
Photo 1
Let’s build one of my favorite DIY guitar tools that I use daily in my shop. I’ll show you two versions and then explain how to put them into action.
Welcome back to Mod Garage. After receiving numerous requests to show more DIY tools for guitarists, today we’ll explore one of my favorites. For years I’ve used this one in the shop daily and I’m sure you’ll love it. It’s cheap and easy to build, but very effective for analyzing circuits of electric guitars and basses without opening the electronic compartment or lifting the pickguard. It’s a kind of adaptor or extension to measure a pickup’s DC resistance (DCR) from outside the guitar. After building one, we’ll discuss how to interpret the measurements.
The DCR of a pickup is by far the most common parameter you can read when reading pickup descriptions and often it’s used as an indicator of the output. The reason for this is that it’s easy to measure, but, sadly, it doesn’t tell us anything about a pickup’s output nor its tone. To quote pickup designer Bill Lawrence: “DC resistance tells you as much about a pickup’s tone and output as the shoe size tells you about a person’s intelligence.”
I’ve written about DCR as a pickup parameter in detail and you can read about it in “Mod Garage: Demystifying DCR.”
DCR is not a primary parameter in pickup design. It’s simply the result of the type and gauge of the pickup’s wire, the number of turns, and other parameters like the winding pattern, etc. But it isn’t completely useless, and we can use it as a good reference point for analyzing pickups both inside and outside a guitar or bass circuit. All you need for this is a digital multimeter (DMM). You don’t need an expensive calibrated precision DMM—any entry level DMM will work. You can get a simple digital DMM for $10, but if you want to invest in a better device, it can’t harm.
The easiest way to analyze a pickup is outside a circuit. Simply set your DMM to ohm and connect the two pickup leads to your DMM. If your DMM doesn’t have an auto-range function, set it to 20k ohm. Now you’ll get the DCR reading for your pickup. You can compare it to the factory specs of your pickup and it should be close. If your DMM shows “infinite” or “overload,” you know the pickup wire is broken. Let’s say your pickup should read 7k ohm, but yours reads around 2-3k ohm. Your pickup likely has a short circuit somewhere in the winding. Used this way, the DCR is always good to quickly check if a pickup is alive or not.
To quickly analyze a guitar or bass circuit with one or more pickups, you first need to build the DIY adaptor tool this column is about. There are two different versions, and you don’t need much for this:
- Version #1: This is the quick and dirty version. You need a standard 6.3 mm straight mono plug (the same type on all your guitar cables), some wire of your choice (preferably in two different colors), and two insulated alligator clips.
- Version #2: A more elegant version that you can also use with a scope if you have one. You need the same parts as for version #1, but instead of two alligator clips, you need two 4 mm banana plugs, and the two wires need to be longer than what you’d use for Version #1.
So, heat up your soldering iron and let’s get to building version #1.
- Solder one piece of wire to the HOT terminal of the mono plug and another one to the GROUND terminal. I prefer a red wire for the HOT and a black wire for the GROUND terminal (Photo 1).
- Solder an insulated alligator-clip to each end of the two wires, preferably a black one to the black wire and a red one to the red wire. Ready!
Version #2 is built the same way, but, instead of alligator clips, you solder a 4 mm banana plug to each end of the two wires, if possible, also in black and red. The two wires should be long enough that can place your DMM and/or scope at some distance from the guitar. In Photo 2, you can see version #1 on the top and version #2 on the bottom.
The difference between the two versions is that with version #1 you put the plug into the output jack of the guitar, connecting the two probes of your DMM to the alligator clips: the black probe of the DMM goes to ground (black wire) and the red probe goes to hot (red wire) as seen in Photo 3. With version #2, you need to remove the two probes from your DMM, plugging the two banana plugs directly into your DMM or your scope, also seen in Photo 3.
Both versions work equally well. Version #2 is just easier to operate when you also want to use the adaptor for a scope.
For a quick check, you can also directly touch the hot and ground terminals with the probes of your DMM, but you need both hands or a second person for this if you want to play around with the controls or the pickup-selector switch.
Now we can easily check four things with this tool, assuming everything is connected the way it should be and your DMM is set to ohm and auto-range or the 20k ohm scale if your DMM doesn’t have an auto-range mode:
- Do you receive a reading on your connected DMM? If not, check if the volume pot is fully opened. Do you receive a reading now? If so, close the volume pot completely and see if you still receive a reading. No? Perfect, you just proved that the volume pot is alive and well.
- With a fully opened volume pot and a reading on your DMM, slowly turn down the volume and watch the reading on the DMM. If you receive some crazy reading, chances are good there is a treble bleed network on your volume pot. If the reading slowly goes down to zero, you know that there is no treble bleed network on the volume pot, and you can check if it’s an audio or linear volume pot (plus the taper it has, if it’s an audio pot). Let’s say we have a 500k volume pot. When you close the volume pot halfway and receive a reading around 250k, you know it’s a linear pot. An audio pot, depending on its taper, will result in a much higher reading on the first 50 percent of the volume pot. If you read 500k until the volume pot is almost fully closed, this means the pot has a 90:10 audio taper—exactly the kind of volume pot you don’t want to have. If you read something around 300k in the middle of the volume pot, you know it’s a 60:40 audio taper.
- If the volume pot is fully opened and you don’t receive a reading on your DMM, chances are good that your output jack is broken, not connected, or connected incorrectly. Please make sure there is no activated kill-switch in the circuit that can also cause this “problem.”
- Turning the tone knob(s) will make no difference in the reading you receive. If you receive a slightly higher reading with a tone pot fully opened compared to when it’s closed, you know it’s a no-load tone pot.
There is a lot to discover from just the outside of any guitar or bass. So, now let’s see what we can measure from outside the instrument starting with a Telecaster with a 4-way switch. The readings in all examples are the readings I received with guitars I had in the shop, but they can be different in your instruments:
- Bridge pickup only: 5.85k ohm
- Neck pickup only: 6.76k ohm
- Both pickups together: 3.18k ohm
- Pickup selector switch in position #4: 12.30k ohm
The readings for both pickups are within the factory specs and are in a typical range for a vintage-flavored Telecaster pickup set. With a reading of 3.18k ohm for both pickups together, you know that both pickups are in parallel. With the reading of 12.30k ohm, you know that both pickups are in series with each other.
Here is the simplified math behind these readings:
- Series connection: DCR pickup #1 + DCR pickup #2
- In our example, it’s 5.85k + 6.76k = 12.61k ohm, which is very close to the reading of 12.30k we received. The missing 0.31k ohm are eaten up by the resistance of the pots and the tolerance of your DMM. For this test, I chose the cheapest DMM I could find in the shop. A calibrated high-quality DMM will have much less tolerance.
- Parallel connection: (DCR pickup #1 + DCR pickup #2) divided by four
- In our example, it’s 5.85k + 6.76k = 12.61k ohm divided by four = 3.15k ohm, which is very close to the reading of 3.18k ohm we received.
Now let’s repeat this with a standard Stratocaster:
- Bridge pickup only: 7.07k ohm
- Middle pickup only: 5.88k ohm
- Neck pickup only: 5.70k ohm
- Bridge + Middle pickups together: 3.26k ohm
- Neck + Middle pickups together: 2.94k ohm
All three pickups are within the factory specs of this Strat. We have a slightly hotter bridge and two vintage-flavored pickups. The two in-between positions are in parallel.
Lastly, let’s try a vintage PAF-loaded Les Paul:
- Bridge pickup only: 7.77k ohm
- Neck pickup only: 7.09k ohm
- Both pickups together: 3.74k ohm
Both PAFs have the typical vintage DCR and are in parallel in the middle position.
That’s it. Next month we’ll take a deeper look at changing wires on pickups, which is something I’ve been asked about a lot, so stay tuned!
Until then ... keep on modding!- Mod Garage: The Infamous Telecaster Neck Pickup - Premier Guitar ›
- Cult Coils: Lesser-Known Vintage Pickups - Premier Guitar ›
- 5-Way Frenzy: Vintage-Style Strat Pickup Review Roundup ... ›
Milkman’s Jerry Garcia-style JG-40 combo.
Grateful Dead-inspired gear from Milkman and Scarlet Fire helps to keep the guitarist’s sound alive.
Guitar players wanting to catch the Grateful Dead’s particular lightning in a bottle exist along a spectrum. Some are content to take inspiration from Jerry Garcia’s playing but make their own way regarding guitar choice and signal path. Others strive to emulate Garcia’s sonic decisions down to the most minor details and create signal paths as close to Jerry’s as possible. In recent years, an ecosystem of gear has developed around fostering Jerry Garcia’s electric tone, including everything from guitars, amps, and stompboxes to on-board preamps and speakers.
Entire books about the Grateful Dead’s gear have been written, so we can’t cover it all here. Garcia tinkered with all facets of his sound from about 1971 until 1978, when his signal path reached stability. By then, his On-Board Effects Loop—an innovation he developed to control how much signal reached his effects—was dialed in, his backline firm, and his choice of effects pedals solidified. Even then, adjustments were made, especially when MIDI arrived or when technology like in-ear monitoring was used. Here are some basics.
Scarlet Fire’s recreation of Garcia’s Wolf, originally built by Doug Irwin.
It starts with guitars. For players wanting to get their Jerry on, there’s a wide range of Garcia-esque instruments—with just as wide a range of prices—out there. Recreations of the Doug Irwin guitars and the Fender Alligator Strat abound. China-built models from companies likePhred Instruments can go for as little as $700 or so. Luthier Thomas Lieber apprenticed with Irwin long ago, and his Lieber Guitars will deliver a copy of a variety of Garcia models. Leo Elliott’sScarlet Fire Guitars out of Dallas, Texas, takes things in another direction. Elliott builds Doug Irwin replicas that start at $20,000 and go up from there, with a current wait time of about 18 months for an instrument. He’s outfitted many of the top Garcia guitarists today, including Tom Hamilton Jr. and Jeff Mattson. Elliott says, “I’m a self-taught luthier; I didn’t really build my first guitar until 2010. I understood a little bit about woodworking before I got started, but I learned by reading books and through trial and error. I started building replicas of Doug Irwin’s Wolf guitar right away, which is sort of like building a car and starting with a Ferrari. I didn’t know any better. Then, eventually I got to know Doug Irwin and collaborated with him. So, I got to hold Garcia’s Tiger guitar and get to know it really well, and by 2015, I had built replicas of that guitar. There’s one guy who helps me around the shop, but otherwise, I am building these guitars on my own. I’m collaborating with Doug Irwin on a new series of Tiger guitars, which will retail for 50 grand each.” That’s one way to get your Jerry going.
The JBL-inspired Milkman K-140.
Garcia’s choice of amplifiers is another matter. He preferred Fender Twin Reverbs loaded with JBL Alnico speakers, which were popular amongst many rock bands in the 1970s. The details get complicated; Garcia’s amps were heavily modified, and the Fender Twin served as a preamp that ran to a McIntosh MC-3500 power amp.
It’s hard to find vintage JBL speakers today—at least ones in good shape. San Francisco’s Milkman Sound, founded by Tim Marcus, has created a faithful reproduction of those classic JBLsthey call the K-140. They’re coupling those speakers with a Garcia-style recreation of his Fender Twin that Marcus named the JG-40. “I think 75 percent of Jerry’s tone is in the JBL speakers,” Milkman’s founder says. “But when you start to analyze the other 25 percent, you kind of have to start withDon Rich. [Editor’s Note: Rich was the guitar player in Buck Owens’ band, pioneers of the Bakersfield Sound.] That’s Jerry’s tone, too, but the difference is Garcia’s midrange was a bit throatier. It sounds clean, but really, it’s not clean at the same time. Especially his tone in the late ’70s. There is something about running that Fender Twin Reverb through the McIntosh that would just completely blow out the tone in a really interesting way.”
Garcia colored his tone with off-the-shelf effects. This was, after all, long before the days of boutique pedals. By 1978 and beyond, you’d hear him playing through an MXR Distortion+, an MXR Analog Delay, and an MXR Phase 100. He often used auto wahs, preferring the Musitronics Mu-Tron envelope filter as well as a Mu-Tron Octave Divider and a Mu-Tron combination volume and wah pedal.
When I asked Jeff Mattson, Bella Rayne, and Tom Hamilton Jr. exactly how orthodox they are about using the kind of gear that Garcia did, I got three different answers.
Mattson tells me that because Dark Star Orchestra is doing something very specific, he really has to tailor his sound as carefully to Garcia’s as he can. “Some folks get too hung up on small things, like what kind of cable to use and things like that, and I don’t go that far. But it’s important for Dark Star Orchestra to get Jerry’s sound right because we are covering different eras and different shows. In 2022, for example, we went to Europe and recreated shows from the Dead’s famous Europe ’72 tour, so you have to pay close attention to what kind of gear they were using to do that right.”
Hamilton works differently. He’s always preferred a higher-gain signal than Garcia ever did, landing in more of a British or heavy metal tone. (Randy Rhoads was a big influence.) “I’ve always approached it like, ‘What’s the new information we can put into this thing?’” he says. “Not just recreate but pushing in a forward direction. And anytime I’ve played with the guys who played with Garcia back in the day, they always said to me, ‘You’re here because you’re here. Don’t try and do what we did back in 1978 or do it because Garcia did it that way.’ They’ve always encouraged me to be myself.”
Bella Rayne is just wrapping her head around what it really means to try to sound like Garcia. “Besides Jerry, I’m influenced by guitarists like Dickey Betts and Derek Trucks, so my tone tends to be a bit heavier and bluesy,” she explains. “I’m generally running a Stratocaster through a Fender Twin Reverb. But recently, I was doing a show, and a buddy of mine set up a Jerry rig for me, and that was so cool: JBL speakers, McIntosh head, the whole setup. I had never played through one. I didn’t know what the hype was all about. I plugged in, and it was just amazing; there was such a snap, and I was really commanding the band. I can see myself keeping my current rig but adding a Dead-rig to experiment. But honestly, anything is fine; I am not picky. I just want to play the best that I can.”
PRS Guitars today launched five new three-pickup, 22-fret models across the S2 and SE series. The S2 Series release includes the S2 Special Semi-Hollow and S2 Studio, while the SE Series welcomes the SE Special Semi-Hollow, SE Studio, and SE Studio Standard.
“The distinctive pickup configurations of these five guitars deliver a versatile tonal platform, whether you’re exploring subtle textures or pushing the envelope. The deep dive into our Narrowfield technology is obvious with this launch. With both the S2 models made in our Maryland factory and the SE models made in Indonesia, our goal has been to create guitars that will inspire you and spark creativity, all at an exceptional value,” said PRS Guitars COO, Jack Higginbotham.
S2 Special Semi-Hollow
The PRS S2 Special Semi-Hollow features a pair of 58/15 LT humbuckers in the bass and treble positions and a PRS Narrowfield in the middle. A 5-way blade switch and two mini-toggles allow players to tap the humbuckers, creating twelve distinct pickup combinations for sonic exploration. The carved maple top and mahogany back encompass a semi-hollow body that adds a natural airiness and depth to the guitar’s tone while enhancing sustain.
S2 Studio
The PRS S2 Studio delivers a wide range of sonic possibilities through its distinctive single-single-hum configuration. Featuring two proprietary PRS Narrowfield pickups in the bass and middle positions and a 58/15 LT humbucker in the treble position, the S2 Studio offers a palette of sounds from single-coil clarity to vocal humbucker tones. This model also has a 5-way blade switch and push/pull tone control.
SE Special Semi-Hollow
The PRS SE Special Semi-Hollow is designed with the versatility of a hum/“single”/hum setup, bringing PRS’s Narrowfield DD pickup design to the SE Series in a classic maple-top guitar. The semi-hollow construction also enhances sustain and resonance, while the f-hole adds a classic aesthetic. The coil-tap switching system unlocks a wide range of tones through a pair of 58/15 LT “S” pickups in the bass and treble positions and a PRS Narrowfield DD “S” in the middle.
SE Studio
The PRS SE Studio’s “single”/”single”/hum pickup configuration provides a wide range of tonal options. This combination of PRS Narrowfield DD “S” bass and middle pickups with a PRS 58/15 LT “S” treble humbucker offers humbucking warmth, single-coil sparkle, and everything in between. The 5-way blade switch and push/pull tone control further enhance its versatility.
SE Studio Standard
The only bolt-on neck in this release group, the PRS SE Studio Standard brings the tone, playability, and versatility of the Studio model to the SE Series and into an all-mahogany design with a vintage-style pickguard aesthetic. At the heart of the SE Studio Standard is its versatile trio of pickups: an 58/15 LT “S” humbucker in the treble position with two Narrowfield DD “S” pickups in the middle and bass positions. The 5-way blade switch and push/pull tone control allow for an array of pickup configurations.
PRS Guitars continues its schedule of launching new products each month in 2025. Stay tuned to see new gear and 40th Anniversary limited-edition guitars throughout the year.
For the first time ever, two guitar greats, John 5 and Richie Kotzen will be heading out on the road this year. The tour will launch October 16 and run through November, hitting markets across the U.S.
Find the full tour itinerary right plus a link for tickets & VIP, including additional dates featuring John 5 only. Reserved seating tickets will go on sale Friday May 16 though a fan presale will begin today at noon local time and fans are strongly encouraged to buy early to get the best seats.
Meet and Greets for both artists will be available. For John 5 please go to: https://john5store.com/collections/vip.
Today, John 5 also announces more details of his anticipated new album. Called The Ghost, it will be released October 10 and is led by the new track “Fiend,” featuring Kenny Aronoff.
John 5 continues running public tours this month for his Knights In Satan’s Service Museum of KISS Memorabilia in Los Angeles, California. Guided tours are open to the public for one month only (with a possible expansion). Current dates available are May 12-16, May 19-23 and May 27-30. Each will be led by John 5 himself who will provide tons of rich detail and answer any questions. Secure your place HERE.
JOHN 5 continues to tour with Mötley Crüe including an upcoming residency in Las Vegas in 2025.RICHIE KOTZEN &
JOHN 5 FALL 2025 TOUR
October 16 El Cajon, CA @ Magnolia
October 17 Riverside, CA @ Fox Performing Arts
October 18 Roseville, CA @ Goldfield Trading Post
October 19 San Jose, CA @ The Ritz
October 21 Phoenix, AZ @ Celebrity Theatre
October 22 Albuquerque, NM @ KiMo Theatre
October 24 Dallas, TX @ Granada Theater
October 25 Leander, TX @ The Haute Spot
October 27 New Orleans, LA @ House of Blues
October 28 Memphis, TN @ Minglewood Hall
October 29 Nashville, TN @ Fogg Street Lawn Club
October 30 Atlanta, GA @ Variety Playhouse
October 31 Orlando, FL @ House of Blues
November 1 Fort Lauderdale, FL @ Culture Room
November 2 Clearwater, FL @ Capitol Theatre
November 4 Richmond, VA @ The National
November 5 Leesburg, VA @ Tally Ho Theater
November 6 Patchogue, NY @ Patchogue Theatre
November 11 Glenside, PA @ Keswick Theatre
November 12 Derry, NH @ Tupelo Music Hall
November 13 Foxborough, MA @ Six String Grill & Stage
November 14 Stroudsburg, PA @ Sherman Theater
November 15 Lorain, OH @ Lorain Palace Theatre
November 16 Columbus, OH @ The King Of Clubs
November 17 Warrendale, PA @ Jergels
November 19 Wyandotte, MI @ District 142
November 20 Flint, MI @ The Machine Shop
November 21 Fort Wayne, IN @ Piere’s
November 22 St. Charles, IL @ Arcada Theatre
November 23 Belvidere, IL @ Apollo Theatre
November 25 Denver, CO @ Oriental Theater
November 29 Pioneertown, CA @ Pappy & Harriet's*
*John 5 only
AEROSMITH guitarist and songwriter JOE PERRY is set to return to the road for a series of August performances with THE JOE PERRY PROJECT. The 8-date run kicks off August 13 in Tampa, FL and wraps August 23 in Port Chester, New York, with an August 19 performance in PERRY’s Boston hometown (see the itinerary below). For the North American trek—which marks the first solo shows for PERRY this year—the legendary guitarist will be joined by his Aerosmith bandmates Brad Whitford (guitar) and Buck Johnson (keys), along with The Black Crowes’ Chris Robinson (vocals), and Stone Temple Pilots’ Robert DeLeo (bass), and Eric Kretz (drums).
“Well…it’s time to let the music do the talkin again,” PERRY says. “I’m really excited about the JPP line up this year!!!! Most of these guys played with me at The Roxy in L.A. at the debut event for my latest solo album [Sweetzerland Manifesto] in January 2018. They’re all busy as hell but thankfully they’re able to carve out some time for this run. And I’m not only lucky enough to have Brad Whitford onstage with me but Chris Robinson of The Black Crowes! [who sang ‘Fortunate One’ on Sweetzerland Manifesto MKII], Robert DeLeo and Eric Kretz from STP!!! and Buck Johnson who plays keys and sings with Aerosmith, the Hollywood Vampires, and is also a solo artist in his own right.”
For the shows, the Rock and Roll Hall of Fame inductee says “the set list is gonna include my fav JPP cuts, STP, Black Crowes, and with Brad we’ll be hitting the Aero hits and some deep cuts and then ya never know!!!! Gonna be a BLAST, and if you’ve ever been to one of my shows you know the words GARAGE BAND on STEROIDS come to mind! See you there!!!!”
DATE | LOCATION | VENUE |
Wednesday, August 13 | Tampa, FL | Seminole Hard Rock - Tampa |
Thursday, August 14 | Hollywood, FL | Seminole Hard Rock - Hollywood |
Saturday, August 16 | Toronto, ON | HISTORY |
Sunday, August 17 | Muskoka, ON | Kee to Bala |
Tuesday, August 19 | Boston, MA | Wang Theatre |
Wednesday, August 20 | Hampton Beach, NH | Hampton Beach Casino Ballroom |
Friday, August 22 | Mashantucket, CT | The Premier Theater at Foxwoods Resort Casino |
Saturday, August 23 | Port Chester, NY | Capitol Theatre |