Stoner metal, desert rock, trippy psychedelia, and swampy blues swirl with just three guitars, a bastardized Rick, and custom-built, beastly stacks.
Expanding, evolving, exploring, and enchanting are all applicable when describing the orbit of All Them Witches. Since their 2016 Rig Rundown, the quartet have continued pursuing their sonic mission, unbound by anything but regeneration. Their never-ending musical mutation has yielded three more individualistic, intrepid releases since our last check-in.
Sleeping Through the War, in 2017, explored more purposeful, mystical songcraft cloaked in hypnotic, rambunctious rock. For 2018’s ATW, the band’s IV-like retreat (substitute Headley Grange for a Tennessee cabin) extracted a doomier, more chaotic side A equally matched by a side B that’s a psychedelic painkiller. And 2020’s Nothing as the Ideal shows the temporary power trio (drummer Robby Staebler completes the line-up) striking a levitating balance within a menacing, mortar of metal that binds and anchors their emotive, effervescent excursions. (Drop the needle on closer “Rats in Ruin” and let it wash over you.)
Just before their sold-out show at Nashville’s historic Ryman Auditorium (on Halloween, no less), Witches guitarist Ben McLeod and bassist/vocalist Charles Michael Parks Jr. welcomed PG’s Chris Kies onstage to re-chronicle their setups. The resulting conversation covers their modified war horses, deciphers their esoteric stacks, and reveals the secrets of the “doom broom.” Plus, we get hip to new builder Elad Shapiro of Dale Amps.
[Brought to you by D’Addario 360 Rechargeable Tuner: https://www.daddario.com/NexxusRR]
McLeod’s Monster
Starting off the Rundown, just like the 2016 episode, we have Ben’s beloved 2010 Gibson Les Paul Traditional. He’s done several mods to make this instrument a third appendage. McLeod had removed the stock speed knobs, opting for witch-hats (of course). However, he’s a big proponent of precise volume manipulation, so he put back the speed knobs for the two volume controls. He replaced the plastic nut with one made of bone. He says it not only helps with intonation but gives the guitar a silkier, smoother sound. The stock bridge Classic ’57 humbucker was swapped out for a DiMarzio Super Distortion. And, although it was mentioned last time, it’s worth noting that the pickguard was removed because McLeod is a big fan of Duane Allman and he didn’t feel like covering the full burst.
All the guitars take D'Addario NYXLs (.010–.046) and are typically tuned to D standard or drop C (C-G-C-F-A-D). And all his guitar maintenance is handled by Eastside Music Supply tech and PG contributor Derek Ness, who authored our 2019 edition of No-Brainer Mods.
Knaggs Nailed It
When a custom builder like Joe Knaggs comes calling as a fan, you answer. The Maryland-based luthier wanted to send McLeod a few guitars and the 6-stringing Witch said, “absolutely!” The SG-ish Honga is his favorite. “This guitar has an ungodly amount of midrange, and it is so awesome,” gushes McLeod. “It’s an amazingly, well-built guitar.” The set-neck, double-cutaway axe has a 24.75" scale length and came with Bare Knuckle Mules. The lone mod on this guitar (again done by Derek Ness) was swapping the pickup selector from below (near the control knobs) to up top, like Les Pauls.
Roy Marks the Spot
“I’m obsessed with Roy Buchanan,” admits McLeod. “So, I had to have a guitar that looked like his, with a butterscotch blonde finish and black pickguard.” This bombshell is a Fender American Vintage ’52 Telecaster. Ben reversed the control plate and put the volume knob ahead of the tone control, so he had easier access to the volume knob for county-ish, pedal-steel bends. He also dropped in a set of Fralin Blues Special Tele single-coils because he heard that his current favorite picker, Kenny Vaughan, loves them. For ATW, it’s primarily a safety net, but when he’s home he plays this T the most. (And for a taste of how it sounds, spin Ben’s surf-western side project El Castillo.)
Slippery Slides
For songs like “Rats in Ruin,” McLeod will grab a Dunlop Heavy Wall Large Glass Slide (213), and he attacks the strings with Dunlop Tortex .73 mm picks.
Fourth-Grade Fender
This is still the same Fender Twin Reverb reissue Ben was using in 2016, which he’s been blasting through since fourth grade, when he got it for Christmas. He’s had it outfitted with a master volume knob (far right control) so he can dial back its roar at home. (He leaves it wide open when onstage.) Another alteration was removing the pair of Jensens for a couple of alnico Warehouse Guitar Speakers 50W Blackhawks.
The Gain Monster
This mysterious box of rock is a very angry interpretation of a 50W JCM800. Built by Nashvillian Elad Shapiro (Dale Amps is the company), it features a Hiwatt output transformer and Mullard EL34s. A 2x12 open-back Dale cab is loaded with a set of Warehouse Guitar Speakers ET65s. In flight, he uses either the Twin Reverb (clean) or the Dale (heavy). (During the Rundown, Ben alludes to a forthcoming 100W version that will be used on their winter run and into 2022.)
For those who can’t read Hebrew, the controls are as follows: (top, from left) preamp gain, master volume, and presence, while below you have treble, mids, and bass.
Lucky for us, we had the amp builder himself on hand, and here’s what he said about his creation: “It’s a 4-stage, high-gain amplifier with three EL34s in the output, three 12AX7s in the preamp, and it has a Hiwatt Partridge output transformer. I like to use them because they’re very open and chime-y sounding. The biggest difference between this and a JCM800 is that it doesn’t have a cold-clipper stage—how the tube is biased causes it to do something unpleasing to my ear. And it cleans up real nice when you ease off the volume.”
6-pack and a Wah
As diverse as the band’s sound can be, Ben keeps his stomps relatively straightforward. His sweet baby Boss BD-2 Blues Driver still finds a home on his board. The rest of his colors come from fresh friends: a duo each of Electro-Harmonix (Holy Grail and Deluxe Memory Man 1100-TT) and MXR (Carbon Copy and Phaser 90) boxes, and a Stomp Under Foot La Scatola Nera. This pedal was a result of a request from Ben to SUF’s Matthew Pasquerella “to have a new and different fuzz from his Alabaster pedal, and add an octave.” Off to the right he has a Dunlop Cry Baby 95Q wah that replaced his Vox V847 Wah because he prefers its wide sweep and not having to engage the circuit, thanks to its auto-return switching. The Radial BigShot ABY True Bypass Switcher controls the amps, while the TC Electronic PolyTune 3 Mini keeps his guitars in check.
In our last Rundown, we picked our jaw off the floor and left scratching our head when first encountering bassist Charles Michael Parks, Jr. amputated 1972 Rickenbacker (left). At that time, he used the bewildering 4001 most of the night. The only sub happened when going for his 1966 Rickenbacker 450/12 for Dying Surfer Meets His Maker songs Call Me a Star” and “Talisman.” As the story went, the guy he bought it from was left-handed, and he chopped off the upper bout, slashed off some of the headstock, and flipped it around to play lefty. Parks got the bass super cheap, had set it up to play right-handed, reworked the electronics, shaved the bridge and moved it back, and then outfitted it for a proper stereo jack. It usually has D’Addario Half Round (.050–.105) strings. And, as Parks puts it, “it’s a battle axe. If being dragged behind a truck had a sound, it’d be this.”
Since then, he had budding luthier and tech whiz Derek Ness build him a more dependable, road-worthy replica of the oddball (right). Besides the original’s brighter toaster pickups and its frayed look, the biggest difference is that the Ness Custom model has a Hipshot BT3 Bass Xtender detuner.
Daddy Played Bass
This 1962 Fender P bass was bought by Parks’ father in 1965 and was recently gifted to him. His father’s friends were sound engineers and, like the P’s designer, didn’t play the instrument, but they heavily tinkered with its circuitry by putting in a Jazz bass pickup and additional switching. Shortly after purchasing the P, his father smashed the switches and gave it a bizarrely beautiful sound.
The Groove
From all the years of playing it, Parks’ father worked a serious thumbprint just above the J pickup.
SG Me to 69, Please
A week after Woodstock (possibly after seeing Carlos Santana rip on an SG Special), Parks’ father picked up this 1969 Gibson SG Custom (factory built with only two pickups and a Bigsby) at Hazen’s Music Store in Plattsburgh, New York. Again, being the generous father he is, he gifted it to his son.
Twin Towers
Parks’ trusts his tone to Dale, aka Elad, Shapiro, too. The clean amp (right) pumps out 120W and is loosely based on an Ampeg circuit, but uses six 6L6s (instead of KT88s) because Elad prefers “a rounder, thumpier, bluesier sound.” It has an additional midrange control and a robust transformer for a solid DI out (aiming for the Motown gold-standard tone). The left-side head is chasing the thunderous sound of a Sunn Model T. It has an added gain stage and a beefed-up power supply for more voltage, making it the ultimate companion to the doom broom. Both Dale cabinets have a single 15" speaker (below) and a pair of 12s (top). The 1980s Sovtek Mig 100H is just paperweight backup for now.
Parks' Pedal Playground
The lone survivor from our 2016 rundown is Parks’ Red Panda Raster, because of his love for its reverse-delay setting. New arrivals include a Boss DD-200 Digital Delay (used only on “Diamonds”), a Greer Little Samson, MXR FOD (hits the dirty amp), and a Boss RV-5 Digital Reverb. A Radial Twin City Active ABY Switcher controls the amps, a Radial Voco-Loco Effects Switcher colors his vocals, and a Sonic Research ST-300 Turbo Tuner keeps his instruments in line.
- Riff Rundown: All Them Witches' "When God Comes Back" - Premier ... ›
- Hooked: All Them Witches' Ben McLeod on R.E.M.'s Monster ... ›
- Spellbinders: Ben McLeod and Charles Michael Parks, Jr. of All ... ›
- Thomas V Jäger—Monolord’s Dark Prince of the V - Premier Guitar ›
- Wolfmother's Andrew Stockdale Guitar Rig Rundown ›
You watched John Bohlinger build his ultimate Strat, now you can win it! Enter below by March 18, 2025 for your chance to snag the Strat.
Watch the build!
Want to build your own? Use these parts:Licensed Fender Necks and Bodies from StewMac: https://stewmac.sjv.io/POKaaY
Seymour Duncan Hot Chicken Pickups: https://seymour-duncan.sjv.io/APmKK1
Tube Amp Doctor Wiring Kits: https://www.tubeampdoctor.com/en/parts-for-guitars/tad-premium-wiring-kits/for-fender-style-guitars/
AxLabs Tone Claw: https://axlabshardware.com/products/axlabs-tone-claw-locking-spring-claw
AxLabs String Surfer Saddle: https://axlabshardware.com/products/string-surfer-brass-roller-saddles
Ax Labs Strat-Style Switch Tip: https://axlabshardware.com/collections/switch-tips/products/axlabs-5-way-toggle-switch-tips
PureTone Output Jack: https://puretonetechnologies.com/
GraphTech Ratio Tuners: https://graphtech.com/pages/ratio-machine-heads
LeRockskin Selvaggia Strap: https://www.lerockskin.com/shop/selvaggia/
Reunion Blues Expedition Series Gig Bag: https://reunionblues.com/collections/expedition-series
With 350W RMS, AMP TONE control, and custom Celestion speaker, the TONEX is designed to deliver "unmatched realism."
"The next step in its relentless pursuit of tonal perfection for studio and stage. Born from the same innovative drive that introduced the world's most advanced AI-based amp modeling, TONEX Cab ensures that every nuance of modern rigs shines onstage. It sets the new standard for FRFR powered cabinets for authentic amp tones, delivering unmatched realism to TONEX Tone Models or any other professional amp modeler or capture system."
Setting a New Standard
- Professional full-range flat-response (FRFR) powered cab for guitar
- True 350 W RMS / 700 W Peak with audiophile-grade power amps and advanced DSP control
- The most compact 12" power cab on the market, only 28 lbs. (12.7 kg)
- Exclusive AMP TONE control for amp-in-the-room feel and response
- Custom Celestion 12'' guitar speaker and 1'' high-performance compression driver
- 132 dB Max SPL for exceptional punch and clarity on any stage
- Programmable 3-band EQ, custom IR loader with 8 onboard presets and software editor
- Inputs: XLR/1/4" combo jack Main and AUX inputs, MIDI I/O and USB
- Output: XLR output (Pre/Post processing) for FOH or cab linking, GND lift
- Durable wood construction with elegant design and finish
- Swappable grill cloths (sold separately) and integrated tilt-back legs
Finally, Amp-in-the-room Tone and Feel
Thanks to its unique DSP algorithms, TONEX Cab's exclusive AMP TONE control stands apart from any other FRFR in the market today, allowing players to dial in the perfect amount of real amp feel and response to any room or venue.
It achieves this through advanced algorithmic control over the custom high-wattage Celestion 12'' guitar speaker and 1'' high-performance compression driver. Together, they deliver the optimal resonance and sound dispersion players expect from a real cab. Combined with a wood cabinet, this creates a playing experience that feels alive and responsive, where every note blooms and sustains just like a traditional amp.
Ultra-portable and Powerful
TONEX Cab is the most compact 12'' powered cab in its class, leaving extra room in the car to pack two for stereo or to travel lighter. Despite its minimal size, the TONEX Cab delivers true 350 W RMS / 700 W Peak Class-D power. Its unique DSP control provides true-amp sound at any volume, reaching an astonishing 132 dB Max SPL for low-end punch and clarity at any volume. With larger venues, the XLR output can link multiple cabs for even more volume and sound dispersion.
Amplify Any Rig Anywhere
TONEX Cab is the perfect companion for amplifying the tonal richness, dynamics and feel of TONEX Tone Models and other digital amp sims. It adds muscle, articulation, and a rich multi-dimensional sound to make playing live an electrifying and immersive experience.
Its onboard IR loader lets players connect analog preamps directly to the cab or save DSP power by removing the modeler's IR block. Precision drivers also work perfectly with acoustic guitars and other audio instruments, ensuring that time-based effects shine with studio-quality clarity and detail.
Pro-level Features
TONEX Cab offers plug-and-play simplicity with additional pro features for more complex rigs. Features include a 3-band EQ for quickly dialing in your tone to a specific room without editing each preset. You can program the eight memory slots to store both EQ and AMP TONE settings, plus your cabinet IR selection using the onboard controls or the included TONEX Cab Control software. Seamlessly select between memory slots with the onboard PRESET selector or via the built-in MIDI I/O.
On Stage to FOH
TONEX Cab's balanced audio output makes it easy to customize the stage or house sound. It features pre- or post-EQ/IR for cab linking or sending sound to the front-of-house (FOH). The AUX IN allows users to monitor a band mix or play backing tracks. These flexible routing options are ideal for fine-tuning the setup at each gig, big or small.
Stereo and Stacking
With two or more TONEX Cabs, any rig becomes even more versatile. A dual TONEX pedal rig creates a lush, immersive tone with spacious, time-based effects. Players can also build a wet/dry or wet/dry/wet rig to precisely control the direct/FX mix, keeping the core tone intact while letting the wet effects add depth and space. Stack multiple cabs for a massive wall of sound and increased headroom to ensure the tone stays punchy and powerful, no matter the venue size.
Designed to Inspire
The TONEX Cab's Italian design and finish give it a timeless yet modern look under any spotlight. The integrated tilt-back legs let users angle the cab and direct the sound, which is optimal for hearing better in small or dense sound stages. Swappable optional grills (Gold/Silver) make it easy to customize each rig's appearance or keep track of different TONEX Cabs between bandmates or when running stereo rigs.
Bundled Software
TONEX Cab includes a dedicated TONEX Cab Control software application for managing and loading presets and IRs. As part of the TONEX ecosystem, it also includes TONEX SE, the most popular capture software program, with 200 Premium Tone Models, unlimited user downloads via ToneNET and AmpliTube SE for a complete tone-shaping experience.
Pricing and Availability
TONEX Cab is now available for pre-order from the IK online store and IK dealers worldwide at a special pre-order price of $/€699.99 (reg. MSRP $/€799.99*) with a black grill as the default. The optional gold and silver grill cloths are available at a special pre-order price of $/€39.99 (reg. MSRP $/€49.99*). Introductory pricing will end on March 18, with TONEX Cab shipping in April.
*Pricing excluding tax.
For more information, please visit ikmultimedia.com
IK Multimedia TONEX Cab 700-watt 1 x 12-inch Power Guitar Cabinet
TONEX Powered FRFR CabWith over 350 effects models, 120 sampling slots, and a Groove Station with a 480-second looper, this pedal offers unparalleled versatility for guitarists worldwide.
In 2025, MOOER has announced that it will be set to release its latest multi-effects pedal, the GS1000 Intelligent Amp Profiling Processor, an augmented intelligent amp profiling processor. Built on MOOER’s advanced third-generation digital platform, the GS1000 introduces groundbreaking MNRS 2.0 technology, allowing guitarists around the world to emulate their favorite gear with immense precision–specifically, for distortion pedals, preamps, amplifier heads, and cabinets.
With this innovation, guitarists can fully capture the essence of their favorite guitar gear without owning the physical hardware, enabling them to carry their favorite tones wherever they go. Users are even able to use third-party IRs for cabinets of their choice, further enhancing the flexibility of this feature.
It’s unforgettable how much MOOER’s multi-effects pedals have impressed audiences so far, primarily thanks to their robust tone libraries. However, even still, the GS1000 continues to build upon this with storage for up to 120 sampling profiles, along with continued integration with the MOOER Cloud app. Essentially, this cloud integration facilitates infinite upload and download possibilities, giving users access to a global community of shared tones, widely expanding the number of accessible tones. More still, the GS1000’s previously mentioned third-party IR cabinet simulations support up to 2048 sample points, guaranteeing studio-grade tonal accuracy across the board.
Even more impressive for the price is how the GS1000 inherits the dual-chain effects architecture that made previous MOOER gear so versatile, making it suitable for highly complex usage scenarios. With over 350 factory effects models and a Sub-Patch preset grouping mode, the GS1000 makes it far simpler for users to make seamless transitions between tones, all while maintaining effect tails to guarantee seamless transitions. Additionally, the reintroduction of the innovative AI-driven EQ Master builds upon MOOER devices’ previous capabilities, using intelligent adjustments in real-time to match the musical style of players to tones, while still allowing manual tweaks for precise control.
Impressively, the GS1000 also comes packed with a Groove Station module, consisting of a combination of drum machine and looper features–including 56 high-quality drum kits! It offers a 480-second phrase looper with infinite overdubs, automated detection, and synchronization capabilities, resulting in an intuitive platform for solo jamming, composition, and live loop-based performance. Overall, the Groove Station acts as an all-in-one suite for creating full arrangements, without having to depend on additional backing tracks or bandmates.
Visually and functionally, the GS1000 really stands out thanks to its sleek visual design and enhanced user experience. For example, it features a convenient 5-inch high-resolution touchscreen, which is also paired with ambient lighting to add a visually stunning element to the pedal. As a result, the GS1000 is not only designed for convenient touch-based control but also as a standout centerpiece in any guitar rig.
In addition to this touchscreen control system, the GS1000 also provides expanded connectivity options, improving upon the already impressive flexibility of past pedals. Most notably, it supports connectivity with the MOOER F4 wireless footswitch, as well as the ability to control presets via external MIDI devices.
As is expected from MOOER these days, the GS1000 also excels when it comes to routing opportunities, going above and beyond the typical stereo ¼” inputs and outputs that would be expected from other brands. Yes, it still includes such staples, but it also includes an XLRmicrophone input, alongside balanced TRS outputs for long-distance signal clarity. The configurable serial/parallel stereo effects loop enables seamless integration of external effects, and the addition of Bluetooth audio input and MIDI compatibility broadens its wide range of use cases for live and practice-based applications.
Furthermore, the pedal also serves as a professional audio solution thanks to its low-latency 2-in/2-out ASIO USB sound card. Supporting up to 192kHz sampling rates, the GS1000 makes recording and live streaming effortless, as it can easily be used with software DAWs, MOOER’s editing software, as well as the USB-based MIDI control.
The GS1000 will be available in two versions–the standard white edition, which is powered by mains power, and the GS1000 Li version, which introduces a 7.4V 4750mAh lithium battery, chargeable through its power port. With this upgrade, users can enjoy up to six hours of continuous power-free playtime, making it ideal for practicing, busking, and generally performing on the go.
Overall, for fans of MOOER’s previous amp simulation offerings, the GS1000 represents a natural evolution, building on everything that made its predecessors great while introducing cutting-edge features and expanded capabilities. Most importantly, MOOER has promised to continuously update its MOOER 4.0 tonal algorithms on the MOOER Cloud in line with therelease, keeping things fresh for the company’s dedicated user base.
- MNRS 2.0 sampling technology for emulating distortion pedals, preamps, amplifier heads, and cabinets
- Over 350 original factory effects models
- 120 sampling slots with upload/download support via the MOOER Cloud app
- Supports third-party cabinet IR files up to 2048 sample points
- Integrated Groove Station with a drum machine and 480-second looper, featuring infinite overdubs and synchronization capabilities
- 54 high-quality drum kits
- 4 metronome tones
- Tap-tempo control for timing effects
- Advanced AI-driven EQ Master for intelligent tone adjustment based on music styles, with manual customization options
- Built-in high-precision digital tuner
- Quick-access dual-chain effects architecture for seamless creative workflows
- 5-inch high-resolution touchscreen with ambient lighting for enhanced usability
- Four multi-purpose footswitches
- Configurable serial/parallel TRS stereo effects loop for external effects integration
- 6.35mm instrument input and XLR microphone input for expanded connectivity
- Balanced TRS stereo outputs for long-distance signal transmission without quality loss
- Bluetooth audio input functionality for accompaniment playback
- Low-latency ASIO 2-in/2-out USB sound card supporting up to 192kHz sampling rate
- MIDI controller compatibility for managing presets and features
- USB-C port for preset management, USB audio, and USB MIDI functionality
- Supports MOOER F4 wireless footswitch for extended control
- Also available as the GS1000 Li, which features a built-in 7.4V 4750mAh lithium battery, offering up to 6 hours of continuous playtime, chargeable through the power port
The GS1000 will be available from the official distributors and retailers worldwide on January 16th, 2025.
For more information, please visit mooeraudio.com.
Hand-crafted in Petaluma, California, this amp features upgrades while maintaining the original's legendary tone.
The Mesa/Boogie Dual Rectifier Solo Head’s arrival in 1992 was a watershed moment for alternative rock and metal that changed everything; heavy music would never sound the same again, and the Dual Rectifier’s crushing, harmonically rich tone became the most sought-after guitar sound of the era. With a feel as empowering as its sound, the Rectifiers provided an ease of playing that supported and elevated proficiency and was inspirational, rewarding, and addictive.
Its sound and impact on the generation that used it to define what rock music would become were as sweeping as they have been lasting. And it remains arguably the most modeled in today’s digital amp landscape. Now, the 90s Dual Rectifier is back with a vengeance, built in Petaluma, California, by the same artisans who made the originals the most desirable high-gain guitar amplifier of all time.
For more information, please visit mesaboogie.com.