From precious Pauls to ruby-red Jags and sparkling quirk machines, 30 PG fans flaunt their favorite guitars, amps, and pedals.
We asked and you delivered! PG tapped its diverse audience to see what prized possessions our readers keep in their personal gear collections. The submissions ran the gamut from a holy-grail guitar acquired via inheritance, a high-school graduation present, a post-coma-recovery treat, a rockin’ wedding gift, a self-build project, and many great tales of cherished tone tools.
Colin O'Hara
My mum passed away a few years ago and left me some inheritance. I used some of that money to get something I would’ve never afforded otherwise, and I knew it would never leave my side as long as I live—the above 1964 Fender Jaguar (from the pre-CBS era). It’s my most valuable (sentimental) possession and the most amazing guitar to play to boot!
Steve Tanner
If I had to pick just one it would be my 2016 Gibson Les Paul Traditional. We had lost both parents in rapid succession and after we settled everything, I had enough for a down payment on a condo and I set aside some money for a new guitar. It’s kind of the last thing they gave me.
Eric Tower
My 2011 Gibson Les Paul Studio Deluxe that I bought with my high-school graduation money. With its coil-tapping capability, I can achieve single-coil sounds along with the typical humbucker sounds of a Les Paul. And it has the most-comfortable neck I’ve ever played as well. It’s been my main guitar ever since I bought it!
Antoine Lespine
My Fender Super-Sonic. It’s not an expensive guitar but I wanted it for a long time. Finally, after recovering from a coma and long hospitalization, I decided to buy it just for the pleasure of enjoying life.
Dave Dardo
My 1983 Fender Strat Elite (hard tail) because it’s so versatile. It offers pleasing bright tones and with the turn of a few controls I can get some nice, thick mids. Pairing it with a Mesa/Boogie Single Rectifier 50-watt head into a Budda 2x12 and 2x10 open-and-closed back combination cabinet is magic.
Geo Jet
For many years, this was my go-to rig for larger venues. It’s so adaptable with the Seymour Duncan Antiquity II Mini Humbuckers in the Firebird going through the Marshall Vintage Modern half-stack. And for straight-out rock and blues, the smallbox 1987 Marshall Jubilee 2553 stack just can’t be beat.
Jeff Boule
To me, prized = integral. When you bill yourself as an electronic guitarist, you need a guitar to interface. My 1977 Fender Mustang that has a Roland GK-2 Guitar Synthesizer pickup paired with a set of Lace Red and Blue single-coils—plus a Kahler Trem and Sperzel Locking tuners—does just that. It’s my first guitar and still my main guitar.
Charles Gouger
This is my collection. The one I save if my house is on fire is my white Fender Mustang (on the couch). It’s the cheapest one in my collection, but the one I cherish the most.
Ray Vasquez
I seriously can’t pick! I waited all my life to have a setup like this: a 2005 Fender Stratocaster (MIM) that has a Seymour Duncan SJBJ-1b JB Jr Strat humbucker (bridge) matched with Seymour Duncan Antiquity single-coils (middle and neck). The VHT 12/20 is dimed for dirt, while the Vintage Sound Vintage 35 (Vibrolux-style 1x12 combo) is a loud 35 watts, so I only run it at 2.5 for cleans. This is the best tone I've ever had.
Justin Michael-Thermal Tran-Sheetz
My prized possession has to be the Tele I put together using a custom Warmoth body and neck. The body is mahogany with a cherry burst and the neck is roasted maple with a reverse headstock. I loaded this with some Seymour Duncan P-90s (the bridge has a humbucker-sized P-90) and wired a volume boost on my push-push tone knob. It plays like a dream and sounds amazing.
Bones BFMC
My first Gibson was a 1959 Melody Maker I got in 1973 from my aunt for $100 including a Gibson amp. Never looked back!
John Farmen
My 1959 ’burst clone. I never thought I’d like something that wasn’t a Tele so much.
Gregory DuPont
Easy! It’s my 2009 Ibanez Xiphos XPT700 that has a custom powder-coated trem, pickup rings, and tuning pegs.
Tracy Cooper
I have five Strats, two basses, a Tele, and three acoustics, but my go-to is the beautiful Beatrice. She’s a Jim Deacon Strat-style guitar that carries Ernie Ball Regular Slinkys (.010–.046). She’s heavy to hold, but she sounds amazing. I bought her as a run-down, non-working wreck, and I brought her back to life. She’s mama’s best girl!
Rob Peard
I gotta say it’s my Supro Limited Edition David Bowie Dual Tone with Bigsby (seen alongside the Milkman Sound The Amp). Some might say this is a shameless cash-in on Bowie’s legacy, but to be honest, I had always wanted this model because I’m a Link Wray fan foremost. Plus, I liked the idea of having a Bigsby without the compatibility issues of the original. It took over a year to receive my order, but it was perfectly constructed and set up. This is #115 of 432 made.
JB Gimena
My 2012 Fender American Vintage ’52 Telecaster is my number one guitar. It’s most precious to me because it was a gift from my wife for our wedding.
Ryan Coy
I’m a big David Gilmour fan, so it has to be my Black-Strat-esque Stratocaster that I pieced together. It features the same pickups as his signature Custom Shop model—Seymour Duncan SSL-5 Single-Coil Strat (bridge), Custom-wound Single-Coil Strat (middle), and Custom Shop Fat ’50s Single-Coil Strat (neck)—and an American Vintage synchronized tremolo with a shortened trem bar.
Phillip Eakens
Can’t make a decision so I’ll say my 2001 Gibson Les Paul Standard—arguably the world’s most perfect guitar—and my 1959 Harmony Stratotone. (It was the first guitar I ever played.) Can you hear that? The sustain … well you would if you were playing it!
Jesse Shafer
My prized possession is the guitar I built during the summer after I graduated high school. It has a mahogany neck and body, a maple top, and a rosewood fretboard. It has a Gibson scale length, and its neck is modeled after my other Les Paul, but it thins out towards the body and has a volute. Hardware includes Grover tuners and a Gotoh bridge. I disconnected the bridge pickup, and the neck pickup is a Seymour Duncan JB with 500k volume and tone pots. The side dots were made with red and blue crushed-up colored pencils. I spent about 10 hours making the truss rod cover by plying all kinds of wood-scraps together. I finished it with polyurethane. While I was buffing the body, I accidentally dropped the guitar and the body cracked in half. At one time, the entire back of it was covered in red paint. In a panic to get the paint off, I ended up touching the front of it and now there are red fingerprints on the front within the finish. The bolt-on neck joint is super crude. I made a little wooden badge inside the “f” hole.
It’s very rough around the edges—I was 18 and idiotic when I built it. That said, it plays and sounds like a dream. One of the most resonant guitars I’ve played and certainly the most resonant that I own. Intonation is astoundingly spot on. I have played many gigs with this guitar and have logged a couple thousand practice hours on it. I wouldn’t trade it or the stories I have with it for the world!
Ben Robertaccio
This 2000s Gibson Vegas Standard and my all-rosewood Tele work in almost every recording situation.
Rambo Brown
This EVH 5150III head has something special in it! I’ve tried to replace it with other EVH options (100W, EL34, 50W Stealth), but nothing ever works like it does. It pisses me off and haunts me in my sleep. I always come back to this MF-er!
Reza Moosavi
I’ve been lucky enough to acquire a few Kenneth Lawrence instruments. The first (and my favorite) is this Custom Explorer, aka “The White Walker.” This is ultimately the best guitar I’ve ever played for a multiplicity of reasons: Its level of clarity, punch, and sustain. The craftsmanship is breathtakingly exact, and it feels absolutely smooth due to the hand-rubbed oil finish.
Danny Medrano
I own my dream guitar! It’s a Gibson RD with Fishman Fluence Modern humbuckers. It’s so well balanced, the action is perfect, and its intonation is perfect. It handles every type of tone or style you can throw at it. Plus, it’s just a sexy hunk of mahogany. (These Dr. Z cabs are a close second.)
Reinaldo Andrade
My mid-’90s Yamaha Pacifica 912J. When I first saw the photo of Michael Lee Firkins with a Pacifica in Yamaha ads in guitar magazines, I knew that one day I would have my own. It was love at first sight.
Back to my 912J—it’s an incredible guitar. You can play all styles of music with ease, and it has beautiful tones. Inside detail: it came from the factory with DiMarzio pickups (a custom humbucker in the bridge and a pair of HS-2 single-coils in the middle and neck positions). If I had to stay with just one guitar, it would be this one.
Matt Deeley
This 2003 Gibson Les Paul Standard. And for me, the Les Paul’s from this era were superb. I’ve owned many guitars over the years, but this is the only one that’s stayed the course. It’s been played to death.
Joseph Torres
This is my PRS SE Mark Tremonti. (I believe it’s from 2012 judging by the serial number.) I’ve had this guitar for five years now and it’s become my ace. I love it because of its versatility and how comfortable it fits in my hands. Every time I pick it up, I remember why I wanted it in the first place. Oh yeah, I got tacky and put an Apple sticker on it. Anyway, it’s a great guitar and I can’t recommend PRS enough.
Richard Leo
I can’t afford a Gibson, but I didn’t need to with this one. The mid-’90s, Asian-made Vesta copy has the weight, tone, and feel of a Gibson 10 times its price. Plugged into my Laney VC30-212 and with clever manipulation of the tone and volume dials, I almost never need pedals. It was stolen a couple of years ago in a home robbery and still hasn’t resurfaced in the second-hand market. I haven’t found anything quite like it since.
Ryan Embree
My PRS Torero. I got it modded the way I want it with all kinds of FU-Tone goodies. This thing screams and is my main for a reason. I found it while used-guitar hunting and fought with the seller super hard to even get my hands on it.
Jeremy Santos
My 1980 Guild D-25 (made in Westerly, Rhode Island). I’m only the third owner of this absolute workhorse guitar. In fact, the guy I bought it from had a Fishman Matrix system put into it at a store in Westerly by a former Guild employee! As a founding member of a local Rhode Island acoustic duo, having a well-built, amazing-sounding acoustic is a top priority. I’ve used many different guitars over the years, but none compared to the sound and feel of this Guild! This will always be my number one. And being a Rhode Islander myself, having a guitar that was built here is pretty cool!
Rod Nesser
My 2012 Fender Cabronita FSR (MIM) that’s been retro-fitted with Fender locking tuners, a Rutters La Burrito bridge, a Les Paul-type, square-brass jack plate, and a Warmoth .09 black pickguard. I purchased this guitar in 2012 and it’s been my number one instrument since. In fact, I seldom play any of my other guitars. Together with my Vox AC30C2, Boss FRV-1 Reverb, and Selah Effects Feather Drive, this guitar has been my tone for the last eight years (and I don’t intend to change anything anytime soon). Initially, I did contemplate replacing the Fideli’Tron humbuckers for actual TV Jones Filter’Trons, but I actually like how the original Fideli’Trons sound through my amp against the bass player and loud drummer—they really cut through live! Needless to say, this axe is a keeper!
- My Biggest Gear Regret - Premier Guitar ›
- My First Guitar - Premier Guitar ›
- Question and Obsession: Hand-Me-Downs - Premier Guitar ›
- 10 Young Guitar Guns to Know - Premier Guitar ›
Walrus Audio's MAKO MkII Series offers premium all-in-one, multi-algorithm pedals with improved tonality, new UI, and added controls for versatility. Featuring new amplifier models, OLED navigation screens, and updated programs based on user feedback, these pedals are designed for inspiring studio-grade tones.
Walrus Audio is excited to announce the release of their highly ambitious and highly anticipated MAKO MkII series. With the original MAKO line, players were offered premium all-in-one, multi-algorithm models for with the D1 Delay, R1 Reverb, and M1 Modulation, as well as top-of-the-line amp and cabinet simulation with the ACS1. After four years of real-world use and experience with the first generation, the team went to work applying everything they learned and heard from players to make the next generation of MAKO pedals even better.
Each pedal in the MAKO Series has been redesigned and rebuilt for vast improvements in tonality, new UI with the addition of an OLED navigation menu screen, and added secondary controls for even greater versatility. Dialing in these inspiring studio grade tones has never been easier and has never sounded better.
The ACS1 MkII features three new amplifier models to go with the three existing models, all inspired by high-gain amps for heavy-style players to get people moving:
- The distinctively raw and punchy Peavey® 5150.
- The warm, rich, and harmonically complex Orange® Rockerverb.
- The world-famous, in-your-face Mesa Boogie® Dual Rectifier.
Additional updates on the series are as follows:
- OLED navigation screen menu for improved UI.
- Increased headroom and lowered noise floor for tonal improvement.
- Rebuilt and fine tuned programs based on user feedback.
- All six R1 programs completely rebuilt from the ground up.
- All new Grain Delay algorithm on the D1.
- Six additional cabinet models for the ACS1, designed by Justin York at York Audio.
- Total BPM Control and BPM Readout on screen for time-based effects.
- Now 128 on-board presets.
- Many new program controls (ex. size control on R1, noise gate on ACS1).
- Flanger sound added to the Chorus algorithm on M1.
MAKO MkII Series pedals are packaged in custom anodized aluminum enclosures. Exact sizes for all four pedals is 4.9” x2.52” x 2.64”. Power requirement for all four pedals is 9VDC (300mA minimum).
Walrus Audio is offering the R1 MkII, D1 MkII, and M1 MkII for $399.99. The ACS1 MkII is offered at $449.99. All are available for preorder now at walrusaudio.com and through authorized dealers with expected shipment starting in mid-October.
For more information, please visit walrusaudio.com.
Here’s how to recreate the wide-ranging Epiphone Tone Expressor system on your guitar.
Hello and welcome back to Mod Garage! This is the second part of the Mod Garage look at the Epiphone Tone Expressor system (Pt.1), which is found on the Al Caiola signature model that was built from late 1963 until 1969. After discussing the individual parts and settings last month, we will now bring it all together and see how to use the system in a modern guitar.
In general, it’s possible to use the Varitone/Tone Expressor system in any electric guitar as long as you have enough space to squeeze all the stuff into it. You can mimic a lot of different pickups with this system, but because it’s designed for guitars with humbuckers, that’s how it works best. It’s also possible to use it the other way around and thicken up single-coil pickups instead of slenderizing humbucker tones, and in a future column I’ll talk about what I like to call the “reverse Varitone” system.
For a good and simple overview about all the details from last month, I decided to use a technical drawing to show the isolated Varitone system, so it’s easy for you to identify the individual parts:
Diagram courtesy of SINGLECOIL
This is the basic structure of the Gibson Varitone system with the original values Gibson used. The inductor is a 1.5 H choke. The Epiphone Tone Expressor system is identical but uses a 15 H choke as an inductor. There is a second version of the Tone Expressor system found on the Al Caiola model using the same structure but with different values for the parts. I think this was because different pickups were used, so here are the values for the version of the system in the Al Caiola guitar:
• 15 H choke as an inductor instead of 1.5 H
• Replace the single 100k resistor with a 33k resistor
• .0033 µF cap is used instead of the .001
• .01 µF cap is used instead of the .0033
• .022 µF cap is used instead of the .01
• .047 µF cap is used instead of the .03
• .1 cap µF is used instead of the .22
For best results, use the original Gibson Varitone values along with PAF-style humbuckers—the second version will work best with mini-humbuckers or similar pickups. Depending on the pickups you use, you can experiment and make your own custom version out of it.
“You can mimic a lot of different pickups with this system, but because it’s designed for guitars with humbuckers, that’s how it works best.”
The differences are:
• Using a 15 H instead of the 1.5 H inductor will shift the notches of the filters created by the Tone Expressor system down approximately a fifth for a fuller and fatter tone. Because it is possible to combine several caps with this wiring, choosing a 15 H inductor was also a clever move to keep the tone clearer and more present. You can experiment with this, too. A choke with something between 7 and 10 H will be in the middle of both versions.
• Using a 33k instead of the 100k coupling resistor fits pickups with a lower output like the mini-humbucker perfectly, while the 100k is great for pickups with more output like a PAF.
• The different cap values also correspond to the combination of different pickups and chokes, e.g., for a twangy, Telecaster-type tone, you need a 0.22 µF cap along with a PAF humbucker, while a 0.1 µF cap will do the same along with a mini-humbucker.
So, here we go with the Al Caiola wiring, starting with how it looks in the original guitars from the ’60s. You can clearly see the big, silver-cased choke on top of the electronics as well as the caps, resistors, and the individual switches.
Photo courtesy of Bonfires Vintage
And here is the drawing of the Tone Expressor system I made for you:
Drawing courtesy of SINGLECOIL
All switches are DPDT switches, the tone and volume pots are both 500k audio, and the tone cap is 0.022 µF. A is the coupling resistor (33k or 100k), B is the five 10M ohm pulldown-resistors (one on each switch), which prevent popping noises when engaging a switch, and C is an additional 33k decoupling resistor on each switch that is necessary to decouple the switches from each other when you want to combine their settings. You don’t need that on the Varitone because you can’t combine several caps with the rotary switch.
Besides experimenting with the parameters of the choke, the caps, and the coupling resistor, you can enhance your tonal palette quick and easy by using a pickup selector switch that can engage both pickups together.
In closing, here is a scaled-down version of this wiring, in case you don’t want to use a choke or can’t find one.
Drawing courtesy of SINGLECOIL
As you can see, the coupling resistor (A) and the decoupling resistors (C) are removed. That’s because in the system with the choke (second order filter system), these are necessary, but without a choke, they’re not.
That’s it. Since we are still in the year of the Strat, next month we will have a look into the Fender Cory Wong Stratocaster, so stay tuned!
Until then, keep on modding!
Whether you’re tired of slinging combos and bigger into your car’s trunk or looking for reliable backup and backline power, these pedal-sized options have plenty to offer.
Here’s a rundown of six amps in a stompbox format. Carry soft, play loud!
Blackstar Amplification AMPED 2
A portable 100-watt pedal amp with onboard effects that’s perfect for the guitar player that wants an all-in-one watt-cranker and an effects processor
blackstaramps.com
NUX Amp Academy (NGS-6)
This compact workhorse offers 18 amp models, seven signal blocks, independent outputs, and a robust IR loader—plus, it functions as a USB audio interface.
nuxaudio.com
MayFly Audio Sunrise Amp Simulator
The MayFly emulates the classic sound of black-panel amps, including their preamp, power amp, speaker cabinet, and spring reverb. It's intended to plug directly into a PA or DAW, and includes a stereo headphone output jack.
mayflyaudio.com
Friedman IR-D
The IR-D dual-channel tube preamp is an entire Friedman rig, inspired by the JTM45, in a compact pedalboard-friendly package.
friedmanamplification.com
Strymon Iridium Amp and IR Cab Pedal
The Iridium offers three iconic tube amplifier models and nine super-high-resolution, 500 ms impulse response speaker cabinets, along with size-adjustable IR-based room ambience.
strymon.net
Revv Anniversary Series G3
The new Anniversary Edition Revv G series pedals feature new aesthetics and even more amp-like feel and tone—modeled after Revv amps’ purple channel.
revvamps.com
Polyphonic pitch shifting, adjustable ramp speed, and three-way tone switch.
Octa Psi Features:
- Instant Effect Order Switching: Solve the classic question "Octave/Pitch before or after fuzz?" with ease –just hold down both foot switches.
- Flexible Output Configuration: Switch between AllWet or Wet/Dry blend with a quick double-tap of Blend.
- Momentary or Latching Octave/Pitch: Switch between latching or momentary octaves for completecreative control, simply hold the Fuzz switch.
Polyphonic Octave and Pitch Shifter:
- Three Modes: Up, Down, and Dual modes for creating nearly every harmonic interval, includingpower chords, stacked fourths, and diminished chords.
- Momentary Mode: Perfect for dive-bombs and wild multi-octave bends.
- Adjustable Ramp Speed: For creatively timed pitch bending, just like having an onboardexpression pedal.
Transfigurating Fuzz Circuit:
- All-Analog, Transistor-Based: Delivers incredible sound with wave after wave of gain staging leading to hard clipping.
- Three-Way Tone Switch: Carve out the perfect fuzz tone with Scoop, Punch, or Psi mode.
- Massive Sound: Makes your guitar pickups sound enormous at any volume.
Stunning Design and Ease of Use:
- High Octane Circuitry – Housed in a proprietary angled aluminum enclosure for simplicity and durability.
Upgrade your sound and explore new sonic possibilities with the Octa Psi Transfigurating Fuzz Pedal.Prepare yourself to experience the ultimate in pitch-shifting, octave generation, and analog fuzz!
Octa Psi Highlights:
- Polyphonic Pitch Shifter:○ +/- Two Octave Range and nearly every harmonic interval.
- Low latency and fast-tracking for great tone in dropped tunings or wild bends.
- Switchable All-Wet ⇆ Wet/Dry Blend by double tapping the Blend control.
- Momentary or Latching Octave and Pitch Shifter by holding down the Fuzz stomp.
- Adjustable Ramp Speed for the pitch shifter by holding Octave down and adjusting Blend.4
- Three pitch-shifting modes (Up/Dual/Down) for multiple octaves, crazy intervals, chords,and even chorus modulation.
- Analog Transistor Fuzz:
- Super thick, analog transistor fuzz and distortion.
- Three-way bass response: Scoop, Punch, or Psi mode for massive undertones.
- Order switching between Fuzz ⇆ Octave (Pitch) by pressing and holding both Octave andFuzz.
Tech Specs:
- Pedal Type: Octave Fuzz and Pitch Shifter
- Switching: Momentary or Latching Pitch Shifter
- Analog/Digital: Mixed, Analog Fuzz & Digital DSP
- Effects: Polyphonic Pitch Shifter, Octave, Fuzz, Distortion
- Inputs/Outputs: TS 1⁄4” jacks
- Bypass: True Bypass or Silent Buffered Bypass, user selectable
- Power Requirements: 9-18 VDC, 150mA (high current power supply sold separately) - No battery
- Height: 2.7”
- Width: 3.9”
- Depth: 5”