See how dense, complex, serrated post-hardcore pummels and blooms—thanks to some pawnshop prizes, a scratch-and-dent steal, and a unison bass tuning.
Shiner sprouted from the fertile, black-dirt underground rock scene of the Midwest. Cofounded by guitarist/vocalist Allen Epley in 1992, the band toured with contemporaries Sunny Day Real Estate, Chore, Jawbox, Season to Risk, the Jesus Lizard, and Girls Against Boys, recorded with Shellac’s Steve Albini, and released four albums between 1996 and 2001. Injections of new blood for 1997’s Lula Divina (bassist Paul Malinowski) and 2000’s Starless (Josh Newton on keyboards/guitars and Jason Gerken on drums) helped carve fresh ground and broaden their sound.
Shiner’s sweet spot lives among the smoldering soundscapes that brood, blossom, and bolster their cannonball core. The Egg, from 2001, was a crowning achievement—the early career apex of the band’s evolution from noisy dissonance and powder-keg rock to mosaic, prog-like orchestrations that were equally brutal and beautiful. And after nearly two years of touring behind The Egg, the quartet split up in 2003.
Over the next 15 years, Shiner reunited for special one-off appearances and very short tours. And with the help of the internet and streaming services, their low-key, dormant profile was elevated. Finally, in 2020, Shiner came back to the table with Schadenfreude–a shockingly logical evolution from and continuation of The Egg’s sonic flavor. The album has the lyrical earworms, head-nodding rhythms, gut-punch oomph, and palette-cleansing space travel you’d expect from a band that said goodbye with the jewel “The Simple Truth.”
Ahead of Shiner’s show at Nashville’s DIY arts collective, Drkmttr, PG hopped onstage to dissect the current setups of Epley and Malinowski. Epley details how a lunch-break pawnshop visit landed a remarkable Hohner T for under $100. Malinowski reveals the unique tuning (and demonstrates the monkey-grip it requires to play) that allows his setup to charge like a rhino. And both walk us through their practical-but-powerful pedalboards.
(Unfortunately, renowned gearhead, resident of Pudgemont County, and a regular at the Chug Suckle, Josh Newton, was not on this run as he was tech’ing for Kings of Leon. Spotlights’ Mario Quintero played the role of Newton for this batch of shows, and we featured his setup—along with wife/Spotlights bassist Sarah Quintero’s rig—back in 2021.)
Brought to you by D’Addario Nexxus 360 Rechargeable Tuner.
A “Trashy Toy Tele” Becomes the One
If you’ve seen Shiner and Allen Epley, you’ve seen this T-style that’s been to hell and back. Epley’s live staple is a Hohner HG-428N—a Japan-made copy of a Fender Telecaster Deluxe. While Epley has owned the instrument for 30-plus years, he contends that its abuse was dished out prior to scoring this prize at Sol’s Pawn in Kansas City, Kansas. Shiner bassist and extreme bottom feeder Paul Malinowski did the wheeling and dealing and helped Epley land it for under $100. It’s been overhauled several times, to keep it running strong, but Epley feels this one provides a live tone that’s unmatched by anything he owns and adds to Shiner’s sting. He goes with Dunlop Performance+ strings (.011–.050) and is locked into D-standard tuning.
Blacktop Backup
If anything haywire happens to the Hohner, Epley has this Fender Blacktop Jazzmaster HS that was picked from Chris Metcalf, who plays drums in Allen’s other band, the Life and Times. It’s been upgraded with a Staytrem bridge by fellow Shiner bandmate and tech extraordinaire Josh Newton.
Mind the Gap
The solid, stratified sound of Shiner starts with Epley’s stereo setup. The first part of the potent platform is his 1997 Vox AC30 Top Boost reissue that he bought brand new. He loves how it sits in the mix and “fills the gaps in the middle” like double-meat in a club sandwich.
Tommy's Hiwatt?
Surrounding and supplementing the Vox’s mid-focused heft is the above 1971 Hiwatt Custom 100 that chimes in with glassy highs and plenty of low-end heft. He plucked this gem from fellow KC rocker Duane Trower of Season to Risk for $500 cash and a lesser amp. (Epley clearly won that trade.) During the Rundown, he semi-confidently asserts that the head was used for the touring production of the Who’s rock opera Tommy. He uses it with guitar and bass, and it’s been souped-up by turning the normal volume control into a throttle for the pre-gain, giving the amp more grind and growl. The Custom 100 hits a 2x12 cab (procured by Josh Newton) that has a pair of 35-watt speakers.
Allen’s Arsenal
The first two parts of Epley’s pedalboard start on the floor. The TC Helicon Harmony Singer integrates with his guitar—reading whether the chord he’s playing is major or minor—and then accompanies his vocals with a predetermined harmony either above or below his singing key. Next in line on the floor is the Ernie Ball 6166 Mono Volume Pedal. After that is a double dose of dirt compliments of MXR: a Super Badass Distortion and Micro Amp+. Following those is an Electro-Harmonix Micro POG that Epley calls a “kaleidoscope of sound.” A MXR M300 Reverb provides plenty of canyon far and wide, while the Line 6 DL4 spreads Epley’s tone to both amps for stereo delay. A Boss TU-2 Chromatic Tuner keeps his guitars in check and a MXR ISO-Brick M238 powers the pedals.
Paul’s Project P
This P bass started its life as a ’90s MIM Squier model. The only thing stock on the entire instrument is the body. It has a new pickguard, enhanced electronics, a custom-wound pickup from Fountain City Guitarworks (Kansas City), a NOS Kramer Schaller bridge from the ’80s, and a custom neck finished and fine-tuned by KC producer/luthier Justin Mantooth. The secret sauce to Paul Malinowski’s setup and rhino-charging tone has nothing to do with gear, but rather the unison tuning (C-G-C-C) that he employs for most of Shiner’s songs. He hammers away on Dunlop strings (.050–.110) with Dunlop Tortex .73 mm picks (yellow).
A Blast From the Past
Prior to bringing the project P into the mix, Paul would rely on this 1983 Fender Elite Precision Bass II. As with a lot of instruments made in the ’80s, there was some serious innovation on deck. Fender’s high-end attempt at an active bass features noise-cancelling, split-coil passive pickups (Paul mentions the bridge pickup is thin sounding and never stood a chance in Shiner), an active preamp that boosts output and improves control operation, and a Bi-Flex truss rod (allowing adjustments in both directions). This one often rides in D-standard tuning (D-G-C-F). Paul feels this instrument has “a little more throat to it” than the Squier P. And a big reason this Elite looks anything but is because Paul shredded away its finish when he played with flexible copper picks for years.
Pulverizing With Peavey
During Shiner’s initial run, Malinowski pumped his Ps through a Mesa/Boogie 400+ and 2x15 cab. After the band stopped touring, he sold the rig to a friend. On the lookout for a new setup, he found luck with this Peavey Classic 400 that he scooped for $50 from the Musician’s Friend scratch-and-dent warehouse in Kansas City. The fault was resolved with a fresh fuse cap. The 400-watt bruiser runs off 14 tubes (eight 6550s, five 12AX7s, and one 12AT7). Malinowski lives in the crunch channel.
Ranger Rock Ready for Duty
This custom-made Ranger 2x15 was built by fellow Kansas City dweller Scott Reed. The design removed the industrial vibes of the ported Mesa Diesel cab he previously used for an heirloom furniture look. It does have a pair of EV15L drivers in it, too.
Malinowski’s Mass Distortion
The signal from the P goes into the Ernie Ball VP Jr that feeds the Boss TU-2 Chromatic Tuner. The first two tone ticklers are both always on. The Boss GEB-7 Bass Equalizer simply slides out the 500k frequency and the Maxon OD808 Overdrive reissue aggressively agitates the Classic 400. When Pete needs to restrain his buffalo bass tone, he pulls back the volume or changes his playing dynamics. The MXR EVH Phase 90 gets used along with an EBow. The DigiTech Bass Whammy gets used with the EBow and phaser, but is also engaged (in the low-octave setting) when he’s playing riffs on just the unison high strings to thicken everything up. The Boss MT-2 Metal Zone gets center stage for the Starless song “Giant’s Chair” or anytime he wants to ride the feedback bull. The MXR Tremolo has its moment during the intro of “Giant’s Chair” (joining the MT-2 to create a buzzsaw super chop). And the TC Electronic Flashback dazzles and delays in spacy sections.
- Last Call: Things I Learned During Quarantine - Premier Guitar ›
- Last Call: Instagram Me, Wabi-Sabi - Premier Guitar ›
- We Take the 10-Year Challenge! - Premier Guitar ›
- With Failure Comes Focus - Premier Guitar ›
- Inside Kings of Leon Guitarist Caleb Followill's Live Rig - Premier Guitar ›
This convenient, easy-to-use controller can open up an entire world of sonic shape-shifting. Here are some tips to either inspire you to try one or expand how you’re currently using this flexible, creative device.
If you’re not yet using expression pedals, you should consider them. They have the power to expand and control your sonic universe. For the uninitiated, expression pedals are controllers that typically look like volume or wah pedals. Of course, traditional volume and wah pedals are expression pedals, too, but they are dedicated to controlling only those two effects.
Modern expression pedals allow you to assign and control parameters of your stomps or modelers by moving the expression pedal as you would a volume or wah. Dunlop, Boss, Ernie Ball, Yamaha, Behringer, Mission Engineering, and other manufacturers make these handy devices.
Many, but not all, of today’s stompboxes and modelers have expression pedal inputs that allow for manipulation of one or more parameters of those devices. In the past, this required bending over and turning a knob, or trying to turn a small knob with your foot—both of which can hamper your playing. The freedom of an expression pedal is the control you have over more aspects of your sound, especially in a live setting.
Although some of the uses for expression pedals below can also be accomplished by creating multiple presets, that will not allow real-time control over the parameters like an expression pedal will. Here are some notes about expression pedal use that might get you thinking about how one could help you.
Delay Repeats: Controlling the timing of a delay with tap tempo is very common, but how about controlling the number of repeats? With an expression pedal, by setting the expression control on your delay to control the number of repeats, you can easily go from a few for your rhythm sound to more for your lead sound, and then back off again.
Reverb and Delay Mix: The mix control on reverb and delay pedals allows you to balance the amount of wet to dry signal that you hear. There is often a delicate line to having just the right amount of wet signal with these two effects. If you have too much, your sound can be washed out and undefined. Too little and it can be dry and lack space. The part you are playing, and the venue you are in, can also change the amount of mix you need for these effects. By using an expression pedal for the mix control on reverb or delay, you can alter the sound on the fly to compensate for the part and the room, including turning down the mix for busy parts and up for parts with fewer notes.“Some uses for expression pedals can also be accomplished by creating multiple presets, but that will not allow real-time control over the parameters like an expression pedal will.”
Modulation Depth: The depth of a modulation effect, like a phaser, can drastically alter your guitar sound. A light amount can create a feeling of subtle movement, while a heavy amount can give a thick, underwater-type sound. An expression pedal can help you create a constant feeling of change throughout a song, allowing you to build up and break down the depth for different sections as you see fit.
Tremolo Speed: While the speed of tremolo can often be controlled by tap tempo, using an expression pedal for the same parameter offers other creative uses of the effect. With an expression pedal, you can easily speed the tremolo up to make subtle increases to the energy of a part or slow it down to decrease the energy. You can also create drastic changes in the speed that sound like a fan accelerating or slowing down. Or you can abruptly turn the tremolo off. This last option can be an exciting way to end a song or part.
EQ Change: Every guitar player uses EQ to sculpt their sound—whether via the tone controls on your instrument or amp (modelers included), or a dedicated equalizer used as part of your rig. Subtle tweaks can help you do things like balance out different guitars, cut through the mix more, or compensate for a boomy stage. Real-time control of EQ with an expression pedal is more common in the modeler world than the amp and pedal world, but it does exist in both. For example, increasing the midrange can give you more clarity and cut for solos. Decreasing it can create a flatter sound that can help you stay in the mix with the rest of the band. An expression pedal allows you to have one setting and alter it for multiple situations or guitars as opposed to having separate presets.
While this is a very short list of options for expression-pedal use, it should give you a good place to start. The most important thing is to always be creative, have fun, and find your own voice. An expression pedal can help you do all three.
Voltage Cable Company's new Voltage Vintage Coil 30-foot guitar cable is now protected with ISO-COAT technology to provide unsurpassed reliability.
The new coiled cables are available in four eye-grabbing retro colors – Surf Green, Electric Blue, Orange and Caramel – as well as three standard colors: Black, White and Red. There is also a CME exclusive “Chicago Cream” color on the way.
Guitarists can choose between three different connector configurations: straight/straight plugs, right angle/straight and right angle/right angle options.
The Voltage Vintage Coil offers superior sound quality and durability thanks to ISO-COAT treatment, a patent-pending hermetic seal applied to solder terminations. This first-of-its-kind airtight seal prevents corrosion and oxidization, a known factor in cable failure and degradation. ISO-COAT protected cables are for guitarists who value genuine lifetime durability and consistent tone throughout their career on stage and in the studio.
Voltage cables are hand made by qualified technical engineers using the finest components available and come with a lifetime warranty.
Voltage Vintage Coil features include:
- Lifetime guarantee, 1000+ gig durability
- ISO-COAT treatment - corrosion & oxidization resistant cable internals
- Strengthened structural integrity of solder terminations
Voltage Vintage Coils carry $89.00 USD pricing each and are available online at voltagecableco.com, as well as in select guitar stores in North America, Australia, Thailand, UK, Belgium and China.
About Voltage Cable: Established in 2021, Voltage Cable Co. is a family owned and operated guitar cable company based in Sydney, Australia. All their cables are designed to be played, and built for a lifetime. The company’s ISO-COAT is a patent pending hermetic seal applied to solder terminations.
Featuring dual-engine processing, dynamic room modeling, and classic mic/speaker pairings, this pedal delivers complete album-ready tones for rock and metal players.
Built on powerful dual‑engine processing and world‑class UAD modeling, ANTI 1992 High Gain Amp gives guitarists the unmistakable sound of an original "block letter" Peavey 5150 amplifier* – the notorious 120‑watt tube amp monster that fueled more than three decades of modern metal music, from Thrash and Death Metal, to Grunge, Black Metal, and more.
"With UAFX Dream, Ruby, Woodrow, and Lion amp emulators, we recreated four of the most famous guitar amps ever made," says UA Sr. Product Manager Tore Mogensen. "Now with ANTI, we're giving rock and metal players an authentic emulation of this punishing high gain amp – with the exact mic/speaker pairings and boost/noise gate effects that were responsible for some of the most groundbreaking modern metal tones ever captured."
Key Features:
- A complete emulation of the early '90s 120‑watt tone monster that defined new genres of modern metal
- Powerful UAFX dual-engine delivers the most authentic emulation of the amp ever placed in a stompbox
- Complete album‑ready sounds with built‑in noise gate, TS‑style overdrive, and TC‑style preamp boost
- Groundbreaking Dynamic Room Modeling derived from UA's award-winning OX Amp Top Box
- Six classic mic/speaker pairings used on decades of iconic metal and hard rock records
- Professional presets designed by the guitarists of Tetrarch, Jeff Loomis, and The Black Dahlia Murder
- UAFX mobile app lets you access hidden amp tweaks and mods, choose overdrive/boost, tweak noise gate, recall and archive your presets, download artist presets, and more
- Timeless UA design and craftsmanship, built to last decades
For more information, please visit uaudio.com.
- YouTube
The Memphis-born avant-funk bassist keeps it simple on the road with a signature 5-string, a tried-and-true stack, and just four stomps.
MonoNeon, aka Dywane Thomas Jr., came up learning the bass from his father in Memphis, Tennessee, but for some reason, he decided to flip his dad’s 4-string bass around and play it with the string order inverted—E string closest to the ground and the G on top. That’s how MonoNeon still plays today, coming up through a rich, inspiring gauntlet of family and community traditions. “I guess my whole style came from just being around my grandma at an early age,” says Thomas.His path has led him to collaborate with dozens of artists, including Nas, Ne-Yo, Mac Miller, and even Prince, and MonoNeon’s solo output is dizzying—trying to count up his solo releases isn’t an easy feat. Premier Guitar’s Chris Kies caught up with the bassist before his show at Nashville’s Exit/In, where he got the scoop on his signature 5-string, Ampeg rig, and simple stomp layout, as well as some choice stories about influences, his brain-melting playing style, and how Prince changed his rig.
Brought to you by D’Addario.
Orange You Glad to See Me?
This Fender MonoNeon Jazz Bass V was created after a rep messaged Thomas on Instagram to set up the signature model, over which Thomas had complete creative control. Naturally, the bass is finished in neon yellow urethane with a neon orange headstock and pickguard, and the roasted maple neck has a 10"–14" compound radius. It’s loaded with custom-wound Fireball 5-string Bass humbuckers and an active, 18V preamp complete with 3-band EQ controls. Thomas’ own has been spruced up with some custom tape jobs, too. All of MonoNeon's connections are handled by Sorry Cables.
Fade to Black
MonoNeon’s Ampeg SVT stack isn’t a choice of passion. “That’s what they had for me, so I just plugged in,” he says. “That’s what I have on my rider. As long as it has good headroom and the cones don’t break up, I’m cool.”
Box Art
MonoNeon’s bass isn’t the only piece of kit treated to custom color jobs. Almost all of his stomps have been zhuzhed up with his eye-popping palette.
Thomas had used a pitch-shifting DigiTech Whammy for a while, but after working with Paisley Park royalty, the pedal became a bigger part of his playing. “When I started playing with Prince, he put the Whammy on my pedalboard,” Thomas explains. “After he passed, I realized how special that moment was.”
Alongside the Whammy, MonoNeon runs a Fairfield Circuitry Randy’s Revenge (for any time he wants to “feel weird”), a literal Fart Pedal (in case the ring mod isn’t weird enough, we guess), and a JAM Pedals Red Muck covers fuzz and dirt needs. A CIOKS SOL powers the whole affair.
Shop MonoNeon's Rig
Fender MonoNeon Jazz Bass V
Ampeg SVT
DigiTech Whammy
CIOKS SOL