We asked and you delivered! PG tapped its diverse audience to see what prized possessions our readers keep in their personal gear collections. The submissions ran the gamut from a holy-grail guitar acquired via inheritance, a high-school graduation present, a post-coma-recovery treat, a rockin’ wedding gift, a self-build project, and many great tales of cherished tone tools.
Colin O'Hara
My mum passed away a few years ago and left me some inheritance. I used some of that money to get something I would’ve never afforded otherwise, and I knew it would never leave my side as long as I live—the above 1964 Fender Jaguar (from the pre-CBS era). It’s my most valuable (sentimental) possession and the most amazing guitar to play to boot!
Steve Tanner
If I had to pick just one it would be my 2016 Gibson Les Paul Traditional. We had lost both parents in rapid succession and after we settled everything, I had enough for a down payment on a condo and I set aside some money for a new guitar. It’s kind of the last thing they gave me.
Eric Tower
My 2011 Gibson Les Paul Studio Deluxe that I bought with my high-school graduation money. With its coil-tapping capability, I can achieve single-coil sounds along with the typical humbucker sounds of a Les Paul. And it has the most-comfortable neck I’ve ever played as well. It’s been my main guitar ever since I bought it!
Antoine Lespine
My Fender Super-Sonic. It’s not an expensive guitar but I wanted it for a long time. Finally, after recovering from a coma and long hospitalization, I decided to buy it just for the pleasure of enjoying life.
Dave Dardo
My 1983 Fender Strat Elite (hard tail) because it’s so versatile. It offers pleasing bright tones and with the turn of a few controls I can get some nice, thick mids. Pairing it with a Mesa/Boogie Single Rectifier 50-watt head into a Budda 2x12 and 2x10 open-and-closed back combination cabinet is magic.
Geo Jet
For many years, this was my go-to rig for larger venues. It’s so adaptable with the Seymour Duncan Antiquity II Mini Humbuckers in the Firebird going through the Marshall Vintage Modern half-stack. And for straight-out rock and blues, the smallbox 1987 Marshall Jubilee 2553 stack just can’t be beat.
Jeff Boule
To me, prized = integral. When you bill yourself as an electronic guitarist, you need a guitar to interface. My 1977 Fender Mustang that has a Roland GK-2 Guitar Synthesizer pickup paired with a set of Lace Red and Blue single-coils—plus a Kahler Trem and Sperzel Locking tuners—does just that. It’s my first guitar and still my main guitar.
Charles Gouger
This is my collection. The one I save if my house is on fire is my white Fender Mustang (on the couch). It’s the cheapest one in my collection, but the one I cherish the most.
Ray Vasquez
I seriously can’t pick! I waited all my life to have a setup like this: a 2005 Fender Stratocaster (MIM) that has a Seymour Duncan SJBJ-1b JB Jr Strat humbucker (bridge) matched with Seymour Duncan Antiquity single-coils (middle and neck). The VHT 12/20 is dimed for dirt, while the Vintage Sound Vintage 35 (Vibrolux-style 1x12 combo) is a loud 35 watts, so I only run it at 2.5 for cleans. This is the best tone I've ever had.
Justin Michael-Thermal Tran-Sheetz
My prized possession has to be the Tele I put together using a custom Warmoth body and neck. The body is mahogany with a cherry burst and the neck is roasted maple with a reverse headstock. I loaded this with some Seymour Duncan P-90s (the bridge has a humbucker-sized P-90) and wired a volume boost on my push-push tone knob. It plays like a dream and sounds amazing.
Bones BFMC
My first Gibson was a 1959 Melody Maker I got in 1973 from my aunt for $100 including a Gibson amp. Never looked back!
John Farmen
My 1959 ’burst clone. I never thought I’d like something that wasn’t a Tele so much.
Gregory DuPont
Easy! It’s my 2009 Ibanez Xiphos XPT700 that has a custom powder-coated trem, pickup rings, and tuning pegs.
Tracy Cooper
I have five Strats, two basses, a Tele, and three acoustics, but my go-to is the beautiful Beatrice. She’s a Jim Deacon Strat-style guitar that carries Ernie Ball Regular Slinkys (.010–.046). She’s heavy to hold, but she sounds amazing. I bought her as a run-down, non-working wreck, and I brought her back to life. She’s mama’s best girl!
Rob Peard
I gotta say it’s my Supro Limited Edition David Bowie Dual Tone with Bigsby (seen alongside the Milkman Sound The Amp). Some might say this is a shameless cash-in on Bowie’s legacy, but to be honest, I had always wanted this model because I’m a Link Wray fan foremost. Plus, I liked the idea of having a Bigsby without the compatibility issues of the original. It took over a year to receive my order, but it was perfectly constructed and set up. This is #115 of 432 made.
JB Gimena
My 2012 Fender American Vintage ’52 Telecaster is my number one guitar. It’s most precious to me because it was a gift from my wife for our wedding.
Ryan Coy
I’m a big David Gilmour fan, so it has to be my Black-Strat-esque Stratocaster that I pieced together. It features the same pickups as his signature Custom Shop model—Seymour Duncan SSL-5 Single-Coil Strat (bridge), Custom-wound Single-Coil Strat (middle), and Custom Shop Fat ’50s Single-Coil Strat (neck)—and an American Vintage synchronized tremolo with a shortened trem bar.
Phillip Eakens
Can’t make a decision so I’ll say my 2001 Gibson Les Paul Standard—arguably the world’s most perfect guitar—and my 1959 Harmony Stratotone. (It was the first guitar I ever played.) Can you hear that? The sustain … well you would if you were playing it!
Jesse Shafer
My prized possession is the guitar I built during the summer after I graduated high school. It has a mahogany neck and body, a maple top, and a rosewood fretboard. It has a Gibson scale length, and its neck is modeled after my other Les Paul, but it thins out towards the body and has a volute. Hardware includes Grover tuners and a Gotoh bridge. I disconnected the bridge pickup, and the neck pickup is a Seymour Duncan JB with 500k volume and tone pots. The side dots were made with red and blue crushed-up colored pencils. I spent about 10 hours making the truss rod cover by plying all kinds of wood-scraps together. I finished it with polyurethane. While I was buffing the body, I accidentally dropped the guitar and the body cracked in half. At one time, the entire back of it was covered in red paint. In a panic to get the paint off, I ended up touching the front of it and now there are red fingerprints on the front within the finish. The bolt-on neck joint is super crude. I made a little wooden badge inside the “f” hole.
It’s very rough around the edges—I was 18 and idiotic when I built it. That said, it plays and sounds like a dream. One of the most resonant guitars I’ve played and certainly the most resonant that I own. Intonation is astoundingly spot on. I have played many gigs with this guitar and have logged a couple thousand practice hours on it. I wouldn’t trade it or the stories I have with it for the world!
Ben Robertaccio
This 2000s Gibson Vegas Standard and my all-rosewood Tele work in almost every recording situation.
Rambo Brown
This EVH 5150III head has something special in it! I’ve tried to replace it with other EVH options (100W, EL34, 50W Stealth), but nothing ever works like it does. It pisses me off and haunts me in my sleep. I always come back to this MF-er!
Reza Moosavi
I’ve been lucky enough to acquire a few Kenneth Lawrence instruments. The first (and my favorite) is this Custom Explorer, aka “The White Walker.” This is ultimately the best guitar I’ve ever played for a multiplicity of reasons: Its level of clarity, punch, and sustain. The craftsmanship is breathtakingly exact, and it feels absolutely smooth due to the hand-rubbed oil finish.
Danny Medrano
I own my dream guitar! It’s a Gibson RD with Fishman Fluence Modern humbuckers. It’s so well balanced, the action is perfect, and its intonation is perfect. It handles every type of tone or style you can throw at it. Plus, it’s just a sexy hunk of mahogany. (These Dr. Z cabs are a close second.)
Reinaldo Andrade
My mid-’90s Yamaha Pacifica 912J. When I first saw the photo of Michael Lee Firkins with a Pacifica in Yamaha ads in guitar magazines, I knew that one day I would have my own. It was love at first sight.
Back to my 912J—it’s an incredible guitar. You can play all styles of music with ease, and it has beautiful tones. Inside detail: it came from the factory with DiMarzio pickups (a custom humbucker in the bridge and a pair of HS-2 single-coils in the middle and neck positions). If I had to stay with just one guitar, it would be this one.
Matt Deeley
This 2003 Gibson Les Paul Standard. And for me, the Les Paul’s from this era were superb. I’ve owned many guitars over the years, but this is the only one that’s stayed the course. It’s been played to death.
Joseph Torres
This is my PRS SE Mark Tremonti. (I believe it’s from 2012 judging by the serial number.) I’ve had this guitar for five years now and it’s become my ace. I love it because of its versatility and how comfortable it fits in my hands. Every time I pick it up, I remember why I wanted it in the first place. Oh yeah, I got tacky and put an Apple sticker on it. Anyway, it’s a great guitar and I can’t recommend PRS enough.
Richard Leo
I can’t afford a Gibson, but I didn’t need to with this one. The mid-’90s, Asian-made Vesta copy has the weight, tone, and feel of a Gibson 10 times its price. Plugged into my Laney VC30-212 and with clever manipulation of the tone and volume dials, I almost never need pedals. It was stolen a couple of years ago in a home robbery and still hasn’t resurfaced in the second-hand market. I haven’t found anything quite like it since.
Ryan Embree
My PRS Torero. I got it modded the way I want it with all kinds of FU-Tone goodies. This thing screams and is my main for a reason. I found it while used-guitar hunting and fought with the seller super hard to even get my hands on it.
Jeremy Santos
My 1980 Guild D-25 (made in Westerly, Rhode Island). I’m only the third owner of this absolute workhorse guitar. In fact, the guy I bought it from had a Fishman Matrix system put into it at a store in Westerly by a former Guild employee! As a founding member of a local Rhode Island acoustic duo, having a well-built, amazing-sounding acoustic is a top priority. I’ve used many different guitars over the years, but none compared to the sound and feel of this Guild! This will always be my number one. And being a Rhode Islander myself, having a guitar that was built here is pretty cool!
Rod Nesser
My 2012 Fender Cabronita FSR (MIM) that’s been retro-fitted with Fender locking tuners, a Rutters La Burrito bridge, a Les Paul-type, square-brass jack plate, and a Warmoth .09 black pickguard. I purchased this guitar in 2012 and it’s been my number one instrument since. In fact, I seldom play any of my other guitars. Together with my Vox AC30C2, Boss FRV-1 Reverb, and Selah Effects Feather Drive, this guitar has been my tone for the last eight years (and I don’t intend to change anything anytime soon). Initially, I did contemplate replacing the Fideli’Tron humbuckers for actual TV Jones Filter’Trons, but I actually like how the original Fideli’Trons sound through my amp against the bass player and loud drummer—they really cut through live! Needless to say, this axe is a keeper!
- My Biggest Gear Regret - Premier Guitar ›
- My First Guitar - Premier Guitar ›
- Question and Obsession: Hand-Me-Downs - Premier Guitar ›
- 10 Young Guitar Guns to Know - Premier Guitar ›
Duane Denison of the Jesus Lizard, EGC Chessie in hands, coaxing some nasty tones from his Hiwatt.
The Jesus Lizard’s sixth album, Blue, served as the band’s final statement from the frontlines of noisy rock for the next 26 years. By the time of their dissolution in 1999, they’d earned a reputation for extreme performances chock full of hard-hitting, machine-like grooves delivered by bassist David Wm. Sims and, at their conclusion, drummer Mac McNeilly, at times aided and at other times punctured by the frontline of guitarist Duane Denison’s incisive, dissonant riffing, and presided over by the cantankerous howl of vocalist David Yow. In the years since, performative, thrilling bands such as Pissed Jeans, METZ, and Idles have built upon the Lizard’s musical foundation.
Denison has kept himself plenty busy over the last couple decades, forming the avant-rock supergroup Tomahawk—with vocalist Mike Patton, bassist Trevor Dunn (both from Mr. Bungle), and drummer John Stanier of Helmet—and alongside various other projects including Th’ Legendary Shack Shakers and Hank Williams III. The Jesus Lizard eventually reunited, but until now have only celebrated their catalog, never releasing new jams.
The Jesus Lizard, from left: bassist David Wm. Sims, singer David Yow, drummer Mac McNeilly, and guitarist Duane Denison.
Photo by Joshua Black Wilkins
Back in 2018, Denison, hanging in a hotel room with Yow, played a riff on his unplugged electric guitar that caught the singer’s ear. That song, called “West Side,” will remain unreleased for now, but Denison explains: “He said, ‘Wow, that’s really good. What is that?’ And I said, ‘It’s just some new thing. Why don’t we do an album?’” From those unassuming beginnings, the Jesus Lizard’s creative juices started flowing.
So, how does a band—especially one who so indelibly captured the ineffable energy of live rock performance—prepare to get a new record together 26 years after their last? Back in their earlier days, the members all lived together in a band house, collectively tending to the creative fire when inspiration struck. All these years later, they reside in different cities, so their process requires sending files back and forth and only meeting up for occasional demo sessions over the course of “three or four years.”
“When the time comes to get more in performance mode, I have a practice space. I go there by myself and crank it up. I turn that amp up and turn the metronome up and play loud.” —Duane Denison
the Jesus Lizard "Alexis Feels Sick"
Distance creates an obstacle to striking while the proverbial iron is hot, but Denison has a method to keep things energized: “Practice loud.” The guitarist professes the importance of practice, in general, and especially with a metronome. “We keep very detailed records of what the beats per minute of these songs are,” he explains. “To me, the way to do it is to run it to a Bluetooth speaker and crank it, and then crank your amp. I play a little at home, but when the time comes to get more in performance mode, I have a practice space. I go there by myself and crank it up. I turn that amp up and turn the metronome up and play loud.”
It’s a proven solution. On Rack—recorded at Patrick Carney’s Audio Eagle studio with producer Paul Allen—the band sound as vigorous as ever, proving they’ve not only remained in step with their younger selves, but they may have surpassed it with faders cranked. “Duane’s approach, both as a guitarist and writer, has an angular and menacing fingerprint that is his own unique style,” explains Allen. “The conviction in his playing that he is known for from his recordings in the ’80s and ’90s is still 100-percent intact and still driving full throttle today.”
“I try to be really, really precise,” he says. “I think we all do when it comes to the basic tracks, especially the rhythm parts. The band has always been this machine-like thing.” Together, they build a tension with Yow’s careening voice. “The vocals tend to be all over the place—in and out of tune, in and out of time,” he points out. “You’ve got this very free thing moving around in the foreground, and then you’ve got this very precise, detailed band playing behind it. That’s why it works.”
Before Rack, the Jesus Lizard hadn’t released a new record since 1998’s Blue.
Denison’s guitar also serves as the foreground foil to Yow’s unhinged raving, as on “Alexis Feels Sick,” where they form a demented harmony, or on the midnight creep of “What If,” where his vibrato-laden melodies bolster the singer’s unsettled, maniacal display. As precise as his riffs might be, his playing doesn’t stay strictly on the grid. On the slow, skulking “Armistice Day,” his percussive chording goes off the rails, giving way to a solo that slices that groove like a chef’s knife through warm butter as he reorganizes rock ’n’ roll histrionics into his own cut-up vocabulary.
“During recording sessions, his first solo takes are usually what we decide to keep,” explains Allen. “Listen to Duane’s guitar solos on Jack White’s ‘Morning, Noon, and Night,’ Tomahawk’s ‘Fatback,’ and ‘Grind’ off Rack. There’s a common ‘contained chaos’ thread among them that sounds like a harmonic Rubik’s cube that could only be solved by Duane.”
“Duane’s approach, both as a guitarist and writer, has an angular and menacing fingerprint that is his own unique style.” —Rack producer Paul Allen
To encapsulate just the right amount of intensity, “I don’t over practice everything,” the guitarist says. Instead, once he’s created a part, “I set it aside and don’t wear it out.” On Rack, it’s obvious not a single kilowatt of musical energy was lost in the rehearsal process.
Denison issues his noisy masterclass with assertive, overdriven tones supporting his dissonant voicings like barbed wire on top of an electric fence. The occasional application of slapback delay adds a threatening aura to his exacting riffage. His tones were just as carefully crafted as the parts he plays, and he relied mostly on his signature Electrical Guitar Company Chessie for the sessions, though a Fender Uptown Strat also appears, as well as a Taylor T5Z, which he chose for its “cleaner, hyper-articulated sound” on “Swan the Dog.” Though he’s been spotted at recent Jesus Lizard shows with a brand-new Powers Electric—he points out he played a demo model and says, “I just couldn’t let go of it,” so he ordered his own—that wasn’t until tracking was complete.
Duane Denison's Gear
Denison wields his Powers Electric at the Blue Room in Nashville last June.
Photo by Doug Coombe
Guitars
- Electrical Guitar Company Chessie
- Fender Uptown Strat
- Taylor T5Z
- Gibson ES-135
- Powers Electric
Amps
- Hiwatt Little J
- Hiwatt 2x12 cab with Fane F75 speakers
- Fender Super-Sonic combo
- Early ’60s Fender Bassman
- Marshall 1987X Plexi Reissue
- Victory Super Sheriff head
- Blackstar HT Stage 60—2 combos in stereo with Celestion Neo Creamback speakers and Mullard tubes
Effects
- Line 6 Helix
- Mantic Flex Pro
- TC Electronic G-Force
- Menatone Red Snapper
Strings and Picks
- Stringjoy Orbiters .0105 and .011 sets
- Dunlop celluloid white medium
- Sun Studios yellow picks
He ran through various amps—Marshalls, a Fender Bassman, two Fender Super-Sonic combos, and a Hiwatt Little J—at Audio Eagle. Live, if he’s not on backline gear, you’ll catch him mostly using 60-watt Blackstar HT Stage 60s loaded with Celestion Neo Creambacks. And while some boxes were stomped, he got most of his effects from a Line 6 Helix. “All of those sounds [in the Helix] are modeled on analog sounds, and you can tweak them endlessly,” he explains. “It’s just so practical and easy.”
The tools have only changed slightly since the band’s earlier days, when he favored Travis Beans and Hiwatts. Though he’s started to prefer higher gain sounds, Allen points out that “his guitar sound has always had teeth with a slightly bright sheen, and still does.”
“Honestly, I don’t think my tone has changed much over the past 30-something years,” Denison says. “I tend to favor a brighter, sharper sound with articulation. Someone sent me a video I had never seen of myself playing in the ’80s. I had a band called Cargo Cult in Austin, Texas. What struck me about it is it didn’t sound terribly different than what I sound like right now as far as the guitar sound and the approach. I don’t know what that tells you—I’m consistent?”
YouTube It
The Jesus Lizard take off at Nashville’s Blue Room this past June with “Hide & Seek” from Rack.
Phat Machine
The Phat Machine
The Phat Machine is designed to deliver the tone and responsiveness of a vintage germanium fuzz with improved temperature stability with no weird powering issues. Loaded with both a germanium and a silicon transistor, the Phat Machine offers the warmth and cleanup of a germanium fuzz but with the bite of a silicon pedal. It utilizes classic Volume and Fuzz control knobs, as well as a four-position Thickness control to dial-in any guitar and amp combo. Also included is a Bias trim pot and a Kill switch that allows battery lovers to shut off the battery without pulling the input cord.
Silk Worm Deluxe Overdrive
The Silk Worm Deluxe -- along with its standard Volume/Gain/Tone controls -- has a Bottom trim pot to dial in "just the right amount of thud with no mud at all: it’s felt more than heard." It also offers a Studio/Stage diode switch that allows you to select three levels of compression.
Both pedals offer the following features:
- 9-volt operation via standard DC external supply or internal battery compartment
- True bypass switching with LED indicator
- Pedalboard-friendly top mount jacks
- Rugged, tour-ready construction and super durable powder coated finish
- Made in the USA
Static Effectors’ Street Series pedals carry a street price of $149 each. They are available at select retailers and can also be purchased directly from the Static Effectors online store at www.staticeffectors.com.
Galloup’s Plek tech Adam Winarski preps a Yamaha acoustic for the machine.
Presently, many certified guitar-repair specialists possess the expertise required to deliver an instrument that both sounds and plays wonderfully. The standards set by manufacturers and distributors have significantly risen, safeguarded by rigorous quality protocols to guarantee the best possible acoustic experience for customers. Additionally, lutherie training has raised the bar for critical processes, and one of the most tricky is fretwork.
Traditional fretwork once involved manual labor, with technicians utilizing sandbags or similar supports to steady the neck as they straightened it with a truss rod during the filing process. A notable advancement in this field came in the mid 1970s when Don Teeter, an author and repair expert, imposed a new method: fixing the guitar body to the bench and using blocks to maintain the neck in a playing position. This refinement was one of many in the continued quest to produce superior instruments by standardized methods.
An example of the Plek’s readings from an acoustic guitar.
Photo courtesy of Galloup Guitars
In the late 1970s, another pivotal innovation was introduced by Dan Erlewine. He created an advanced fret jig with a specialized body-holding system and neck supports, adding another layer of precision to the repair process. During my collaboration with Dan in 1985, we developed a rotating neck jig that counterbalanced the forces of gravity, keeping the instrument in its playing orientation while adjusting the neck supports. This step represented a significant leap in establishing control and standardization of fretwork procedures in our industry. By 1986, our approach had evolved into a freestanding workstation coupled with a sophisticated hold-down mechanism and enhanced neck supports, culminating in increased accuracy, efficiency, and consistency. Over the decades, the Erlewine/Galloup rotating neck jig has become a benchmark in numerous shops, enhancing fretwork performance.
"This step represented a significant leap in establishing control and standardization of fretwork procedures in our industry."
By the 1990s, automated and computerized technologies permeated the guitar manufacturing and repair sectors. Initially applied by import companies in the mass production of guitars, the technology, although expediting processes, did not immediately achieve high execution standards. However, the tech dramatically improved over time, with computer-driven systems eventually transforming the industry. Contemporary automated production utilizing such advancements meets exceedingly high standards of precision. Some bespoke guitar manufacturers, such as Steve Andersen, were pioneers in adopting these methods, but it was companies like Taylor that established them in the modern era.
Inevitably, the progression of technology extended beyond the mere production of parts. Around 1995, German engineer Gerd Anke envisioned the integration of computer-assisted technology into enhancing instrument playability, giving rise to Plek technology, which uses computers to precisely measure and analyze the various components of a guitar, like neck relief, fret height, nut and bridge specs, and more. Nashville guitar-repair tech Joe Glaser was among the first to recognize the machine’s value, followed by San Francisco luthier Gary Brawer. When Heritage Guitar Inc. invested in a Plek machine, the guitar industry could no longer disregard the significance of this innovation.
“The machine’s scanning data confirmed that there was one nature of an ideal fret plane, done by hand or machine, and unsurprisingly, it conformed exactly to what physics predicts, not personal mojo.”
In the spring of 2022, Galloup Guitars obtained its first Plek machine. Promptly, our technician Adam Winarski paved the way for the Plek’s integration in our shop. Now, it’s a rarity for an instrument to leave our shop without having undergone Plek analysis and machining. Impressed by the results of our integration, we created “Intro to Plek” as a course for all students enrolled at the Galloup School of Lutherie, offering our students a practical introduction to this technology. We furthered this educational initiative with a comprehensive one-week intensive “Plek Certification Training Course” for both students and the public. This advanced Plek course serves those seeking to boost their knowledge base and employability in this high-precision field.
Plek is rapidly becoming an industry standard for major manufacturers and smaller shops alike. However, this does not mean that those without access to this technology cannot execute proficient fretwork. Personally, I continue to use my Erlewine/Galloup neck jig—not only out of nostalgia, but also because it remains an excellent method for delivering accurate and reliable guitars. Still, it’s undeniable that the process of fretting, fret dressing, and analytics of fretted instruments has undergone significant transformation, resulting in better sounding—and playing—guitars. And ultimately, that’s what it’s all about.