The story of 1960 Gibson Les Paul 0 8145—a ’burst with a nameplate and, now, a reputation.
These days it’s difficult to imagine any vintage Gibson Les Paul being a tough sell, but there was a time when 1960 ’bursts were considered less desirable than the ’58s and ’59s of legend—even though Clapton played a ’60 cherry sunburst in his Bluesbreakers days. Such was the case in the mid 1990s, when the family of a local musician who was the original owner of one of these guitars walked into Rumble Seat Music’s original Ithaca, New York, store with this column’s featured instrument.
Les Paul 0 8145 is a typical 1960 ’burst in most ways. A vibrant cherry color is prominent in the finish—which is a result of a change in dyes Gibson made when owners complained of their new ’58 and ’59 model guitars fading in ultraviolet light—and the neck is thinner than the late-’50s models, similar to what you’d find on the SG-body-style guitars that debuted not long after this 6-string left Kalamazoo.
This close-up of the guitar’s body shows it in excellent condition, and the sound generated by its humbuckers is terrific.
The maple top is hardly the most figured, yet neither is it plain. But one thing certainly jumps out on this guitar: The original owner applied a name plate on the top for all the world to know it belonged to “Johnny B”! Perhaps for this reason, or perhaps because Rumble Seat was never short on amazing guitars on display to compete for attention, the guitar we named Johnny B. hung on the wall for close to eight months.
Eliot Michael, Rumble Seat’s owner, insisted that what Johnny B. lacked in flame was made up for in spades via its monstrous sound. The two original PAF humbuckers are incredible. It’s now common knowledge that many of the best sounding ’bursts do come from the later run in 1960, but it took some convincing for one of my friends and good customers to finally plug Johnny B. in to hear it for himself. Upon doing so, he immediately declared it “the best sounding guitar I’ve ever heard.” And Johnny B. left the shop for a new home.
The back of the guitar also shows TLC—as well as its classic mahogany wood grain.
As tends to happen, the guitar eventually found its way back to Rumble Seat Music, after we moved the store to Nashville, Tennessee. Another friend and customer agreed with that assessment of its sound. His name is Joe Bonamassa. Johnny B. went to live with Joe B., where it took on a new chapter of life on the road and in the studio for several years.
Joe wielded this truly exceptional-sounding guitar in many shows across the U.S. You may have seen it onstage. While some Les Pauls are known for their sweet sound, Johnny B. wants to rock. This is one of the most aggressive, raunchy, and downright rude-sounding Les Paul Standards out there, which seems appropriate for an instrument sharing a name with a Chuck Berry song. It doesn’t get much more rock ’n’ roll than that!
As I mentioned earlier, guitars we sell have a habit of finding their way back to our store, and so it goes with Johnny B.–now returned to our walls after some serious adventures. Typically, good condition 1960 Les Pauls carry tags in six figures, and this one is no exception at $278,000. That’s within the same current range for ’58s and ’59s, since players and collectors have gotten hip to the virtues of 1960 models. And although it was initially overlooked, Johnny B. has earned its place as one of the most recognizable ’bursts around.
- Gibson Vs. Epiphone—Are We The Ones Being Elitist? ›
- The Legend of Slash's Appetite for Destruction Les Paul - Premier ... ›
- Epiphone Joe Bonamassa 1960 Les Paul Standard “Norm Burst ... ›
Looking for more great gear for the guitar player in your life (yourself included!)? Check out this year's Holiday Gear Finds!
D'Addario XPND Pedalboard
DR-05X Stereo Handheld Recorder
Wampler Pedals Ratsbane
Created in collaboration with legendary guitarist George Lynch of Dokken and Lynch Mob fame, the Mr.Scary Mod adds an adjustable tube gain stage and an onboard Deep control, which together are designed to enable an amp to have increased sustain while still retaining note definition and dynamics.
LegendaryTones, LLC today announced production availability of its new Mr. Scary Mod, a 100% pure tube module designed to instantly and easily expand the capabilities of many classic amplifiers with additional gain and tone shaping. Created in collaboration with legendary guitarist George Lynch of Dokken and Lynch Mob fame, the Mr.Scary Mod adds an adjustable tube gain stage and an onboard Deep control, which together are designed to enable an amp to have increased sustain while still retaining note definition and dynamics.
Originally released as the Lynch Mod in February 2021, the updated Mr. Scary Mod features the same core circuit as the Lynch Mod but is now equipped with a revised tube mix combo per George’s preference as well as a facelift in a newly redesigned electro-galvanized steel enclosure. As with the Lynch Mod, each run will be limited and the first run in Pumpkin Orange with Black hardware is limited to just 150 pieces worldwide.
The Mr. Scary Mod adds an adjustable tube gain stage on top of the cathode follower position, keeping note definition and articulation while further increasing sustain. Each Mr. Scary mod is meticulously built by hand in the USA, one at a time, and tuned using high-grade components. Equipped with a single ECC81 (12AT7) in the first position and ECC83 (12AX7) in the second, the Mr. Scary Mod can clean up beautifully when rolling down your guitar’s volume, and still adds scorching gain when you roll it back up. This is a gain stage that’s been tuned and approved by the ears of the maestro George Lynch himself.
“The Mr. Scary Mod excels with dynamics and is incredibly touch-responsive, allowing me to shift from playing clear, lightly compressed cleans to full-out aggressive sustain and distortion –and control it all simply by varying my guitar’s volume control and picking,” said GeorgeLynch. “In many ways, it’s an old-school approach, but it’s also so much more natural and expressive in addition to being musically fulfilling when you can play both the guitar and amp dynamically together this way.”
The Mr. Scary Mod installs in minutes, is safe and effective to use, and requires no special tools or re-biasing of the amplifier. Simply insert the module into the cathode follower preamp position of compatible amplifiers (includes Marshall 2203/2204/1959/1987 circuits) and
immediately get the benefit of enjoying a hot-rodded amp that delivers all the pure harmonic character that comes with an added pure tube gain stage. The handmade in the USA Mr. Scary Mod is now available to order for $319.
For more information, please visit legendarytones.com.
October Audio has miniaturized their NVMBR Gain pedal to create two mini versions of this beautifully organic-sounding circuit – including an always-on gain device.
The NVMBR Gain is a nonlinear amp that transitions gracefully from clean boost to overdriven tones. Volume increases from just over unity to about 10db before soft-clipping drive appears for another 5db of boost. Its extraordinary ease of use is matched by outstanding versatility: you can use it as a clean boost, push a stubborn amp into overdrive or create a just-breaking-up sound at any amp volume.
October Audio’s new family of mini NVMBR Gain pedals includes a switchable version that allows you to bypass the effect: one option features brand logo pedal graphics, while the other sports a fun “Witch Finger” graphic with a Davies knob as the“fingernail”.
The second version in the new lineup is an always-on device featuring the Witch Finger graphic and Davies knob, with the same NVMBR Gain circuit that lies at the core of the switchable version.
- Knob controls gain and clipping simultaneously
- Stunning silver hammertone finish
- Switchable versions are true-bypass, available with classic or witch finger graphics
- Authentic Davies knobs, including the “fingernail”
- 9V center negative power supply required
- Dimensions: 3.63 x 1.50 x 1.88 in
Witch Finger (always on NVMBR Gain) demo
All October Audio pedals are assembled in Richmond, VA, and available for purchase directly through the online shop. Street price is $109 for NVMBR Gain footswitch versions and $89 for the always-on device.
For more information, please visit octoberaudio.com.