The blues-rocker takes us inside his remarkable gear sanctuary to show off classic Gibsons, a heaping helping of Hiwatts, and a bunch of rare Pete Cornish pedals.
Facing a mandatory shelter-in-place ordinance to limit the spread of COVID-19, PG enacted a hybrid approach to filming and producing Rig Rundowns. This is the 42nd video in that format.
For nearly two decades, Caleb āBonesā Owens has been fulfilling other artistsā and bandmatesā visions. He was a member of moody hard rockers The Becoming and longtime collaborator with dirty-south rapper Yelawolf. Other notable credits include working alongside Mikky Ekko, composing credits for Rose Falcon and Mike Mains & the Branches, and other contributions to Nashville-based acts. Now primed to take the wheel on his own musical excursion, Bonesā journey starts with his brand-new, self-titled debut album via Black Ranch Records/Thirty Tigers.
Just before releasing the his tight, rollicking 12-song collection, the frontman guitarist (and faux bassist) virtually welcomed PGās Chris Kies into his Tennessee home jam space (that could double as a Kustom Amplification museum).
In this episode, we find out why Gibsons just fit Bones Owens (and his sound), he explains his Hiwatt-heavy and Echopark-rich amp pairings, and details the Pete Cornish-heavy pedalboards that enable him to punch with the guitar and rumble like a bass.
āThis is one is special to me,ā admits Bones Owens. āItās been my main touring guitar for the last few years because itās a Swiss-Army knife.ā Above youāll see his 2002 Gibson ES-355. If you recognize it from a previous Rig Rundown, youāre not wrong because it belonged to Gusterās Luke Reynolds before Owens bought it off him. Reynolds upgraded the 355 with Lollar pickupsāan Imperial humbucker in the bridge, and a Charlie Christian in the neckāreplaced the nut, added a Tune-o-matic bridge, a Bigsby, and swapped in Grover Vintage Deluxe tuners. Since purchasing it, Owens hasnāt done anything to the instrument and even hesitates to re-string it. Speaking of strings, Owens used to beat himself up with .012s but now loosens up with Ernie Ball Slinky .010s for most of his instruments.
A close-up of Owens' 2002 Gibson ES-355.
Owensā favorite over quarantine has become this 2018 Gibson ES-355 āBlack Beautyā that he picked up at Nashville guitar store Rumble Seat Music. It was aged by Rock N Roll Relics and was enhanced with Montyās PAF pickups.
A close-up of Owen's 2018 Gibson ES-355 āBlack Beautyā.
Here is Bonesā cherry 2015 Gibson Custom Collectorās Choice 1959 Les Paul Standard R9. While he mostly sticks to the bridge pickup, Owens says this āburst begs to be in the neck position thanks to its warm alnico-III Custom Buckers.
A close-up of Bones' 2015 Gibson Custom Collectorās Choice 1959 Les Paul Standard R9.
For the oddball lovers, Owens busted out his 1972 Gibson Les Paul Recording singlecut. Before he bought the weirdo from J Gravity Strings in St. Louis, someone gave it the Ace Frehley treatment and dropped in three DiMarzio Super Distortions and stripped out all the crazy original wiring.
A close-up of his 1972 Gibson Les Paul Recording singlecut.
Meet āAshtray,ā Owensā beloved 2000s Gibson Firebird non-reverse reissue (similar to the original run from mid-ā65 through 1969) that is loaded with three mini-humbuckers. The nickname stems from the cigarette stench caked into the guitar when he bought it off a fine southern gentleman at an Alabama truck stop.
A close-up of Bones' 2000s Gibson Firebird non-reverse reissue.
The only non-Gibson in Owensā Rundown is actually a licensed Gibson copy. Banker Custom Guitars is one of select few luthier shops that have been handpicked and authorized by Gibson to faithfully recreate their iconic instruments. Above is Bankerās ā58 V that has a period-correct two-piece korina body and neck, Indian rosewood fretboard, vintage-specific brass string plate, brad nails, and ferrules, and it came loaded with a set of OX4 Hot Duane PAFs.
A close-up of his Banker ā58 V.
For most of todayās Rundown, we were hearing this Echopark Vibramatic 4T5A. Owens mentions it is loosely based on a brown-panel Fender, but it does have a voice switch that kicks it into an earlier JTM45-style tone. This is supposedly one of 10 4T5A heads ever built.
The Vibramatic head runs into a matching Echopark cab that has three ceramic Warehouse Speakersātwo 10" up top and a 12" on the bottom.
For a ābassā tone during his gritty blues-rock duo gigs, Owens will run this ā90s (Audio Brothers) Hiwatt Custom 100 DR103 alongside the Vibramatic. The DR103 rocks through an early ā70s Marshall 2034 cabinet. In a previous life, the 2034 was an 8x10 but now itās home to two 15s.
Just a fraction of Bones' immense amp collection.
Owensā signal out of the guitar hits his first board thatās dedicated to his ābassā sound that colors the DR103. The Spaceman Effects Saturn V Harmonic Booster is an always-on, no-matter-what pedal. Then it hits the Pete Cornish A/B/C amp splitter box. Out of that it runs into the Electro-Harmonix Micro POG (just for octave down) and then goes through a ātall fontā EHX Big Muff that was rehoused by Mike Hill. From there, he has the Tech 21 SansAmp Bass Driver/DI. If things are cooking onstage, Owens will leave the Saturn V, Micro POG, Big Muff, and SansAmp all on, all the time.
The B signal path is much shorterāit incorporates the Echopark Echodriver that awakens the Echopark Vibramatic 4T5A.
(Typically, the C patch would hit a third amp and handle the bulk of effects, but for at-home-recording purposes, Owens routed all the stomps through the Echopark head.) Before jumping over to the second board on the left, the C path routes through the Cornish TB-83 Extra Treble Booster. Then we have plethora of Pete Cornish pedalsāNG-3 (āimminent amp deathā fuzz), a SS-3 (overdrive/distortion) & P-2 (distortion) housed together, CC-1 (boost/overdrive) that uses two fixed, low-gain, soft-clipping stages, and a NB-3 (linear boost). The other noisemakers and rebel rousers at Owensā feet include a silver Klon Centaur, Endangered Audio Research AD4096 Analog Delay, a Skreddy Pedals Skreddy Echo, a JHS-modded Boss TR-2 Tremolo (rehoused by PG columnist Barry OāNeal over at XTSāXACT Tone Solutions), and in the top left is a Toneczar Effects Halophaze.
Click below to listen wherever you get your podcasts:
D'Addario Pro Plus Capo:https://www.daddario.com/ProPlusCapoRR
Featuring Bluetooth input, XLR inputs, and advanced amplifier platform, the KC12 is designed to offer exceptional sound quality and versatility for a wide range of applications.
The KC12 is a first-of-its-kind, 3-way, 3000-watt active loudspeaker system encompassing the visual aesthetic of a column loudspeaker while surpassing the acoustic performance of conventional designs. Simple and easy to deploy, the elegant KC12, available in black and white, is ideal for a wide range of customers and applications from solo entertainers, musicians and bands, mobile entertainers and DJs to corporate AV, event production, and static installations.
Column-style portable loudspeaker systems are most often put into service due to their unobtrusive form factor. However, typical designs lack clarity and definition, particularly when pushed to high output levels, forcing the user into a form-over-function compromise. Solving this common dilemma, the KC12 cleverly utilizes a 3-way design featuring QSCās patented LEAFā¢ waveguide (first introduced in L Class Active Line Array Loudspeakers) combined with a true 1-inch compression driver, two 4-inch midrange drivers, and a high output 12-inch subwoofer, while still maintaining the desired, elegant appearance of a ācolumnā system. The KC12 produces an outstanding full-range horizontal coverage of 145 degrees and 35 degrees of audience-directed vertical coverage with clean and natural sound at all output levels.
The system features three inputs: a Bluetooth Ā® input combined with a 3.5 mm TRS stereo input, as well as two combo XLR inputs (Mic/Line/Hi-Z and Mic/Line/+48 V), with independent, assignableFactory Presets for each XLR input, making it ideal for small events where two microphones are needed for different uses. The rear panel incorporates a multi-function digital display, offering control and selection of several loudspeaker functions, including Global Parametric EQ, Subwoofer level, Presets and Scenes, Bluetooth configuration, Delay (maximum of 200 ms), or Reverb. Bluetooth functionality also provides True Wireless Stereo (TWS), which ensures low latency pairing between the music source and both left and right loudspeakers simultaneously.
Additionally, the KC12 can be deployed with or without its lower column pole, making the system ideally suited for utilization on a floor, riser or raised stage. The system is backed by a 6-year Extended Warranty (with product registration).
āThe KC12 exquisitely resolves the form-over-function compromise that has frustrated users of this category of products since they made their market introduction over 20 years ago,ā states David Fuller, VP of Product Development, QSC Audio. āWith the benefit of time, experience, extensive customer research, and cutting-edge innovation, our talented design team has truly created something very different from the status quo ā not simply a differentiated product, but an overall better solution for the customer.ā
The feature set and performance characteristics of the KC12 are complemented by a new, advanced amplifier platform, first incorporated into the L Class LS118 subwoofer released this past October. Fuller adds, āAmong the platformās key attributes are layers of real-time telemetry and protection to ensure uninterrupted performance day after day, which is a foundational QSC brand attribute.ā
āJust like our first K Series reset the bar for powered loudspeakers, elevating customersā expectations for performance, quality, reliability, usability, and professional appearance, the K Column offers a compelling, new approach to a familiar category and is destined to redefine the whole notion of what a ācolumnā is for users of portable PA products,ā states Ray van Straten, VPBrand, Marketing & amp; Training, QSC Audio. āThe product is simply stunning in its sleek and elegant appearance, but with the marketing tagline, āJust Listenā, weāre confident that once again, QSC sound quality will ultimately be the reason customers will quickly embrace the K Column as the next āNew Standardā in its category.ā
The QSC KC12 K Column carries a MAP price of $1,999.
For more information, please visit qsc.com.
This pedal is designed to offer both unique distortion qualities and a tonal palette of sonic possibilities.
At the heart of the Harvezi Hazze pedal is a waveshaper designed around a unijunction transistor - a relic from the early days of the semiconductor industry unearthed from the e-waste bins of flea markets in Tbilisi, Georgia, the Eastern European country's largest city.
The unijunction transistor offers unique properties allowing one simple component to replace a number of very complex devices. Therefore. depending on the operating mode, users can access a distortion, a limiter, a waveshaper and a generator - with smooth transitions among each of these.
The name "Harvezi Hazze" translates from Georgian as "a fault on the transmission line" or "signal jamming", and both the semantic and phonetic nature of these translations imply what users can expect: an impediment to the input signal, which can range from pleasant harmonic distortions to complete obliteration. The signal chain of Harvezi Hazze consists of an optical compressor with fixed parameters; a dual-mode distorting amplifier with either softer or harsher clipping; a waveshaper built around a unijunction transistor; and a tone stack section designed to tame these sonic building blocks.
Signal flow and controls
Following the input, the signal goes to the Compressor, Distorting Amplifier, Waveshaper, and then to the Tone Stack and output stages. Harvezi Hazze features six control knobs, a three-way switch and a footswitch.
- Gain Control: This controls the output amplitude of the signal in the distorting amplifier section. Depending on the position of the switch, the distortion introduced by this section is soft (with the switch in the left position) or more aggressive with an abundance of high harmonics (with the switch in the middle position).
- Spoil and Spread: This knob controls the operation of the unijunction transistor (waveshaper section). Spoil sets the point on the amplitude axis at which the wave will fold, and Spread sets the amplitude of the folding. The higher the Spread value, the more severe the distortion will be, while Spoil will change the timbre and response threshold. By adjusting Spoil, users can achieve various gating and cutoff effects; at low Spread values, distortion sounds are mixed into the clean sound.
- Tone: This knob adjusts the brightness of the sound. With higher values, higher harmonics become present in the signal.
- Three-way switch. This feature regulates either the distortion mode in the amplifier section (left and center positions), or turns on the total feedback mode (right position) when the values of all knobs begin to influence each other. In this position, effects occur such as resonance at certain frequencies and self-oscillation.
- Level knob: This controls the output volume of the signal.
- Footswitch: This routes the signal through the effect circuitry or from input to output directly (true bypass).
The array of switches on the side of the unit provides even further tonal options; the lower position of the switch enables the specific function:
- Tone Stack: Routes the signal through the tone stack section (Tone knob).
- Bass Boost: Enhances bass frequencies.
- Tone Mode: Changes the behavior of the Tone knob (tilt or lowpass).
- Notch Freq: Changes the central frequency of the filter.
- High Cut: Attenuates high frequencies.
- Compressor: Routes the signal through the compressor.
Harvezi Hazze is priced at ā¬290. To learn more, please visit https://somasynths.com/harvezi-hazze/.
Ibanez Blackout series acoustic guitars feature all-black aesthetic, high-quality electronics, and in-demand woods. Models include AEG721 with Fishman S-core pickups, AEWC621 with Ibanez AEQ-SP2 preamp, and TCY621 with Ibanez under-saddle pickup. With prices ranging from $249.99 to $399.99, these guitars offer a unique and stylish option for musicians.
Ibanez has unveiled its new Blackout series of acoustic guitars to their lineup. Inspired by the popular Iron Label series, these instruments feature an all-black aesthetic, including a matte black finish and black hardware. The Blackout series offers three distinct models: the AEG721 7-string acoustic-electric, the AEWC621, and the TCY621. Each model boasts in-demand woods, including a Spruce top, Sapele back and sides, and Macassar Ebony or Purpleheart for the fingerboard and bridge.
To complement their unique appearance, the Blackout guitars are equipped with high-quality electronics. The AEG721 and AEWC621 feature Fishmanās S-core pickups and Ibanez AEQ-SAP2 preamps, while the TCY621 utilizes an Ibanez under-saddle pickup and AEQ-2T preamp.
For more information, please visit ibanez.com.
AEG721
- AEG body
- 634mm/25" scale
- Spruce top
- Sapele back & sides
- Comfort Grip 3pc Nyatoh/Maple neck
- Macassar Ebony fretboard & bridge
- Black dyed Bone nut & saddle
- Black Die-cast tuners (18:1 gear ratio)
- FishmanĀ® S-core pickup
- Ibanez AEQ-SP2 preamp w/Onboard tuner
- Balanced XLR & 1/4" outputs
- Ibanez Advantageā¢ bridge pins
- D'AddarioĀ® XTAPB1253, plus .070 guage Phosphor Bronze
- String Gauge: .012/.016/.024/.032/.042/.053/.070
- Factory Tuning: 1E,2B,3G,4D,5A,6E,7B
- Recommended case: AEG10C/MAP: $169.99
- Finish: Blacked Out
LIST PRICE: $599.99
ESTIMATED STREET PRICE: $399.99
AEWC621
- AEWC body
- 634mm/25" scale
- Spruce top
- Sapele back & sides
- Comfort Grip Nyatoh neck
- Macassar Ebony fretboard & bridge
- Black Die-cast tuners (18:1 gear ratio)
- FishmanĀ® S-Core pickup
- Ibanez AEQ-SP2 preamp w/Onboard tuner
- Balanced XLR & 1/4" outputs
- Ibanez IACS6C coated strings
- Recommended case: AEG10C/MAP: $169.99
- Finish: Blacked Out
LIST PRICE: $599.99
ESTIMATED STREET PRICE: $399.99
TCY621
- Talman Double Cutaway body
- Neck joint at 16th fret
- Spruce top
- Sapele back & sides
- Okoume neck
- Purpleheart fretboard & bridge
- Black Die-cast tuners
- Ibanez Undersaddle pickup
- Ibanez AEQ-2T preamp w/Onboard tuner
- Ibanez Advantageā¢ bridge pins
- Recommended case: TM50C/MAP: $179.99
- Finish: Blacked Out
LIST PRICE: $374.99
ESTIMATED STREET PRICE: $249.99
Martin's 2025 NAMM Show lineup features new guitars with enhanced playability and vintage aesthetics.
C. F. Martin & Co. is unveiling an exciting lineup of new guitars ahead of The 2025 NAMM Show, including refinements to its trusted Standard Series and two all-new Retro Plus guitars.
With the Standard Series refresh, Martin brings fans enhanced playability, timeless aesthetics, and three stunning new models, while its two new Retro Plus guitars offer thermally aged spruce tops and the classic appearance of an 18-style guitar at an accessible price point. These releases showcase Martin's mission to create instruments that unleash the artist within.
These new guitars and more will be on display at The 2025 NAMM Show in Anaheim, California, through Saturday, January 25, with more releases to come.
Standard Series Refresh
Martin is refreshing its popular Standard Series lineup to bring subtle yet impactful refinements to enhance the look, tone, and playability of these iconic guitars, while introducing three new models to the series: the D-17, 000-17, and OM-45.
One of the key updates is Sitka spruce Golden Era (GE) top bracing, as featured on the Modern Deluxe Series, which offers a more vintage, breathy tone with enhanced sustain. The GE modified low oval neck profile maintains its popular shape but is optimized for vintage appeal with minimal increase in total mass.
It's paired with playability enhancements like a thinner fingerboard with a gently beveled comfort edge and refined string spacing at the nut, while the new GE modern belly bridge features smoother, more comfortable corners.
Standard Series guitars also now feature either bone or ebony bridge pins, along with newly added sunburst and ambertone finish options for select models. Additional aesthetic updates include a long diamond neck transition, a nut cut on angle, and a sleeker vintage-style heel.
These are the changes Martin enthusiasts have been asking for, delivering a blend of vintage appointments and modern playability enhancements. Players will notice improved comfort and vintage tones, particularly with the GE-inspired bracing and aesthetic refinements.
For more information, please visit martinguitar.com.
D-17
The Martin D-17 is a bold new offering in the refreshed Standard Series, combining vintage-inspired appointments with modern refinements for players seeking rich sounds and enhanced playability. Its iconic Dreadnought body shape is a favorite among players for its loud, projective tone and strong bass. This model is handcrafted with a satin-finished solid mahogany body, delivering a warm and woody tone, while vintage-inspired details such as a sleeker heel and nickel open gear tuners give the guitar a timeless, elegant look. With its satin-finished select hardwood neck and 25.4" scale length, whether youāre strumming big chords or picking intricate tunes, the D-17 delivers powerful, dynamic sound with a classic, vintage vibe.
000-17
The Martin 000-17 is another fresh addition to the Standard Series lineup. Its Auditorium (000) body shape offers a balanced tone and comfortable size, making it great for both fingerstyle playing and heavy-handed strumming. Crafted from solid mahogany with a satin finish, it delivers a warm, woody tone with a clear top end and a punchy midrangeāideal for players seeking a vintage-inspired sound with a modern edge. Its satin-finished select hardwood neck and 24.9" scale length contributes to a more relaxed string feel and warmer, mellower tones. Whether youāre playing at home, in the studio, or on stage, the 000-17 delivers the balanced, dynamic sound that players expect from a high-quality Martin.
OM-45
The Martin OM-45 is a pinnacle of craftsmanship in the refreshed Standard Series, combining classic appointments with modern enhancements for a truly exceptional instrument. This all-new full-gloss acoustic is crafted with solid East Indian rosewood back and sides and a solid spruce top, delivering a rich, resonant tone with remarkable sustain. Its genuine mahogany neck ensures a smooth, effortless feel, while the longer 25.4" scale length provides just the right amount of string tension for enhanced clarity, making this guitar great for intricate picking and strumming. Its dazzling pearl inlay, aging toner, and gold open gear tuners offer an elegant touch, making the OM-45 as stunning to look at as it is to play.
De Retro PlusĀ Mahogany
The Martin DE Retro Plus Mahogany is inspired by Martinās legendary 18-style flagship models. It combines powerful tone and iconic design with cutting-edge craftsmanship at a fraction of the price. Its torrefied solid spruce top is thermally aged for enhanced resonance and a beautifully seasoned sound, delivering the rich, broken-in tone of a vintage instrument from the first strum. Itās the same premium feature long reserved for our Authentic and Modern Deluxe series, now available for the first time ever in the Road Series. It even comes stage-ready with Martin E1 electronics, featuring a built-in tuner and controls for dialing in your perfect live tone.
000E Retro PlusĀ Mahogany
This 000 model blends balanced tone with the same cutting-edge craftsmanship and 18-style appearance as its Dreadnought counterpart, including a torrefied solid spruce top. With solid mahogany back and sides, scalloped spruce X bracing, a Performing Artist neck, ebony fingerboard and bridge, and Martin E1 electronics, these guitars have everything you could want in an acoustic. Ideal as a gigging workhorse or your first step into premium acoustics, they deliver best-in-class quality at an unbeatable value for serious players, and a lifetime of inspiration for anyone who picks one up. Just be warned, you wonāt be able to put them downābecause nothing compares to a Martin.