
Can an entry-level modeler hang with the big dogs?
Excellent interface. Very portable. Nice modulation tones.
Some subpar low-gain dirt sounds. Could be a little more rugged.
$399
HeadRush MX5
headrushfx.com
The allure of portability and sonic consistency has become too much to ignore for some guitarists, making smaller digital modelers more appealing than ever.
Since 2017, HeadRush primarily built super-versatile floor units aimed at players that like large-format, feature-packed boards. The new MX5 is a clear downsizing move. It's considerably smaller than the company's Looperboard and Gigboard models, but it also includes features not typically seen on setups in this price range.
The Power of Touch
At about 3.5 pounds, the MX5 is made for players who don't like a complicated or back-breaking load in. On the back side of the unit, you'll find an input, stereo outputs, an effects loop, an additional expression pedal input, headphone output, aux input, and MIDI, and USB ports. These options are standard on most modeling units, but kudos are due to HeadRush for retaining these features while keeping the price low and the size so small.
All of HeadRush's boards feature a full-color LCD display, and the MX5's 4" display is just big enough to be readable and effective. Naturally, larger displays make it easier to tweak rig and effect settings on the fly. But given the small size and price of the MX5, they've accomplished a lot with a little. Using other modelers, I tend to default to programming presets via a standalone editor. But the gurus at HeadRush made the MX5's interface very intuitive and maintained a balance between function and complexity. There are just enough parameters to give you plenty of control without falling into option paralysis.
The amp emulations ranged from good to near perfect.
When you open a blank preset, you're able to load up to 11 different elements to your virtual signal path. With a single touch of the signal path button, you can call up one of three templates. Two of these offer parallel paths for more complex setups. Because the MX5 has just three footswitches, I wanted to start with a straight-ahead setup that would cover clean, crunch, and high-gain. My rig started with a JTM45-style head feeding a 4x12 cab simulation and miked with a virtual SM57. From there, I added a "green" distortion, a full-range boost, '80s-style delay, and a plate reverb.
Sounds To Start With
Headrush's core technology is derived from a significantly enhanced, evolved, and reconstructed Avid Eleven Rack processor.. The delays and reverbs in the Avid system were excellent, and they've carried over nicely to the MX5. As with many modelers, distortion can be the toughest nut to crack, and in the MX5, the low- and mid-gain dirt emulations lack a little nuance and depth. High-gain distortions, however, were much more convincing.
Many modelers come with effect presets that may not immediately match your needs. But the MX5 does something that I haven't seen before: It loads up several presets for each effect. So, when I dropped a reverb in my signal chain, the screen provided the means to edit specific parameters as well as alternative presets that were ideal jumping-off points. This feature adds a lot of flexibility on the fly. Preset switching, by the way, is gapless and you have the option to program in delay and reverb tails and spillover.
With 46 amps and 63 effectsānot to mention all the cab and mic optionsāit would take a novel to describe every sound available in the MX5. But generally speaking, the amp emulations ranged from good to near perfect (particularly the classic rock half stacks). Many modulation effects were standouts as well. And if there's an analog pedal in your collection that isn't represented in the HeadRush's library, the effects loop makes it easy to work the real deal into the mix.
Hit Record!
Most modelers have robust recording features these days. The MX5 is no different. You can record directly to your DAW of choice with a single USB cable. (The USB connection is also used for firmware upgrades, backing up presets, and loading loops and IRs.) All the clips you hear with the online version of this review were recorded direct into Logic Pro X without any additional sweetening. While not essential, a good audio interface is a good thing to have if you want to get the most value from the HeadRushāenabling you to easily move from re-amping duties to fine tuning tones within a mix, or jamming along with a backing track.
The Verdict
At just a hair under $400, the MX5 sits comfortably on the affordable side of the contemporary all-in-one floor processor price spectrum. It's an even better value when you consider the built-in expression pedal. The unit is powerful and stable, and I never had to worry about DSP power when using processing-intensive effects. Although the distortion and overdrive emulations weren't head spinning, there were plenty of amps and effects that authentically copped the sound and feel of their analog counterparts. The MX5 might not have the sonic depth of more expensive units, but pound-for-poundāand at this priceāit more than holds its own while offering the very valuable convenience that comes from a small package.
The veteran Florida-born metalcore outfit proves that you donāt need humbuckers to pull off high gain.
Last August, metalcore giants Poison the Well gave the world a gift: They announced they were working on their first studio album in 15 years. They unleashed the first taste, single āTrembling Level,ā back in January, and set off on a spring North American tour during which they played their debut record, The Opposite of December⦠A Season of Separation, in full every night.
PGās Perry Bean caught up with guitarists Ryan Primack and Vadim Taver, and bassist Noah Harmon, ahead of the bandās show at Nashvilleās Brooklyn Bowl for this new Rig Rundown.
Brought to you by DāAddario.Not-So-Quiet As a Mouse
Primack started his playing career on Telecasters, then switched to Les Pauls, but when his prized LPs were stolen, he jumped back to Teles, and now owns nine of them.
His No. 1 is this white one (left). Seymour Duncan made him a JB Model pickup in a single-coil size for the bridge position, while the neck is a Seymour Duncan Quarter Pound Staggered. He ripped out all the electronics, added a Gibson-style toggle switch, flipped the control plate orientation thanks to an obsession with Danny Gatton, and included just one steel knob to control tone. Primack also installed string trees with foam to control extra noise.
This one has Ernie Ball Papa Hetās Hardwired strings, .011ā.050.
Here, Kitty, Kitty
Primack runs both a PRS Archon and a Bad Cat Lynx at the same time, covering both 6L6 and EL34 territories. The Lynx goes into a Friedman 4x12 cab thatās been rebadged in honor of its nickname, āDonkey,ā while the Archon, which is like a ārefined 5150,ā runs through an Orange 4x12.
Ryan Primackās Pedalboard
Primackās board sports a Saturnworks True Bypass Multi Looper, plus two Saturnworks boost pedals. The rest includes a Boss TU-3w, DOD Bifet Boost 410, Caroline Electronics Hawaiian Pizza, Fortin ZUUL +, MXR Phase 100, JHS Series 3 Tremolo, Boss DM-2w, DOD Rubberneck, MXR Carbon Copy Deluxe, Walrus Slo, and SolidGoldFX Surf Rider III.
Taverās Teles
Vadim Taverās go-to is this cherryburst FenderĀ Telecaster, which he scored in the early 2000s and has been upgraded to Seymour Duncan pickups on Primackās recommendation. His white Balaguer T-style has been treated to the same upgrade. The Balaguer is tuned to drop C, and the Fender stays in D standard. Both have DāAddario strings, with a slightly heavier gauge on the Balaguer.
Dual-Channel Chugger
Taver loves his 2-channel Orange Rockerverb 100s, one of which lives in a case made right in Nashville.
Vadim Taverās Pedalboard
Taverās board includes an MXR Joshua, MXR Carbon Copy Deluxe, Empress Tremolo, Walrus ARP-87, Old Blood Noise Endeavors Reflector, MXR Phase 90, Boss CE-2w, and Sonic Research Turbo Tuner ST-200, all powered by a Voodoo Lab Pedal Power 2 Plus.
Big Duff
Harmonās favorite these days is this Fender Duff McKagan Deluxe Precision Bass, which heās outfitted with a Leo Quan Badass bridge. His backup is a Mexico-made Fender Classic Series ā70s Jazz Bass. This one also sports Primack-picked pickups.
Rental Rockers
Harmon rented this Orange AD200B MK III head, which runs through a 1x15 cab on top and a 4x10 on the bottom.
Noah Harmonās Pedalboard
Harmonās board carries a Boss TU-2, Boss ODB-3, MXR Dyna Comp, Darkglass Electronics Vintage Ultra, and a Voodoo Lab Pedal Power 2 Plus. His signal from the Vintage Ultra runs right to the front-of-house, and Harmon estimates that that signal accounts for about half of what people hear on any given night.
The Future Impact V4 is an incredibly versatile pedal with an exceptional range of sounds. In addition to producing synthesizer sounds such as basses, leads and pads, it can function as an octaver, chorus, flanger, phaser, distortion, envelope filter, traditional wah-wah, tremolo, reverb, etc., and even has a built-in tuner. It can potentially replace an entire pedalboard of dedicated single-effect pedals.
The very powerful signal processor of the Future Impact V4 is able to replicate the various oscillator, filter, amplifier and envelope generator blocks found in classic synthesizers. In addition, it contains signal processing blocks more traditionally used for processing the sound of an instrument such as a harmonizer block and audio effects such as chorus, distortion and EQ. These architectures complement each other in a very flexible way.
Setting the standard for the bass guitar synth pedals since 2015, together with an enthusiastic community and long line of great artists, the Future Impact V4 is the guitar synth platform for the next decade.
His credits include Miles Davisā Jack Johnson and Herbie Mannānext to whom he performed in Questloveās 2021 documentary, Summer of Soulāand his tunes have been covered by Santana and the Messthetics. But itās as a bandleader and collaborator where Sharrock cut his wildest recordings. As groundbreaking as Sharrockās music could be, his distorted tone and melodic tunes helped bring rock listeners into the jazz tent. Our callers let us know how much Sharrock meant to them and why heās one of the ātop guys of all time.ā
Belltone Guitars has partnered Brickhouse Toneworks to create a one-of-a-kind, truly noiseless Strat/Tele-tone pickup in a standard FilterāTron size format: the Single-Bell pickup.
The Single-Bell by Brickhouse Toneworks delivers bonafide single-coil Strat and Tele tones with the power of a P-90 and no 60-cycle hum. Unlike typical stacked hum-cancelling designs, Brickhouse Toneworks uses a proprietary āsidewindā approach that cancels the 60-cycle hum without sacrificing any of the dynamics or top-end sparkle of a Fender-style single coil.
Get the best of both worlds with clear bell-like tones on the neck pickup, signature quack when combining the neck and bridge pickups, and pristine twang in the bridge position backed with the fullness and power of a P-90. Push these into overdrive and experience the hallmark blues tone with plenty of grit and harmonic sustain ā all with completely noiseless performance.
Key Features of the Single-Bell:
- Cast Alnico 5 Magnet, designed to be used with 500k pots
- Voiced to capture that signature Fender-style single coil tone without the 60-cycle hum
- Lightly potted to minimize squeal
- Made in the USA with premium quality materials
The retail price for a Bridge and Neck matching set is $340.00 and theyāre available directly and exclusively through BelltoneĀ® Guitars / Brickhouse Toneworks at belltoneguitars.com.