Three abnormal basses, two loopers, and a few warping stomps help Kristian Dunn morph and multiply his buoyant post-rock tones.
Pedals can be a source of inspiration. But can they be the catalyst to start a band? The argument could be made that without a looper bassist Kristian Dunn and drummer Tim Fogarty would’ve never taken flight as El Ten Eleven. (The band is named after the Lockheed L-1011 TriStar airplane.)
“I knew I wanted to start a band—in my mind it was probably going to sound like El Ten Eleven—but I didn’t know exactly how I’d do it. I got Tim [Fogarty] to play drums and I thought I’d get a third person for keyboards,” recalls Dunn.
Fogarty wondered if Dunn had ever heard of a looper pedal. He hadn’t, so Dunn borrowed one from a friend and brought it to band practice. “We tried it, and right out of the gate our eyes lit up and we thought out loud, ‘Oh my god! Could we just do this with the two of us?!’”
Since 2002, the live-looping masterminds have taking to the skies performing their organic, net-free, high-wire act. (Even Fogarty loops electronic drum parts through Dunn’s Boomerang that runs into a Gallien-Krueger MB Fusion 800 and a GK 115 RBH cabinet that sits near Fogarty.) And to celebrate two decades of their clever, playfully poetic, post-rock instrumentals, they’ll release their ninth album, New Year’s Eve, on March 4, 2022 via Joyful Noise.
Before El Ten Eleven’s headlining show at Nashville’s Exit/In on January 26, juggling, tap-dancing, bass-playing Dunn gave PG’s Chris Kies 30-plus minutes to detail his cockpit. He explains how a late-night Genesis video influenced his doubleneck duality, illuminates why he always carries a marker, and then unlocks some expressive cheat codes with his pedalboard and signal chain.
Brought to you by D’Addario XPND Pedalboard.
Two Instruments, One Musician
“I’m a bass player,” declares Dunn. “I’m a terrible guitarist [laughs].” Late one night while watching VH1 Classic, Dunn saw a Genesis video where Mike Rutherford used a guitar/bass doubleneck. Up to that point, he was crudely looping by putting on and taking off various instruments. (He still uses several instruments during one song.) This doubleneck would alleviate all that rigmarole. So Dunn pivoted to eBay and immediately found this 1977 Carvin DB630 Doubleneck that has a 6-string top and 4-string bottom (30" scale length). It features a bird’s-eye maple
body, a bolt-on, hard-rock maple neck, APH-6S pickups (guitar), and APH-8 pickups (bass). Each set has master volume and tone controls, plus phase switches and coil splitters. Dunn uses Ernie Ball 2221 Slinkys (.010–.046) for the guitar and Ernie Ball 2852 Short Scale Regular Slinkys (.045–.105) for the bass. The guitar neck is tuned to E-A-D-G#-B-E, while the bass neck is tuned to D-A-D-A.
A Head Above the Rest
Here are the matching headstocks for the doubleneck, revealing both have a zero fret.
A Wal of a Good Time
“For me, Wals are the best basses in the world,” contends Dunn. “I’ve never heard a better-sounding bass.” This 1988 Wal Mk1 was bought from Rig Rundown alumnus Tim Lefebvre. It has a Brazilian mahogany core that’s masked by a bird’s-eye maple cover. The fretboard is made from Indian rosewood. The humbuckers are controlled by a master volume that can pulled out to engage “pick attack” circuity that Dunn describes as having “a brighter sound.” The pickup selector is actual a knob that dials in each pickup for maximum blending control. And each pickup has a low-pass-filter knob.
On their upcoming album, New Year’s Eve, Dunn rides the bridge pickup’s low-pass filter at about 4 and kicks on his Marshall Guv’nor for the nasty groove in “Meta Metta.” He did use roundwound strings on this instrument for years, but after having the fretboard sanded down from the wear they caused, he’s since opted for Ernie Ball 2813 Hybrid Slinky Flatwounds (.045–.105) that are kinder to the wood and still give a brighter tonal sheen.
Hungry Like the Wolf
“When I was a teenager, one of my bass heroes was John Taylor of Duran Duran, so I’ve always wanted an Aria like his,” states Dunn. This is an Aria Pro II SB-1000 with an ash body, a 7-ply maple/walnut neck (with thru construction), an ebony fretboard, a 34" scale length, a MB-1E Double Coil pickup, a 6-way low-pass filter preset, and Gotoh hardware. Varying the low-pass filter allows Dunn to loop several parts atop each other, providing tones to handle bass, guitar, and keyboards. This one takes Ernie Ball Hybrid Bass Slinkys (.045–.105).
Captain Hook
El Ten Eleven has had the pleasure of opening for Peter Hook and his various outfits several times. Hook is known to perform with custom Shergold Marathon 6 basses. (The difference with this instrument are the extra two strings are higher-tuned, allowing it to creep into a guitar’s range. Most standard models have the standard four bass strings plus one higher and one lower.)
With the help of Hook’s son, Dunn was able to secure one of the beasts. He did several tours with it, but has since retired the unique instrument because supposedly only about 100 of the 6-string models were made. Luckily, in 2019 Eastwood struck a partnership with the famed New Order and Joy Division bassist and released the Hooky Bass 6 Pro. Dunn admits to trying several other 6-string models from Fender and Schecter, but says those are designed more for guitarists, whereas the Shergold and the Hooky have bassists in mind—with wider string spacing that allows Dunn to play fingerstyle as he would on a normal 4-string.
Its ingredients are a solid alder body, bolt-on maple neck, maple fretboard, an Eastwood custom humbucker, and a 30" scale length. Dunn tunes his D-A-D-A-B-E and uses a custom range of Ernie Balls that starts with Hybrid Bass Slinkys (.045–.105), and the 5th-string is a .042 and the 6th-string is a .030.
With a Little Help from My Marker
To help him see the upper register for more precise picking, he added in some Sharpie inlays to give guidance when the lights go low during the show.
Growling With the Gallien
Dunn only plugs into this Gallien-Krueger MB Fusion 800. He gooses the treble control to help the guitar and keyboard sounds push through the other layers. He swore by GK’s 4x10 extension cab for years, but after doing a shootout with different configuration and speakers, he surprisingly favored the ported GK 115 RBH cabinet that has a ceramic driver and tweeter. He loves this setup’s hi-fi sound.
At one point, Dunn had three pedalboards and would have to crouch down and manipulate settings all night. Most of the swatches coloring his sound come from the Line 6 M9 Stompbox Modeler. The two Boomerang III Phrase Samplers are what make an El Ten Eleven show (or record) happen. In line, they’re separated by the DigiTech Bass Whammy. Dunn routes his signal this way so he can use the Whammy to shift octaves or keys on entire loops in Phrase Sampler one. The second Phrase Sampler, after the Whammy, allows him to pitch-shift specific loops without impacting the whole song or other loops (which can be done by the first Boomerang). The Strymon TimeLine sees the spotlight for precise repeats and specific delay settings not in the M9. The Electro-Harmonix Superego is a secret weapon harnessed by Dunn for sleek, reverse-sound bends. When he holds down the freeze function, it holds the original note. Then he continues holding down and plays the next note (which is not audible), but once he releases the switch, the ongoing audible note bends into the second note. The remaining two pedals are more standard fare: a Nu-X NFB-2 Lacerate FET Boost and a Marshall GV-2 Guv’nor Plus. A Boss TU-3 Chromatic Tuner keeps his instruments in check.
Bradshaw Breakthrough
Simplifying scene changes and making life a little easier for Dunn is this Custom Audio Electronics RS-T MIDI Foot Controller. The unit talks with the M9 and Strymon, alleviating some tap dancing for Dunn to pull off an El Ten Eleven performance.
This convenient, easy-to-use controller can open up an entire world of sonic shape-shifting. Here are some tips to either inspire you to try one or expand how you’re currently using this flexible, creative device.
If you’re not yet using expression pedals, you should consider them. They have the power to expand and control your sonic universe. For the uninitiated, expression pedals are controllers that typically look like volume or wah pedals. Of course, traditional volume and wah pedals are expression pedals, too, but they are dedicated to controlling only those two effects.
Modern expression pedals allow you to assign and control parameters of your stomps or modelers by moving the expression pedal as you would a volume or wah. Dunlop, Boss, Ernie Ball, Yamaha, Behringer, Mission Engineering, and other manufacturers make these handy devices.
Many, but not all, of today’s stompboxes and modelers have expression pedal inputs that allow for manipulation of one or more parameters of those devices. In the past, this required bending over and turning a knob, or trying to turn a small knob with your foot—both of which can hamper your playing. The freedom of an expression pedal is the control you have over more aspects of your sound, especially in a live setting.
Although some of the uses for expression pedals below can also be accomplished by creating multiple presets, that will not allow real-time control over the parameters like an expression pedal will. Here are some notes about expression pedal use that might get you thinking about how one could help you.
Delay Repeats: Controlling the timing of a delay with tap tempo is very common, but how about controlling the number of repeats? With an expression pedal, by setting the expression control on your delay to control the number of repeats, you can easily go from a few for your rhythm sound to more for your lead sound, and then back off again.
Reverb and Delay Mix: The mix control on reverb and delay pedals allows you to balance the amount of wet to dry signal that you hear. There is often a delicate line to having just the right amount of wet signal with these two effects. If you have too much, your sound can be washed out and undefined. Too little and it can be dry and lack space. The part you are playing, and the venue you are in, can also change the amount of mix you need for these effects. By using an expression pedal for the mix control on reverb or delay, you can alter the sound on the fly to compensate for the part and the room, including turning down the mix for busy parts and up for parts with fewer notes.“Some uses for expression pedals can also be accomplished by creating multiple presets, but that will not allow real-time control over the parameters like an expression pedal will.”
Modulation Depth: The depth of a modulation effect, like a phaser, can drastically alter your guitar sound. A light amount can create a feeling of subtle movement, while a heavy amount can give a thick, underwater-type sound. An expression pedal can help you create a constant feeling of change throughout a song, allowing you to build up and break down the depth for different sections as you see fit.
Tremolo Speed: While the speed of tremolo can often be controlled by tap tempo, using an expression pedal for the same parameter offers other creative uses of the effect. With an expression pedal, you can easily speed the tremolo up to make subtle increases to the energy of a part or slow it down to decrease the energy. You can also create drastic changes in the speed that sound like a fan accelerating or slowing down. Or you can abruptly turn the tremolo off. This last option can be an exciting way to end a song or part.
EQ Change: Every guitar player uses EQ to sculpt their sound—whether via the tone controls on your instrument or amp (modelers included), or a dedicated equalizer used as part of your rig. Subtle tweaks can help you do things like balance out different guitars, cut through the mix more, or compensate for a boomy stage. Real-time control of EQ with an expression pedal is more common in the modeler world than the amp and pedal world, but it does exist in both. For example, increasing the midrange can give you more clarity and cut for solos. Decreasing it can create a flatter sound that can help you stay in the mix with the rest of the band. An expression pedal allows you to have one setting and alter it for multiple situations or guitars as opposed to having separate presets.
While this is a very short list of options for expression-pedal use, it should give you a good place to start. The most important thing is to always be creative, have fun, and find your own voice. An expression pedal can help you do all three.
Tailored for Yngwie Malmsteen's signature sound, the MXR Yngwie Malmsteen Overdrive is designd to offer simple controls for maximum impact.
Working closely alongside Yngwie, the MXR design team created a circuit that delivers clarity, expressive dynamics, and rich harmonics—all perfectly tailored for his light-speed arpeggios, expressive vibrato, and big, bold riffs. The control setup is simple, with just Level and Gain knobs.
"Want to sound like Yngwie? Crank both knobs to the max."
“This pedal is the culmination of 45+ years developing a sound that’s perfect in every possible way,” Yngwie says. “I present to you: the MXR Yngwie Malmsteen Overdrive. Prepare to be amazed.”
MXR Yngwie Malmsteen Overdrive highlights:
- Perfectly tailored for Yngwie Malmsteen's signature sound and style
- Simple control setup tuned for maximum impact
- Boost every nuance with superior clarity, expressive dynamics, and rich harmonics
- Dig into light-speed arpeggios, expressive vibrato, and big, bold riffs
The MXR Yngwie Malmsteen Overdrive is available now at $129.99 street/$185.70 MSRP from your favorite retailer.
For more information, please visit jimdunlop.com.
Voltage Cable Company's new Voltage Vintage Coil 30-foot guitar cable is now protected with ISO-COAT technology to provide unsurpassed reliability.
The new coiled cables are available in four eye-grabbing retro colors – Surf Green, Electric Blue, Orange and Caramel – as well as three standard colors: Black, White and Red. There is also a CME exclusive “Chicago Cream” color on the way.
Guitarists can choose between three different connector configurations: straight/straight plugs, right angle/straight and right angle/right angle options.
The Voltage Vintage Coil offers superior sound quality and durability thanks to ISO-COAT treatment, a patent-pending hermetic seal applied to solder terminations. This first-of-its-kind airtight seal prevents corrosion and oxidization, a known factor in cable failure and degradation. ISO-COAT protected cables are for guitarists who value genuine lifetime durability and consistent tone throughout their career on stage and in the studio.
Voltage cables are hand made by qualified technical engineers using the finest components available and come with a lifetime warranty.
Voltage Vintage Coil features include:
- Lifetime guarantee, 1000+ gig durability
- ISO-COAT treatment - corrosion & oxidization resistant cable internals
- Strengthened structural integrity of solder terminations
Voltage Vintage Coils carry $89.00 USD pricing each and are available online at voltagecableco.com, as well as in select guitar stores in North America, Australia, Thailand, UK, Belgium and China.
About Voltage Cable: Established in 2021, Voltage Cable Co. is a family owned and operated guitar cable company based in Sydney, Australia. All their cables are designed to be played, and built for a lifetime. The company’s ISO-COAT is a patent pending hermetic seal applied to solder terminations.
Featuring dual-engine processing, dynamic room modeling, and classic mic/speaker pairings, this pedal delivers complete album-ready tones for rock and metal players.
Built on powerful dual‑engine processing and world‑class UAD modeling, ANTI 1992 High Gain Amp gives guitarists the unmistakable sound of an original "block letter" Peavey 5150 amplifier* – the notorious 120‑watt tube amp monster that fueled more than three decades of modern metal music, from Thrash and Death Metal, to Grunge, Black Metal, and more.
"With UAFX Dream, Ruby, Woodrow, and Lion amp emulators, we recreated four of the most famous guitar amps ever made," says UA Sr. Product Manager Tore Mogensen. "Now with ANTI, we're giving rock and metal players an authentic emulation of this punishing high gain amp – with the exact mic/speaker pairings and boost/noise gate effects that were responsible for some of the most groundbreaking modern metal tones ever captured."
Key Features:
- A complete emulation of the early '90s 120‑watt tone monster that defined new genres of modern metal
- Powerful UAFX dual-engine delivers the most authentic emulation of the amp ever placed in a stompbox
- Complete album‑ready sounds with built‑in noise gate, TS‑style overdrive, and TC‑style preamp boost
- Groundbreaking Dynamic Room Modeling derived from UA's award-winning OX Amp Top Box
- Six classic mic/speaker pairings used on decades of iconic metal and hard rock records
- Professional presets designed by the guitarists of Tetrarch, Jeff Loomis, and The Black Dahlia Murder
- UAFX mobile app lets you access hidden amp tweaks and mods, choose overdrive/boost, tweak noise gate, recall and archive your presets, download artist presets, and more
- Timeless UA design and craftsmanship, built to last decades
For more information, please visit uaudio.com.