Like King Ghidorah, these rock fretmasters prove three heads are better than one.
After a five-year break in studio releases, Train came roaring back this year with AM Gold and a tour with dates stretching into 2023 that’s delivering their new songs and a sampling of the group’s 28 charting singles from their nearly 30-year history. PG’s John Bohlinger stopped in on the band’s two guitar players, Jerry Becker and Taylor Locke, and bassist Hector Maldonado, before their June 21 show at Nashville’s Ascend Amphitheater. They displayed the big bevy of instruments they use to recreate the Train sound live.
PS: Special thanks to techs Wayne Davis and Stephen Ferrera-Grand for help running down the rigs.
Brought to you by D’Addario Nexxus 360 Tuner.
Yellow Fever
Taylor Locke’s No. 1 is this all-stock, scarred Gibson Custom Shop Les Paul Special in TV yellow. For the record, Locke uses Shubb and Kyser capos, strings his axes with Dunlops, and uses the latter company’s picks and slides.
Hum-Doozie
When the song calls for a guitar with humbuckers, Locke goes with his all-stock Gibson Custom Shop R7 Les Paul Goldtop. It’s essentially a re-do of a 1957 Paul right down to the chunky C-profile neck and Indian rosewood fretboard.
Double Trouble
Some of Train’s songs require both electric and acoustic tones, and for those Taylor employs an Epiphone Casino, which tech Stephen Ferrera-Grand has outfitted with Fishman’s PowerBridge pickup system. The jack on the Casino is stereo, which enables splitting the stock electric pickups and a piezo pickup to two separate wireless packs, mounted side-by-side on Taylor’s guitar strap. The piezo signal hits a Sound Sculpture Volcano expression pedal volume controller that routes to an on/off switch on his Line 6 HX Effects stomper. The piezo sound is sent to front-of-house and monitors via a Fishman Aura Spectrum DI preamp.
Fab Filtration Across the Nation
When it’s time to go Filter’Tron, Locke straps on this tuxedo’d G6128T Vintage Select ’89 Duo Jet with a trusty Bigsby. In case the colors aren’t shining though in the photo, it’s an impressive black with metallic green sparkle, and Locke keeps it tuned a half-step down and strung with Dunlop .011s
Old Frontier
Locke aims for a couple of classic acoustic guitar tones, and for vintage vibe he reaches for this 1964 Epiphone Frontier. It’s from the original ’58 to ’70 run, with a Sitka spruce top and maple back and sides. These days, the model has been restored to the catalog courtesy of Gibson’s acoustic builders in Bozeman, Montana.
Clydesdale Tone
The workhorse sound of the Gibson J-45 resonates in the Train catalog, and this is one of many the band keeps in their 6-string arsenal.
Reso-Phonics
When the language of roots guitar needs to be spoken, Locke grabs his Gretsch resonator—part of the company’s Roots Collection of guitars. This one uses Gretsch’s patented Ampli-Sonic biscuit cone.
Playing the Dozens
When it’s time to wrangle acoustic jangle, this all-stock 1971 Ovation Glen Campbell 12-string gets to shine and shimmer. Unlike modern 6-string Campbell signature Ovations, this guitar lacks a cutaway. It has a Sitka spruce top, a walnut bridge, and an ebony fretboard—and sounds killer.
It’s Pronounced Oo-koo-lay-lay in Hawaiian
The hit “Hey, Soul Sister,” which reached No. 3 on Billboard’s pop chart in 2009, is guaranteed set-list material for every show. So, of course, Locke always has a requisite ukulele onstage. Here’s a look at the pair of Godin ukes in his rack.
Lean, No Cheese, 35 Watts
Locke uses a Top Hat King Royal 2x12 combo kept slightly off stage but loud enough to be audible. The 35-watter has three 12AX7s and four EL84 power tubes, and a GZ34 governing the rectifier. There’s a fat-off-bright switch, too. How does he run it? See the next photo.
All Set!
Here are his settings for the Top Hat. Note the master volume riding at 1 o’clock and his preference for the hi-input jack.
Is That a Banana, or….
Locke isn’t monkeying around: If his Top Hat goes down, he’s got a Vox C4 tucked aside as a spare. And a banana—maybe to snack on while Ferrera-Grand powers the amp up?
The Great Switcheroo
Locke’s electric guitar signal hits a Shure Axient Digital wireless and zooms into a Radial SW4 switcher. Tech Stephen Ferrera-Grand does the wireless switching on the Radial unit, in his guitar rack.
Above the SW4, you’ll see, peeking out, the acoustic boss: a Countryman DI. The Godin ukuleles follow the same signal flow as the acoustics, but along a different path into a separate Countryman DI.
Treading the Treadles
From the rack, the signal is sent out to a Pedaltrain ’board, outfitted with a Best-Tronics patchbay. The board contains a Dunlop DVP1XL volume pedal to a Line 6 HX. A second DVP1XL controls certain effects parameters, such as delay repeats and Leslie speed. The signal is then sent into a Boss NS-2 noise suppressor and on to the Top Hat amp.
Each speaker gets its own microphone: a Shure SM57 and an Audio-Technica AT4040.
For the majority of the set, Taylor keeps his HX set up with the following effects models: a Tone Bender fuzz (for leads and solos), a Klon Centaur (primary overdrive sound, almost always on), an MXR Timmy OD (neutral volume boost), EHX Deluxe Memory Man (modulated slap delay), Boss DM-2 Delay (long delay), and a Fender Vibratone (rotary). Taylor scrolls to other pedalboard scenes for song-specific effects, using tremolo for “Meet Virginia,” a Small Stone phaser for “AM Gold,” and so on.
Butterscotch Bliss
Another entry from the realm of the classics: Jerry Becker’s 2011 all-stock Fender American Vintage ’52 Telecaster has an ash body, a large U-profile neck, and, of course, a maple fretboard. It is strung with Dunlop DEN1046 Electric Nickel Performance+ string sets, running .010–.046. PS: Becker uses Levy’s straps and wireless pouches, Dunlop custom graphic signature picks, and Kyser Quick-Change capos.
Red Horse
This Gibson SG Classic from 2010 is stock and strung with Dunlop Performance+ .010–.046 sets—as are all his electrics. It has P-90s, a rosewood fretboard, and pearloid dot inlays up the neck.
Guitar of the Beast
This second-generation Gibson Les Paul Special reflects the body style that led Les Paul himself to cut ties with Gibson in the early 1960s. Nonetheless, with their two P-90s and lighter slab bodies, these are killer guitars. The double-horn cutaways make this 1973 a rare beast. It’s stock.
All Stock and Ready To Rock
Here’s Becker’s 1973 Gibson Les Paul Custom, left as it came from the factory. As you may recall, this model comes with “banjo”-style fret wire, to earn their reputation as—as Gibson put it on the model’s introduction in 1954—fretless wonders.
Modern Classic
This Gibson ES-339 was built in the first year the model was issued: 2007. The company introduced this guitar as a smaller—Les Paul sized—take on the ES-335, with a laminated maple-poplar-maple body, a maple center block, and spruce contour braces.
One More 45
Here’s yet another of Train’s Gibson J-45s. This one is a 2013 Custom Shop model in a wine red finish, and it is strung with Elixir 11050 80/20 Bronze Polyweb lights, gauged .012 to .053.
Nashville Tuning
Becker’s 1966 Gibson B-25 is set up in Nashville, or high strung, tuning. In this tuning, the wound E, A, D, and G strings are replaced with lighter-gauge strings tuned an octave higher than usual. In the old days, this had to be done by raiding 12-string sets, but some modern string makers produce Nashville tuning sets. So, Becker uses D’Addario EJ38H Phosphor Bronze .010–.027s.
Canadian Nylon
This 2017 Godin Multiac Nylon Duet Ambiance Natural HG has Fishman electronics that allows the internal blending of four microphone settings. It also sports a slim nut width (1.9"), a Richlite fretboard, and a chambered mahogany body. The strings: D’Addario EJ31 Pro-Arté Rectified Nylon Hard Tensions.
In the Pedal Pond
Becker uses a Fractal Audio Systems FX8 MkII combined with a Mission Engineering SP-1 Expression Pedal. There’s a Lehle D.Loop SGoS Loop Switcher, a Boss TU-3 Tuner, a Radial JR-2 Remote, and a Lehle P-Split Passive Splitter. It’s all powered by a Voodoo Labs Pedal Power 2 Plus.
But Wait, There’s More
Guitar tech Wayne Davis mapped out Becker’s signal flow for us. The electric guitars hit a Shure Axient Digital Wireless receiver and flow into a Radial JX62. There, the 6-strings can be directed into the Lehle D.Loop in and then out via a loop A send to the Fractal FX8. The loop A return then reroutes through a D.Loop out to the Radial again. Then there are amp options: a Matchless DC-30 or a Leslie combo preamp and 145 rotary speaker cabinet. Acoustic guitar arrives via the wireless and hits the PA via the JX62 DI out.
Green Sound Machine
This envy-shaded DC-30 is Becker’s big gun. It was the company’s first design and gets huff from four EL84s, with two preamp sections: one powered by two 12AX7s and the other by a single EF86. That’s a lot of tonal versatility.
The Understudy
This Vox AC30 acts as Becker’s back up.
Coming Up Roses
Bassist Hector Maldonado’s long search for an early ’60s P bass landed him this 1960 Fender Precision days before Train’s current summer tour. The gem was professionally refinished by Joe Riggio of Riggio Custom Guitars at some point, but other than that it’s as Leo intended over 60 years ago. Riggio helped connect Maldonado to the seller so he could acquire his dream bass.
No. 2
With the arrival of his new old P, this off-the-rack Fender American Vintage ’62 P bass reissue got demoted to the No. 2 slot. But Maldonado says it plays better than some of his vintage instruments, and this 4-string has been around the world a few times with Train. Both Fenders take D’Addario roundwounds (.045–.100).
Sir Paul’s Highball
If you’ve spent time with any of the last three Train albums, you’ve heard this limited-run Hofner Gold Label Violin Berlin model. It is made of German Nussbaum wood and has the company’s 511B staple pickups in a normal-spacing configuration. Hofner’s Gold Label instruments are highly limited editions.
Get Back!
For the ultimate Beatles’ vibe, Maldonado uses this Hofner B-Bass HI-Series Violin model. It provides the desired “pluck” sound of 1964. Both of his stage Hofners take D’Addario XL Chromes, flatwound (.045–.100).
Spanish Flair
“Cleopatra” off AM Gold has a flamenco guitar part. Maldonado is classically trained, so he was the obvious choice to handle it, plus Becker and Locke are already busy with their own guitar chores on the song. Hector’s setup on his Yamaha CG172SF is creative. He uses a blend of strings from his Fender Bass VI and nylon guitar strings to hold down the low end and shred fingerstyle.
Racked and Ready
A Mesa/Boogie Subway D-800+ powers his basses, while an Avalon U5 Class A Active Instrument DI give a clear signal to front-of-house. And like his compatriots, he’s running a Shure AD4D rackmount wireless system.
More on the Floor
Maldonado has more pedals on the floor than his fellow Trainmen. His stomp station consists of a trio of mini MXRs—a Carbon Copy, Phase 95, and Vintage Bass Octave—plus an Electro-Harmonix Holy Grail Nano reverb, a Tech 21 SansAmp Bass Driver DI, a DigiTech Bass Driver OD, an Origin Effects Cali76 compressor, and a Mesa/Boogie Five-Band Graphic EQ. A Dunlop Volume (X) DVP3 and a Boss TU-3s mini Chromatic Tuner keeps his instruments reined.
This wonky Zim-Gar was one of many guitars sold by importer Gar-Zim Musical Instruments, operated by Larry Zimmerman and his wife.
The 1960s were strange days indeed for import guitars, like this cleaver-friendly Zim-Gar electric.
Recently I started sharing my work office with a true gem of a guy … one of the nicest fellas I’ve ever come across. If you’ve been following my column here, you might remember my other work mate Dylan, who is always telling me about new, fad-type things (like hot Honey guitars) and trying to convince me to use AI more. (What can I say, he’s a millennial.) But Steve, on the other hand, is about 10 years my senior and is a native New Yorker—Brooklyn actually, from the Canarsie neighborhood. Steve is a retired teacher and spent many years teaching in the Brownsville area of Brooklyn, and man, he has some amazing stories.
Mostly we talk about music and sports (he’s exiled here among us Philadelphia sports fans) and he’s just endlessly interesting to me. He has a huge appetite and can eat a whole pizza. When he talks, he sounds like one of the Ramones and he still has an apartment in Rockaway Beach. We both love Seinfeld and, like George Costanza, Steve knows where all the great bathrooms are across New York City. Since he’s been added to my circle (and is such a mensch), I decided I should work him into a column.
So here’s the connection: Back in the day there were many American importers, dealers, and wholesalers. A lot of them were based in New York, Chicago, and Los Angeles, but I only know of one guitar importer located in Brooklyn: Gar-Zim Musical Instruments. The company was run by Larry Zimmerman and his wife, and the couple had some success importing and selling Japanese guitars and drums. I used to see early Teisco imports with the Zim-Gar badge, which was the brand name of Gar-Zim. I’ve also seen Kawai guitars with the Zim-Gar label, but the Zimmerman’s seemed to sell cheaper and cheaper gear as the ’60s wore on, including the piece you see here.
“This build reminds me of the cutting boards I used to make in wood shop back in my high school days.”
The model name and factory origin of this guitar is a mystery to me, but this build reminds me of the cutting boards I used to make in wood shop back in my high school days. The guitar is just flat across the top and back, with absolutely no contouring or shaping. Its offset body is plywood with a thin veneer on the top and back. From a distance this guitar actually looks kind of nice, but up close you can see a rather crude and clunky instrument that offers little flexibility and playability. The non-adjustable bridge is off center, as is the tremolo. It was really hard to get this guitar playing well, but in the end it was worth it, because the pickups were the saving grace. Another example of gold-foils, these units sound strong and raw. The electronics consist of an on/off switch for each pickup and a volume and tone knob. The tuners are okay, and the headstock design is reminiscent of the Kay “dragon snout” shape of the mid to late ’60s, which is where I would place the birthdate of this one, probably circa 1966. Everything is just so goofy about this build—even the upper strap button is located on the back of the neck. It reminds me of that era when simple wood factories that were making furniture were tasked with building electric guitars, and they simply didn’t know what they were doing. So, you get oddities like this one.
Gar-Zim continued to sell guitars and other musical instruments through the 1970s and possibly into the ’80s. I once even saw a guitar with the label Lim-Gar, which is totally puzzling. I think there should’ve been a Stee-Gar designation for my new buddy Steve-o! Yes, good readers, with guitars and me, there are always just a few degrees of separation.
See and hear Taylor’s Legacy Collection guitars played by his successor, Andy Powers.
Last year, Taylor Guitars capped its 50th Anniversary by introducing a new guitar collection celebrating the contributions of co-founders Bob Taylor and Kurt Listug to the guitar world. The Legacy Collection revives five of Bob Taylor’s classic acoustic models, curated by the legendary luthier and innovator himself. “To imagine that we’re doing guitars that harken to our past, our present and our future all at the same time,” Bob says, “I really like that.”
In developing the collection, Bob preserved the essence of his originals while integrating performance and playability upgrades introduced during his tenure as designer-in-chief. “It’s an up-to-date version of what those guitars would be,” Bob explains, “but with the same sound.”
Visually, these guitars feel classic—clean, understated and unmistakably Taylor. While Bob’s original aesthetic preferences are showcased in his Legacy models, the nod to the past runs deeper than trade dress.
From his earliest builds, Bob favored slim-profile necks because he found them easier to play. That preference set a design precedent that established Taylor’s reputation for smooth-playing, comfortable necks. Legacy models feature slim mahogany necks built with Taylor's patented New Technology (NT) design. “My first neck was a bolted-on neck but not an NT neck,” Bob says. “These are NT necks because it’s a better neck.” Introduced in 1999, the NT neck allowed for unprecedented micro-adjustability while offering a consistent, hand-friendly Taylor playing experience.
What makes this collection unique within the Taylor line is Bob’s use of his X-bracing architecture, favoring his time-tested internal voicing framework over more recent Taylor bracing innovations to evoke a distinctive tone profile. Since Andy Powers—Taylor’s current Chief Guitar Designer, President and CEO—debuted his patented V-Class bracing in 2018, V-Class has become a staple in Taylor’s premium-performance guitars. Still, Bob’s X-bracing pattern produces a richly textured sound with pleasing volume, balance and clarity that long defined the Taylor voice. All Legacy models feature LR Baggs VTC Element electronics, which Bob says “harkens back to those days.”
The team at Taylor thought the best way to demonstrate the sound of the Legacy guitars was to ask Andy Powers, Bob’s successor, to play them. A world-class luthier and musician, Andy has spent the past 14 years leading Taylor’s guitar innovation. In addition to V-Class bracing, his contributions include the Grand Pacific body style, the ultra-refined Builder’s Edition Collection, and most recently, the stunning Gold Label Collection.
Below you’ll find a series of videos that feature Powers playing each Legacy model along with information about the guitars.
Legacy 800 Series Models
First launched in 1975, the 800 Series was Taylor’s first official guitar series. Today, it remains home to some of the brand’s most acclaimed instruments, including the flagship 814ce, Builder’s Edition 814ce and new Gold Label 814e.
The Legacy 800 Series features the 810e Dreadnought and two Jumbos: the 6-string 815e and 12-string 855e. Each model serves up a refined version of the Dreadnought and Jumbo body shapes Bob inherited from Sam Radding—the original owner of the American Dream music shop where Bob and Kurt first met. “I was making my guitars in the molds that Sam had made at American Dream,” Bob recalls. “There was a Jumbo and a Dreadnought. That’s all we had.”
All three Legacy 800 Series guitars feature one of Bob’s favorite tonewood combos. Solid Indian rosewood back and sides are paired with a Sitka spruce top, yielding warm lows, clear trebles and a scooped midrange.
Aesthetic appointments include a three-ring abalone rosette, mother-of-pearl Large Diamond inlays, white binding around the body and fretboard, and Bob’s “straight-ear” peghead design. Both Jumbo models also showcase a mustache-style ebony bridge—a nod to Bob’s early Jumbo builds.
Legacy 810e
The 810 Dreadnought holds a special place in Bob Taylor’s heart. “My first 810, the one I made for myself, was a thrilling guitar for me to make,” he says. “It’s the one and only guitar I played. It didn’t matter how many guitars we made at Taylor, that’s the one I took out and played.” The Legacy 810e brings back that bold, room-filling Dreadnought voice along with the easy playability expected from a Taylor.
Taylor Guitars | Legacy 810e | Playthrough Demo
Legacy 855e
Taylor’s first 12-strings found an audience in 1970s Los Angeles. “I was making guitars that would find their way to McCabe’s in Santa Monica and Westwood Music,” Bob says, “and these guitars were easy to play. Twelve-strings were a popular sound in that music. It was a modern country/folk/rock music genre that was accepting our guitars because they were easy to play. They also liked the sound of them because our guitars were easier to record.” The Legacy 855e, with its resonant Jumbo body, slim neck and gorgeous octave sparkle, carries that tradition forward.
Taylor Guitars | Legacy 855e | Playthrough Demo
Legacy 815e
The Legacy 815e revives Taylor’s original Jumbo 6-string, delivering a big, lush sound with beautifully blooming overtones.
Legacy Grand Auditoriums
In the early 1990s, Bob Taylor heard a consistent refrain from dealers: “Not everybody wants a dreadnought guitar anymore.” Players were asking for something with comparable volume but different proportions—something more comfortable, yet still powerful. This feedback inspired Bob to design a new body style with more elegant curves, more accommodating proportions and a balanced tonal response. The result was the Grand Auditorium, which Taylor introduced in 1994 to celebrate its 20th anniversary.
Thanks to its musical versatility and easy playability, Bob’s Grand Auditorium attracted a wide variety of players. “We came into our own with our Grand Auditorium,” he says. “People were describing it as ‘all around.’ It’s a good strummer and good for fingerstyle, but it’s not totally geared toward strumming or totally geared toward fingerstyle.” Also referred to as the “Swiss-Army Knife” of guitars or the “Goldilocks” guitar, the GA quickly became a favorite among guitarists across playing styles, musical genres and different playing applications including recording and live performance. “That guitar made studio work successful,” Bob says. It gained a wider fanbase with the debut of the “ce” version, which introduced a Venetian cutaway and onboard electronics. “That became one of our hallmarks,” says Bob. “If you want to plug in your guitar, buy a Taylor.”
Today, the Grand Auditorium is Taylor’s best-selling body shape.
The Legacy Collection features two cedar-top Grand Auditoriums inspired by past favorites: the mahogany/cedar 514ce and rosewood/cedar 714ce. Both models incorporate Bob’s original X-bracing pattern for a tonal character reminiscent of their 1990s and 2000s counterparts. Shared aesthetic details include a green abalone three-ring rosette, ebony bridge pins with green abalone dots, a faux-tortoiseshell pickguard and Taylor gold tuning machines.
Taylor Guitars | Legacy 815e | Playthrough Demo
Legacy 514ce
The Legacy 514ce features solid mahogany back and sides paired with a Western Red cedar top, yielding a punchy midrange and dry, woody sonic personality that pairs beautifully with cedar’s soft-touch sensitivity and warmth. It’s a standout choice for fingerstyle players and light strummers who crave nuance and depth. Distinct visual details include faux-tortoise body and fretboard binding, black-and-white top trim, and mother-of-pearl small diamond fretboard inlays.
Taylor Guitars | Legacy 514ce | Playthrough Demo
Legacy 714ce
The Legacy 714ce also features a cedar top, this time matched with solid Indian rosewood back and sides. The result is a richly textured sound with deep lows, clear trebles and a warm, mellow response. Inspiring as it is, this specific wood pairing isn’t currently offered in any other standard Taylor model. Additional aesthetic details include green abalone dot fretboard inlays, black body and fretboard binding, and black-and-white “pinstripe” body purfling.
While the Legacy Collection spotlights Taylor’s past, newer models from the Gold Label, Builder’s Edition and Somos Collections show the company’s legacy is always evolving. Explore the Legacy Collection at taylorguitars.com or visit your local authorized Taylor dealer.
Taylor Guitars | Legacy 714ce | Playthrough Demo
The Oceans Abyss expands on Electro-Harmonix’s highly acclaimed reverb technology to deliver a truly immersive effects workstation. The pedal is centered around dual reverb engines that are independently programmable with full-stereo algorithms including Hall, Spring, Shimmer and more. Place these reverbs into a customizable signal path with additional FX blocks like Delay, Chorus, Tremolo, or Bit Crusher for a completely unique soundscape building experience.
Electro-Harmonix has paved the way for powerful, accessible reverbs since the release of the original Holy Grail and now we’ve pushed the envelope deeper with the fully-equipped Oceans Abyss. Featuring a customizable signal path with up to 8 effects blocks, the Oceans Abyss can be configured as individual reverb, modulation, EQ, delay, bit crusher, saturation or volume effects, or as countless combinations for incredibly creative effect shaping. From a simple Spring reverb to a lush stereo field featuring stereo hall and shimmer reverbs, chorus, delay, overdrive, and tremolo, you can go from surf to shoegaze instantly, without breaking a sweat.
Deep parameter editing is accessible via the high-visibility OLED display with multiple graphical views and easy-to-read designs. Expression/CV control over nearly every parameter gives artful control of your effects and dynamics. Fully-stereo I/O plus an FX Loop allows for use with any instrument, recording set up, or live rig. 128 programmable presets via onboard footswitching or MIDI ensure perfect recall in all performance situations. MIDI IN/OUT ports with MIDI IN support of PC, CC, and Tempo Clock expand the already immense talents of the Oceans Abyss. Connect with UBS-C to Windows or Mac for effects editing, preset management, and more with the free EHXport™ app (coming soon).
- Two Stereo Reverbs available at once, each fully pannable in the stereo field
- 10 reverb types to choose from: Room, Hall, Spring, Plate, Reverse, Dynamic, Auto-Infinite, Shimmer, Polyphonic, Resonant
- Additional FX blocks: Delay (Digital, Analog and Tape emulations), Tremolo, Chorus, Flanger, Phaser, Graphic EQ, Saturation, Bit Crusher, External FX Loop, Volume
- Create custom signal path routing with up to 8 effects blocks. Two blocks may be re-verb, the rest may be any of the additional FX blocks.
- Infinite reverb sustain with the press of a footswitch
- Stereo Audio I/O
- Stereo FX Loop routing on TRS Jacks
- Dual action footswitches allow for momentary or latching use
- Easily enable or disable tails
- 128 fully customizable presets
- All controls can be saved to presets
- Dive deep into global and preset settings to set up Oceans Abyss for your specific needs
- Illuminated slide pots and buttons
- High-visibility OLED graphical display
- Multiple graphical views: Signal Path, Performance, Settings, Physical, Explorer
- Easy-to-navigate menu system
- Ergonomic NavCoder knob allows rotary and directional navigation through menus
- EXPRESSION / CV input to control nearly any parameter in any FX block
- Footswitch input allows for adding up to three external footswitches, each assigna-ble to a number of functions
- MIDI In and Out. MIDI IN supports PC, CC (over nearly every available parameter), and Tempo Clock
- USB-C port to connect to Windows or Mac and interface with EHXport™ app (coming soon)
- 96kHz / 24-bit sample rate conversion
- Supplied with 9.6VDC / 500mA power supply
Our columnist’s silver-panel Fender Bandmaster.
How this longstanding, classic tube amp design evolved from its introduction in 1953.
I have a silver-panel Bandmaster Reverb that I don’t think I’ve talked about enough in this column. It’s one of the most versatile and flexible amps I own, so I use it for everything. It’s portable, has tube-driven reverb and tremolo, and has a full set of EQ knobs including the critical bright switch, which we discussed the importance of earlier this year (“How to ‘Trebleshoot’ a Vintage Fender Amp,” March 2025). The amp is not only pedal-friendly; the flexible 4-ohm output impedance will handle almost all speaker configurations and sound any way you’d like. Let’s take a deeper look at the Fender Bandmaster amp and walk through its development through the years.
The first Bandmaster was introduced in 1953 as a wide-panel tweed amp with Fender’s 5C7 circuit. This rare combo was loaded with a single 15" Jensen P15N and powered by dual 6L6GC tubes in push-pull configuration to produce a modest 25 watts. The 6L6GCs were cathode biased and along with the 5U4GB rectifier tube contributed to a forgiving sag, early breakup, and a midrange-y voice.
Fender made several changes when they launched that amp’s successor in 1955, the more widely known 5E7 narrow-panel Bandmaster, a well-proven amp that has come back as a reissue model. It was still a dual-channel amp—instrument and microphone—but the newer 5E7 model had a fixed bias and a negative feedback loop, providing a louder, firmer, and cleaner tone. Most importantly, the single 15" speaker was replaced by three 10" speakers, making it very similar to the narrow-panel tweed Bassman, the granddaddy of all Marshall amps. This Bandmaster had three speakers instead of the Bassman’s four, and it delivered 25–30 watts instead of 40. It offered early breakup with a midrange-y, big and full tone.
For those not acquainted with tweed amps, the volume and EQ knobs behave differently than on silver- and black-panel Fender amps. The volume pot can act like a distortion control, while the EQ knobs control the volume, and many players I’ve talked to have not really unlocked this secret. This works because, in these circuits, the volume pot sits right before the preamp tube, which allows it to push the tube into full distortion. Since the EQ pots are located right after and are capable of reducing the volume, you’re able to distort the preamp at low volume settings.
“Things became more standardized in 1964 with the arrival of the black-panel AB763 Bandmaster, an amp I have worked on a lot and appreciate for its robustness, simplicity, and versatility.”
In 1960, a short-lived and rare Bandmaster dressed in brown tolex and a black faceplate appeared with the 5G7 circuit. From here on, all Bandmasters had the modern top-mounted chassis. With this circuit, the Bandmaster started to both look and sound more like a black-panel amp. It kept the 3x10" speakers but got a diode rectifier and bigger transformers resulting in a 45-watt output. Tremolo was introduced for the first time, and both channels were now intended for guitar.
The following year, a blonde 6G7 Bandmaster followed as a smaller amp head paired with a 1x12 extension cabinet. It had the timeless early blonde looks with cream tolex, brown faceplate, oxblood grill cloth, large Fender logo, and white knobs. But halfway into the blonde era, towards 1964, things turned strange and rather confusing. There were suddenly two 12" speakers, black knobs, a wheat-colored grill cloth, a more slim black-panel-style Fender logo, a black faceplate, and all in various combinations close to the transition into ’64.
Things became more standardized in 1964 with the arrival of the black-panel AB763 Bandmaster, an amp I have worked on a lot and appreciate for its robustness, simplicity, and versatility. It offers a pure, clean, scooped black-panel tone that’s somewhere between a Vibrolux Reverb and Pro Reverb, which share the medium-sized 125A6A output transformer and dual 6L6GC tubes. With its medium/high power and flexible 4-ohm output impedance, it can drive all kinds of speaker cabinets—as long as you stay between 2 and 8 ohms, you are safe.
For a short time in 1967–68, there was a transitional Bandmaster with aluminum trim and black-panel innards before the all-new silver-panel Bandmaster Reverb replaced it in 1968. The small-head cabinet had grown in size and, unfortunately, weight to accommodate the reverb tank. The amp got a 5U4GB rectifier tube along with a few general silver-panel changes to the circuit. Several silver-panel models existed with minor differences until a 70-watt beast version came along in 1977 with master volume.
To my own 1968 Bandmaster Reverb, I have done a few adjustments. First, I made a custom baffle to hold two 8" speakers. I installed a pair of WGS G8C speakers that fit perfectly on the baffle board without colliding with the reverb tank or transformers. Sometimes, I use only one of the 8" speakers for bedroom volume levels. Second, I reversed the bias circuitry to standard AB763 specs, making it easier to adjust bias correctly on both power tubes. If you are into sparkling clean and funky Strat sounds, you would love this little 2x8" combo.