Bursts, Benders, and Js, oh my! A pioneer of the new Nashville sound spends a whopping 90 minutes showing off the gear his crew has amassed since our last get-together.
Back in the fall of 2015 PG traveled south to the Tivoli Theatre in Chattanooga, Tennessee, to catch up with Jason Isbell, guitarist Sadler Vaden, and bassist Jimbo Hart. At the time, the band gave us so much time and so much gusto about their piles of gear, the resulting Rundown became the longest ever at 65 minutes.
Fast forward four years and now Perry Bean finds himself onstage, surrounded by even more gear, at the historic Ryman Auditorium in the middle of Isbell’s annual October run. This year saw the Alabama native and his bandmates sell out seven consecutive shows at the Mother Church. And before the 4th night, we basically filmed a feature film spotlighting all the new inspiring additions to their arsenal and how it all further propels the 400 Unit’s sonic quest.
While Jason Isbell has a treasure trove of calendar-worthy guitars, we have to start with this 1959 Gibson Les Paul. The showstopper earned its nickname “Redeye” for the original red-mark finish near the pickup selector being preserved by the guitar’s price tag hanging down in a music store’s front window protecting it from the UV rays. The ’burst was owned and played for many years by Lynyrd Skynyrd guitarist/bassist (and creator of the “Sweet Home Alabama” riff) Ed King. After King’s passing in August 2018, his family put a few of his classic guitars, including this iconic instrument, up for sale at Carter Vintage in Nashville.
At the request of the Carters’, Isbell was asked to come into the store to demo the guitars to help generate interest in the sale of Ed King’s collection. As Isbell retells the fateful meeting between he and Redeye, he felt “tricked” because they had left Jason alone with the ’burst, so of course he had to play. And after playing it … he had to have it.
He left Carter Vintage daydreaming about the Les Paul. He lost sleep that night fixated on how it sounded and played. So, the next day he called his accountant and she said you can’t have that guitar. Next, he called his management team, and he jokingly told them he would play any weird birthday parties as long as they weren’t for terrorists or bad people just so he could afford the guitar.
Isbell swapped out the tuners (although still functioning great) and upgraded with a period-correct set to preserve the sanctity of the instrument by saving the originals from harm. The tailpiece has been subbed out for a new Joe Glaser model that allows Isbell to top wrap the strings without worry of dinging the top. And the last notable change is that King had a partial refret up to the 12th position.
Under the metal covers rest a double-white humbucker (bridge) and zebra (neck). Isbell believes the zebra is overwound about 600 turns, but over the last 60 years, it’s lost some of its magnetism making it more balanced and creating an impeccable middle-position tone.
All of Jason’s guitars take Ernie Ball Slinkys gauged .010–.046, he hammers away with Dunlop Tortex 1.14 mm picks, and gets slippery with MagSlide Magnesium Guitar Slides.
“There’s more difference in the price than there is in the tone,” says Jason Isbell, when referring to this “Redeye” copy recently built by the Gibson Custom Shop.
“For about a week, this was my coolest Les Paul,” says Jason Isbell about his 1953 Gibson goldtop. The aforementioned Ed King-owned ’burst would overshadow any guitar in most collections, but this gem actually had the Bigsby and tailpiece put on by longtime Neil Young tech Larry Cragg. He bought the guitar around last Christmas from TR Crandall Guitars.
Since our last Rundown, Isbell has been lucky enough to receive a signature Martin D-18. The goal for this collaboration was to make the loudest-possible dreadnought. The model boasts a pre-aged Vintage Tone System (VTS) Adirondack spruce top, mahogany back and sides, and rear-shifted scalloped bracing which produce more natural volume and a clear powerful tone. It uses hide glue for a stronger resonance and it comes with the pickguard in the case because Martin’s Fred Greene discovered that it could decrease the guitar’s volume by 5 dB. His flattops take Martin SP Medium (.013–056) strings.
If you see the Castle Creek Guitars Dobrato come out, get your handkerchief out because it’s time for “If We Were Vampires.” The Colorado-based company claims the Dobrato to be the world’s first acoustic-electric, round-neck resophonic guitar to include the unique B-bender vibrato. With their proprietary vibrato arm, you can pull it sideways to move the B string to a C#. It has high-quality cones, biscuit, and a Fishman PRO-RES-BIS pickup system.
If you watched our Rundown with Nashville producer Dave Cobb (Isbell, Chris Stapleton, Sturgill Simpson), you may recognize this 1959 Gretsch Jet Firebird. In that episode, Cobb says that Isbell bonded so much with this Jet during the recording of Southeastern and Something More Than Free that he was the rightful owner of it because of how he made it sound. Then Cobb jokes that he told Isbell he would give him the guitar if he sold “x” amount of records. And now while Jason doesn’t confirm or deny if that number was hit, this is the same ’59 Jet that once belonged to Cobb.
Here’s Jason Isbell’s sunburst 1960 Fender Strat. That night at the show he used it quite a bit including during the old 400 Unit tune “Overseas.”
This candy-apple red Tele came out of the Fender factory in April 1965. To Jason’s knowledge, because it’s a transition instrument, the only thing that isn’t a true ’64 on the guitar is the pearloid inlays as opposed to clay.
Isbell tweaked this 2014 Fender Custom Shop ’60 Tele Custom (which was built by Master Builder Paul Waller) by adding a black pickguard and a Twisted Tele pickup in the neck position. This and the next two slides (the 1961 ES-335 and the Tom Stadler-built “Cooder-caster”) are the only guitars leftover from the 2015 episode.
This 1961 Gibson ES-335 is the first really old and really awesome guitar that Isbell obtained and is mostly original with a few key upgrades. Isbell had famed Nashville luthier Joe Glaser give the guitar a refret and install a TonePros tailpiece along with new tuners because after years of use the originals started to look like “a dead man’s toe.”
“This guitar will actually get me gigs,” says Isbell. It’s a “Cooder-caster” that was built by Nashville luthier Tom Stadler from Carter Vintage Guitars. The idea behind the guitar came from legendary slide guru Ry Cooder’s main guitar. Stadler salvaged the “gold foil” neck pickup from an old Teisco guitar and held onto to for about a year before Isbell’s wife commissioned the guitar for his birthday. Stadler also installed a Lollar lap steel pickup that’s based on an old Supro model in the bridge position. Based on a recommendation from Blake Mills, Isbell strings this guitar up with flatwound strings.
In the last Rundown, Jason was running two amps (Magnatone Super Fifty-Nine and Sommatone Roaring 40), and now his setup has doubled to include four combos. The first one is this Magnatone Panoramic Stereo 2x10 with pitch-shifting vibrato. It’s loaded with the company’s ceramic speakers.
Next up in his stable of amps is the Fender '64 Custom Deluxe Reverb handwired reissue. He took out the Jensen C12Q speaker and replaced it with a Weber Ferromax.
To keep power consistent and volume manageable (without sacrificing tone), Isbell employs a Weber MiniMass 50-watt Attenuator for each amp. The Magnatone gets two because it has two power amps for the stereo output.
The top pair that work together starts with this ’64 Fender Vibroverb that has been given the “Diaz” mod (named SRV’s tech Cesar Diaz), which means they pulled the preamp tube in the vibrato channel. (For what it’s worth, this mod can be done to the normal channel, too. You just need to pull the V1 preamp instead.) The impact of the mod is summarized best by new PG columnist Jens Mosbergvik (“Silver and Black”) on his Fenderguru site: “the other channel’s tube will be hotter biased and offers more gain. The amp will play louder than before given the same volume knob setting. The stronger signal will push the second gain stage (V4 tube) harder and give you increased sustain, compression and harmonics.” It has a 15" JBL speaker and was a Christmas gift from wife Amanda Shires.
The last of the combos is this 1958 Fender Bassman that Isbell bought at Rudy’s in NYC. He believes it was owned or was in the shop of George Alessandro for years, so it’s in tip-top shape and purrs real nice.
The top shelf of Jason’s rack includes a trio of Fishman Aura units and a J. Rockett Audio Blue Note OD that is used as an EQ pedal for Jason’s neck humbuckers so they are a little more trebly. These are all juiced up by the Voodoo Lab Pedal Power Digital brick.
Next row is home to a silverface Klon Centuar, Origin Effects SlideRIG, and a trio of Analog Man stomps—a King of Tone, Sun Lion (gift from Marc Ford), and a modded Analog Man Small CompROSSor (with an added mix knob). These are brought to life by the Voodoo Lab Pedal Power Iso-5.
And in the last drawer we have an Analog Man ARDX20 Dual Analog Delay, Electro-Harmonix Micro POG, and a quad of Chase Bliss digital powerhouses—Condor, Gravitas, Tonal Recall, and Dark World. All of these pedals are powered by the Voodoo Lab Pedal Power 4x4.
Lastly for Isbell is this Ibanez DML10 Modulation Delay II. The delay function is dialed out and is used as a comb filter with very subtle modulation that mimics a flanger.
Here is the brain behind Isbell’s entire setup that enables him to make several changes with one kick of a button thanks to the RJM Mastermind GT. Other goodies out front include a TC Electronic PolyTune 2 Noir, Chase Bliss Condor, and a Mission Engineering EP-1 Expression Pedal.
A new addition to Sadler Vaden’s vault is this buttescotch, blackguard Tele built by the Fender Custom Shop last year. It’s based on a ’51 Nocaster with a ’60s-style neck profile and Twisted Tele pickups (suggested by Jason).
This is a 1981 Tokai Breezysound T-style outfitted with a classic B-bender.
Here is Sadler Vaden’s 1999 Fender Tele Custom ’72 reissue (MIM) that was upgraded with a Lindy Fralin Split-blade in the bridge and a Fralin P-92 in the neck.
400 Unit guitarist Sadler Vaden has been using this ’05 Gibson SG Standard as his main ride. It's loaded with a Seymour Duncan Pearly Gates humbucker in the bridge, a '59 in the neck, and is strung with Ernie Ball Regular Slinky strings.
This eye-catching Les Paul VOS is a 2015 model from the Gibson Custom Shop that now has OX4 humbuckers that were custom-wound to approximate those found in Pagey’s No. 1.
This 2015 Fender Custom Shop Strat was Sadler’s newest guitar in the 2015 episode. It’s now used for electric material like “Last of My Kind” and always rolls with a Thalia capo in the 4th position.
On the last Rundown Sadler was using a 12-string Dano, but now he’s got a fireglo 360/12 Rickenbacker for the job.
If you’re following along at home, you’ll recognize this from the last Rundown when it was Isbell’s go-to acoustic. Now, this D-18 Authentic 1939 belongs to Sadler and still sees the stage each night.
Sadler’s only semi-hollow 6-string is this 2007 Gibson ES-335 “block” reissue—and at the behest of Isbell (its former owner), Vaden dropped in OX4 PAF-style pickups, a Duesenberg Tremolo system, and is strung with Ernie Ball Regular Slinky strings, too.
Here is Sadler’s newest guitar—a Gibson Acoustic SJ-200 Deluxe.
Like last time, Sadler is still running his 3rd Power British Dream.
And while he’s still using a Vox (last time was a handwired AC30 reissue), he’s now rocking through an all-tube 1965 Pacemaker he bought at Emerald City Guitars.
Sadler’s stomp station has grown and tidied up since our last visit. Now he’s going with an Eventide H9, Line 6 MM4, Strymon BlueSky, Analog Man ARDX20 Dual Analog Delay, Mad Professor Forest Green Compressor, Greer Amps Lightspeed, Analog Man King of Tone, Walrus Audio 385 drive, and a pair of Dunlop foot pedals—535Q Cry Baby and a Dunlop DVP3 Volume Pedal. A Korg Pitchblack tuner keeps everything in check, a 3rd Power A/B box controls the amps, and a Walrus Audio Transit 5 wrangles all the pedals.
And for acoustic purposes, Sadler is using a Fishman Platinum Pro EQ and a Radial ToneBone BigShot I/O.
An unlikely pairing of bassists would be the 400 Unit’s Jimbo Hart and former-Metallica thumper Jason Newsted. However, as odd as this low-end duo may seem, they’ve actually become fast friends after Newsted attended and introduced himself following an Isbell show in Oakland, California. The friendship has blossomed in such a way that Newsted gifted Hart this Sadowsky Will Lee Bass 4-string that is decked out with a flame-maple top and fretboard with abalone inlays, and a Hipshot D Extender that quickly goes down a whole step.
While this head-turning blue bomber is an onstage backup, Hart loves that this Sadowsky Vintage PJ “always works in the studio” so it still consistently feels the love.
Hart is running two Ashdown tube heads that can feel like a herd of oncoming buffalo. He normally prefers to run the 300-watt Classic Tube Magnifier (bottom) but will go for the 100-watt model (top) for a brighter sound.
The Hart and soul of his rig lies in this small box—a handwired Noble DI preamp listed as No. 19.
This Xotic X-Blender sits in the rack and allows Jimbo to intricately control the wet/dry blend in his setup from a night-to-night, room-to-room basis. (You can also see that he’s no longer using wooden picks and now plunks away with some custom plectrums from Dunlop.)
Jimbo’s pedal playground includes a Peterson Strobostomp Classic, a Dunlop DVP3 Volume, a Greer Amps Soma, a Malekko Spring, Walrus Audio Voyager and Janus, an Ampeg Classic Analog Bass Preamp, EBS OctaBass, and everything is controlled by a Walrus Audio Transit 5.
Click below to listen wherever you get your podcasts:
D'Addario XT Strings:https://www.daddario.com/XTRR
- Fender Releases Jason Isbell Signature Telecaster - Premier Guitar ›
- First Look: Fender Jason Isbell Custom Telecaster - Premier Guitar ›
- Jason Isbell & Guitarist Sadler Vaden Rig Rundown [2024] ›
- Discover Jason Isbell and The 400 Unit's Latest Release - Premier Guitar ›
- Unleash Sonic Possibilities with Harvezi Hazze - Premier Guitar ›
This legendary vintage rack unit will inspire you to think about effects with a new perspective.
When guitarists think of effects, we usually jump straight to stompboxes—they’re part of the culture! And besides, footswitches have real benefits when your hands are otherwise occupied. But real-time toggling isn’t always important. In the recording studio, where we’re often crafting sounds for each section of a song individually, there’s little reason to avoid rack gear and its possibilities. Enter the iconic Eventide H3000 (and its massive creative potential).
When it debuted in 1987, the H3000 was marketed as an “intelligent pitch-changer” that could generate stereo harmonies in a user-specified key. This was heady stuff in the ’80s! But while diatonic harmonizing grabbed the headlines, subtler uses of this pitch-shifter cemented its legacy. Patch 231 MICROPITCHSHIFT, for example, is a big reason the H3000 persists in racks everywhere. It’s essentially a pair of very short, single-repeat delays: The left side is pitched slightly up while the right side is pitched slightly down (default is ±9 cents). The resulting tripling/thickening effect has long been a mix-engineer staple for pop vocals, and it’s also my first call when I want a stereo chorus for guitar.
The second-gen H3000S, introduced the following year, cemented the device’s guitar bona fides. Early-adopter Steve Vai was such a proponent of the first edition that Eventide asked him to contribute 48 signature sounds for the new model (patches 700-747). Still-later revisions like the H3000B and H3000D/SE added even more functionality, but these days it’s not too important which model you have. Comprehensive EPROM chips containing every patch from all generations of H3000 (plus the later H3500) are readily available for a modest cost, and are a fairly straightforward install.
In addition to pitch-shifting, there are excellent modulation effects and reverbs (like patch 211 CANYON), plus presets inspired by other classic Eventide boxes, like the patch 513 INSTANT PHASER. A comprehensive accounting of the H3000’s capabilities would be tedious, but suffice to say that even the stock presets get deliciously far afield. There are pitch-shifting reverbs that sound like fever-dream ancestors of Strymon’s “shimmer” effect. There are backwards-guitar simulators, multiple extraterrestrial voices, peculiar foreshadows of the EarthQuaker Devices Arpanoid and Rainbow Machine (check out patch 208 BIZARRMONIZER), and even button-triggered Foley effects that require no input signal (including a siren, helicopter, tank, submarine, ocean waves, thunder, and wind). If you’re ever without your deck of Oblique Strategies cards, the H3000’s singular knob makes a pretty good substitute. (Spin the big wheel and find out what you’ve won!)
“If you’re ever without your deck of Oblique Strategies cards, the H3000’s singular knob makes a pretty good substitute.”
But there’s another, more pedestrian reason I tend to reach for the H3000 and its rackmount relatives in the studio: I like to do certain types of processing after the mic. It’s easy to overlook, but guitar speakers are signal processors in their own right. They roll off high and low end, they distort when pushed, and the cabinets in which they’re mounted introduce resonances. While this type of de facto processing often flatters the guitar itself, it isn’t always advantageous for effects.
Effects loops allow time-based effects to be placed after preamp distortion, but I like to go one further. By miking the amp first and then sending signal to effects in parallel, I can get full bandwidth from the airy reverbs and radical pitched-up effects the H3000 can offer—and I can get it in stereo, printed to its own track, allowing the wet/dry balance to be revisited later, if needed. If a sound needs to be reproduced live, that’s a problem for later. (Something evocative enough can usually be extracted from a pedal-form descendant like the Eventide H90.)
Like most vintage gear, the H3000 has some endearing quirks. Even as it knowingly preserves glitches from earlier Eventide harmonizers (patch 217 DUAL H910s), it betrays its age with a few idiosyncrasies of its own. Extreme pitch-shifting exhibits a lot of aliasing (think: bit-crusher sounds), and the analog Murata filter modules impart a hint of warmth that many plug-in versions don’t quite capture. (They also have a habit of leaking black goo all over the motherboard!) It’s all part of the charm of the unit, beloved by its adherents. (Well, maybe not the leaking goo!)
In 2025, many guitarists won’t be eager to care for what is essentially an expensive, cranky, decades-old computer. Even the excitement of occasional tantalum capacitor explosions is unlikely to win them over! Fortunately, some great software emulations exist—Eventide’s own plugin even models the behavior of the Murata filters. But hardware offers the full hands-on experience, so next time you spot an old H3000 in a rack somewhere—and you’ve got the time—fire it up, wait for the distinctive “click” of its relays, spin the knob, and start digging.
A live editor and browser for customizing Tone Models and presets.
IK Multimedia is pleased to release the TONEX Editor, a free update for TONEX Pedal and TONEX ONE users, available today through the IK Product Manager. This standalone application organizes the hardware library and enables real-time edits to Tone Models and presets with a connected TONEX pedal.
You can access your complete TONEX library, including Tone Models, presets and ToneNET, quickly load favorites to audition, and save to a designated hardware slot on IK hardware pedals. This easy-to-use application simplifies workflow, providing a streamlined experience for preparing TONEX pedals for the stage.
Fine-tune and organize your pedal presets in real time for playing live. Fully compatible with all your previous TONEX library settings and presets. Complete control over all pedal preset parameters, including Global setups. Access all Tone Models/IRs in the hardware memory, computer library, and ToneNET Export/Import entire libraries at once to back up and prepare for gigs Redesigned GUI with adaptive resize saves time and screen space Instantly audition any computer Tone Model or preset through the pedal.
Studio to Stage
Edit any onboard Tone Model or preset while hearing changes instantly through the pedal. Save new settings directly to the pedal, including global setup and performance modes (TONEX ONE), making it easy to fine-tune and customize your sound. The updated editor features a new floating window design for better screen organization and seamless browsing of Tone Models, amps, cabs, custom IRs and VIR. You can directly access Tone Models and IRs stored in the hardware memory and computer library, streamlining workflow.
A straightforward drop-down menu provides quick access to hardware-stored Tone Models conveniently sorted by type and character. Additionally, the editor offers complete control over all key parameters, including FX, Tone Model Amps, Tone Model Cabs/IR/VIR, and tempo and global setup options, delivering comprehensive, real-time control over all settings.
A Seamless Ecosystem of Tones
TONEX Editor automatically syncs with the entire TONEX user library within the Librarian tab. It provides quick access to all Tone Models, presets and ToneNET, with advanced filtering and folder organization for easy navigation. At the same time, a dedicated auto-load button lets you preview any Tone Model or preset in a designated hardware slot before committing changes.This streamlined workflow ensures quick edits, precise adjustments and the ultimate flexibility in sculpting your tone.
Get Started Today
TONEX Editor is included with TONEX 1.9.0, which was released today. Download or update the TONEX Mac/PC software from the IK Product Manager to install it. Then, launch TONEX Editor from your applications folder or Explorer.
For more information and videos about TONEX Editor, TONEX Pedal, TONEX ONE, and TONEX Cab, visit:
www.ikmultimedia.com/tonexeditor
The luthier’s stash.
There is more to a guitar than just the details.
A guitar is not simply a collection of wood, wire, and metal—it is an act of faith. Faith that a slab of lumber can be coaxed to sing, and that magnets and copper wire can capture something as expansive as human emotion. While it’s comforting to think that tone can be calculated like a tax return, the truth is far messier. A guitar is a living argument between its components—an uneasy alliance of materials and craftsmanship. When it works, it’s glorious.
The Uncooperative Nature of Wood
For me it all starts with the wood. Not just the species, but the piece. Despite what spec sheets and tonewood debates would have you believe, no two boards are the same. One piece of ash might have a bright, airy ring, while another from the same tree might sound like it spent a hard winter in a muddy ditch.
Builders know this, which is why you’ll occasionally catch one tapping on a rough blank, head cocked like a bird listening. They’re not crazy. They’re hunting for a lively, responsive quality that makes the wood feel awake in your hands. But wood is less than half the battle. So many guitarists make the mistake of buying the lumber instead of the luthier.
Pickups: Magnetic Hopes and Dreams
The engine of the guitar, pickups are the part that allegedly defines the electric guitar’s voice. Sure, swapping pickups will alter the tonality, to use a color metaphor, but they can only translate what’s already there, and there’s little percentage in trying to wake the dead. Yet, pickups do matter. A PAF-style might offer more harmonic complexity, or an overwound single-coil may bring some extra snarl, but here’s the thing: Two pickups made to the same specs can still sound different. The wire tension, the winding pattern, or even the temperature on the assembly line that day all add tiny variables that the spec sheet doesn’t mention. Don’t even get me started about the unrepeatability of “hand-scatter winding,” unless you’re a compulsive gambler.
“One piece of ash might have a bright, airy ring, while another from the same tree might sound like it spent a hard winter in a muddy ditch.”
Wires, Caps, and Wishful Thinking
Inside the control cavity, the pots and capacitors await, quietly shaping your tone whether you notice them or not. A potentiometer swap can make your volume taper feel like an on/off switch or smooth as an aged Tennessee whiskey. A capacitor change can make or break the tone control’s usefulness. It’s subtle, but noticeable. The kind of detail that sends people down the rabbit hole of swapping $3 capacitors for $50 “vintage-spec” caps, just to see if they can “feel” the mojo of the 1950s.
Hardware: The Unsung Saboteur
Bridges, nuts, tuners, and tailpieces are occasionally credited for their sonic contributions, but they’re quietly running the show. A steel block reflects and resonates differently than a die-cast zinc or aluminum bridge. Sloppy threads on bridge studs can weigh in, just as plate-style bridges can couple firmly to the body. Tuning machines can influence not just tuning stability, but their weight can alter the way the headstock itself vibrates.
It’s All Connected
Then there’s the neck joint—the place where sustain goes to die. A tight neck pocket allows the energy to transfer efficiently. A sloppy fit? Some credit it for creating the infamous cluck and twang of Fender guitars, so pick your poison. One of the most important specs is scale length. A longer scale not only creates more string tension, it also requires the frets to be further apart. This changes the feel and the sound. A shorter scale seems to diminish bright overtones, accentuating the lows and mids. Scale length has a definite effect on where the neck joins the body and the position of the bridge, where compromises must be made in a guitar’s overall design. There are so many choices, and just as many opportunities to miss the mark. It’s like driving without a map unless you’ve been there before.
Alchemy, Not Arithmetic
At the end of the day, a guitar’s greatness doesn’t come from its spec sheet. It’s not about the wood species or the coil-wire gauge. It’s about how it all conspires to either soar or sink. Two guitars, built to identical specs, can feel like long-lost soulmates or total strangers. All of these factors are why mix-and-match mods are a long game that can eventually pay off. But that’s the mystery of it. You can’t build magic from a parts list. You can’t buy mojo by the pound. A guitar is more than the sum of its parts—it’s a sometimes unpredictable collaboration of materials, choices, and human touch. And sometimes, whether in the hands of an experienced builder or a dedicated tinkerer, it just works.
Two Iconic Titans of Rock & Metal Join Forces for a Can’t-Miss North American Trek
Tickets Available Starting Wednesday, April 16 with Artist Presales
General On Sale Begins Friday, April 18 at 10AM Local on LiveNation.com
This fall, shock rock legend Alice Cooper and heavy metal trailblazers Judas Priest will share the stage for an epic co-headlining tour across North America. Produced by Live Nation, the 22-city run kicks off September 16 at Mississippi Coast Coliseum in Biloxi, MS, and stops in Toronto, Phoenix, Los Angeles, and more before wrapping October 26 at The Cynthia Woods Mitchell Pavilion in The Woodlands, TX.
Coming off the second leg of their Invincible Shield Tour and the release of their celebrated 19th studio album, Judas Priest remains a dominant force in metal. Meanwhile, Alice Cooper, the godfather of theatrical rock, wraps up his "Too Close For Comfort" tour this summer, promoting his most recent "Road" album, and will have an as-yet-unnamed all-new show for this tour. Corrosion of Conformity will join as support on select dates.
Tickets will be available starting Wednesday, April 16 at 10AM local time with Artist Presales. Additional presales will run throughout the week ahead of the general onsale beginning Friday, April 18 at 10AM local time at LiveNation.comTOUR DATES:
Tue Sep 16 – Biloxi, MS – Mississippi Coast Coliseum
Thu Sep 18 – Alpharetta, GA – Ameris Bank Amphitheatre*
Sat Sep 20 – Charlotte, NC – PNC Music Pavilion
Sun Sep 21 – Franklin, TN – FirstBank Amphitheater
Wed Sep 24 – Virginia Beach, VA – Veterans United Home Loans Amphitheater
Fri Sep 26 – Holmdel, NJ – PNC Bank Arts Center
Sat Sep 27 – Saratoga Springs, NY – Broadview Stage at SPAC
Mon Sep 29 – Toronto, ON – Budweiser Stage
Wed Oct 01 – Burgettstown, PA – The Pavilion at Star Lake
Thu Oct 02 – Clarkston, MI – Pine Knob Music Theatre
Sat Oct 04 – Cincinnati, OH – Riverbend Music Center
Sun Oct 05 – Tinley Park, IL – Credit Union 1 Amphitheatre
Fri Oct 10 – Colorado Springs, CO – Broadmoor World Arena
Sun Oct 12 – Salt Lake City, UT – Utah First Credit Union Amphitheatre
Tue Oct 14 – Mountain View, CA – Shoreline Amphitheatre
Wed Oct 15 – Wheatland, CA – Toyota Amphitheatre
Sat Oct 18 – Chula Vista, CA – North Island Credit Union Amphitheatre
Sun Oct 19 – Los Angeles, CA – Kia Forum
Wed Oct 22 – Phoenix, AZ – Talking Stick Resort Amphitheatre
Thu Oct 23 – Albuquerque, NM – Isleta Amphitheater
Sat Oct 25 – Austin, TX – Germania Insurance Amphitheater
Sun Oct 26 – Houston, TX – The Cynthia Woods Mitchell Pavilion
*Without support from Corrosion of Conformity