
Photo 1
Ready to tweak your 6-string for maximum musical versatility?
For decades, blues and rock guitarists have been laying glass or metal cylinders across their strings to add expressive riffs to their music. Unlike a Dobro or lap steel, which is played horizontally with a bar and has its strings jacked up way off the fretboard, a standard 6-string guitar can be set up for both fretting and slide work—if you know what you're doing.
Let's explore how to finesse a guitar so its strings sit high enough to keep a slide from crashing into the frets, yet remain close enough to the fretboard that you can play chords and riffs with your fingertips. Yes, you can have it all, as Duane Allman, Johnny Winter, Sonny Landreth, Ry Cooder, Derek Trucks, and many other greats have proven over the years.
It's not too hard to set up an electric guitar for dual duties, so that's what we'll focus on. It's more of a challenge with an acoustic, but with a little ingenuity, you can also adapt the following techniques to a flattop, so read on.
Project overview.
To illustrate the steps, I'll use a 2003 Gibson Les Paul Studio (Photo 1) a client brought in to have converted into a ripping slide guitar. He wanted to stick with his moderately light .010–.049 strings so he could comp and solo as usual, but he also wanted to augment his standard riffage with slide licks when the spirit moved him.
To make this happen, I suggested he use a lightweight, straight-wall glass slide—similar to Allman and Trucks—as opposed to the heavier brass or bottleneck slides that are often favored by acoustic resonator guitarists. Why? Using a lightweight slide, such as a Dunlop Derek Trucks Signature medicine bottle or the aluminum BigHeart Firecracker, makes it possible to use slinkier strings and keep the action reasonably low. Heavier slides can sound great, but they demand stouter strings and stiffer action. A light slide allows you to find that sweet spot in your setup where you can use the same guitar for two very different techniques.
Preliminary measurements.
Photo 2
The first step is to measure three things: action at the 12th fret, neck relief, and string height at the 1st fret. These measurements will provide a baseline to work from.
Here's the process: To measure the action, first tune to pitch (this is crucial) and then place a capo on top of the 1st fret. Next use a precision metal ruler to measure the string height at the 12th fret. I use a String Action Gauge—a handy tool from Stewart MacDonald—(Photo 2) for this. You want to determine the distance between the top of the 12th fret and the bottom of both the 6th and 1st strings.
Photo 3
On this Les Paul, the gap was 3/64" for the 1st string and 4/64" for the 6th. This action is comfortable for my client, but too low for slide.
Now to measure the amount of relief. With the capo still on the 1st fret, hold down the 6th string at the last fret and measure the greatest distance between the bottom of the string and the top of the frets (Photo 3).
On my client's guitar, the relief was .012"—perfect for his current playing style and also fine for supporting a lightweight slide. If your guitar has less relief, you may need to loosen the truss rod very slightly to introduce a tad more forward bow. (Read "Time for a Neck Adjustment?" to learn more about working with a truss rod.) But before you take that route, first complete the setup I'm about to describe. It's quite possible these steps will be all you'll need to enter the slide zone.
Photo 4
Next, remove the capo (it wouldn't hurt to confirm your strings are still at pitch) and measure the height of the 1st and 6th strings at the 1st fret (Photo 4).
In this case, the height was 1/64" and 2/64" for the 1st and 6th strings, respectively. While this is ideal for fretting chords and lines, it's too low for playing slide.
From these preliminary measurements, I was able to determine what would be required to give this Les Paul its new dual identity:
- Raise the action at the bridge and then adjust individual saddles.
- Raise the action at the nut by either shimming the stock nut or carving a new one.
- Adjust the pickups to balance string-to-string volume.
- Adjust the intonation.
Adjust the bridge.
To raise the action on a Les Paul's Tune-o-matic bridge, turn the thumbwheels counter-clockwise (Photo 5). Do this in small increments, perhaps a quarter of a rotation for each thumbwheel. Retune the guitar, put a capo on the 1st fret, and then measure the action at the 12th fret again.
For starters, I suggest adjusting the action to 4/64" on both the 1st and 6th strings. Remember, you can always come back and raise the treble or bass strings a bit more if you find your slide is hitting the frets.
Adjust the saddles.
Now here's our first tricky part. Most lightweight slides (such as a glass or chrome tube, or the medicine bottle favored by Allman and Trucks) contact the strings in a straight line. However, on a guitar set up for fretting—including my client's LP—the strings follow the fretboard radius or curvature. In other words, strings 1 through 6 are subtly arched at the bridge so they sit at a consistent height above the frets.
Slide licks often incorporate two or three strings at a time. When your slide has a straight playing surface, yet the strings are arched, you'll wind up pressing some strings down more than others as you move across the fretboard. This can create subtle intonation problems within a chord or interval.
Yes, you can have it all, as Duane Allman, Johnny Winter, Sonny Landreth, Ry Cooder, Derek Trucks, and many other greats have proven over the years.
The solution is to flatten the string radius at the bridge so the strings sit in a straight line that corresponds to the slide's playing surface. On a guitar with individually adjustable saddles, like a Strat, it's easy to raise or lower each string to achieve the target 4/64" gap between the bottom of all the strings and the top of the 12th fret.
However, on a guitar with a fixed-radius bridge—such as a Les Paul with a Tune-o-matic—some saddle slots will need to be deepened slightly to create a flat line between strings 1 and 6. Typically it's the middle saddles that need attention, but your current bridge radius and string gauges will determine which slots require recutting and by how much.
Gauged nut slotting files, which are available from Allparts, Stewart-MacDonald, and other luthier suppliers, work great for this task because you can precisely size the slot to match the string. For example, knowing that my client plays a .010–.046 set, I'll use a .036 gauge nut file to deepen the notch for the .036 A string.
The process is pretty straightforward: After you've set the bridge so the 1st and 6th strings are 4/64" above the 12th fret, measure the 2nd string. If it's also 4/64" at the 12th fret, move onto the 3rd string. But if it's higher, carefully deepen the slot to bring the 2nd string down to 4/64".
Photo 6
When re-cutting a notch, always follow the angle of the string as it emerges from the tailpiece up to the saddle (Photo 6). Go slowly, retuning and then measuring the action every few file strokes. Gently clean off any burrs on the front or back of the saddle using the nut file. This will prevent the string from getting caught up on the saddle and creating tuning issues.
Repeat the process on each inside string until you've achieved a uniformly level playing surface across all six strings. It's painstaking work, but the payoff in tone and feel will be worth the effort. Once you've flattened the radius and are satisfied with the overall action, you'll be ready to move over to the nut.
Raise the nut.
From experience, I knew that having the 1st string sit 1/64" above the 1st fret is too low for slide, so I'd need to raise the nut on this Les Paul. The trick, of course, is to get the nut high enough to accommodate slide technique, yet not make the guitar unplayable when fretting. Based on the owner's playing style, string gauges, and light glass slide, I decided on a uniform height of 2/64" for all six strings on his guitar.
There are only two ways to correctly and permanently raise the nut: You can shim it or carve a new one. The owner wanted to keep the stock Gibson nut, which was in excellent condition, so we elected to shim it.
Here's how that works: First remove the nut by gently tapping it on the fretboard side with a flathead screwdriver and small hammer (Photo 7). Next, clean up the nut slot by removing the excess glue with a small chisel or razor knife, and then scrape any glue off the nut.
Photo 8
Now super-glue the nut onto a thin piece of mahogany (Photo 8). For this kind of shim, I use a .020" thick piece of wood.
Trim off the excess wood around the string nut with a razor knife (Photo 9). Install the string nut and secure it with one drop of super glue on the face of the nut between the 4th and 3rd strings.
Adjust the pickups.
After you change the action on a guitar—especially to this degree—it's a good idea to adjust the pickups to make sure the treble-to-bass and string-to-string balance is how you want it.
First start with overall pickup height. Hold the 1st and 6th strings down at the last fret and measure the distance from the bottom of the strings to the top of the pickup. The distances in this table provide a good starting point for humbuckers.
Photo 10
The next step is to adjust the individual pole pieces using a small flathead screwdriver (Photo 10). The goal here is to create an even and consistent string-to-string balance.
Begin with the 5th string pole piece and adjust it to match the volume of the 6th string. Raising the pole piece will make a string louder and vice versa. Then move to the 4th string and compare it to strings 6 and 5. Continue working across the strings, checking them relative to each other and making small tweaks as necessary. Typically, the 3rd string is the loudest, so don't be surprised if you wind up lowering it below the pickup cover to keep it in balance with the other strings.
It's a wrap.
The final step to complete the project is install a new set of strings, tune to pitch, and adjust the intonation. If you need instructions for checking and adjusting the intonation, read "How to Install a New Tune-o-matic Bridge."
With the string height and pickups adjusted for playing slide, our project Les Paul is ready to return to its owner. But before he carts it off, I'll listen to him play and see if the bridge height and pickup pole pieces are dialed in to his satisfaction. If you set up your own guitar for double duty, you may find yourself making small adjustments after playing it for a few days. That's the beauty of being your own tech, right? That said, if you're not confident you can safely work with glue, files, and other tools around your guitar, take it to your local pro.
[Updated 11/18/21]
- DIY: How to Set up Jazzmasters & Jaguars - Premier Guitar ›
- Mod Garage: Humbucker Height Adjustment - Premier Guitar ›
- Epiphone Prophecy SG Review - Premier Guitar ›
- Epiphone Prophecy SG Review - Premier Guitar ›
Well-designed pickups. Extremely comfortable contours. Smooth, playable neck.
Middle position could use a bit more mids. Price could scare off some.
$2,999
Ernie Ball Music Man StingRay II
A surprise 6-string collaboration with Cory Wong moves effortlessly between ’70s George Benson and Blink-182 tones.
Announced at the 2025 NAMM show, Cory Wong’s new collaboration with Ernie Ball Music Man scratched an itch—namely, the itch for a humbucker-loaded guitar that could appease Wong’s rock-and-R&B alter ego and serve as complement to his signature Fender Strat. Inspiration came from no further than a bandmate’s namesake instrument. Vulfpeck bassist Joe Dart has a line of signature model EBMM basses, one of which uses the classic StingRay bass body profile. So, when Wong went looking for something distinctive, he wondered if EBMM could create a 6-string guitar using the classic StingRay bass body and headstock profile.
Double the Fun
Wong is, by his own admission, a single-coil devotee. That’s where the core of his sound lives and it feels like home to him. However, Wong is as inspired by classic Earth, Wind & Fire tones and the pop-punk of the early ’90s as he is by Prince and the Minneapolis funk that he grew up with. The StingRay II is a guitar that can cover all those bases.
Ernie Ball has a history of designing fast-feeling, comfortable necks. And I can’t remember ever struggling to move around an EBMM fretboard. The roasted maple C-shaped neck here is slightly thicker in profile than I expected, but still very comfortable. (I must also mention that the back of the neck has a dazzling, almost holographic look to the grain that morphs in the light). By any measure, the StingRay II’s curves seemed designed for comfort and speed. Now, let’s talk about those pickups.Hot or Not?
A few years ago EBMM introduced a line of HT (heat-treated) pickups. The pickups are built with technology the company used to develop their Cobalt and M-Series strings. A fair amount of the process is shrouded in secrecy and must be taken on faith, but EBMM says treating elements of the pickup with heat increases clarity and dynamic response.
To find out for myself, I plugged the StingRay II into a Fender Vibroverb, Mesa/Boogie Mark VII, and a Neural DSP Quad Cortex (Wong’s preferred live rig). Right away, it was easy to hear the tight low end and warm highs. Often, I feel like the low end from neck humbuckers can feel too loose or lack definition. Neither was the case here. The HT pickup is beautifully balanced with a bounce that’s rich with ES-335 vibes. Clean tones are punchy and bright—especially with the Vibroverb—and dirty tones have more room for air. Individual notes were clear and articulate, too.
Any guitar associated with Wong needs a strong middle-position or combined pickup tone, and the StingRay II delivers. I never felt any significant signal loss in the blended signal from the two humbuckers, even if I could use a bit more midrange presence in the voicing. The midrange gap is nothing an EQ or Tube Screamer couldn’t fix, though. And not surprisingly, very Strat-like sounds were easy to achieve for having less midrange bump.
Knowing Wong’s love for ’90s alt-rock, I expected the bridge pickup to have real bite, and it does, demonstrating exceptional dynamic range and exceptional high-end response that never approached shrill. Nearly every type of distortion and overdrive I threw at it sounded great, but especially anything with a scooped-mid flavor and plenty of low end.
The Verdict
By any measure, the StingRay II is a top-notch, professional instrument. The fit and finish are immaculate and the feel of the neck makes me wonder if EBMM stashes some kind of secret sandpaper, because I don’t think I’ve ever felt a smoother, more playable neck. Kudos are also due to EBMM and Wong for finding an instrument that can move between ’70s George Benson tones and the hammering power chords of ’90s Blink-182. Admittedly, the nearly $3K price could give some players pause, but considering the overall quality of the instrument, it’s not out of line. Wong’s involvement and search for distinct sounds makes the StingRay II more than a tired redux of a classic model—an admirable accomplishment considering EBMM’s long and storied history.
Ernie Ball Music Man StingRay II Cory Wong Signature Electric Guitar - Charcoal Blue with Rosewood Fingerboard
StingRay II Cory Wong - Charcoal BlueAdding to the company’s line of premium guitar strapsand accessories, Fairfield Guitar Co. has introduced a new deluxe leather strapdesigned in collaboration with Angela Petrilli.
Based in Los Angeles, Petrilli is well-known to guitar enthusiasts around the world for her online videos. She is one of the video hosts at Norman’s Rare Guitars and has her own YouTube lesson series, the Riff Rundown. She also writes, records and performs with her original band, Angela Petrilli & The Players, and has worked with Gibson, Fender, Martin Guitars, Universal Audio, Guitar Center and Fishman Transducers.
Angela Petrilli's eye-grabbing signature strap is fully hand cut, four inches wide and lightly padded, so it evenly distributes the weight of the instrument on the shoulder and offers superb comfort during extended play. The front side features black "cracked" leather with turquoise triple stitching. The "cracked" treatment on the leather highlights the beautiful natural marks and grain pattern – and it only gets better with age and use.The strap’s back side is black suede for adhesion and added comfort, with the Fairfield Guitar Co. logo and Angela's name stamped in silver foil.
Features include:
- 100% made in the USA
- Hand cut 4” wide leather strap with light padding -- offering extra comfort for longgigs and rehearsals.
- Black suede back side avoids slipping, maintains guitar’s ideal playing position.
- Length is fully adjustable from 45” - 54” and the strap has two holes on thetailpiece for added versatility.
The Fairfield Guitar Co. Angela Petrilli signature strap is available for $150 online at fairfieldguitarco.com.
Tube Amp Doctor has reissued one of the company’s mostsought-after products: the TAD 6L6WGC-STR Blackplate™ small bottle power tube is back inproduction after a 5-year absence.
The TAD 6L6WGC-STR Blackplate™ is the tube that has made TAD so popular with boutiqueamp manufacturers and vintage tone enthusiasts since 2003. A direct replacement for 6L6 and5881 tubes, it’s a remake of the small bottle GE6L6GC and has the same warm lower midrangeand silky top end as the classic GE versions of the 1950s and 1960s. Like the historic RCA5881, this tube features exclusive Blackplate anodes and a side getter.
The TAD 6L6GC-STR Blackplate™ and the TAD 6L6WGC-STR Blackplate™ feature TAD’sexclusive black-plate designs, gold grid wire, double getter construction, no-noise filaments and1.2mm thick heavy duty glass. This tube is approximately 80mm high (without pins) and canreplace 5881 and 6L6WGB tubes.
The newly reissued tubes feature the original design and raw materials from old stock, availablein limited quantities as long as the old stock raw materials are available. They’re the perfectchoice for vintage tweed and black panel amps such as the 1960 Bassman, Twin, Showman orSuper Reverb. The complex midrange and sweet heights are a class of its own. The TAD6L6WGC-STR is recommended for classic tone with warm cleans and rich, sweet mids whenpushed – and it’s great for fat jazz or blues tones.
- Delivers classic sound of the 1950s and ‘60s - excellent tone, maximum lifespan
- Tube Type: 6L6/5881
- Socket: 8 Pin(Octal)
- Identical construction, even tighter tolerances with improved production quality
The TAD 6L6GC-STR Blackplate™ and the TAD 6L6WGC-STR Blackplate™ are each priced at$48 (does not include VAT) / €46.50 (includes VAT) and are available at tubeampdoctor.com.
In challenging times, sometimes elemental music, like the late Jessie Mae Hemphill’s raucous Mississippi hill country blues, is the best salve. It reminds us of what’s truly essential––musically, culturally, and emotionally. And provides a restorative and safe place, where we can open up, listen, and experience without judgement. And smile.
I’ve been prowling the backroads, juke joints, urban canyons, and VFW halls for more than 40 years, in search of the rawest, most powerful and authentic American music. And among the many things I’ve learned is that what’s more interesting than the music itself is the people who make it.
One of the most interesting people I’ve met is the late Jessie Mae Hemphill. By the time my wife, Laurie Hoffma, and I met Jessie Mae, on a visit to her trailer in Senatobia, Mississippi, she’d had a stroke and retired from performing, but we’d been fortunate to see her years before at the New Orleans Jazz & Heritage festival, where she brought a blues style that was like quiet thunder, rumbling with portent and joy and ache, and all the other stuff that makes us human, sung to her own droning, rocking accompaniment on an old Gibson ES-120T.
To say she was from a musical family is an understatement. Her grandfather, Sid, was twice recorded by Alan Lomax for the Library of Congress. While Sid played fiddle, banjo, guitar, harmonica, keyboards, and more, he was best known as the leader of a fife-and-drum band that made music that spilled directly from Africa’s main artery. Sid was Jessie Mae’s teacher, and she learned well. In fact, you can see her leading her own fife-and-drum group in Robert Mugge’s wonderful documentary Deep Blues(with the late musician and journalist Robert Palmer as on-screen narrator), where she also performs a mournful-but-hypnotic song about betrayal—solo, on guitar—in Junior Kimbrough’s juke joint.
That movie, a 1982 episode of Mr. Rogers’ Neighborhood (on YouTube) where she appears as part of Othar Turner’s Gravel Springs fife-and-drum band, and worldwide festival appearances are as close as Jessie Mae ever got to fame, although that was enough to make her important and influential to Bonnie Raitt, Cat Power, and others. And she made two exceptional albums during her lifetime: 1981’s She-Wolf and 1990’s Feelin’ Good. If you’re unfamiliar with North Mississippi blues, their sound will be a revelation. The style, as Jessie Mae essayed it, is a droning, hypnotic joy that bumps along like a freight train full of happily rattling box cars populated by carefree hobos. Often the songs ride on one chord, but that chord is the only one that’s needed to put the music’s joy and conviction across. Feelin’ Good, in particular, is essential Jessie Mae. Even the songs about heartbreak, like “Go Back To Your Used To Be” and “Shame on You,” have a propulsion dappled with little bends and other 6-string inflections that wrap the listener in a hypnotic web. Listening to Feelin’ Good, it’s easy to disappear in the music and to have all your troubles vanish as well—for at least as long as its 14 songs last.“She made it clear that she had a gun—a .44 with a pearl handle that took up the entire length of her handbag.”
The challenge I’ve long issued to people unfamiliar with Jessie Mae’s music is: “Listen to Feelin’ Good and then tell me if you’re not feeling happier, more cheerful, and relaxed.” It truly does, as the old cliché would have it, make your backbone slip and your troubles along with it. Especially uptempo songs like the scrappy title track and the charging “Streamline Train.” There’s also an appealing live 1984 performance of the latter on YouTube, with Jessie Mae decked out in leopard-print pants and vest, playing a tambourine wedged onto her left high-heel shoe––one of her stylish signatures.
Jessie Mae was a complex person, caught between the old-school dilemma of playing “the Devil’s music” and yearning for a spiritual life, sweet as pecan pie with extra molasses but quick to turn mean at any perceived slight. She also spent much of her later years in poverty, in a small trailer with a hole in the floor where mice and other critters got in. And she was as mistrustful of strangers as she was warm once she accepted you into her heart. But watch your step before she did. On our first visit to her home, she made it clear that she had a gun—a .44 with a pearl handle that took up the entire length of her handbag and would make Dirty Harry envious.
Happily, she took us into her heart and we took her into ours, helping as much as we could and talking often. She was inspiring, and I wrote a song about her, and even got to perform it for her in her trailer, which was just a little terrifying, since I knew she would not hold back her criticism if she didn't like it. Instead, she giggled like a kid and blushed, and asked if I’d write one more verse about the artifacts she’d gathered while touring around the world.
Jessie Mae died in 2006, at age 82, and, as happens when every great folk artist dies, we lost many songs and stories, and the wisdom of her experience. But you can still get a whiff of all that––if you listen to Feelin’ Good.