Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.

A Barney Kessel Custom Saved from the Buzzards

A Barney Kessel Custom Saved from the Buzzards

This Barney Kessel Custom ’burst is in exceptional condition, with a body that practically gleams. The only mod is one exchanged tuner and patches of old screw holes on the headstock.

This 1968 Gibson signature-model hollowbody has kept its glow—and nearly all its components—through the decades.

From the sparse, smoky ballads of Julie London to the hard bop of Sonny Rollins, Barney Kessel could back up just about anybody. The bandleader, session great, Wrecking Crew member, and sideman was one of the most accomplished guitarists of his era. His chordal complexity not only got him steady work and accolades, but also a collection of signature guitar models bearing his name.


This 1968 Gibson Barney Kessel Custom is a top-of-the-line example. It’s the higher-end counterpart to the Barney Kessel Regular, both built from 1961 until 1974. They followed a trio of Barney Kessel signatures that Kay sold between 1957 and 1960.

Barney Kessels often became parts donors, with their hardware, tuners, and pickups (original PAFs, Pat. No., and T-Tops, depending on the year) being stripped and sold separately.

Each Gibson model has a hulking 17"-wide and nearly 3"-deep body, with two humbuckers, a Tune-o-matic bridge, and a bound rosewood fretboard. The attractive Barney Kessel tailpiece is also common to both, while the controls will be familiar to any Gibson player: two volume pots, two tone knobs, and a 3-way selector switch. The dual Florentine cutaways—a design first seen in these Barney Kessels and later used in Gibson’s Trini Lopez signature—cut a striking silhouette.

Of the two Gibson Kessels, the Custom alone is dressed to the nines, swapping in gold-plated hardware for the Regular’s nickel, and bowtie inlays for the Regular’s fretboard parallelograms. There’s also a 3-piece maple neck with two pinstripe-thin mahogany strips taking over for the Regular’s solid mahogany. And the Custom tops off its outfit with a pearl headstock inlay in the shape of a musical note.

Such features were a huge upgrade to the art-deco stylings and Kleenex-box pickups of Kay’s Kessel signatures, which Kessel snubbed, reportedly saying, “I don’t play that Kay. It’s a terrible guitar!” Interestingly, he often chose not to play these Gibson signatures, either, instead typically using his favorite 1940s ES-350.

When they were introduced, Gibson’s Barney Kessel Custom model had a list price of $599, while the Regular’s was $399. Both sold in respectable if not incredible numbers, with sales peaking in 1968. However, the following decades were not particularly kind to the guitars. As the vintage market took off for Les Pauls, SGs, and other classic Gibsons, Barney Kessels often became parts donors, with their hardware, tuners, and pickups (original PAFs, Pat. No., and T-Tops, depending on the year) being stripped and sold separately. You can still find Barney Kessel husks on the market—project guitars looking for a new owner to rebuild them. And many of the complete Barney Kessels you’ll find for sale have been rebuilt.

A rear view indicates this Kessel was not heavily played. There’s no belt rash, finish wear, or other marks, and the new-guitar tags typically indicate that the previous owner or owners had a collector’s sensibility.

That’s what makes the particular Barney Kessel Custom featured here so special. It’s nearly all original, with Patent pickups intact and even its Custom-stamped hang tags. The only modification is one replaced tuner (along with a couple patched screw holes from a previous replacement). The cherry in its cherry sunburst finish is one of the most vibrant we’ve ever seen, and the condition of the finish overall is in impeccable vintage shape.

This Custom model is classic Gibson, with its 4-knob control array, 3-way toggle, and Pat. No. pickups. Unique flourishes include the special Barney Kessel tailpiece and bow-tie fretboard inlays.

Because of the wide array of Barney Kessel Customs on the used market—many with non-original parts—you can find them across the price spectrum, from about $3,000 on the low-end to $12,000 or more on the high. This Custom, listed on Reverb now by Nationwide Guitars, fittingly lands on the higher end, with an asking price of $8,999.

Sources for this article include Gruhn’s Guide to Vintage Guitars by George Gruhn and Walter Carter, American Guitars: An Illustrated History by Tom Wheeler, Reverb’s “Player Profile: The Hard-Swinging Barney Kessel” by Greg Cooper, Premier Guitar’s “Gibson and Barney Kessel” by Jim Bastian, and Reverb listings from Retrofret Vintage Guitars and Vintage Correct Parts.

Stevie Van Zandt with “Number One,” the ’80s reissue Stratocaster—with custom paisley pickguard from luthier Dave Petillo—that he’s been playing for the last quarter century or so.

Photo by Pamela Springsteen

With the E Street Band, he’s served as musical consigliere to Bruce Springsteen for most of his musical life. And although he stands next to the Boss onstage, guitar in hand, he’s remained mostly quiet about his work as a player—until now.

I’m stuck in Stevie Van Zandt’s elevator, and the New York City Fire Department has been summoned. It’s early March, and I am trapped on the top floor of a six-story office building in Greenwich Village. On the other side of this intransigent door is Van Zandt’s recording studio, his guitars, amps, and other instruments, his Wicked Cool Records offices, and his man cave. The latter is filled with so much day-glo baby boomer memorabilia that it’s like being dropped into a Milton Glaser-themed fantasy land—a bright, candy-colored chandelier swings into the room from the skylight.


Read MoreShow less

“Sometimes, I’d like very much for my guitar to sound exactly like a supa cobra.”

Luthier Creston Lea tells us about his favorite dirt pedal—an Athens, Georgia-made stomp that lets his guitar be a hero.

Let’s face it: Nobody can tell what overdrive pedal you’re using. Whether you’re in a carpeted suburban basement accompanying the hired clown at your nephew’s fifth birthday party or standing on the spot-lit monitor at Wembley, not one person knows whether the pedal at your feet cost $17 or $700, has true bypass, or has an internal DIP switch. Nobody leaning against the barn-dance corncrib or staunching a nosebleed up in the stadium’s cheap seats is thinking, “Heavens yes!! THAT is the sound of a silicone diode!”

Read MoreShow less

A dual-channel tube preamp and overdrive pedal inspired by the Top Boost channel of vintage VOX amps.

Read MoreShow less

The compact offspring of the Roland SDE-3000 rack unit is simple, flexible, and capable of a few cool new tricks of its own.

Tonalities bridge analog and digital characteristics. Cool polyrhythmic textures and easy-to-access, more-common echo subdivisions. Useful panning and stereo-routing options.

Interactivity among controls can yield some chaos and difficult-to-duplicate sounds.

$219

Boss SDE-3 Dual Digital Delay
boss.info

4.5
4
4
4

Though my affection for analog echo dwarfs my sentiments for digital delay, I don’t get doctrinaire about it. If the sound works, I’ll use it. Boss digital delays have been instructive in this way to me before: I used a Boss DD-5 in a A/B amp rig with an Echoplex for a long time, blending the slur and stretch of the reverse echo with the hazy, wobbly tape delay. It was delicious, deep, and complex. And the DD-5 still lives here just in case I get the urge to revisit that place.

Read MoreShow less