Real optical modulation circuity and a digital spring reverb add up to luxurious, expansive, and authentic Uni-Vibe sounds.
Rich, authentic Uni-Vibe sounds from a real optical circuit. Spring reverb and Uni-Vibe are like chocolate and peanut butter!
No expression pedal option. Expensive. Reverb can sound more reflective than washy.
$449
J. Rockett Uni-Verb
rockettpedals.com
If you were designing a loving and largely accurate stompbox homage to the Uni-Vibe, adding the sound of spring reverb might not be an obvious move. The original Uni-Vibe certainly didn’t have a spring reverb built into that big, clunky enclosure. So why would J Rockett pursue this path? Because it’s incredibly fun and sounds amazing—that’s why.
Swirl and Splash
Though its reverb component is digital, Uni-Verb’s modulation section is not a digital facsimile. It’s a true, optical chorus-and-vibrato (some might say phaser-and-vibrato) circuit, just like the original Uni-Vibe—right down to the little lamp that pulsates among optical sensors at the center of the ordered and neatly executed circuit board.
The hefty enclosure (J. Rockett pedals always feel more like high-quality test instruments from the 1950s than guitar pedals) is a handsome homage to the original Uni-Vibe, right down to little details like the chicken head knobs and “clock” markers that surround the chorus mix and reverb dwell dials. On an original Uni-Vibe, the two big dials (in fact, the only dials) are dedicated to output volume and modulation intensity. Here, those chores are handled by two small knobs in the pedal’s center. The two additional knobs in the middle are reverb intensity (wet/dry mix) and the modulation rate control. Sadly, there is no expression pedal option for the rate, which, functionally speaking, makes the Uni-Verb a little less authentic.
Uni-Verb’s modulations are thick and chewy enough to make you feel like you’re sitting in a molasses puddle.
The Uni-Verb’s reverb, which is generated via an Accutronics Digi-Log module, is immersive, engaging and fun. At higher levels it exhibits an almost staccato, super-reflective reverb texture rather than the washy decay I hear in the ’60s black-panel Fender combo I used for comparison. This isn’t an altogether uncommon phenomenon in digital spring reverb approximations—even in expensive, DSP-intensive ones. In isolation, this facet of the Uni-Verb’s reverb sound is much more apparent. And it’s most obvious when playing choppy chords or spacious lead lines peppered with strong transients. Passing chords and busier lead lines, however, tend to obscure the phenomenon, and once the reverb signal is enmeshed with the beautiful modulations you rarely notice it. That quirk aside, Uni-Vibe’s reverb still sounds very much like real spring reverb. And when you’re playing or listening to playback it exerts much of the same visceral tug and in-your-face snappiness of real spring reverb.
Human Chew Toy
At the highest intensity settings, the Uni-Verb’s modulations are thick and chewy enough to make you feel like you’re sitting in a molasses puddle. I played at these high intensity levels often in my time with the Uni-Verb. You could swim in a two-chord vamp forever here, and the pedal remains articulate in these spaces, even when you push the chorus mix. I’m sure some players would like for the pedal to probe more radical modulation zones. But I love the headroom that’s built in at these high intensity levels. It makes the pedal more articulate and detailed, and you can dial in even more headroom if you keep the output level on the high side but just short of maximum. Needless to say, fuzz is a very sweet match for this pedal. And though, in my experience, some dark fuzzes or overdrives blur modulation detail and overtones in Uni-Vibe clones, the Uni-Verb is very accommodating of these voices. Even Sovtek-style Big Muffs sound alive and full of color and detail riding these waveforms. Gilmour obsessives take note.
The Verdict
Like so many J. Rockett pedals, the Uni-Verb sounds like the product of thoughtful design and intent, feels like a brick, and reflects a curiosity-driven “what-if” design mentality that, ultimately, yields sounds you don’t typically encounter in a single pedal. It might not fix all your pedalboard overcrowding problems. But on more than one occasion I considered that I could very easily get away with playing a show with this pedal and nothing else. And though at $449 it represents a considerable investment, you’ll be hard-pressed to find a more authentic Uni-Vibe pedal, and harder-pressed to find one that adds up to such a huge-sounding whole.
J. Rockett Uni-Verb Demo | PG Plays
Uni-Verb Chorus/Vibrato Pedal
The Uni-Verb gives you access to the classic vibe-style textures showcased on such classics as Robin Trower's "Bridge of Sighs," Jimi Hendrix's "Machine Gun," Pink Floyd's "Breathe," and a whole host of others. This stompbox delivers the full gamut of the original's chorus and vibrato effects, along with a spring reverb for added vintage mojo and dimension. When the guitarists here at Sweetwater really want to nail classic vibe-style tones, we like to place the unit before our drives.
- First Look: Supro 1313 Analog Delay - Premier Guitar ›
- J. Rockett Audio Designs El Hombre Overdrive Pedal Demo by John ... ›
- J. Rockett Audio Designs Uni-Verb Demo - Premier Guitar ›
- Discover the Ultimate Tone Tool: J. Rockett PXO Review - Premier Guitar ›
Ernie Ball, the world’s leading manufacturer of premium guitar strings and accessories, proudly announces the launch of the all-new Earthwood Bell Bronze acoustic guitar strings. Developed in close collaboration with Grammy Award-winning guitarist JohnMayer, Bell Bronze strings are engineered to meet Mayer’s exacting performance standards, offering players a bold new voice for their acoustic guitars.Crafted using a proprietary alloy inspired by the metals traditionally found in bells and cymbals, Earthwood Bell Bronze strings deliver a uniquely rich, full-bodied tone with enhanced clarity, harmonic content, and projection—making them the most sonically complex acoustic strings in the Ernie Ball lineup to date.
“Earthwood Bell Bronze strings are a giant leap forward in tone, playability, and durability. They’re great in any musical setting but really shine when played solo. There’s an orchestral quality to them.” -John Mayer
Product Features:
- Developed in collaboration with John Mayer
- Big, bold sound
- Inspired by alloys used for bells and cymbals
- Increased resonance with improved projection and sustain
- Patent-pending alloy unique to Ernie Ball stringsHow is Bell Bronze different?
- Richer and fuller sound than 80/20 and Phosphor Bronze without sounding dark
- Similar top end to 80/20 Bronze with richer low end than Phosphor Bronze
Milkman’s Jerry Garcia-style JG-40 combo.
Grateful Dead-inspired gear from Milkman and Scarlet Fire helps to keep the guitarist’s sound alive.
Guitar players wanting to catch the Grateful Dead’s particular lightning in a bottle exist along a spectrum. Some are content to take inspiration from Jerry Garcia’s playing but make their own way regarding guitar choice and signal path. Others strive to emulate Garcia’s sonic decisions down to the most minor details and create signal paths as close to Jerry’s as possible. In recent years, an ecosystem of gear has developed around fostering Jerry Garcia’s electric tone, including everything from guitars, amps, and stompboxes to on-board preamps and speakers.
Entire books about the Grateful Dead’s gear have been written, so we can’t cover it all here. Garcia tinkered with all facets of his sound from about 1971 until 1978, when his signal path reached stability. By then, his On-Board Effects Loop—an innovation he developed to control how much signal reached his effects—was dialed in, his backline firm, and his choice of effects pedals solidified. Even then, adjustments were made, especially when MIDI arrived or when technology like in-ear monitoring was used. Here are some basics.
Scarlet Fire’s recreation of Garcia’s Wolf, originally built by Doug Irwin.
It starts with guitars. For players wanting to get their Jerry on, there’s a wide range of Garcia-esque instruments—with just as wide a range of prices—out there. Recreations of the Doug Irwin guitars and the Fender Alligator Strat abound. China-built models from companies likePhred Instruments can go for as little as $700 or so. Luthier Thomas Lieber apprenticed with Irwin long ago, and his Lieber Guitars will deliver a copy of a variety of Garcia models. Leo Elliott’sScarlet Fire Guitars out of Dallas, Texas, takes things in another direction. Elliott builds Doug Irwin replicas that start at $20,000 and go up from there, with a current wait time of about 18 months for an instrument. He’s outfitted many of the top Garcia guitarists today, including Tom Hamilton Jr. and Jeff Mattson. Elliott says, “I’m a self-taught luthier; I didn’t really build my first guitar until 2010. I understood a little bit about woodworking before I got started, but I learned by reading books and through trial and error. I started building replicas of Doug Irwin’s Wolf guitar right away, which is sort of like building a car and starting with a Ferrari. I didn’t know any better. Then, eventually I got to know Doug Irwin and collaborated with him. So, I got to hold Garcia’s Tiger guitar and get to know it really well, and by 2015, I had built replicas of that guitar. There’s one guy who helps me around the shop, but otherwise, I am building these guitars on my own. I’m collaborating with Doug Irwin on a new series of Tiger guitars, which will retail for 50 grand each.” That’s one way to get your Jerry going.
The JBL-inspired Milkman K-120.
Garcia’s choice of amplifiers is another matter. He preferred Fender Twin Reverbs loaded with JBL Alnico speakers, which were popular amongst many rock bands in the 1970s. The details get complicated; Garcia’s amps were heavily modified, and the Fender Twin served as a preamp that ran to a McIntosh MC-3500 power amp.
It’s hard to find vintage JBL speakers today—at least ones in good shape. San Francisco’s Milkman Sound, founded by Tim Marcus, has created a faithful reproduction of those classic JBLsthey call the K-120. They’re coupling those speakers with a Garcia-style recreation of his Fender Twin that Marcus named the JG-40. “I think 75 percent of Jerry’s tone is in the JBL speakers,” Milkman’s founder says. “But when you start to analyze the other 25 percent, you kind of have to start withDon Rich. [Editor’s Note: Rich was the guitar player in Buck Owens’ band, pioneers of the Bakersfield Sound.] That’s Jerry’s tone, too, but the difference is Garcia’s midrange was a bit throatier. It sounds clean, but really, it’s not clean at the same time. Especially his tone in the late ’70s. There is something about running that Fender Twin Reverb through the McIntosh that would just completely blow out the tone in a really interesting way.”
Garcia colored his tone with off-the-shelf effects. This was, after all, long before the days of boutique pedals. By 1978 and beyond, you’d hear him playing through an MXR Distortion+, an MXR Analog Delay, and an MXR Phase 100. He often used auto wahs, preferring the Musitronics Mu-Tron envelope filter as well as a Mu-Tron Octave Divider and a Mu-Tron combination volume and wah pedal.
When I asked Jeff Mattson, Bella Rayne, and Tom Hamilton Jr. exactly how orthodox they are about using the kind of gear that Garcia did, I got three different answers.
Mattson tells me that because Dark Star Orchestra is doing something very specific, he really has to tailor his sound as carefully to Garcia’s as he can. “Some folks get too hung up on small things, like what kind of cable to use and things like that, and I don’t go that far. But it’s important for Dark Star Orchestra to get Jerry’s sound right because we are covering different eras and different shows. In 2022, for example, we went to Europe and recreated shows from the Dead’s famous Europe ’72 tour, so you have to pay close attention to what kind of gear they were using to do that right.”
Hamilton works differently. He’s always preferred a higher-gain signal than Garcia ever did, landing in more of a British or heavy metal tone. (Randy Rhoads was a big influence.) “I’ve always approached it like, ‘What’s the new information we can put into this thing?’” he says. “Not just recreate but pushing in a forward direction. And anytime I’ve played with the guys who played with Garcia back in the day, they always said to me, ‘You’re here because you’re here. Don’t try and do what we did back in 1978 or do it because Garcia did it that way.’ They’ve always encouraged me to be myself.”
Bella Rayne is just wrapping her head around what it really means to try to sound like Garcia. “Besides Jerry, I’m influenced by guitarists like Dickey Betts and Derek Trucks, so my tone tends to be a bit heavier and bluesy,” she explains. “I’m generally running a Stratocaster through a Fender Twin Reverb. But recently, I was doing a show, and a buddy of mine set up a Jerry rig for me, and that was so cool: JBL speakers, McIntosh head, the whole setup. I had never played through one. I didn’t know what the hype was all about. I plugged in, and it was just amazing; there was such a snap, and I was really commanding the band. I can see myself keeping my current rig but adding a Dead-rig to experiment. But honestly, anything is fine; I am not picky. I just want to play the best that I can.”
Brent Mason is, of course, on of the most recorded guitarists in history, who helped define the sound of most ’90s country superstars. So, whether you know it or not, you’ve likely heard Mason’s playing.
Professional transcriber Levi Clay has done the deepest of dives into Brent Mason’s hotshot licks. At one point, he undertook the massive project of transcribing and sharing one of Mason’s solos every day for 85 or so days. Mason is, of course, on of the most recorded guitarists in history, who helped define the sound of most ’90s country superstars. So, whether you know it or not, you’ve likely heard Mason’s playing. Levi shares the insight he gleaned from digging deep, and he tells us what it was like when they shared a stage last year. Plus, Levi plays us some great examples of Mason’s playing.
PRS Guitars today launched five new three-pickup, 22-fret models across the S2 and SE series. The S2 Series release includes the S2 Special Semi-Hollow and S2 Studio, while the SE Series welcomes the SE Special Semi-Hollow, SE Studio, and SE Studio Standard.
“The distinctive pickup configurations of these five guitars deliver a versatile tonal platform, whether you’re exploring subtle textures or pushing the envelope. The deep dive into our Narrowfield technology is obvious with this launch. With both the S2 models made in our Maryland factory and the SE models made in Indonesia, our goal has been to create guitars that will inspire you and spark creativity, all at an exceptional value,” said PRS Guitars COO, Jack Higginbotham.
S2 Special Semi-Hollow
The PRS S2 Special Semi-Hollow features a pair of 58/15 LT humbuckers in the bass and treble positions and a PRS Narrowfield in the middle. A 5-way blade switch and two mini-toggles allow players to tap the humbuckers, creating twelve distinct pickup combinations for sonic exploration. The carved maple top and mahogany back encompass a semi-hollow body that adds a natural airiness and depth to the guitar’s tone while enhancing sustain.
S2 Studio
The PRS S2 Studio delivers a wide range of sonic possibilities through its distinctive single-single-hum configuration. Featuring two proprietary PRS Narrowfield pickups in the bass and middle positions and a 58/15 LT humbucker in the treble position, the S2 Studio offers a palette of sounds from single-coil clarity to vocal humbucker tones. This model also has a 5-way blade switch and push/pull tone control.
SE Special Semi-Hollow
The PRS SE Special Semi-Hollow is designed with the versatility of a hum/“single”/hum setup, bringing PRS’s Narrowfield DD pickup design to the SE Series in a classic maple-top guitar. The semi-hollow construction also enhances sustain and resonance, while the f-hole adds a classic aesthetic. The coil-tap switching system unlocks a wide range of tones through a pair of 58/15 LT “S” pickups in the bass and treble positions and a PRS Narrowfield DD “S” in the middle.
SE Studio
The PRS SE Studio’s “single”/”single”/hum pickup configuration provides a wide range of tonal options. This combination of PRS Narrowfield DD “S” bass and middle pickups with a PRS 58/15 LT “S” treble humbucker offers humbucking warmth, single-coil sparkle, and everything in between. The 5-way blade switch and push/pull tone control further enhance its versatility.
SE Studio Standard
The only bolt-on neck in this release group, the PRS SE Studio Standard brings the tone, playability, and versatility of the Studio model to the SE Series and into an all-mahogany design with a vintage-style pickguard aesthetic. At the heart of the SE Studio Standard is its versatile trio of pickups: an 58/15 LT “S” humbucker in the treble position with two Narrowfield DD “S” pickups in the middle and bass positions. The 5-way blade switch and push/pull tone control allow for an array of pickup configurations.
PRS Guitars continues its schedule of launching new products each month in 2025. Stay tuned to see new gear and 40th Anniversary limited-edition guitars throughout the year.