Sub Pop’s seminal grunge pioneers Mark Arm and Steve Turner detail their stalwart Gretsch and Guild sidekicks before divulging their favorite fuzz circuits—and go-to modern copies—and showcasing pedalboards that reincarnate their guitar tone into grimy, filthy, and feral wooly mammoths.
Universe: “Super Fuzz or Big Muff?”
Mudhoney: “Both!”
What else would you expect from a band that titled their mischievously visceral ’88 debut EP after both pedals (Superfuzz Bigmuff)?
Formed in the late ’80s by guitarists Mark Arm and Steve Turner after the dissolution of their band Green River (which included future Mother Love Bone and Pearl Jam cofounders Jeff Ament and Stone Gossard), Mudhoney long ago solidified themselves as the Seattle scene’s big brothers and tightest pack. Through their 11 LPs, five EPs, and six live albums, Mudhoney has routinely diversified and further defined their eccentric brand of raucous, aggressive, unfiltered rock ’n’ roll. Possibly more impressive than the band’s wide influence and devoted authenticity is the foursome’s bond. Drummer Dan Peters and bassist Matt Lukin (also a founding member of the Melvins) were the rhythmic bedrock for Arm and Turner’s exploding-M-80 tones since the beginning. (Arm and Turner have been friends since high school and have been playing off each other since then.) But Lukin left the band in 2001 because tour life became too much, and Guy Maddison has been thundering ever since. To see a group’s career that’s pushing past 35 years and only have one member swap is as inspirational as it is baffling. How?!
“We like each other a lot. We get along. We love what we’re doing,” remarks Arm. “Why stop, even if no one gives a shit?”
Friendship matters to Arm and Turner, but gear isn’t a concern unless it points them in one direction—east. More specifically, toward Detroit, Michigan. And even more specifically, to the Stooges. Both namecheck the livewire band and their raw power several times in our Rig Rundown. However, in a 2018 interview with Premier Guitar, they acknowledged regenerating sounds that echo influences from Neil Young and the Byrds to Devo and the Dead Kennedys. But after chasing “I-Wanna-Be-Your-Dog” sizzle, what else leads them to the gear they use? Has that mentality changed since the late ’80s?
“If you think about the aesthetics of where we come from—garage punk, and punk rock in general—a lot of it was made with cheap gear, and a lot of it was reclaiming gear that guitarists had kind of dismissed as garbage. Like the Mustang. That was my ultimate guitar back when I was a kid, but it was poo-pooed when I finally got one. I could get them for $150. The Danelectro and Silvertone amps were kind of high-rated garbage when we were getting into them. We based a lot of our sound on cheap gear, so it makes sense to me that I still buy the cheap gear,” concluded Turner.
They’re still pragmatic about their setups, preferring equipment that’s familiar and reliable. Where they chase the dragon is in stompboxes. Turner trusts the Big Muff (his favorite iteration is from the mid-’80s), while Arm’s torrid tone burns with a Super Fuzz clone. However, both have additional hot-sauce stompboxes and other effects on their pedalboards that are being auditioned trial by fire.
Hours before Mudhoney’s headlining set at Nashville’s Basement East, Arm and Turner brought PG’s Chris Kies onstage to catalog their setups. Turner started the party by talking about a pair of guitars—his battle-tested late-’60s Guild Starfire IV and a recently-acquired Fender Gold Foil Jazzmaster before kicking on his Big Muff and other pedals that unlocked Dante’s inferno. Then, Arm joined the fun by showing off his Gretsch Vintage Select ’59 Duo Jet that eventually gets pulverized by three different fuzzes.
Beggar’s Banquet
Turner has always gravitated towards the Island of Misfit Toys, and says he was intrigued when he saw Fender’s Gold Foil Jazzmaster. “When we recorded Plastic Eternity, I used a Bigsby, but I don’t own a guitar with one. So, when Fender released this model I demanded one. I actually begged for one,” he jokes. “It’s essentially a knockoff of an old Silvertone, and I think it’s hilarious for Fender to do.” He’s enjoyed getting to know the instrument, whose bigger neck and brighter pickups offer an alternative flavor to his Guild. In recent years, Turner has dialed back his string gauges and currently goes with Dunlop Heavy Core strings (.010–.048). Both his guitars are always in standard tuning.
Red Rider
The past two decades, Turner has mainly been playing a pair of Guild Starfire IVs. One is from 1967 and the other is a ’68. He doesn’t know which one is which, but believes this one to be the “newer” one. He likes it more because “it’s a little heavier, it sounds woodier, it’s got better tuning pegs, and it’s got a slightly bigger neck.” He never thought the semi-hollow would work with Mudhoney because of the massive layers of fuzz he puts on his guitars, but after taking it to band practice as a “joke” and dealing with the “quick learning curve” to EQ his gear and change where he stands in relation to his amp, he’s been on cruise control with the Starfire IV.
Couple DeVille
When Mudhoney started, Turner had a 1965 Super Reverb. He still owns that amp, but says he keeps it at home. The closest amp to that benchmark he’s encountered and plugged into is this stock Fender Hot Rod DeVille III 4x10 combo.
Steve Turner’s Pedalboard
This is the fanciest pedalboard Steve Turner has ever brought on tour. His pal and owner of Hank’s Music Exchange in Portland wired this up for him. The one thing Turner requested of Hank was that he put the MXR Micro Amp, VOX V847A Wah, and Electro-Harmonix Little Big Muff Pi at the front of the chain. Turner likes pushing the amp with the MXR and then juicing the Muff with it, too. He prefers the wah earlier in the chain, so it has as much bite as possible. “I want it to sound like a Stooges record where the wah is twice as loud as everything else!”
Turner told PG in 2018 that his favorite modern Muff is the EHX Nano edition, which he says best approximates his pinnacle pedal (a mid-’80s Big Muff). “My favorite is the Nano, the cheapest ones they make. They’re like 60 dollars or something. They’re almost disposable—because they do break. But oh, well. Buy another one! Going off memory and feel, to me the Nano sounds the most like that. In the studio, I bring in a whole bunch [of other fuzzes], but then sometimes I just get lost trying to fix something that doesn’t really need to be fixed, you know what I mean?”
Speaking of fuzz, Turner was experimenting with the Before finding a friend in Gretsches, Arm had been playing SGs, Jaguars, Hagstroms, and others. He acquired his 1991 Gretsch G6129T-59 Vintage Select ’59 Silver Jet reissue because he wanted to look like Billy Zoom. This black stallion G6128T-59 Vintage Select ’59 Duo Jet is a more recent reissue he prefers for its chambered body, which is lighter and more resonant. After reading the Black Sabbath: Symptom of the Universe biography by Mick Wall where he learned that Iommi played light strings, he made the move from Ernie Ball Skinny Top Heavy Bottom Slinkys (.010–.052) down to Ernie Ball Super Slinkys (.009–.042). while pursuing the ’60s Fuzzrite nastiness felt on the Stooges’ early rippers. Signal swayers include a Strymon Flint and a vintage script-logo MXR Phase 90. And an Ibanez TS9DX Turbo Tube Screamer joined the bunch when gifted from former Green River bandmate Stone Gossard. A Peterson Stomp Classic Strobotuner keeps his guitars in check and a Voodoo Lab Pedal Power 2 Plus ignites his stomps.
A Goodie!
Before finding a friend in Gretsches, Arm had been playing SGs, Jaguars, Hagstroms, and others. He acquired his 1991 Gretsch G6129T-59 Vintage Select ’59 Silver Jet reissue because he wanted to look like Billy Zoom. This black stallion G6128T-59 Vintage Select ’59 Duo Jet is a more recent reissue he prefers for its chambered body, which is lighter and more resonant. After reading the Black Sabbath: Symptom of the Universe biography by Mick Wall where he learned that Iommi played light strings, he made the move from Ernie Ball Skinny Top Heavy Bottom Slinkys (.010–.052) down to Ernie Ball Super Slinkys (.009–.042).
“Slide in Standard Tuning Sounds Like Shit”
Turner admits that the band’s earliest work features some earache moments where he played slide on his Hagstrom in standard. He now puts the ’60s Hagstrom III (with a Filter’Tron neck pickup) in a custom open-A tuning for slide playing.
Set It and Forget It
Arm bought this ’70s Fender Super Six Reverb years ago and hasn’t worried about touring amps ever since. The 100-watt combo has a sextet of 10" speakers, a quad of 6L6 power tubes, and a quintet of 12AX7 preamp tubes.
Mark Arm’s Pedalboard
Arm isn’t a gearhead, but he definitely loves fuzz. His current pedal playground includes three variants—an EarthQuaker Devices Life Pedal V3 octave/distortion/booster, an Ibanez Soundtank FZ5 60’s Fuzz (housed in the gray box), and a Stromer Mutroniks Superfuzz.
Arm on the Ibanez: “In the ’90s, one of the boxes that I landed on that I liked most was this Ibanez Soundtank-series 60’s Fuzz. I think they only made it for a year or two, because they’re made of this cheap plastic—they look like a little black Volkswagen Beetle—and they just break. Anytime I’d find one in a music shop, I’d just buy it and have a buddy put the guts into a metal box.”
Then, Arm recounts when, after a few shows during an early Mudhoney tour with Sonic Youth, Lee Ranaldo asked him, “What are you going for?” Mark responded: “Ideally, it’d be like ‘I Wanna Be Your Dog’ where Ron Asheton plays the opening chords, and it just hangs there and breaks up. I want that sound, all the time.” That sound Arm was approximating was coming from a Super Fuzz. His current copy for the vintage eviscerator is the Stromer Mutroniks edition. The remaining pedals are all from Portland’s Catalinbread: Epoch Boost preamp/buffer, Belle Epoch tape echo, Valcoder tremolo, and Sabbra Cadabra overdrive. A Peterson Stomp Classic Strobotuner puts Arm’s guitars in the sweet spot.G6128T-59 Vintage Select ’59 Duo Jet
Ibanez TS9DX Turbo Tube Screamer
Peterson Stomp Classic Strobotuner
EarthQuaker Devices Life Pedal V3 octave/distortion/booster
Dunlop Heavy Core Strings (.010–.048)
Beetronics FX Tuna Fuzz pedal offers vintage-style fuzz in a quirky tuna can enclosure.
With a single "Stinker" knob for volume control and adjustable fuzz gain from your guitar's volume knob, this pedal is both unique and versatile.
"The unique tuna can format embodies the creative spirit that has always been the heart of Beetronics, but don’t let the unusual package fool you: the Tuna Fuzz is a serious pedal with great tone. It offers a preset level of vintage-style fuzz in a super simple single-knob format. Its “Stinker” knob controls the amount of volume boost. You can control the amount of fuzz with your guitar’s volume knob, and the Tuna Fuzz cleans up amazingly well when you roll back the volume on your guitar. To top it off, Beetronics has added a cool Tunabee design on the PCB, visible through the plastic back cover."
The Tuna Fuzz draws inspiration from Beetronics founder Filipe's early days of tinkering, when limitedfunds led him to repurpose tuna cans as pedal enclosures. Filipe even shared his ingenuity by teachingclasses in Brazil, showing kids how to build pedals using these unconventional housings. Although Filipe eventually stopped making pedals with tuna cans, the early units were a hit on social media whenever photos were posted.
Tuna Fuzz features include:
- Single knob control – “Stinker” – for controlling output volume
- Preset fuzz gain, adjustable from your guitar’s volume knob
- 9-volt DC operation using standard external power supply – no battery compartment
- True bypass switching
One of the goals of this project was to offer an affordable price so that everyone could own a Beetronicspedal. For that reason, the pedal will be sold exclusively on beetronicsfx.com for a sweet $99.99.
For more information, please visit beetronicsfx.com.
EBS introduces the Solder-Free Flat Patch Cable Kit, featuring dual anchor screws for secure fastening and reliable audio signal.
EBS is proud to announce its adjustable flat patch cable kit. It's solder-free and leverages a unique design that solves common problems with connection reliability thanks to its dual anchor screws and its flat cable design. These two anchor screws are specially designed to create a secure fastening in the exterior coating of the rectangular flat cable. This helps prevent slipping and provides a reliable audio signal and a neat pedal board and also provide unparalleled grounding.
The EBS Solder-Free Flat Patch Cable is designed to be easy to assemble. Use the included Allen Key to tighten the screws and the cutter to cut the cable in desired lengths to ensure consistent quality and easy assembling.
The EBS Solder-Free Flat Patch Cable Kit comes in two sizes. Either 10 connector housings with 2,5 m (8.2 ft) cable or 6 connectors housings with 1,5 m (4.92 ft) cable. Tools included.
Use the EBS Solder-free Flat Patch Cable Kit to make cables to wire your entire pedalboard or to create custom-length cables to use in combination with any of the EBS soldered Flat Patch Cables.
Estimated Price:
MAP Solder-free Flat Patch Cable Kit 6 pcs: $ 59,99
MAP Solder-free Flat Patch Cable Kit 10 pcs: $ 79,99
MSRP Solder-free Flat Patch Cable Kit 6 pcs: 44,95 €
MSRP Solder-free Flat Patch Cable Kit 10 pcs: 64,95 €
For more information, please visit ebssweden.com.
Upgrade your Gretsch guitar with Music City Bridge's SPACE BAR for improved intonation and string spacing. Compatible with Bigsby vibrato systems and featuring a compensated lightning bolt design, this top-quality replacement part is a must-have for any Gretsch player.
Music City Bridge has introduced the newest item in the company’s line of top-quality replacement parts for guitars. The SPACE BAR is a direct replacement for the original Gretsch Space-Control Bridge and corrects the problems of this iconic design.
As a fixture on many Gretsch models over the decades, the Space-Control bridge provides each string with a transversing (side to side) adjustment, making it possible to set string spacing manually. However, the original vintage design makes it difficult to achieve proper intonation.
Music City Bridge’s SPACE BAR adds a lightning bolt intonation line to the original Space-Control design while retaining the imperative horizontal single-string adjustment capability.
Space Bar features include:
- Compensated lightning bolt design for improved intonation
- Individually adjustable string spacing
- Compatible with Bigsby vibrato systems
- Traditional vintage styling
- Made for 12-inch radius fretboards
The SPACE BAR will fit on any Gretsch with a Space Control bridge, including USA-made and imported guitars.
Music City Bridge’s SPACE BAR is priced at $78 and can be purchased at musiccitybridge.com.
For more information, please visit musiccitybridge.com.
Floyd Rose introduces new USA-made Original saddle sets in various configurations, crafted from premium hardened tool steel with precision CNC machining. Available in chrome and black finishes now.
The new facility offers immediate availability of the legendary Floyd Rose Original saddles in multiple radius configurations for the first time. Engineered to perfectly match specific fretboard curvatures, these saddle sets provide a range of radius options without the need for individual saddle shims. Alongside the classic 12” radius, Floyd Rose has unveiled 8”, 10”, 14”, 16”, and 17” radii saddle sets. Crafted from premium hardened tool steel with precision CNC machining and finished with durable, smooth plating, these saddles are built to withstand the demands of intense performances. Chrome and black sets of USA-made Floyd Rose Original Saddles in various radii are available now at the company’s website, followed by gold and black nickel finishes in the 4th quarter of 2024.
The new Floyd Rose manufacturing center in North Carolina was designed to meet growing demand while ensuring the highest quality available using modern high-tech processes. Bringing production in-house enhances control over every aspect of the process including engineering, material selection, quality control, and scheduling. The facility features four Haas VF-seriesCNC machines, delivering precision machining fine-tuned for high efficiency and clean surface finishes. Alongside machining, the company has established a state-of-the-art metal finishing department and acquired stamping equipment with new capabilities added monthly.
At the heart of the Floyd Rose USA manufacturing center is a dedicated team of engineers and technicians who excel in their craft and are deeply passionate about the legendary product line. With decades of collective experience, the company’s experts meticulously craft each component to exacting standards.
“We are ecstatic to be making these new Original saddles in the USA, giving us better control over quality and production times while offering more robust options like these new radii,” said Andrew Papiccio, longtime president of AP International Music Supply / Floyd Rose and an original owner of Kramer Guitars. "With this new state-of-the-art facility, we are poised todeliver unparalleled quality and performance to musicians worldwide. As we integrate newproducts into this facility, we are expanding our commitment to ‘Made in America’ craftsmanship.”
The company plans to ramp up production of parts and innovations at their USA factory forFloyd Rose and their new AxLabs Hardware division.
For more information, please visit floydrose.com.