guess that this is due in part to the availability of, and need for, digital ICs. Then, being able to code them and apply them to effects circuits appropriately.
Piece of cake! … If you’re good at baking cake. This process isn’t exactly easy to implement, but these days, I feel like some players are almost expecting this modern commodity—to the point where a great delay pedal might be overlooked due to not having tap tempo.
Setting aside the history and design applications, I’ve been pondering if tap tempo even makes sense or is achievable in a band context. For this thought experiment, I’d like to run through a few scenarios, while also shedding light on a few software/hardware aspects for you to consider. To put it plainly, “Why would you need tap tempo on a pedal?” The most compelling argument I’ve thought of is the “band” aspect: being part of a band where the rhythm section has laid down the tempo and you’d like to add delay to the song. Now, if you set the knobs on your delay pedal and started playing to that tempo, your bandmates could join along with your delay line acting as the group’s metronome. However, in this scenario, you didn’t start the tempo. That’s no problem! You’ve got a footswitch on your delay that allows you to tap your foot to the beat of the drummer and you’ll be all set! But will you?
Let’s assume, for argument’s sake, that the drummer is playing to a click track at 120 bpm. Your foot starts tapping along and you press that magical tap footswitch on your favorite delay three to six times. Boom! Now you’ve set the delay line to 120 bpm. But what are the chances that you tapped 120 exactly? Is it likely that you tapped in 122 bpm? Or 121.3 bpm? Absolutely. This discrepancy may not be very noticeable for a couple bars, but every subsequent bar you play will start to become more noticeable. So what do you do? You can keep tapping in the tempo to the best of your ability every few bars. Seems cumbersome given that you still have to play the guitar parts and focus on other things that are inherently involved in a band setting.
Pulling the curtain back for a second here, let’s call the part of the pedal that handles the tap tempo “the brain.” The brain of the delay sees you pressing the tap footswitch multiple times and processes this in a couple ways (that I’m aware of). One, it measures the distance between all the consecutive taps and spits out an average. Two, it takes the last two distances in the string of taps and makes that the bpm. That’s not even going into whether the brain is floating point (121.3 bpm) or fixed point (121.32 bpm).
“You’ve got a footswitch on your delay that allows you to tap your foot to the beat of the drummer and you’ll be all set! But will you?”
Your drummer is still waiting for you to get the tempo dialed in. So what can you try next? Well, if your delay pedal has an insert jack for tap tempo, we can try to connect something like the Disaster Area SMARTClock. The tap footswitch on it won’t help here. It’ll be the same as the bpm discrepancy we discussed previously. However, there’s an encoder knob that allows you to scroll through the output tempo in bpm or millisecond increments. Yes! Not all is lost! You just have to make sure to sync it up exactly on the downbeat of the tempo—crap!
Another more intricate and exact option would be to have the drummer’s click track send a MIDI signal to your SMARTClock that then connects to your delay. At this point, I’d change my question to, “Is this level of tap tempo necessary?” Perhaps if you’re the Edge and/or the song is predicated on the delay.
If you’re adding a lead part to a song and the delay isn’t exactly “on” with the bpm, I would argue that it can stand out better, be more easily heard, and be more interesting. I would also argue that an amplitude-style tremolo makes more sense to require exact bpm. I’m thinking about the Smiths’ “How Soon is Now?”
Tap-tempo options on modulation have been fun and we’re seeing more of it nowadays, but we’ve been playing and listening to the Phase 90 for decades without needing tap. Ultimately, if having certain options inspires you and brings you joy, go for it! Enjoy! But I’d ask you, “Did you actually tap in the correct bpm?” and “Did it matter?”Orianthi joins forces with Orange Amplification for her signature combo, the Oriverb, based on the classic Rockerverb MKIII 50 NEO Combo.
"Seeing this whole amp come to life has been a dream come true," said Orianthi, "it’s a beautiful amp and it really reflects my eccentric personality!"
The platinum-selling virtuoso guitarist has gained a reputation as a multi-faceted artist, singer, songwriter and first-call collaborator. With roots planted firmly in hard rock, her latest single "First Time Blues" featuring Joe Bonamassa and "Ghost" are a combination of blues-based riffs and memorable melodies. She is currently on tour in the USA and working on a new album to be announced soon.
The Oriverb, inspired by the Rockerverb 50 MKIII Combo Neo, is voiced to embody Orianthi’s unique sound. It has a cleaner mid-range warmth that reflects her classic blues and rock tone, whilst retaining all of its desired variable distortion.. A tweaked EQ gives the Oriverb creamy, sparkly cleans and saturated screaming overdrives.
Fitted with a pair of lightweight, British-made Celestion Neo Creamback speakers and EL34 valves, the Oriverb has that definitive British flavour with incredibly versatile tone shaping abilities. The new combo also boasts a much-loved footswitchable spring reverb, built-in attenuator for maxed out textures at neighbour-friendly volumes, switchable power options and a near-transparent, valve-driven effects loop. The cabinet is crafted using the highest quality 15mm Baltic birch plywood, making it one of the lightest 2 x 12” speaker cabinets on the market and is finished in an embossed white Tolex, selected by Orianthi.
"We created this to be something very special, unique, something that when people plug into it, whatever guitar they are gonna use through this, it is going to amplify their personality," explained Orianthi, "being able to bring something to life that I feel a lot of people are really going to enjoy has been a real honour. I am so proud of this amp and I can’t wait for people to check it out."
To find out more about the new Oriverb, plus all the other Orange Amplification
products, please go to orangeamps.com.