This bruising 60-watt powerhouse is ready for anything, with three speakers, five reverb and tremolo controls, and a fat boost.
I'd like to pay respect to the Fender Vibro-King. I still remember how I first admired it, brand new in guitar magazines, in 1994. It was the raw, wild, and blonde Viking cousin of the classic vintage Fender amps. I immediately wanted one and got my first in 2004. So, let me share my view on this flagship from Fender's Custom Shop.
The most recent model, the 20th Anniversary Edition, was discontinued in 2014. Other than a change from EL84 to 6V6 tubes in the reverb section for improved durability, the amp circuit was fairly consistent during its years in production. There were various color schemes: blonde, black, light brown, dark brown, naked maple, and hand-tooled Tolex. And for its 3×10 array, Fender used various speakers, starting with blue-framed Eminence alnicos, then Jensen P10Rs and Celestions in custom models.
With dual 6L6GC power tubes and a class AB push/pull configuration, its big-iron transformers produce a whopping 60 watts at 2 ohms. The large power transformer contributes significantly to an overall weight of about 70 pounds. With the right or wrong speakers, this amp can weigh as much as 88 pounds. But contrary to older, less robust vintage Fenders, the Vibro-King's massive, solid cabinet can carry heavy speakers and deliver tons of punchy bass response. A set of Weber 10A150s or Eminence Swamp Thangs has never been more fun. Fender did offer a matching 2×12 extension cabinet for those who wanted a full Vibro-King stack, but I find it loud enough with the three-speaker complement.
Sonically, the Vibro-King falls between tweed and black-panel-era Fenders, whether sparkling clean or wildly cranked, and even at low volume. The amp's distortion is attributable to the design of the preamp section and the lack of a negative feedback loop in the power section. You can dial in a wide span of tones using volume, EQ, and the fat boost—more than a typical vintage Fender amp.
Players seem to either love or hate the Vibro-King. I suspect the haters haven't experimented enough with speakers and EQ settings. The Vibro-King also has an unusual control panel, with a dedicated reverb section, with dwell, mix, and tone dials, and the usual tremolo depth and intensity, plus volume, treble, bass, and mid knobs, and a slider for that fat boost.
If the amp is set in its sweet spot, the footswitchable fat boost will allow you to flip between a clean tone for rhythm or a cranked-up lead tone for solos.
I've kept the light Eminence alnico speakers in my own 1994 Vibro-King. I love the loose low end and strong upper mids. I've found some of the best modern Jimmie Vaughan tones with my amp, but it can also easily do Keith Richards. The quick, snappy response and touch sensitivity allows trebly nuances from your fingertips, strings, and fretboard. If you're into more generic tones or the familiar black-panel Fender sound, Jensen P10Rs or C10Qs will do that for you, too.
Some advice to those who are not into reverb or tremolo: Steer away from this amp! As mentioned, five out of nine faceplate controls are dedicated to reverb and tremolo. If you're into that, the Vibro-King is a delight. The reverb section has the same controls as the classic vintage Fender standalone reverb unit and offers a huge selection of tones. However, the EL84 Vibro-King is known for occasional issues with the reverb circuit, causing overwhelming waves of reverb and burnt tubes. But you can get lucky. I had an EL84 reverb tube in mine for over 15 years.
If the amp is set in its sweet spot, the footswitchable fat boost will allow you to flip between a clean tone for rhythm or a cranked-up lead tone for solos. For some players, this eliminates the need for a boost pedal. It's also worth noting that the tone controls are quite sensitive and differently biased than black-panel and silver-panel Fenders. Expect to spend some time finding good settings.
Here are two tone strategies to try:
- Low volume and high/maximum EQ settings with the fat boost on, which creates a tweed/blonde tone with little clean headroom and lots of preamp gain at low volumes.
- High volume and low EQ settings with the fat boost off, to craft a clean, scooped, black-panel tone, with little or no preamp gain and lots of headroom.
If you haven't played a Vibro-King, you're missing an exciting experience. It's not the amp for everyone, but for some it's the Fender amp they've always looked for. Skeptical? Watch the YouTube clip below of Gary Clark Jr. onstage with the Rolling Stones and John Mayer. As difficult as it can be to cut through when four guitarists are playing together, Clark tears it up with a humbucker-loaded ES-335 through a Vibro-King. Until the next time, may the tone be with you.
The Rolling Stones, Gary Clark Jr. & John Mayer_Going Down Live
- The Legend of Leo Fender - Premier Guitar ›
- Gary Clark Jr.: No Backup Plan - Premier Guitar ›
- Fender Vibro-King 20th Anniversary Amp Review - Premier Guitar ›
- Electro-Harmonix Discontinues New Tube Sales - Premier Guitar ›
- Fender Tone Master Pro Digital Workstation - Premier Guitar ›
- The 10 Biggest Problems With Vintage Fender Amps - Premier Guitar ›
- New Fender Player II Series: Elevate Your Sound - Premier Guitar ›
How this simple sustain stomp helped me bring one of my favorite David Lynch scenes to life and took me across oceans.
There’s a scene in David Lynch’sMulholland Drivewhere Naomi Watts and Laura Harring’s characters find themselves in a darkened, mostly empty theater. Against a backdrop of spooky, synthy chords, they breathlessly watch the night’s oddball emcee deliver an intense, cryptic soliloquy on recorded sound. A trumpet player slowly walks onto the stage, the two characters clutching each other. They—and you—get fully drawn into his muted, jazzy lines. Suddenly, he pulls his instrument away from the mic, throwing his hands in the air. But the solo continues. The narrator looks to the audience: “It’s all recorded.”
Like the best Lynch moments, it’s a thoroughly dramatic moment that needs to be experienced with all applicable senses. Words alone won’t do. This scene is meant to stick with you.
I had that scene in mind as I first plugged into an Electro-Harmonix Freeze. I wanted to play a note and have it keep going … and going … until the audience would see that those notes were just lingering in the air, my strings no longer vibrating, unsure what the effect is. The Freeze could do just that.
“This wasn’t some new iteration of some other effect—a crazy fuzz or a weird flanger. This was a new category.”
If you’ve never played one, the Freeze elegantly holds whatever you give it—a note, a chord, a pick scrape, or whatever else. For such an obvious effect to come out when it did felt so refreshingly groundbreaking. It represented new possibilities. This wasn’t some new iteration of some other effect—a crazy fuzz or a weird flanger. This was a new category.
Back in the ’70s, the EHX team had worked on the idea for a sustain pedal. “At that time, the best I could do was intelligent-splice-single-cycle-looping,” recalls Cockerell. “This looked for a waveform match in the same way that guitar tuning meters do, and then endlessly played one cycle. It worked reasonably well for saxophone or other instruments with strictly harmonic overtones, but it was hopeless for guitar.”
”The pedal only requires one knob for volume, one toggle for latching or fast/slow swell modes, and a footswitch.”
Fast-forward to the early ’00s when DSP chips became available that could reproduce more complex sounds and overtones. While he was working on the EHX Hog with John Pisani, the company’s current-day chief engineer, the idea for a sustain pedal reared its head once again. Cockerell used an algorithm with a special provision that avoids freezing on a pluck transient, thus eliminating the risk of that pesky click. And the Freeze was born.
Released in 2010, the Freeze has a simple beauty. The pedal only requires one knob for volume, one toggle for latching or fast/slow swell modes, and a footswitch. Within, there’s such a wide range of subtlety: How you hit the pedal after your attack greatly affects the response. With the level setting, you can create subtle drones, much like an electronic shruti box, meant to subtly fill space. Or you can set it more obviously as you change chords, freeing up your hands. At higher volume settings in fast momentary mode, you can create glitchy stutter effects. And the way it interacts with other pedals opens up entirely new worlds.
I threw myself into the pedal not long after it hit the market, learning its nuances and eventually buying a second one to create a stereo effect. With my retuned 12-string Strat, I blasted my amps with drones, blowing a few speakers with abandon. Soon, the Freeze changed my approach to the guitar, and I released a series of solo drone and noise albums that took me across the U.S. and Europe. When I recognized Bill Frisell using one during a solo set, I’d bonded with the pedal so much that it was like a friend was sitting in with my favorite guitar player.
“I blasted my amps with drones, blowing a few speakers with abandon.”
There are plenty of pedals that have followed, adding more functionality. EHX’s Pico Deep Freeze, most obviously, but also the Gamechanger Plus, TC Electronic Infinite Sample, and the Chase Bliss Onward—enough that guitar sustain pedals have become their own class of effect. As fabulous as those pedals are, I still cherish the simplicity of the Freeze, a rare thing that leaves all the creative decisions on our side of the pedalboard.
PG's host straps on a prototype Tele to unleash the Knife Drop's horror and heft only to dismantle Jack White's Triplecaster in one accidental Bigsby bomb.
Our columnist links a few memories together to lead us to another obscure guitar model—one he remembers from his childhood and came to acquire as an adult.
Do you have any “click and stick” movies that you love? Like when you are channel surfing and see a movie that you’ve watched a lot, and then just watch it again? Lately, for me, it’s been the 2015 movie The Revenant. It’s a truly brutal tale of survival set in 1820s frontier America. My gosh, that movie just draws me in every time. There’s one scene where the main character goes flying off a cliff while riding a horse! He just sort of falls/rolls through a pine tree and lands in the snow … and he still survives! It’s crazy!
It makes me think about an old childhood friend who lived up the street from me. Jerry and his parents lived in an old house on their grandparents’ large plot of land. On one part of the land there was an old orchard filled with all types of fruit trees and pines, and I remember how we would climb to the top of the pines and just roll ourselves down the side, Revenant style! If you fell the right way, the branches would kind of gently let you down to the next, but if you hit it wrong and got in between the branches, you’d be wrecked. It’s like we enjoyed getting hurt, and, of course, when you’re young, you can snap right back. Ah, the days when pain really didn’t hurt. Now I wake up with injuries, for real.
“The action was way high and the fret ends were sharp. It was basically a painful affair.”
So why am I talking about my click-and-stick movie and stupid childhood escapades? Well, let’s get back to memories of my old friend Jerry. First, the house he lived in was so old that it had real wooden siding, but it hadn’t been painted in forever so the exterior took on a worn, faded, haunted house vibe. Second, his carpet was so tattered that it was being held together with duct tape. Lastly, I remember his dad had a cool, old electric guitar in the living room. His dad would let me play it sometimes, and I remember that it actually hurt to play! The action was way high and the fret ends were sharp. It was basically a painful affair. Not falling-out-of-a-tree painful, but as bad as it comes with guitars. It had the label “Conrad,” and young Frank didn’t realize that he’d be looking for that guitar again one day. I mean, it did have four pickups and lots of knobs and switches!
Made at the old Japanese Matsumoko factory in the ’60s, this Conrad Bison 1233 has four pickups and a 27" scale.
Years later, I would discover that his was a Conrad Bison guitar. The model came in a few different configurations, but the four-pickup design was designated as the 1233. Primarily featuring a lovely sunburst, these Bisons were made at the amazing old Matsumoku factory in Japan and were imported by the David Wexler Company that was based in Chicago. Matsumoku always had a good supply of aged wood, and many of the guitars made there are resonant and built well. The Bisons first appeared around 1966 and had a rather good run into the early ’70s.
Simple volume/tone knobs are paired with preset solo/rhythm switches that power alnico magnets. There’s an on/off switch for each pickup, and the sound really covers all the bases. Thumpy lows and crisp highs are all there. And, the pickups handle fuzz and distortion with ease. The Bisons also came in one- and two-pickup configurations with a normal scale, but the four-pickup ones have a longer, 27" scale, which is common for Matsumoku-made electrics.
So there it is: pain, survival, American frontier, Bison, haunted houses. It all sticks together like a duct-taped carpet. Click and stick, baby!
A 1000-watt speaker cabinet crafted for musicians who demand power and precision. Sunn Amps intends to reinvent the standard 4x12 configuration with the introduction of this new cabinet.
The Sunn Amps DoomBox is built to accommodate both guitar and bass, offering an impressive 1000-watt handling capacity—making it the first commercially available 4x12 cabinet with such high power handling. With four specially designed 12” drivers rated at 250 watts each, this cabinet provides clean, unrestrained sound levels that can maintain power integrity across all frequencies, ideal for high-volume performances.
Inspired and developed using feedback from artists and bands who rely on the depth of lower tunings and high volume genres, the DoomBox was engineered to meet the unique demands of professional musicians looking for a robust, high-efficiency cab that can translate the raw power of their sound without compromise.
Premium Craftsmanship and Materials
The Doom Box cabinet is crafted from solid finger-jointed Baltic Birch plywood, ensuring both durability and tonal clarity. Each cabinet is constructed by hand in the U.S.A. using original 1930s machinery, the DoomBox reflects Sunn’s historic commitment to quality, contrasting with some of the mass-produced, MDF-based cabinets on the market today. The cabinet’s aluminum basket, ferrite magnet, and custom Sunn weave Tolex with a custom grill design complete its professional-grade build.
Technical Specifications:
• Power Handling: 1000W
• Inputs: 1 x ¼”
• Impedance: 8 Ohm
• Drivers: 4 x Sunn 12S250
• Construction: Marine Grade Baltic Birch
• Dimensions: 29.25” X 30” X 14”
• Weight: 107 lbs
• Price: $2399.00
With clear low-end punch, even sound response, and ample air movement, the Doom Box ensures that every note reaches the audience with clarity and power. This cabinet is a game-changer for musicians who need high-performance, road-ready equipment that enhances their unique sound.