These party-rockin’ tone hunters plug their idiosyncratic axes into gifted Klons, helping them turn Music City into riff city.
Nashville has long been the hub for all things country music but in the last two decades, transplant rockers like Jack White, the Black Keys, Megadeth’s Dave Mustaine, Judas Priest’s Richie Faulkner and others, have all have made the 615 home. Adding to its growth is the organic blossoms generated via the rock block, cultivating names like Paramore, All Them Witches, Bully, Moon Taxi, The Wild Feathers, The Band Camino, and the guitar extraordinaires that make up Diarrhea Planet.
We got caught up with the semi-retired fearsome foursome for their first headlining performance at the Ryman Auditorium ahead of their return to Bonnaroo. We covered why neck humbuckers are useless (but neck dives rule), how the whole band was gifted Klon KTRs, and what each shredator does to stand in and out among their collective guitarmegeddon.Brought to you by D’Addario dBud Earplugs.
73
Diarrhea Planet’s unofficial 7th member is longtime tech and friend Dave Johnson of Scale Model Guitars. (Johnson has done several DIY features for PG, check them out!) Here is his 73rd build based on the Solid Guitar design. Constructed in 2015 it has an alder body, maple neck, and ebony fretboard. The alder was selected to keep the guitar’s weight under five pounds, the neck shape is based on a ’61 Melody Maker, and the fireworks ignite by way of the single Greer Wind humbucker wound by Porter Pickups. He opted for this one because it walks a fine line between a P-90 and PAF for a bouncy, rounder, snappier sound that sits best in DP. The switch is for a “high-octane” mod that bypasses the tone and volume controls and for a direct connection to the output jack for highway-to-the-danger-zone moments. He’s been loyal to D’Addario Medium Balanced Tension strings (.011 –.050) and Dunlop Tortex picks (.88 mm).
Diarrhea Planet Special
This bargain-bin bruiser is a Kramer Striker that cost Smith a mere $349. It has been overhauled by Dave Johnson in a recurring manner that includes Gotoh locking tuners, Graph Tech ResoMax bridge, removed the middle and neck pickups and dropped in a Bare Knuckle Nailbomb, and got a proper fret job and setup.
800 Killer
Smith has always been chasing a “bigger, more low-mid focused JCM 800” and this striking steal of a deal he scored fit the bill. The 120-watt Peavey 6505 runs into a Tyrant Tone 1x12 cabinet loaded with a single Electro-Voice Electro-Voice EVM12L Black Label Zakk Wylde speaker.
Jordan Smith’s Pedalboard
Smith’s board holds the staples for DP gigs. It starts with a Spaceman Effects Explorer Phaser, an Electronic Audio Experiments 0xEAE Boost (his favorite pedal on the planet), Boss SD-1 SuperOverdrive, and a Mr. Black Tapex 2. Diarrhea Planet might be the only band to earn KTRs. Back in 2014 or ’15, Klon creator Bill Finnegan and his employee Matt visited DP during a soundcheck near their East Coast-based shop. Finnegan loaned the foursome their own KTR to test out during the run-through. They plugged into them and instantly realized this was the sound they’ve been missing. Finnegan enjoyed the soundcheck so much that he told the band they deserved the magical red boxes and they’ve been on their boards ever since. “I’ll never sell it because we somehow impressed the guy that built one of the most influential pedals ever. It’s an honor and it means so much to me,” admits Smith. Everything rides on a Pedaltrain Classic Jr and is brought to life with a Voodoo Lab Pedal Power 2 Plus.
Dave Does It Again!
Brent Toler hit the Ryman stage with one guitar—his partscaster baby. Brent sourced all the parts (including painting the body in his parents’ garage) and luthier pal Dave Johnson helped put the pieces together. The single humbucker (with a push-pull pot engaging single-coil mode) was handwound by Alex Avedissian out of Atlanta. It has a HipShot bridge with an upgraded Hipshot Tremsetter Strat tremolo Stabilizer 401000. The roasted maple neck and dazzling pickguard was scooped off eBay. He recently switched from D’Addario strings to local faves Stringjoy.
Steal of a Deal
Traveling into town for this pair of shows, Toler packed light with just his partscaster and a pedalboard. He borrowed this Laney LC30 from bassist Mike Boyle who scored the 1x12 tube combo for $200.
Brent Toler’s Pedalboard
Paring down for carry-on limits, Toler returned to Guitar Town with a svelte pedal platform home to five effects and a tuner: a MXR Carbon Copy, a Mooer Yellow Comp, a Bogner Ecstasy Blue, Klon KTR, a MXR Phase 95, and an Electro-Harmonix EHX-2020 Tuner Pedal.
Mother’s Mark
Standing out is a must when you’re battling frequencies with three other guitarists. Emmett Miller takes a left when his brethren take a right. His custom guitar (again built by Scale Model Guitars’ Dave Johnson) is a loving recreation of a ’80s Fender Performer. Miller first got a taste of the futuristic axe when studying at the National Guitar Workshop under Shane Roberts. He posted on Craigslist in the hopes of borrowing a Performer to copy for Dave to build from. He quickly received an anonymous response that included a complete blueprint of the instrument. It has 24 scalloped frets on an ebony fretboard, a Wilkinson/Gotoh VS-100N Tremolo bridge the middle and neck pickups are Hot Stack Plus Strat hum-canceling single-coils, a handwound Avedissian humbucker in the bridge (with a coil-spot mod), and the smaller dip switch adds in the neck pickup with the bridge humbucker. And the best part of the whole thing, the night-sky artwork was painted by Emmett’s mother.
Tone School
When DP first disbanded in 2018, Miller went off to school to study electrical engineering and digital signal processing, and in doing so, he “had to play through a computer now.” He landed on the Kemper Profiler and hasn’t looked back. He avoids cabling and routes his guitar through a Line 6 Relay G55 Wireless unit.
Emmett Miller’s Pedalboard
Keeping the Kemper on amp-only duties, Miller has a standard pedal playground comprised of a Strymon El Capistan, a Klon KTR, a JHS Sweet Tea V3, Dunlop Cry Baby wah, a Moog EP-3 Expression pedal, a MXR Uni-Vibe, and a TC Electronic PolyTune. Up top you might notice what appears to be a Boss pedal enclosure, but that’s just a goof gift from fellow guitarist Evan Bird.
The Classiest and Nastiest
“I think, in my arms anymore, anything but a Tele feels weird. I do like other guitars, but these are the only ones I can throw around and then still pick back up and play,” concedes DP’s fourth guitarist Evan Bird. This MIM Fender Telecaster Thinline Deluxe was facelifted by Dave Johnson (shocker). It got a refret, improved hardware—including a 3-barrel brass bridge, Gotoh locking tuners, and strap locks—plus a fresh set of Avedissian Night Prowler humbuckers (with a push-pull coil-split mod on the bridge ’bucker). Both his Teles take D’Addario NYXL1052 Light Top/Heavy Bottom strings.
That’s Gold, Jerry, Gold!
Supplementing duties with Thinline is this Squier John 5 signature that’s finished in Frost Gold. It got the Dave Johnson Scale Model treatment and also features Seymour Duncan Pearly Gates with Les Paul-wiring and CTS pots.
Tubes, Schmubes
After toting around a hefty Twin Reverb for years, Bird made the back-saving switch to a Fender Tone Master Twin Reverb that knocks off half the weight. Another issue he was having with the OG tube Twin was blowing up the preamp section by hitting it too hard with pedals. Since making the move to the Tone Master, he’s been flying clear of any meltdowns. And keeping the cables away from his feet is the Sennheiser EW-DX EM 2 Two-Channel wireless unit.
Evan Bird’s Pedalboard
Bird keeps it lean and mean with a 4-stomp pedalboard that includes an EarthQuaker Devices Dispatch Master, XTS Winford Drive, Greer Amps Supa Cobra, and a Klon KTR. Occasional tuning is assisted by the Boss TU-3 and a Voodoo Lab Pedal Power 2 Plus brings the juice.
Shop Diarrhea Planet's Rig
- DIY: How to Level, Crown & Dress Frets on Your Guitar ›
- DIY: How to Wire a Guitar Output Jack ›
- DIY: Hot-Rodding a Squier Bullet HT ›
- Factory Tour: Seymour Duncan ›
- The Band Camino Rig Rundown - Premier Guitar ›
Empress Effects is proud to announce the release of the Bass ParaEq, a bass-specific parametric EQ pedal.
Building on the success of their acclaimed ParaEq MKII series, which has already gained popularity with bassists, the Bass ParaEq offers the same studio-grade precision but with features tailored for bass instruments.
Basses of all types – including electric and upright basses with active and passive electronics – can benefit from the Bass ParaEq’s tone-sculpting capabilities.
The new pedal follows the success of the Empress Bass Compressor and ParaEq MKII Deluxe, which have become some of the company’s best-reviewed and top-selling products. The Bass Compressor’s popularity confirmed what Empress had long suspected: bassists are eager for tools built with their needs in mind, not just adaptations of guitar gear.
The Bass ParaEq retains the line’s powerful 3-band parametric EQ and studio-style features while introducing a bass-optimized frequency layout, a selectable 10MΩ Hi-Z input for piezo-equipped instruments, a dynamically-adjusted low shelf, and automatic balanced output detection—perfect for live and studio use alike.
The Bass ParaEq also offers an output boost, adjustable by a dedicated top-mounted knob and activated by its own footswitch, capable of delivering up to 30dB of boost. It’s perfect for helping your bass punch through during key moments in live performance.
Whether dialing in clarity for a dense mix or compensating for an unfamiliar venue, the Bass ParaEq offers precise tonal control in a compact, road-ready form. With 27V of internal headroom to prevent clipping from even the hottest active pickups, the Bass ParaEq is the ultimate studio-style EQ designed to travel.
Key features of the Bass ParaEq include:
- Adjustable frequency bands tailored for bass instruments
- Selectable 10MΩ Hi-Z input for upright basses and piezo pickups
- Auto-detecting balanced output for long cable runs and direct recording
- Three sweepable parametric bands with variable Q
- High-pass, low-pass, low shelf, and high shelf filters
- Transparent analog signal path with 27V of internal headroom
- Buffered bypass switching
- Powered by standard 9V external supply, 300mA (no battery compartment)
The Bass ParaEq is now shipping worldwide. It can be purchased from the Empress Effects website for $374 USD and through authorized Empress dealers globally.
Kiesel Guitars has introduced their newest solid body electric guitar: the Kyber.
With its modern performance specs and competitive pricing, the Kyber is Kiesel's most forward-thinking design yet, engineered for comfort, quick playing, and precision with every note.
Introducing the Kiesel Kyber Guitar
- Engineered with a lightweight body to reduce fatigue during long performances without sacrificing tone. Six-string Kybers, configured with the standard woods and a fixed bridge, weigh in at 6 pounds or under on average
- Unique shape made for ergonomic comfort in any playing position and enhanced classical position
- The Kyber features Kiesel's most extreme arm contour and a uniquely shaped body that enhances classical position support while still excelling in standard position.
- The new minimalist yet aggressive headstock pairs perfectly with the body's sleek lines, giving the Kyber a balanced, modern silhouette.
- Hidden strap buttons mounted on rear for excellent balance while giving a clean, ultra-modern look to the front
- Lower horn cutaway design for maximum access to the upper frets
- Sculpted neck heel for seamless playing
- Available in 6 or 7 strings, fixed or tremolo in both standard and multiscale configurations Choose between fixed bridges, tremolos, or multiscale configurations for your perfect setup.
Pricing for the Kyber starts at $1599 and will vary depending on options and features. Learn more about Kiesel’s new Kyber model at kieselguitars.com
The Sunset is a fully analog, zero latency bass amplifier simulator. It features a ¼” input, XLR and ¼” outputs, gain and volume controls and extensive equalization. It’s intended to replace your bass amp both live and in the studio.
If you need a full sounding amp simulator with a lot of EQ, the Sunset is for you. It features a five band equalizer with Treble, Bass, Parametric Midrange (with frequency and level controls), Resonance (for ultra lows), and Presence (for ultra highs). All are carefully tuned for bass guitar. But don’t let that hold you back if you’re a keyboard player. Pianos and synthesizers sound great with the Sunset!
The Sunset includes Gain and master Volume controls which allow you to add compression and classic tube amp growl. It has both ¼” phone and balanced XLR outputs - which lets you use it as a high quality active direct box. Finally, the Sunset features zero latency all analog circuitry – important for the instrument most responsible for the band’s groove.
Introducing the Sunset Bass Amp Simulator
- Zero Latency bass amp simulator.
- Go direct into the PA or DAW.
- Five Band EQ:
- Treble and Bass controls.
- Parametric midrange with level and frequency controls.
- Presence control for extreme highs.
- Resonance control for extreme lows.
- Gain control to add compression and harmonics.
- Master Volume.
- XLR and 1/4" outputs.
- Full bypass.
- 9VDC, 200mA.
Artwork by Aaron Cheney
MAP price: $210 USD ($299 CAD).
PRS Guitars celebrates 40 years with the limited edition McCarty SC56. Featuring vintage-inspired design and modern innovations, this single-cutaway guitar pays tribute to Ted McCarty and his impact on the industry. With only 400 pieces available, this instrument is a must-have for collectors and performers alike.
PRS Guitars today announced the 40th Anniversary McCarty SC56 Limited Edition. With a classic PRS single-cutaway body shape and carefully chosen specifications, the McCarty SC56 is both a tribute to tradition and a reliable tool for the modern performer. Only 400 pieces will be made.
“The SC56, signifying Singlecut and 1956, model is our most recent tribute to my late mentor Ted McCarty and his impact on the guitar industry. We started with our take on a classic late ‘50s singlecut body. 1956 marks the year that Ted first had guitars made with his newly coined 'humbucker' pickups. It also happens to be the year I was born. Bringing vintage design into the modern era, we loaded this model with our McCarty III pickups, meticulously designed to deliver warm, clear, vintage tone with exceptional note separation and dynamics,” said PRS Guitars Founder & Managing General Partner, Paul Reed Smith.
Anchored by a maple top and mahogany back, the 24.594” scale length and 22-fret Pattern Vintage neck work with Phase III non-locking tuners and PRS two-piece bridge to promote its musical sustain. The PRS McCarty III pickups are controlled by a simple layout — two volume controls, two tone controls, and a three-way toggle on the upper bout.
Single-cutaway guitars are known to be heavier than their double-cutaway counterparts. The McCarty SC56 Limited Edition design incorporates weight-relief, decreasing the weight of the guitar by about 2/3 of a pound, while maintaining several points of attachment between the guitar top and back to eliminate the “hollow” sound of the cavities and promote tone transfer.
With appointments like binding on the fretboard, classic bird inlays, and a vintage-inspired nitrocellulose finish, the 40th Anniversary McCarty SC56 Limited Edition blends heritage and innovation into a timeless instrument.
PRS Guitars continues its schedule of launching new products each month in 2025.
For more information, please visit prsguitars.com.