Stuart Duncan, Viktor Krauss, and JD McPherson from the Raise the Roof touring band raise the curtain on their road gear.
Fourteen years after their Grammy-winning debut, Raising Sand, Robert Plant and Alison Krauss followed up with Raise the Roof—which was nominated for three more Grammys. Now on tour, the duo also has a new band that includes bassist Viktor Krauss, guitarist JD McPherson, and utility player Stuart Duncan. But before they hit the road, Krause, Duncan, and McPherson—and their techs Paul Ackling and Kevin Devogel— invited the PG team to a rehearsal at Soundcheck Nashville for a look behind the gear curtain. Here’s a sampling of what our team of John Bohlinger, Chris Kies, and Perry Bean saw. Watch the Rundown for the whole picture.
Brought to you by D’Addario XPND Pedalboard.
Fender Bender
This Fender Squier Telecaster—property of Stuart Duncan—has a palm bender for a steel-like effect, and wears Ernie Ball M Steel 2915s, gauged .010–.052.
Brown Silver
Duncan’s vintage Silvertone is strung with Ernie Ball Power Slinky nickelwound 2220 strings, gauged .011–.048.
Lil’ Git
Stuart’s Yamaha Guitalele uses Ernie Ball Ernesto Palla 2403 classical-style guitar strings. Also in his acoustic line-up is a Gibson J-45 and a Martin D-28, which both take Ernie Ball Earthwood phosphor bronze strings.
The Giraffe
This Gibson long-neck banjo uses Ernie Ball 5-string Banjo Frailing strings gauged at .010–.024, with loop ends.
Resophonic Rouser
Duncan’s Gold Tone Paul Beard Signature Series Resonator wears Ernie Ball bronze-alloy Earthwood light acoustic strings.
Stuart Duncan's Pedalboard
This comparatively stripped board does the job for Duncan. It’s got two Boss TU-3 tuners, an IndyGuitarist Effects custom OD, a Carl Martin TremO’vibe, and a Benado multi-effects with a Steel-Verb, Echo-Zen delay, and NutraDrive OD.
Tone Tools
Victor Krauss has a distinctive sonic setup, since he covers both bass and guitar in the band. One of his main instruments is this 1967 Galanti Grand Prix.
Towers
And a Yamaha RA-200R rotating speaker cabinet driven by a Groove Tubes GT Trio preamp.
Meet the
Here’s Krauss’ stock 1964 Gibson SG Standard.
Solid Guitars
He also plays a high-mileage 1961 Gibson Les Paul—a double-cutaway from the era before this body design became tagged as the SG.
Get Shorty!
This ’60s Vox Octave 12—a short-scale instrument also called a mando-guitar—has been modified to a 6 string.
Dano Dancer
Among his other vintage instruments is a 1957 Danelectro UB-2 6-string bass that’s still stock.
Twang Thang
One of the few new axes in his arsenal is this 2022 Gretsch Duane Eddy Bass VI.
The Organic
For acoustic, Kraus chases two options: this 1943 Gibson LG-2.
Fantastics
And the other is a velvety 1953 Martin 0-18.
Viktor Krauss' Pedalboard
From his hands and instruments’ strings, the signal goes to a Boss TU-3W tuner, an Xotic EP Booster, a Guyatone ST2 compressor, another EP Booster, a Boss LS-2 Line Selector (with a send/return to an EHX Pitch Fork and a Danelectro Back Talk), a Nobles ODR-1, a Mostortion MT10, a Boss NS-2 Noise Suppressor, a Klon KTR, a Game Changer Audio Plus Sustain (controlling a Boss RE-2 Space Echo), a Fulltone Supa-Trem2, a Strymon Volante, a Hologram Microcosm Granular Looper & Glitch pedal, a Line 6 DL4 MkII delay, a Strymon blueSky, and an Ernie Ball volume pedal for the Yamaha RA-200R, another Strymon blueSky, and a Demeter VTDB-2B Tube DI for the Danelectro.
Pink Panther
This Fender Jazzmaster features some custom work by guitar maker TK Smith and the Fender Custom Shop. All JD’s guitars are strung with D’Addarios.
Flex-Able Flyer
This Supro Dual Tone stays dropped down a half-step.
This custom TK Smith 6-string has long been one of McPherson’s favorites. Groove on those pickup covers and that whammy bar!
The Rest of the Best
The remaining gunslingers in McPherson's holster including a Fender Custom Shop Tele, a Gretsch G6134T-58 Vintage Select '58 Penguin with Bigsby, and a pair of TK Smith creations (right side)
Amp Trinity
McPherson plays through a Fender tweed Pro-Amp reissue and a ’68 Vibrolux, while a Texotica Presidio 15 hangs in as a backup, but gets used as his main sound source when he does his own opening set.
JD McPherson's Pedalboard
McPherson runs his guitars into a D’Addario tuner. From there, the signal hits an Echoplex preamp, a Fender ’65 Deluxe pedal, a Crowther Hot Cake, a Way Huge Havelina Fuzz, a Tsakalis AudioWorks Six, an MXR Tremolo, a Fender MTG Tube tremolo, an Echoplex delay, an EHX Stereo Memory Man with Hazarai, and a Dr. Scientist Reverberator and Reverberato—all into a Live Wire Solutions ABY box leading to JD’s amps.
Revv G3 Purple Channel Preamp/Overdrive/Distortion Pedal - Anniversary Edition
The Revv G3 revolutionized high gain pedals in 2018 with its tube-like response & tight, clear high gain tones. Suddenly the same boutique tones used by metal artists & producers worldwide were available to anyone in a compact pedal. Now the G3 returns with a new V2 circuit revision that raises the bar again.
If 3 Were 6
With six times the controls found on the 1 and 2 versions (if you discount the original’s on/off slider switch,) the LPB-3’s control complement offers pre-gain, boost, mid freq, bass, treble, and mid knobs, with a center detent on the latter three so you can find the midpoint easily. A mini-toggle labeled “max” selects between 20 dB and 33 dB of maximum gain, and another labeled “Q” flips the resonance of the mid EQ between high and low. Obviously, this represents a significant expansion of the LPB’s capabilities.
More than just a booster with a passive tone, the LPB-3 boasts a genuine active EQ stage plus parametric midrange section, comprising the two knobs with shaded legends, mid freq and mid level. The gain stages have also been reimagined to include a pre-gain stage before the EQ, which enables up to 20 dB of input gain. The boost stage that follows the EQ is essentially a level control with gain to allow for up to 33 dB of gain through the LPB-3 when the “max” mini toggle is set to 33dB
A slider switch accessible inside the pedal selects between buffered or true bypass for the hard-latch footswitch. An AC adapter is included, which supplies 200mA of DC at 9.6 volts to the center-negative power input, and EHX specifies that nothing supplying less than 120mA or more than 12 volts should be used. There’s no space for an internal battery.
Power-Boosted
The LPB-3 reveals boatloads of range that betters many linear boosts on the market. There’s lots of tone-shaping power here. Uncolored boost is available when you want it, and the preamp gain knob colors and fattens your signal as you crank it up—even before you tap into the massive flexibility in the EQ stage.
“The preamp gain knob colors and fattens your signal as you crank it up—even before you tap into the massive flexibility in the EQ stage.”
I found the two mid controls work best when used judiciously, and my guitars and amps preferred subtle changes pretty close to the midpoint on each. However, there are still tremendous variations in your mid boost (or scoop, for that matter) within just 15 or 20 percent range in either direction from the center detent. Pushing the boost and pre-gain too far, particularly with the 33 dB setting engaged, can lead to some harsh sounds, but they are easy to avoid and might even be desirable for some users that like to work at more creative extremes.
The Verdict
The new LPB-3 has much, much more range than its predecessors, providing flexible preamp, boost, and overdrive sounds that can be reshaped in significant ways via the powerful EQ. It gives precise tone-tuning flexibility to sticklers that like to match a guitar and amp to a song in a very precise way, but also opens up more radical paths for experimentalists. That it does all this at a $129 price is beyond reasonable.
Electro-Harmonix Lpb-3 Linear Power Booster & Eq Effect Pedal Silver And Blue
