The Nashville-based power player uses classic-style guitars and amps to create big tones that echo from the past to the future.
Our last Rundown with J.D. Simo was eight years ago. Since then, the songwriter, guitarist, and producer has worked with Jack White, Tommy Emmanuel, Luther Dickinson, Dave Cobb, Blackberry Smoke, and even been a friend in Grateful Dead founder Phil Lesh’s band Phil and Friends. Currently, Simo is promoting his most unique, original, and raw album yet, called Mind Control, where he explores Afrobeat grooves and Mississippi trance blues. Simo invited John Bohlinger and the PG team to his studio to look at some new and old friends with strings, cones, and attitude.
Brought to you by D’Addario XS Strings.
Hail to the Chief
JD Simo’s No. 1 remains his beloved and battered 1962 Gibson ES-335. It’s had a few changes since his last Rundown. Note JFK on the back of its headstock! Nashville star luthier Joe Glaser modded the neck tone control to knock it out of phase. During quarantine, Simo reinstalled the original Bigsby bridge with nylon saddles. This, and all of Simo’s guitars, use Stringjoy strings (.010 sets, when tuned to standard) and are picked with Jim Dunlop tortoise mediums.
Trifecta of Cool
The backside of the 335's headstock reveals some classic stamps.
Picks of the Litter
Here you see JD's Jim Dunlop tortoise medium pick (for guitar) and a Dave Grisman DAWG pick (for mandolin).
Jazzmaster Just in Name
It began life as a mid-’60s Jazzmaster body. Fellow Nashville-based guitarist George Bradfute added a MusiKraft neck and refinished and rewired this 6-string with a humbucker and S-style pickups from Vintage Inspired Pickups, out of Beverly, Massachusetts. There is a phase switch on the tone control.
Headstock Shock
A close look at this axe’s headstock logo reveals that … well, this offset has a unique make and model name. The Asscaster stays tuned down to B with .014–.064 strings.
From the Deeps
This Echopark Exner Tavares in a seemingly luminescent finish is made from white pine sinker wood. It features a gold-foil neck pickup, a ’70s Fender Wide Range bridge pickup, and a Chris Swope Guitars bridge. The Exner stays tuned down a whole step, with .011–.049 strings.
Down in the Hollows
Here’s an all-stock 1952 Gibson ES-5 in standard tuning and strung with flatwound .012—.056 strings, for vintage tone. This model debuted in 1949 as an electric version of Gibson’s then-popular acoustic L-5.
Lab Rat
This Gibson Custom Shop Murphy Lab ’64 SG Standard features OX4 pickups, hand-wound by Mark Stow in Oxford, England. The finish is the work of Gibson’s famed in-house aging and replication expert, Tom Murphy.
Humble Hotshot
Simo’s going for heavy acoustic vibe with this 1965 Silvertone H165. It stays tuned down to C# and is amplified with a LR Baggs M80 pickup.
Mondo Mando
This 1966 Kay Airline mandolin is hipper than most, with the company’s cool Kelvinator-style logo on its headstock. It’s all original, including the Jimmy Reed-style pickup and two-tone binding.
Mr. Natural
J-50 is the Gibson company’s designation for its natural-finish J-45 workhorses—the guitar that helped define modern folk music. This 1961 J-50 features a 1963 DeArmond RHC-B soundhole pickup and stays strung with nickel bronze .012–.056 strings.
Goodbye Marshalls
Depending on the scenario, Simo currently uses one, or a combination of, these amps: a 1964 Ampeg Gemini I with a Weber ceramic-magnet ferromax speaker, a 1949 Alamo Model 3 (lower right), a 1972 Fender silver-panel Deluxe Reverb converted to black-panel specs (also with a Weber speaker), and a Pre CBS Amps Clifford 18W made by Zack Allen of Nashville’s Carter Guitars. The latter is essentially a 7591-output-tube Princeton Reverb clone and has a Weber speaker. Simo runs with his amps with an AmpRX Brown Box power attenuator.
At the Stomp Post
Simo’s very simple pedalboard includes a 1972 Dallas Arbiter Fuzz Face, a 1973 Vox Cry Baby with a Chase tone pot, a rehoused vintage Kay fuzz, a Strymon El Capistan, and a Fender trem/reverb Switch. XAct Tone Solutions made the board and its battery box. Simo also uses Divine Noise Cables.
- Hooked: JD Simo on Isaac Hayes' “Walk on By” - Premier Guitar ›
- SIMO: New Interview and Exclusive Full Album Stream - Premier ... ›
- Guthrie Trapp: Man of a Thousand Gigs - Premier Guitar ›
- Blackberry Smoke Guitarists Charlie Starr and Paul Jackson Rig Rundown Guitar Tours - Premier Guitar ›
- JD Simo Grows Into His Sound - Premier Guitar ›
- Gibson's Murphy Lab Collection Unveils Five Light Aged Acoustics - Premier Guitar ›
- Epic Guitar Jam: Ghost Riders in the Sky with Top Artists - Premier Guitar ›
- JD Simo and Luther Dickinson on Phil Lesh and More - Premier Guitar ›
There are very few guitars that can claim to be as instantly recognizable and iconic as Jimmy Page’s 1969 EDS-1275 Doubleneck. The photos of him playing it on stage with Led Zeppelin are indelible to rock ’n’ roll history. While Gibson has been making doubleneck electric guitars since 1958, Jimmy was the player who defined the EDS-1275 from the day it was delivered to him. Introducing the Jimmy Page EDS-1275 Doubleneck VOS, now part of the Gibson Custom core lineup and built to the exact specifications of Jimmy’s iconic EDS-1275 Doubleneck.
The Jimmy Page EDS-1275 features a double-cutaway one-piece mahogany body that provides exceptional access to the full length of both the12-string and six-string mahogany necks. Both necks have long tenons and are hide glue fit, and the neck profiles are recreated from 3D scans of the necks on the original guitar. The necks are both capped with bound Indian rosewood fretboards. Each fretboard is equipped with 20 authentic medium jumbo frets and adorned with aged cellulose nitrate parallelogram inlays. The fretboards of both necks have a 12” radius, which is perfect for both playing chords as well as for string bending while soloing. The 18 tuners are Kluson double line, double ring style, just like those found on the original guitar, and even the headstocks feature the correct 17-degree angle and specific logo stylization found on Jimmy’s EDS-1275. The electronics are just as authentic and deliver all of the sonic character of Jimmy’s legendary EDS-1275. Two uncovered Jimmy Page EDS-1275 Custombuckers with double black bobbins and Alnico 5 magnets are used for the two six-string pickups, while a covered pair is installed on the 12-string neck. Of course, the two volume and two tone controls use CTS potentiometers and period-correct ceramic disc capacitors, and the pickup select switch, neck select switch, and output jack are all from Switchcraft.
Here is your opportunity to own a clone of Jimmy Page’s famous EDS-1275, identical to how it appeared on the day that Jimmy first received the guitar. A Gibson Custom hardshell case is included, along with a vintage leather strap, and a certificate of authenticity with a photo from famed photographer Barrie Wentzell.
Jimmy Page EDS-1275 Doubleneck VOS '69 Cherry
Recreation of the EDS-1275 used by Jimmy Page made using 3D scans of the original guitar, one piece mahogany body, mahogany six and 12-string necks with custom Jimmy Page profiles, Indian rosewood fretboards, Jimmy Page Custombucker pickups with Alnico 5 magnets and double black bobbins, Gibson Custom hardshell case
Reader: Daniel Switkin
Hometown: Oakland, California
Guitar: Doublecaster
I've been using a multitrack looper with a guitar and an octave pedal, which was okay for simple bass parts, but didn’t give me thick strings and I couldn’t slap with it. So I decided to build a double-neck prototype specifically for looping, with a 6-string guitar and a 4-string bass.
Since building the necks would be the hardest part, I looked around for instruments with bolt-on necks I could reuse. Squier makes an Affinity Stratocaster and a Mini Precision Bass which were affordable and had matching fretboards, so I bought those. It was also cheaper to reuse the electronics and hardware that came with them, rather than buying everything separately.
Using two precut instrument bodies saved the burden of having to route cavities for the electronics.
My plan was to design my own body from scratch. As I debated which neck should go on top, how far apart they should be, and whether to line up the nuts or the saddles, I realized there was actually enough wood there to make a double neck body, which saved me the work of recreating the neck pockets, etc. Putting the guitar on top made barre chords much more comfortable, and the 28.6" bass scale meant I could still reach the first fret easily.
After stripping the paint with a heat gun, I ran both bodies through a table saw, glued them together, and thinned them to 1 3/8". Then I created an offset body shape, a new arm bevel, and reshaped the three cutaways. The pickguards are both original, with the guitar side cut down to make a yin and yang shape. The controls are volume and tone for each neck, using the original knobs. I moved the jack to the back and upgraded it to stereo so the guitar and bass signals can run through separate effects chains.
Note the location of the jack on the back of the extended-shape body. It’s unconventional but practical.
My top concerns were weight and ergonomics. Many doublenecks are around 12 to 13 pounds and 18" wide. I knew I would never play something that big, no matter how good it sounded. To that end, I saved weight everywhere and tracked everything to the gram in a spreadsheet. (That’s also the reason I chose a fixed bridge instead of a vibrato.) I ultimately used a wipe-on gel stain to keep the weight down further. Stripping the paint from the factory saved 5 ounces! The final playable weight is 9 pounds, 5 ounces, and 15 1/4" wide at the lower bout. This has been pretty manageable, however, there is some neck dive because of the tuners. I’m taking everything I’ve learned from this prototype and designing a new doubleneck, which will be headless. I believe I can shed another pound and eliminate the neck dive that way. You can watch my entire build on YouTube.