![Adrian Belew/BEAT Tour Rig Rundown [2024]](https://www.premierguitar.com/media-library/youtube.jpg?id=53638946&width=1245&height=700&quality=85&coordinates=0%2C0%2C0%2C0)
The Twang Bar King summons a court of world-class players for this fall’s BEAT Tour, including Steve Vai and fellow King Crimson alumnus Tony Levin, plus Tool drummer Danny Carey. Their mission: Playing the music of Crimson’s classic troika of ’80s albums: Discipline, Beat, and Three of a Perfect Pair. And, of course, Adrian brings his period-correct rig back out on the road, with some improvements and additions.
Adrian Belew is one of the most inventive guitarists of the past half-century—an incandescent player and songwriter who has a vast menagerie of tones and sounds at his command. You’ve heard him with King Crimson, Talking Heads, David Bowie, and Frank Zappa, among others, and with his pop band the Bears and on his solo recordings and tours.
This fall, Adrian is following dates with the Talking Heads-fueled Remain in Light tour, which he co-led with Heads keyboardist and guitarist Jerry Harrison, with the BEAT Tour—a run drawing on his recordings with King Crimson in the ’80s: the albums Discipline, Beat, and Three of a Perfect Pair. Of course, this is just a small—but extremely potent and influential—portion of his 30-year collaboration with Crimson founder Robert Fripp, who has given BEAT his blessing. But putting this repertoire in the hands of Belew, fellow Crimson alum and super-bassist Tony Levin, the incendiary Steve Vai (playing the guitar role of Fripp), and the Earth-shaking drummer Danny Carey from Tool promises magical performances. It’s also one of the year’s most-anticipated tours.
As I write this, Belew, Levin, Vai, and Carey are rehearsing on the West Coast, and by the time this video posts, they will have played their first BEAT dates. So, word is likely to have spread that Belew has brought some crucial pieces of gear he played with ’80s Crimson back into play. But here, you’ll get a close up look and listen as Premier Guitar joins Adrian—with tech Blair White of Nashville’s Eastside Music Supply—at his mid-Tennessee home for a pre-tour Rig Rundown. Dig in!Brought to you by D’Addario.
Fly Guy
The guitarist’s own Adrian Belew Signature Parker Fly is back on the music highway. The hard-to-find model sports exceptional—and some unconventional—appointments, like a 13-pin out for MIDI/synth capability. It has a DiMarzio humbucker, a Sustainiac humbucker, some Line 6 Variax components, Parker’s flat-spring vibrato system, Sperzel tuners, and a solid poplar body and basswood neck under its carbon/glass/epoxy exoskeleton.
Harmony, Man!
Adrian’s DigiTech Harmony Man is set at a fifth up during the opening of this Rig Rundown—one of his favorite settings with the pitch-shifting device.
Mind the Mastermind
Belew uses an RJM Mastermind MIDI controller as part of his rig’s cerebellum.
The Board, Part 1
A Boss GKC-AD converter lets Adrian use his Parker Fly with conventional stompboxes. Its neighbors include an Empress Compressor MkII, a Fractal Axe-Fx Ultra (Adrian has several hundred programs that he wrote into this Fractal that are not transferable to newer models), a Big Joe lithium battery power box, and volume and expression pedals. That’s all part of his self-proclaimed “modern rig.”
Sir Roland of Synth
Yes, Adrian has taken the Roland GR-300 Polyphonic Guitar Synthesizer that he acquired for King Crimson in 1981 out of mothballs, so he can recreate every sound fans for this much-anticipated tour want to hear. It was used for “Industry,” “The Sheltering Sky,” “Three of a Perfect Pair,” and other classics. “I could not do it right without this,” he says. The GR’s companions are a volume pedal, TC Electronic PolyTune, another Big Joe power box, and a custom glitching device.
Twang Me Back Home
Also on tour is Adrian’s famed Twang Bar King guitar (which debuted on the heels of his 1983 Twang Bar King album), which requires a 21-pin plug to make its sonic sorcery. In the video, Adrian shows how it functions as both a conventional guitar and the GR-300’s controller. This guitar had to be refreshed, since it was semi-retired, and is now back in full service. It started life as a Mustang, and now it’s a one-of-a-kind show pony, with a Kahler and Lace Sensor pickups. In this video, Adrian uses the Twang Bar King guitar to demonstrate some tunings for specific Crimson songs.
Racked Up
The signal to the rack gear flows from Adrian’s guitar to an always-on JAM Pedals Dinosaur Compressor, to a late-1970s V4 op-amp Big Muff, an MXR Ten Band EQ, a Strymon Deco V2, an Eventide H9, a Source Audio Artifakt lo-fi pedal (fuzz, reverb, modulation, rig mod, etc.), a Source Audio Nemesis Delay, and a Lichtlaerm Audio The Key and Gate noise gate. Adrian and Blair spent days running through various Big Muff pedals from different eras, and the ’70s V-4 is the only model that allowed Adrian to recreate his feedback acrobatics!
Echo, Echo, Echo ...
It’s not on the floor, because Adrian manipulates it with his hands, but also on this journey is his original Electro-Harmonix Echoflanger! He likes to use it set to between-setting spots, for maximum weirdness.
The Original JC-120
Yes, that’s right: Adrian is using the early-’70s Roland JC-120 amp he played with Bowie, King Crimson, and Talking Heads for the BEAT Tour. Despite its many road miles, the amp looks pristine.
Shop Adrian Belew's Rig
DiMarzio Humbucker
Sperzel Tuners
Boss GKC-AD Converter
Empress Compressor MkII
Big Muff
MXR Ten Band EQ
Strymon Deco V2
Eventide H9
Source Audio Artifakt lo-fi pedal
Source Audio Nemesis Delay
Roland JC-120
- Bass Legend Tony Levin—The Premier Guitar Interview ›
- Rig Rundown: King Crimson's Robert Fripp ›
- Rig Rundown: Adrian Belew ›
Guitarists are used to coveting cranky, old gear, but if you’re not a rack user, the H3000 might not be for you! If you ever see one of these in a studio, be sure to take some time to check it out, and maybe give the plugin a try.When it debuted in 1987, the H3000 was marketed as an “intelligent pitch-changer” that could generate stereo harmonies in a user-specified key. This was heady stuff in the ’80s! But while diatonic harmonizing grabbed the headlines, subtler uses of this pitch-shifter cemented its legacy. Patch 231 MICROPITCHSHIFT, for example, is a big reason the H3000 persists in racks everywhere. It’s essentially a pair of very short, single-repeat delays: The left side is pitched slightly up while the right side is pitched slightly down (default is ±9 cents). The resulting tripling/thickening effect has long been a mix-engineer staple for pop vocals, and it’s also my first call when I want a stereo chorus for guitar.
The second-gen H3000S, introduced the following year, cemented the device’s guitar bona fides. Early-adopter Steve Vai was such a proponent of the first edition that Eventide asked him to contribute 48 signature sounds for the new model (patches 700-747). Still-later revisions like the H3000B and H3000D/SE added even more functionality, but these days it’s not too important which model you have. Comprehensive EPROM chips containing every patch from all generations of H3000 (plus the later H3500) are readily available for a modest cost, and are a fairly straightforward install.
In addition to pitch-shifting, there are excellent modulation effects and reverbs (like patch 211 CANYON), plus presets inspired by other classic Eventide boxes, like the patch 513 INSTANT PHASER. A comprehensive accounting of the H3000’s capabilities would be tedious, but suffice to say that even the stock presets get deliciously far afield. There are pitch-shifting reverbs that sound like fever-dream ancestors of Strymon’s “shimmer” effect. There are backwards-guitar simulators, multiple extraterrestrial voices, peculiar foreshadows of the EarthQuaker Devices Arpanoid and Rainbow Machine (check out patch 208 BIZARRMONIZER), and even button-triggered Foley effects that require no input signal (including a siren, helicopter, tank, submarine, ocean waves, thunder, and wind). If you’re ever without your deck of Oblique Strategies cards, the H3000’s singular knob makes a pretty good substitute. (Spin the big wheel and find out what you’ve won!)
“If you’re ever without your deck of Oblique Strategies cards, the H3000’s singular knob makes a pretty good substitute.”
But there’s another, more pedestrian reason I tend to reach for the H3000 and its rackmount relatives in the studio: I like to do certain types of processing after the mic. It’s easy to overlook, but guitar speakers are signal processors in their own right. They roll off high and low end, they distort when pushed, and the cabinets in which they’re mounted introduce resonances. While this type of de facto processing often flatters the guitar itself, it isn’t always advantageous for effects.
Effects loops allow time-based effects to be placed after preamp distortion, but I like to go one further. By miking the amp first and then sending signal to effects in parallel, I can get full bandwidth from the airy reverbs and radical pitched-up effects the H3000 can offer—and I can get it in stereo, printed to its own track, allowing the wet/dry balance to be revisited later, if needed. If a sound needs to be reproduced live, that’s a problem for later. (Something evocative enough can usually be extracted from a pedal-form descendant like the Eventide H90.)
Like most vintage gear, the H3000 has some endearing quirks. Even as it knowingly preserves glitches from earlier Eventide harmonizers (patch 217 DUAL H910s), it betrays its age with a few idiosyncrasies of its own. Extreme pitch-shifting exhibits a lot of aliasing (think: bit-crusher sounds), and the analog Murata filter modules impart a hint of warmth that many plug-in versions don’t quite capture. (They also have a habit of leaking black goo all over the motherboard!) It’s all part of the charm of the unit, beloved by its adherents. (Well, maybe not the leaking goo!)
In 2025, many guitarists won’t be eager to care for what is essentially an expensive, cranky, decades-old computer. Even the excitement of occasional tantalum capacitor explosions is unlikely to win them over! Fortunately, some great software emulations exist—Eventide’s own plugin even models the behavior of the Murata filters. But hardware offers the full hands-on experience, so next time you spot an old H3000 in a rack somewhere—and you’ve got the time—fire it up, wait for the distinctive “click” of its relays, spin the knob, and start digging.
