
The anatomy of a Tele neck pickup. Photo courtesy of LeoSounds Pickups (leosounds.de)
Let’s face it: Few Tele players actually like the sound of the stock neck pickup. If you’re thinking of swapping it for something else, here are some time-tested options.
Now that we've explored Telecaster bridge pickups, we've arrived at the final stage of our journey: the neck pickup. Smaller than a Stratocaster pickup, the stock Tele neck pickup sports a closed metal cover and is usually installed with two wood screws that tap right into the body underneath the pickguard.
Few players really love the Tele neck pickup. Why is this? I think it has to do with the remarkable sonic differences between the Tele's two pickups. The bridge pickup has a crystal-clear, loud, and twangy tone, while the neck pickup delivers less volume and has a kind of husky, colorless sound. When you switch from the bridge directly to the neck pickup, it sometimes feels as if something's wrong. Most players (myself included) don't like its sound and simply don't use it. But it's a shame to only use one pickup in a guitar that offers two!
Most of the muffled sound is caused by the metal cover, especially when it's not made of German silver (an alloy consisting of copper, nickel, and zinc), so it's always a good idea to remove the cover to enhance the pickup's tone. After removing the metal cover, if the coil wire is exposed you can protect it by wrapping it in some pickup tape. The cover is there to provide shielding, and if you don't want to lose this benefit, install an "open-frame" replacement metal cover. Essentially, this is a ring that protects the pickup, but leaves the top open. This helps the pickup's tone a lot, yet maintains most of the shielding.
If this doesn't do the trick for you, it's time to think about a replacement pickup. But remember, unless it's a drop-in Tele design, installing a replacement neck pickup requires enlarging the pickup cavity and either buying a new pickguard or reworking your current one. You'll also need to decide whether you want to stick with the traditional mounting method (screws surrounded by latex tubing going directly into the wood) or use a Strat-style method of drilling two holes through the pickguard. That said, there are some superb alternatives to the stock Tele neck pickup.
Stratocaster.
We all know the magic tone of a Stratocaster neck pickup. It's the perfect mate to a Telecaster bridge pickup, and even some Fender signature models like the Jerry Donahue and Clarence White Telecasters leave the factory with one. The benefits? You get a true Strat tone soloing the neck pickup, and it also sounds great combined with the Tele bridge pickup because the Strat pickup contributes warmth.
When you switch from the bridge directly to the neck pickup, it sometimes feels as if something's wrong.
P-90.
One of my personal choices is a P-90 soapbar pickup, but you can also use a P-94 in standard humbucker size. A P-90 looks great on a Telecaster, and its fat single-coil tone is very versatile. An outstanding combination is an Esquire/Nocaster/Broadcaster-style bridge pickup plus a P-90 at the neck. Both sounds fit together perfectly, and when you use 4-way switching wiring with both pickups in series rather than parallel, you can make every tube amp sing.
Mini-humbucker/Firebird.
This is another great choice with a tone that's similar to a P-90, but a tad fatter and warmer—and naturally free of hum and noise because these are real humbuckers! The enclosed Firebird pickup offers a bit more high end compared to the mini-humbucker with its open pole-piece row. Nashville session giant Brent Mason orients his neck-position mini-humbucker so the open pole-piece row faces the bridge. Compared to the standard installation, this gives the pickup a little more treble bite. Sonically, this pickup type falls between a P-90 single-coil and a full PAF-style humbucker.
PAF-style humbucker.
Ah—the classic Keith Richards configuration. A full-sized humbucker delivers a Les Paul-inspired neck pickup tone, but because of the Telecaster's longer scale length, you get a stronger attack and more note definition. Surprisingly, the sound of a vintage-flavored PAF humbucker works well with a Tele bridge pickup, and playing them together wired in parallel results in a well-balanced tone in the P-90 ballpark.
Lipstick.
With its glassy, twangy tone, the lipstick pickup is a perfect choice for funk, ska, surf, or reggae players. I recommend pairing it with a warmer-sounding bridge pickup—a Nocaster-type or something in the overwound/Texas Special ballpark. A lipstick is also ideal if you want to imitate flattop strumming on your Tele: Roll back the volume to about 60 or 70 percent and make sure you're not using a treble-bleed network on the volume pot. Configured this way, a lipstick neck pickup sounds quite "acoustic."
Charlie Christian.
This design sounds marvelous on a Tele in the neck position, and not only for jazz, swing, and bebop. In addition to the original Gibson version with its metal frame, some companies offer CC pickups in a standard humbucker shape, so putting one in your Tele is much easier than it was years ago. This pickup sounds fat and mellow, but always defined with clear top end and tons of sustain.
DeArmond/Filter'Tron.
A great choice for classic rock 'n' roll, surf, and of course, rockabilly. Bright, warm, and twangy, the Gretsch-inspired pickup is a perfect mate for all Nocaster-style bridge pickups. Many rockabilly players prefer a Bigsby-equipped Tele with this pickup combination instead of a feedback-prone semi-hollow guitar. It's a fine way to get old-school tone.
Next time we'll put our Teles out of phase, and I'll share a funny historic story on this topic. Until then, keep on modding!
[Updated 7/27/21]
- How to Balance Pickups on Strats and Teles - Premier Guitar ›
- Mod Garage: Adding an Out-of-Phase Switch to a Telecaster ... ›
- Mod Garage: The Strat-o-Tele Crossover - Premier Guitar ›
- Humbucker-Sized P-90 Review Roundup - Premier Guitar ›
- Humbucker-Sized P-90 Review Roundup - Premier Guitar ›
- What’s the Difference Between Humbucker and Single-Coil Guitar Pickups - Premier Guitar ›
- Mod Garage: Ritchie Blackmore Stratocaster Mods - Premier Guitar ›
- 10 of the Best Telecaster Pickups - Premier Guitar ›
- Guitar DIY: How to Swap a P-90 Pickup With a Humbucker ›
Some of these are deep cuts—get ready for some instrumental bonus tracks and Van Halen III mentions—and some are among the biggest radio hits of their time. Just because their hits, though, doesn’t mean we don’t have more to add to the conversation.
Naturally, every recording Eddie Van Halen ever played on has been pored over by legions of guitar players of all styles. It might seem funny, then, to consider EVH solos that might require more attention. But your 100 Guitarists hosts have their picks of solos that they feel merit a little discussion. Some of these are deep cuts—get ready for some instrumental bonus tracks and Van Halen III mentions—and some are among the biggest radio hits of their time. Just because their hits, though, doesn’t mean we don’t have more to add to the conversation.
We can’t cover everything EVH—Jason has already tried while producing the Runnin’ With the Dweezil podcast. But we cover as much as we can in our longest episode yet. And in the second installment of our current listening segment, we’re talking about new-ish music from Oz Noy and Bill Orcutt.
A dual-channel tube preamp and overdrive pedal inspired by the Top Boost channel of vintage VOX amps.
ROY is designed to deliver sweet, ringing cleans and the "shattered" upper-mid breakup tones without sounding harsh or brittle. It is built around a 12AX7 tube that operates internally at 260VDC, providing natural tube compression and a slightly "spongy" amp-like response.
ROY features two identical channels, each with separate gain and volume controls. This design allows you to switch from clean to overdrive with the press of a footswitch while maintaining control over the volume level. It's like having two separate preamps dialed in for clean and overdrive tones.
Much like the old amplifier, ROY includes a classic dual-band tone stack. This unique EQ features interactive Treble and Bass controls that inversely affect the Mids. Both channels share the EQ section.
Another notable feature of this circuit is the Tone Cut control: a master treble roll-off after the EQ. You can shape your tone using the EQ and then adjust the Tone Cut to reduce harshness in the top end while keeping your core sound.
ROY works well with other pedals and can serve as a clean tube platform at the end of your signal chain. It’s a simple and effective way to add a vintage British voice to any amp or direct rig setup.
ROY offers external channel switching and the option to turn the pedal on/off via a 3.5mm jack. The preamp comes with a wall-mount power supply and a country-specific plug.
Street price is 299 USD. It is available at select retailers and can also be purchased directly from the Tubesteader online store at www.tubesteader.com.
The compact offspring of the Roland SDE-3000 rack unit is simple, flexible, and capable of a few cool new tricks of its own.
Tonalities bridge analog and digital characteristics. Cool polyrhythmic textures and easy-to-access, more-common echo subdivisions. Useful panning and stereo-routing options.
Interactivity among controls can yield some chaos and difficult-to-duplicate sounds.
$219
Boss SDE-3 Dual Digital Delay
boss.info
Though my affection for analog echo dwarfs my sentiments for digital delay, I don’t get doctrinaire about it. If the sound works, I’ll use it. Boss digital delays have been instructive in this way to me before: I used a Boss DD-5 in a A/B amp rig with an Echoplex for a long time, blending the slur and stretch of the reverse echo with the hazy, wobbly tape delay. It was delicious, deep, and complex. And the DD-5 still lives here just in case I get the urge to revisit that place.
Tinkering with theSDE-3 Dual Digital Delay suggested a similar, possibly enduring appeal. As an evolution of the Roland SDE-3000rack unit from the 1980s, it’s a texture machine, bubbling with subtle-to-odd triangle LFO modulations and enhanced dual-delay patterns that make tone mazes from dopey-simple melodies. And with the capacity to use it with two amps in stereo or in panning capacity, it can be much more dimensional. But while the SDE-3 will become indispensable to some for its most complex echo textures, its basic voice possesses warmth that lends personality in pedestrian applications too.
Tapping Into the Source
Some interest in the original SDE-3000 is in its association with Eddie Van Halen, who ran two of them in a wet-dry-wet configuration, using different delay rates and modulation to thicken and lend dimension to solos. But while EVH’s de facto endorsement prompted reissues of the effect as far back as the ’90s, part of the appeal was down to the 3000’s intrinsic elegance and simplicity.
In fact, the original rack unit’s features don’t differ much from what you would find on modern, inexpensive stompbox echoes. But the SDE-3000’s simplicity and reliable predictability made it conducive to fast workflow in the studio. Critically, it also avoided the lo-fi and sterility shortcomings that plagued some lesser rivals—an attribute designer Yoshi Ikegami chalks up to analog components elsewhere in the circuit and a fortuitous clock imprecision that lends organic essence to the repeats.
Evolved Echo Animal
Though the SDE-3 traces a line back to the SDE-3000 in sound and function, it is a very evolved riff on a theme. I don’t have an original SDE-3000 on hand for comparison, but it’s easy to hear how the SDE-3 bridges a gap between analog haze and more clinical, surgical digital sounds in the way that made the original famous. Thanks to the hi-cut control, the SDE-3’s voice can be shaped to enhance the angular aspect of the echoes, or blunt sharp edges. There’s also a lot of leeway to toy with varied EQ settings without sacrificing the ample definition in the repeats. That also means you can take advantage of the polyrhythmic effects that are arguably its greatest asset.
“There’s a lot of leeway to toy with varied EQ settings without sacrificing the ample definition in the repeats.”
The SDE-3’s offset control, which generates these polyrhythmic echoes, is its heart. The most practical and familiar echos, like quarter, eighth, and dotted-eighth patterns, are easy to access in the second half of the offset knobs range. In the first half of the knob’s throw, however, the offset delays often clang about at less-regular intervals, producing complex polyrhythms that are also cool multipliers of the modulation and EQ effects. For example, when emphasizing top end in repeats, using aggressive effects mixes and pitch-wobble modulation generates eerie ghost notes that swim through and around patterns, adding rhythmic interest and texture without derailing the drive behind a groove. Even at modest settings, these are great alternatives to more staid, regular subdivision patterns. Many of the coolest sounds tend toward the foggy reverb spectrum. Removing high end, piling on feedback, and adding the woozy, drunken drift from modulation creates fascinating backdrops for slow, sparse chord melodies. Faster modulations throb and swirl like old BBC Radiophonic Workshop sci-fi sound designs.
By themselves, the modulations have their own broad appeal. Chorus tones are rarely the archetypal Roland Jazz Chorus or CE type—tending to be a bit darker and mistier. But they do a nice job suggesting that texture without lapsing into caricature. There are also really cool rotary-speaker-like textures and vibrato sounds that offer alternatives to go-to industry standards.
The Verdict
The SDE-3’s many available sounds and textures would be appealing at $219—even without the stereo and panning connectivity options, a useful hold function, and expression pedal control that opens up additional options. The panning capabilities, in particular, sparked all kinds of thoughts about studio applications. Mastering the SDE-3 takes just a little study—certain polyrhythms can be dramatically reshaped by the interactivity of other controls and you need to take care to achieve identical results twice. But this is a pedal that, by virtue of its relative simplicity and richness and breadth of sounds, exceeds the utility of some similarly priced rivals, all while opening up possibilities well outside the simple echo realm
Reader: T. Moody
Hometown: Myrtle Beach, South Carolina
Guitar: The Green Snake
Reader T. Moody turned this Yamaha Pacifica body into a reptilian rocker.
With a few clicks on Reverb, a reptile-inspired shred machine was born.
With this guitar, I wanted to create a shadowbox-type vibe by adding something you could see inside. I have always loved the Yamaha Pacifica guitars because of the open pickup cavity and the light weight, so I purchased this body off Reverb (I think I am addicted to that website). I also wanted a color that was vivid and bold. The seller had already painted it neon yellow, so when I read in the description, “You can see this body from space,” I immediately clicked the Buy It Now button. I also purchased the neck and pickups off of Reverb.
I have always loved the reverse headstock, simply because nothing says 1987 (the best year in the history of the world) like a reverse headstock. The pickups are both Seymour Duncan—an SH-1N in the neck position and TB-4 in the bridge, both in a very cool lime green color. Right when these pickups got listed, the Buy It Now button once again lit up like the Fourth of July. I am a loyal disciple of Sperzel locking tuners and think Bob Sperzel was a pure genius, so I knew those were going on this project even before I started on it. I also knew that I wanted a Vega-Trem; those units are absolutely amazing.
When the body arrived, I thought it would be cool to do some kind of burst around the yellow so I went with a neon green. It turned out better than I imagined. Next up was the shaping and cutting of the pickguard. I had this crocodile-type, faux-leather material that I glued on the pickguard and then shaped to my liking. I wanted just a single volume control and no tone knob, because, like King Edward (Van Halen) once said, “Your volume is your tone.”
T. Moody
I then shaped and glued the faux-leather material in the cavity. The tuning knobs, volume knob, pickguard, screws, and selector switch were also painted in the lemon-lime paint scheme. I put everything together, installed the pickups, strung it up, set it up, plugged it in, and I was blown away. I think this is the best-playing and -sounding guitar I have ever tried.
The only thing missing was the center piece and strap. The latter was easy because DiMarzio makes their ClipLock in neon green. The center piece was more difficult because originally, I was thinking that some kind of gator-style decoration would be cool. In the end, I went with a green snake, because crocodiles ain’t too flexible—and they’re way too big to fit in a pickup cavity!
The Green Snake’s back is just as striking as the front.