A backwards Strat, a radical Jetsons-y guitar, Def Leppard's secret weapon, and more pedals than currently listed on Reverb fill this YouTuber's tone lounge.
He's played with Santana, Stevie Wonder, and a host of other greats, and his lessons and demos on YouTube have garnered more than 15-million viewsāso there's a good chance you already know this Nashville-based guitarist.
Now, take a look inside his studio and eyeball an impressive armada of guitars, amps, and effects with PG's John Bohlinger.
[Brought to you by D'Addario XPND Pedalboard: https://www.daddario.com/XPNDRR]
Guitars
(Ronquillo has a lot of 6-strings, but we narrowed down this Rundown to a few favorites that do most of the heavy lifting.)
Pretty in Pink
This Nash S-81 features an EMG SL20 Pro Series Steve Lukather signature set of pickups, and it's strung with a D'Addario NYXL .010ā.046 set.
Original Senn
This is one of Nashville builder Jeff Senn's Fullerton S-styles, with Lollar pickups, a Vega-Trem tremolo, and a set of D'Addario NYXL .010ā.046s.
In for the Pun
Yes, Senn thinks this is funny, too.
Bet on the Knaggs
Here's a Doug Rappaport signature Knaggs Kenai DR, featuring a Seymour Duncan Slash neck pickup and a Duncan Custom Shop '78 in the bridge. Ronquillo added a String Butler tuning stabilizer. Once again: D'Addario NYXLs, .010ā.046.
Photo Finish
This Novo Custom Serus J features a one-of-a-kind "Ron-Tealio" finish with Brandonwound P-90s. Same D'Addario NYXLs. Cool speed dials and whammy bar tip, yes?
S-Style with a Twist
And now for something completely different, here's an RS Guitarworks Twisted. The guitar has an alder body and a rosewood neck, with Fralin Woodstock pickups. RJ uses a Stringjoy Hendrix set: .010, .013, .015, .026, .032, and .038. The lighter G string supposedly provides a more balanced tone.
Make Way for Junior
Here's another axe with history in its genes: a Grez Mendocino Junior. In classic Junior form, it has a 1-piece body, but it is made from reclaimed old-growth redwood. The neck is solid Honduran mahogany with a Macassar ebony fretboard. The pickup is a dog ear Wolftone MeanerP90. This one sports RJ's usual D'Addario NYXLs.
A BarneyāNot the Purple One
This cherry sunburst 1964 Gibson Barney Kessel Custom is all stock, replete with bow-tie inlays and elegant binding. For a bit more beef, it's strung with Thomastik-Infeld George Benson strings: .012, .016, .020w, .028, .039, and .053. Note the cool badge at the bottom of the tailpiece.
AmpsāLoud City
RJ has a lot of amps, so we narrowed it down to those in "Tonehenge," the part of his studio that houses his amplifiers that are in current heavy rotation.
Morgan Horsepower
Want classic American amp tone? Here's your pony. This 35W head uses two 5881 power tubes, two 12AV7s, and a GZ34 rectifier.
Yes, Suhr
This Pete Thorn signature has three channels, an effects loop, four EL-34 power tubes, six 12AX7 preamp tubes, and is set up for MIDI control.
Sibling Revelry
This Friedman Twin Sister uses 40 watts to go for classic British tone. It's inspired by the Marshall JTM 45. Each channel has a bright switch and a 3-position gain switch, and there are two 5881s and five 12AX7s lurking inside.
Sultan of String
With a nod to Howard Dumble, here's Amplified Nation's Steel String Sultanāa 25 watt version of this custom build. As you'd expect, the Boston-area company has packed it chock full of top-of-the-line components, including orange drop and NTE caps, and Classic Tone and Heyboer transformers.
White Box of Rock
Helping Ronquillo have even more options when it comes to recording and routing, he employs this Two Notes Torpedo Captor X Stereo Reactive Load Box.
The Chains We Forge in Tone
RJ is a pedal guy. His rig flows through a series of boards, but the signal from his guitar firsts lands here, at a JAM Pedals Wahcko wah and a Sabbadius Funky-Vibe Fillmore East edition.
Like a Peach
From there, the signal hits his "Fuzz Board," which includes a One Control Iguana Tail Loop 2 switcher feeding a King Tone MiniFuzz germanium, a Wes Jeans Texas Fuzz silicon fuzz face clone, an Expresso FX Fuzz Bender Mk 1, a Wren and Cuff Small Foot Box of War muff-style, a J.Rockett .45 Caliber overdrive, and an MXR CAE buffer.
Switch It Up
Since there are three more pedalboards in RJ's setup, this Boss ES-5 Switcher is sensible
The Main Vein
A lot goes down here. When that Boss switcher sends the guitar signal this way, it encounters a Peterson StroboStomp HD tuner, a DigiTech Drop, a DryBell Unit 67 EQ/boost/comp, a King Tone Octaland mini octave pedal, an AnalogMan Sun Face, a Pogo Pedals Zen Ray overdrive, a Nobels ODR-1, his signature Mythos Susmaryosep! boost/overdrive/echo, an LPD Eighty 7 distortion, a Vertex Boost, a Roland EV-5 expression pedal, a GFI Synesthesia multi-modulator, JAM's Harmonius Monk tremolo, and a Boss FRV-1 '63 Fender Reverb.
Enter to win pedals from RJ's main board seen above!
Next!
Currently to the right of the main board, these: a Voodoo Lab Micro Vibe, Fulltone's Ultimate Octave, a King Tone Duellist dual overdrive, MXR's FET Driver, and a LPD Seventy4 overdrive.
But Wait, There's More
You ain't seen nuthin' yet. Okay, you've seen a lot. But there's also, to the left of the main board: a Mythos High Road mini fuzz, a Beetronics Vezzpa Octave Stinger Fuzz, a Cornerstone Gladio dual overdrive. a Vertex Ultra Phonix Overdrive, and a Vertex Ultra Phonix HRM overdrive. He uses Truetone, Cioks, and T-Rex power supplies.
And Even More!!
Another board is home to four filthy boxesāa Metropoulos Supa Boost, Hudson Electronics Broadcast-AP preamp (Ariel Posen signature), Lovepedal Tchula Boost, and an Analogman Beano Boost.
- Eastwood Airline H78 Review - Premier Guitar āŗ
- Eastwood Guitars Releases the California Rebel - Premier Guitar āŗ
- On Bass: Advice for Guitarists ⦠from a Bassist - Premier Guitar āŗ
- Do you want to WIN gear from RJ Ronquillo's Pedalboard? āŗ
- Rig Rundown: Dragged Under's Ryan "Fluff" Bruce - Premier Guitar āŗ
- YouTube Guitar Sensation RJ Ronquillo on The Ventures' Influence - Premier Guitar āŗ
- VegaTrem VT2 ND Teletrem Demo | NAMM 2023 - Premier Guitar āŗ
- Sabbadius Tiny-Vibe 69 Review - Premier Guitar āŗ
- Thomastik-Infeld Launches Infeld Bronze Acoustic Strings āŗ
A satin finish with serious style. Join PG contributor Tom Butwin as he dives into the PRS Standard 24 Satināa guitar that blends classic PRS craftsmanship with modern versatility. From its D-MO pickups to its fast-playing neck, this oneās a must-see.
PRS Standard 24 Satin Electric Guitar - Satin Red Apple Metallic
Standard 24 Satin, Red App MetIntroducing the new Firebird Platypus, a tribute to the rare transitional models of 1965.
In early 1965, the original Firebird design transitioned through several different iterations. One of the significant transitions that occurred flipped the headstock to the Non-Reverse shape. Unlike the original Reverse Firebird headstock design, which featured a two-layered headstock with a holly veneer, the new headstock was flat, like the bill of a platypus.
Mahogany body and glued-in mahogany neck
The Firebird Platypus has a mahogany body with the appearance of a traditional neck-through Reverse Firebird body for that classic Reverse Firebird appearance, while the neck of the Firebird Platypus uses glued-in, set neck construction like the Les Paul and SG and delivers outstanding sustain and resonance.
Platypus transitional headstock design
The headstock features the flat, transitional style āplatypusā design that was found only on rare models from the 1965 transitional period when the Firebird was gradually switching over from the features found on the original models that were released in 1963 to the features that were used for the later Non-Reverse Firebird models.
Firebird humbucker pickups
Itās outfitted with two Firebird humbucker pickups. These pickups are equipped with Alnico 5 magnets and have a unique sound that is not quite like any other humbucking pickup, with unmatched clarity, chime, and bite. They sound great for both clean and overdriven tones.
Exclusive Cherry Sunburst finish
This exclusive Cherry Sunburst finish is available only on Gibson.com and at the Gibson Garage.
For more information, please visit gibson.com.
The exquisite BilT Brothers collaborative guitar: a Frank Brothers Ultra Light in BilT eggplant sparkleburst with Arcane 3x3 Gold Foil Humbuckers and loaded with a Caroline Custom Cannonball Distortion.
This forward-thinking custom guitar commissioned by our columnist makes a special case for partnership in the guitar building community.
Owning a guitar shop, your brain is full of to-do lists, questions, and plenty of compulsive thoughts over details. And when you run a shop that specializes in custom builds that you spec out from boutique companies, the ideas for these guitars often come at the most random times of day (and night). While I donāt subscribe to the notion of fate, the following makes a case for its existence.
It was like any other random day at work: We had customers coming in, items shipping out, services on the bench. I was simultaneously working on a pedalboard for a customer and making plans with some vendors. I was on the phone with Brandon Darner of BilT Guitars when DHL dropped off our latest Frank Brothers guitar. Now, Iām never shy about talking up builds from any of our vendors. Specāing guitars for our shop, seeing their execution exceed my expectations, and then getting it into the hands of its new owner is one of my absolute favorite parts of my job. So, naturally I mentioned that we just got a new Frank Brothers in. Brandon told me how much he loved their stuffāsort of a āgame recognizing gameā kind of thing.
After we unboxed the guitar, I called Tim Frank to let him know how we continue to be impressed with their work and how much we loved the new arrival. I also mentioned Brandon had some very nice things to say about their work. Timās response was something like, āOh wow! Thatās really cool. Their stuff is amazing and we have a lot of respect for those guys.ā At first, I thought he was just being polite, but Iāve gotten to know him pretty well. I knew that the compliment and sentiment was genuine and past the point of his wonderful Canadian pleasantness. One thing led to another, and I started a group text. Very quickly, they became friends. In fact, Brandon even ordered a Frank Brothers shortly after the introduction.
The Frank Brothers and BilT team, left to right: Tim Frank, Tim Thelen (BilT), Nick Frank, and Brandon Darner (BilT).
My last call of the day was to Philippe Herndon from Caroline Guitar Company. As we talked, he was glowing about the pedal building community and how friendly and collaborative it is, and obvious questions popped into my head: āWhy arenāt guitar companies like that?ā āWhy canāt we do a collab guitar?ā
Long story extremely short, with tons of excitement, I got Brandon and Tim on the phone and proposed the idea of doing a guitar together. Without hesitation, the response from both was āHell yeah, letās do it!ā and it was time for us to spec it. We decided on a Frank Brothers Ultra Light. BilT would apply their world-class fit/finish as well as their signature effects treatment. I picked my favorite finish in the BilT repertoire called eggplant sparkleburst, selected Arcane 3x3 Gold Foil Humbuckers, and tapped Philippe on the shoulder to ask if he had any Custom Cannonball Distortionsāthe first pedal I bought from Caroline in 2013āthat he could provide for the build, to which he happily obliged.
A year or so later, the BilT Brothers was born. Of course, it is exceptional beyond words and is a true testament to the results of these incredible companies working together to produce something truly remarkable. We decided, with custom shirts and all, to proudly debut our creation at Fretboard Summit in Chicago. The reaction from everyone exceeded our expectations and showed me that the level of mutual respect and admiration in this business can lead to phenomenal results.
This project has opened a lot of doors that Iām not sure anyone knew existed. For me, the most exciting part of all of this is the fact that, like the smaller pedal companies, there is an actual community here filled with like-minded, pure enthusiasts who also happen to be master craftsmenāand who truly geek out over each otherās work.
Never was this more evident than at the Wood Wire Volts show this January, where not only did the BilT and Frank Brothers crews travel and stay together, they were also often in deep chats with fellow luminaries Sacha Dunable (Dunable Guitars) and Carlos Lopez (Castedosa Guitars), discussing the trade, the work, and ideas for the future. If the vibe is any indicator, we can safely assume that while the BilT Brothers was, by all accounts, the first ever collab guitar of its kind, it will not be the last.
This entire experience is reminiscent of the DIY community ethos that Iāve clung to and has inspired me for most of my life. There is a clichĆ© about the journey being greater than the destination, and while the destination in this case is one of the finest guitars Iāve ever laid my hands on, Iād have to say it holds true
Introducing the new Gibson Acoustic Special models, handcrafted in Bozeman, Montana, featuring solid wood construction, satin nitrocellulose lacquer finishes, and L.R. Baggs electronics.
Solid Wood Construction
Each of the three Acoustic Special models from Gibson are crafted using solid mahogany for the back and sides, solid Sitka spruce for the tops, utile for the necks, and rosewood for the fretboards for a sound that will only get better and better as they age.
Satin Nitrocellulose Lacquer Finishes
All three Gibson Acoustic Special models are finished in satin nitrocellulose lacquer for a finish that breathes, ages gracefully, and lets the natural beautyāboth in sound and appearanceāof the quality tonewoods come through.
L.R. Baggs Electronics
The Gibson Acoustic Special guitars come with L.R. Baggs Element Bronze under-saddle piezo pickups and active preamps pre-installed, making them stage and studio-ready from the moment you pick them up.
For more information, please visit gibson.com.