
Fig. 1
Here’s a workaround to get a similar configuration without having a third pickup. Plus, this serious tone weapon can be integrated into any given Telecaster wiring.
Hello and welcome back to Mod Garage. After writing the column about the Brent Mason Telecaster wiring in October 2021, I received a lot of requests from you about a more practical and non-invasive version of it. Well, you asked, and the Mod Garage delivers.
A lot of people don’t want to route an additional hole into their Telecasters to add a third pickup in the middle position, which is a massive task. I totally understand this, so let’s see what can be done instead, and let’s add some more tonal flexibility, which was another common request after that article.
The good news is a lot can be done. We touched on this multiple times in past columns: mimicking Stratocaster in-between tones with a Telecaster without having a middle pickup using half-out-of-phase wiring, for example. Some time ago we explored the Bill Lawrence way of doing this (“Mod Garage: The Bill Lawrence 5-Way Telecaster Circuit”) and the Jerry Donahue Telecaster wiring as well (“Decoding Jerry Donahue’s 5-Way Telecaster Wiring”). These two columns are great starting points to read about the basics of half-out-of-phase wiring and what it does.
In general, there’s nothing wrong with using these two wirings the way they are. But our goal is to get a little bit closer to the Brent Mason Telecaster wiring, plus add more tonal flexibility. Brent Mason’s wiring is straightforward—basically it’s a normal Telecaster wiring with an added middle pickup that has its own volume pot. Mason’s Telecaster is loaded with three humbucker pickups for trouble-free performance regarding hum and noise in both studio and live situations. But it doesn’t have any additional switching for splitting the individual humbuckers, so there are a lot more sounds under the hood to discover. If you need them or not ... well, it’s all up to you. The basic setup works well for Brent, and he can get his signature sounds in any given situation, but it’s not a crime to want more flexibility.
A lot of people don’t want to route an additional hole into their Telecasters to add a third pickup in the middle position, which is a massive task.
The basic plan for today looks like this:
1. Swap both pickups on your Telecaster for the correct Brent Mason models.
2. Add a triple-sound switch to each of the two pickups.
I will show you how to do this in a way you can integrate into any given Telecaster wiring, but to get the most out of it, I recommend combining it with the Jerry Donahue wiring. This way, you will receive an ultra-flexible Telecaster wiring that can also cover basic Stratocaster in-between tones.
Let’s start with the pickups. Brent uses Seymour Duncan pickups. If you want to get as close as possible you should use the following models:
- Bridge position: Vintage Stack Tele STK-T3b, which is a vintage-flavored, traditional-sounding humbucker with 4-conductor wiring.
- Neck position: Vintage Mini Humbucker, built-in 180 degrees flipped, so the open pole pieces are facing the bridge rather than the neck for more high-end and clarity in the tone. The pickup also sports a 4-conductor wiring.
If your Telecaster has the traditional vintage routing under the hood, the cavity for the neck pickup must be enlarged to make the mini humbucker fit, which can be a downside if you want to plug ’n’ play. If enlarging the routing is not an option for you, there are numerous humbuckers on the market that will fit into the routing, such as the Seymour Duncan Hot Rails and Vintage Stack Tele neck pickups. Almost every pickup manufacturer has such a pickup in its portfolio, so there are plenty of options.
Choosing a Stratocaster neck pickup will result in the same problem: They won’t fit into the standard vintage neck routing of a Telecaster.
Rig Rundown: Brent Mason [2021]
It’s impossible to overstate Brent Mason’s impact on country and, arguably, even rock guitar. Over the course of his more-than-35-year career, Mason has perf...If you have a full humbucker routing under the hood, which you can find on a lot of newer Telecaster models, you’re good to go the easy way, but keep in mind that you’ll have to enlarge the hole in the pickguard as well. Don’t forget to build it in 180 degrees flipped, like on Brent’s Telecaster, to get closer to his trademark sounds.
Changing the bridge pickup should be a no-brainer: It’s an easy 1:1 swap.
For adding the two triple-sound switches, you’ll need two DPDT on-on-on mini toggle switches. You can’t use push-pull or push-push pots for this because they’re only available as on-on or on-off versions, so the third switching position is absent. But on common Telecaster control plates, it’s no problem to place two of these switches between the two pots and you don’t need Reiki hands to operate them. But again, two holes must be drilled, so it’s not an easy mod if you want to make it look good on the control plate, straight in one line.
With the switches, each of the pickups will have three operation modes and tones:
- Full humbucker (both coils in series)
- Real single-coil split (one coil shut down to ground)
- Single-coil-esque tone (both coils in parallel)
This, combined with the second pickup plus all the features of the Jerry Donahue wiring, results in a lot of different tones. While the humbucker and single-coil-esque tones are free of hum and noise, the real single-coil split mode will also behave like a real single-coil, picking up all kinds of hum and noises.
This switching was made popular by the DiMarzio company under the name “dual sound,” which I think is confusing because it’s a triple-sound switch, not a dual one.
The good thing is that this switching is placed directly after the pickup, so in layman’s terms this means: The four wires from the humbucker are connected to the switch but only two wires are going out of the switch (hot + ground), so it’s super easy to add this feature to any given wiring.
You simply solder the hot output of the switch to the spot where usually the hot wire of the pickup is connected and solder the ground coming from the switch where the ground wire of the pickup is usually connected, and you’re done. So, it’s absolutely independent from the wiring that’s coming after the switch, and you can transfer it to any given guitar.
You can’t use push-pull or push-push pots for this because they’re only available as on-on or on-off versions, so the third switching position is absent.
Now, let’s focus on the bridge pickup to demonstrate the wiring on the switch, as seen in Fig. 1. Please note the jumper wire on the switch and don’t forget to solder it. The middle position of the switch is the real single-coil split. With the toggle up, it’s full humbucker, and the toggle down is the hum-free single-coil-esque tone. I used the Seymour Duncan color code for this because we’re talking about Seymour Duncan pickups. If you want to use pickups from a different company, you’ll have to transfer the color code using one of the many transfer charts online.
The wiring of the neck humbucker is exactly the same: the bare ground wire of both pickups always goes to ground. After wiring both pickups to their mini toggle switches, you only have to connect four wires before you’re done. The hot output of the neck pickup switch goes to the spot where usually the hot wire of the neck pickup is connected to and the hot output of the bridge pickup switch to where the hot wire of the bridge pickup is connected to. Likewise, the ground output of the neck pickup switch goes to the spot where usually the ground wire of the neck pickup is connected, and the ground output of the bridge pickup switch goes where the ground wire of the bridge pickup is usually connected.
Congratulations, you’re done! This is a good alternative to the original Brent Mason wiring, and it adds many more possible tones and variations. Especially in tandem with the Jerry Donahue wiring, this is a serious tone weapon with an almost unlimited number of sounds.
That’s it for now. Next month we’ll continue with another guitar mod, so stay tuned. Until then ... keep on modding!
- First Look: Fender Brent Mason Telecaster - Premier Guitar ›
- Rig Rundown: Brent Mason [2021] ›
- The Telecaster Mod Guide - Premier Guitar ›
- DIY Stratocaster Preamp Mod ›
On our season two finale, the country legend details his lead-guitar tricks on one of his biggest hits.
Get out the Kleenex, hankies, or whatever you use to wipe away your tears: It’s the last episode of this season of Shred With Shifty, a media event more consequential and profound than the finales of White Lotus and Severance combined. But there’ll be some tears of joy, too, because on this season two closer, Chris Shiflett talks with one of country music’s greatest players: Vince Gill.
Gill’s illustrious solo career speaks for itself, and he’s played with everyone from Reba McEntire and Patty Loveless to Ricky Skaggs and Dolly Parton. He even replaced Glenn Frey in the Eagles after Frey’s death in 2017. His singing prowess is matched by his grace and precision on the fretboard, skills which are on display on the melodic solo for “One More Last Chance.” He used the same blackguard 1953 Fender Telecaster that you see in this interview to record the lead, although he might not play the solo the exact way he did back in 1992.
Tune in to learn how Gill dialed his clean tone with a tip from Roy Nichols, why he loves early blackguard Telecasters and doesn’t love shredders, and why you never want to be the best player during a studio session.
If you’re able to help, here are some charities aimed at assisting musicians affected by the fires in L.A:
https://guitarcenterfoundation.org
https://www.cciarts.org/relief.html
https://www.musiciansfoundation.org
https://fireaidla.org
https://www.musicares.org
https://www.sweetrelief.org
Credits
Producer: Jason Shadrick
Executive Producers: Brady Sadler and Jake Brennan for Double Elvis
Engineering Support by Matt Tahaney and Matt Beaudion
Video Editor: Addison Sauvan
Graphic Design: Megan Pralle
Special thanks to Chris Peterson, Greg Nacron, and the entire Volume.com crew.
$149
Marshall 1959 Super Lead
The very definition of classic, vintage Marshall sound in a highly affordable package.
There’s only one relevant question about Marshall’s new 1959 Super Lead overdrive/distortion pedal: Does it sound like an actual vintage Super Lead head? The answer is, simply and surprisingly, yes. The significant difference I heard within the voice of this stomp, which I ran through a Carr Vincent and a StewMac Valve Factory 18 kit amp for contrast, is that it’s a lot quieter than my 1972 Super Lead.
The Super Lead, which bore Marshall’s 1959 model number, debuted in 1965 and was the amp that defined the plexi sound. That sound is here in spades, clubs, diamonds, and hearts. Like the Super Lead, the pedal is easy to use. The original’s 3-band EQ is replaced by a single, rangeful tone control. The normal dial and the volume, which together mimic the character created by jumping the first and second channels of a plexi head, offer smooth, rich, buttery op-amp driven gain and loudness. And the high-treble dial functions much like the presence control on the original amp.
The pedal is sturdy and handsome, too. A heavy-duty metal enclosure evokes the classic black-with-gold-plate plexi look and a vintage-grille-cloth motif. Switches and knobs (the latter with rubber sides for slip-free turning) are ultra solid, and—refreshingly—there’s a 9V battery option in addition to a barrel-pin connection. Whether with single-coils or humbuckers, getting beefy, sustained, historic tones took moments. I especially delighted in approximating my favorite Super Lead head setting by flooring the high treble, normal, and tone dials, and turning back the tone pots on my Flying V, evoking Disraeli Gears-era Clapton tone. That alone, to me, makes the 1959 Super Lead stomp a bargain at $149.The Miku was introduced about 10 years ago and is based on the vocal stylings of Hatsune Miku, a virtual pop icon. But it does much more than artificial vowels and high-pitched words.
It’s tempting to think of this pedal as a joke. Don’t.
It all started a few years ago through a trade with a friend. I just wanted to help him out—he really wanted to get a fuzz pedal but didn’t have enough cash, so he offered up the Korg Miku. I had no idea then, but it turned out to be the best trade I’ve ever made.
Here’s the truth: the Korg Miku is not your typical guitar pedal. It won’t boost your mids, sculpt your gain, or serve up that warm, buttery overdrive you’ve always worshipped. Nope. This little box does something entirely different: It sings! Yes, sings in a Japanese kawaii accent that’s based on the signature voice of virtual pop icon Hatsune Miku.
At first glance, it’s tempting to dismiss this pedal as just a gimmick—a joke, a collector’s oddity, the kind of thing you buy for fun and then forget next to your Hello Kitty Strat. But here’s the twist: Some take it seriously and I’m one of those people.
I play in a punk band called Cakrux, and lately I’ve been working with a member of a Japanese idol-style girl group—yeah, it’s exactly the kind of wild mashup you’d ever imagine. Somewhere in the middle of that chaos, the Miku found its way into my setup, and weirdly enough, it stuck. It’s quirky, beautiful, occasionally maddening, and somehow … just right. After plenty of time spent in rehearsals, studio takes, and more sonic experiments than I care to admit, I’ve come to appreciate this pedal in unexpected ways. So here are a few things you probably didn’t know about this delightfully strange little box.
It’s Not Organic—and That’s OK
Most guitar pedals are chasing something real. Wah pedals mimic the human voice—or even a trumpet. Tube Screamers? They’re built to recreate the warm push of an overdriven tube amp. Cab sims aim to replicate the tone of real-world speaker setups. But the Miku? It breaks the mold. Instead of emulating reality, it channels the voice of a fictional pop icon. Hatsune Miku isn’t a person—she’s a vocaloid, a fully digital creation made of samples and synthesis. The Miku doesn’t try to sound organic, it tries to sound like her. In that sense, it might be the only pedal trying to reproduce something that never existed in the physical world. And honestly, there’s something oddly poetic about that.
A World-Class Buffer
Here’s a fun fact: I once saw a big-name Indonesian session guitarist—you know, the kind who plays in sold-out arenas—with a Miku pedal on his board. I was like, “No way this guy’s busting out vocaloid lines mid-solo.” Plot twist: He only uses it for the buffer. Yep, the man swears by it and says it’s the best-sounding buffer he’s ever plugged into. I laughed … until I tried it. And honestly? He’s not wrong. Even if you never hear Miku sing a note, this pedal still deserves a spot on your board. Just for the tone mojo alone. Wild, right?
“The Miku is one of those pedals that really shouldn’t work for your music, but somehow, it just does.”
Impossible to Tame
Most pedals are built to make your life easier. The Miku? Not so much. This thing demands patience—and maybe a little spiritual surrender. First off, the tracking can be finicky, especially if you’re using low-output pickups. Latency becomes really noticeable and your picking dynamics suddenly matter a lot more. Then there’s the golden rule I learned the hard way. Never—ever—put anything before the Miku. No fuzz, no wah, no compressor, not even a buffer! It gets confused instantly and says “What is going on here?” And don’t even think about punching in while recording. The vocal results are so unpredictable, you’ll never get the same sound twice. Mess up halfway? You’re starting from scratch. Same setup, same take, same chaotic energy. It’s like trying to recreate a fever dream. Good luck with that.
Full Range = Full Power
Sure, it’s made for guitar, but the Miku really comes to life when you run it through a keyboard amp, bass cab, or even a full-range speaker. Why? Because her voice covers way more frequency range than a regular guitar speaker can handle. Plug it into a PA system or a bass rig, and everything sounds clearer, richer, way more expressive. It’s like letting Hatsune Miku out of her cage.
The Miku is one of those pedals that really shouldn't work for your music, but somehow, it just does. Is it the best pedal out there? Nah. Is it practical? Not by a long shot. But every time I plug it in, I can’t help but smile. It’s unpredictable, a little wild, and it feels like you’re jamming in the middle of a bizarre Isekai anime scene. And honestly, that’s what makes it fun.
This thing used to go for less than $100. Now? It’s fetching many times that. Is it worth the price? That’s up to you. But for me, the Korg Miku isn’t just another pedal—it’s a strange, delightful journey I’m glad I didn’t skip. No regrets here.
Two guitars, two amps, and two people is all it takes to bring the noise.
The day before they played the coveted Blue Room at Third Man Records in Nashville, the Washington, D.C.-based garage-punk duo Teen Mortgage released their debut record, Devil Ultrasonic Dream. Not a bad couple of days for a young band.
PG’s Chris Kies caught up with guitarist and vocalist James Guile at the Blue Room to find out how he builds the band’s bombastic guitar attack.
Brought to you by D’Addario.
Devilish Dunable
Guile has been known to use Telecasters and Gretsches in the past, but this time out he’s sticking with this Dunable Cyclops DE, courtesy of Gwarsenio Hall—aka Jordan Olds of metal-themed comedy talk show Two Minutes to Late Night. Guile digs the Dunable’s lightness on his shoulders, and its balance of high and low frequencies.
Storm Warning
What does Guile like about this Squier Cyclone? Simple: its color. This one is also nice and easy on the back, and Guile picked it up from Atomic Music in Beltsville, Maryland.
Crushing It
Guile also scooped this Music Man 410-HD from Atomic, which he got just for this tour for a pretty sweet deal. It runs alongside an Orange Crush Bass 100 to rumble out the low end.
James Guile’s Pedalboard
The Electro-Harmonix Micro POG and Hiwatt Filter Fuzz MkII run to the Orange, while everything else—a DigiTech Whammy, Pro Co Lil’ RAT, and Death by Audio Echo Dream 2—runs to the Music Man. A TC Helicon Mic Mechanic is on board for vocal assistance, and a TC Electronic PolyTune 3, Morley ABY, and Voodoo Labs Pedal Power 3 Plus keep the ship afloat.