Bandleader Adam Granduciel on how single-coils, the Dead’s Wall of Sound, and cascades of chorus build his live tones. Plus, bassist David Hartley gets weird, wild, and wonky.
For nearly two decades and across five albums, The War on Drugs’ founder and frontman Adam Granduciel has narrated our complex modern lives while his band has scored our dreams.
The captivating moods of their music, much like us, morph from dense melancholy to saturated, swirling madness and everywhere in between. Granduciel often layers his Springsteen-meets-Young proletariat prose atop a post-rock soundscape, but the heartbeat of their impressive, expansive live shows is their gear and how it is implemented.
“I could play the whole tour with two or maybe three guitars—a White Falcon, Strat, and maybe a Jazzmaster—but I bring all these out just for fun,” he says with a laugh as he considers his trove of axes.
So, let’s have some fun already! Before a full evening of The War on Drugs’ jams in support of 2021’s I Don’t Live Here Anymore, PG was invited to Nashville’s historic Ryman Auditorium. We covered Granduciel’s growing guitar collection, got the skinny on how Jerry Garcia’s monstrous setup played into the bandleader’s theatre rig, and we took in a cockpit view of his stompbox squadron full of tone ticklers, sizzlers, and wigglers. In addition, bassist David Hartley showed off a trio of Ps, an armada of Ampegs, and demo’d a fuzz that has ended his quest for razing tones.
Brought to you by D’Addario XPND Pedalboard.
Keeping It in the Family
If you’re a fan of Rig Rundowns or Kurt Vile & the Violators, you’ve already seen this Strat. The above Fender American Vintage ’57 reissue was once owned by Jesse Trbovich, who’s flanked Vile for years. Trbovich landed a true-blue ’70s Olympic white Strat and needed to unload this to make room. Granduciel quickly raised his hand as a landing spot because he really enjoyed how comfortably the neck played. And since bonding with it, he likes its low-output single-coils because he can “juice it with pedals.” (It’s worth noting that Trbovich put in a Seymour Duncan Antiquity II Strat Surfer Series in the middle position, allowing him to have hum-canceling operation in the second and fourth position.) All of Granduciel’s electrics take Ernie Ball 2220 Power Slinkys (.011–.048).
It’s the One
“When this thing is in my hands, I can react with it, and it becomes this whole other animal. It can be unwieldy, but this guitar plugged into a cranked Princeton or small tweed sounds incredible,” allows Granduciel. So, as you can imagine, this 1969 Gibson SG is Adam’s right-hand when it comes to recording, but, as he explains later in the video, it doesn’t coexist pleasantly with his live setup. He scooped this gem at Rivington Guitars in New York City.
Story Time
This SG’s headstock has a library of tales it is sitting on.
Flip a Coin
Granduciel had lusted after this vintage offset for weeks when seeing it listed on Reverb by Chelsea Guitars. The listing was removed and he thought that it was gone forever. A few months later, he was in NYC and decided to stop into the shop and, low and behold, the sunburst Jazzmaster was on their bench in pieces. Apparently, the original buyer from the Reverb listing was after a birth-year model (1964, as listed on the Reverb page), but when he removed the neck its pocket revealed a 1963 date. He traded in the guitar for a proper ’64 and, fatefully, Granduciel didn’t let a second pass before offering to buy it. Alongside the SG, this is another heavy hitter for recording.
Down Under with Terry
During a 2018 tour of Australia, Granduciel scored this 1966 Fender Jazzmaster that looks swanky with a matching black headstock. He claims the rhythm circuit in this one “sounds killer,” while the lead circuit is “super bright and used on ‘Occasional Rain.’” In addition to being a remarkable instrument, he loves that it reminds him of a short span of time that included a wonderful tour of Down Under, earning a Grammy for Best Rock Album, and the Philadelphia Eagles winning the Super Bowl.
Checked Past
Cracks aren’t meant to be beautiful, especially on guitars, but looking at the ’66’s backside reveals a twisted thumbprint.
Fly, Firebird Fly
This 1965 non-reverse Firebird was upgraded by its previous owner with a set of Lollar P-90s. If you recall the last Rundown with TWOD, Granduciel added a Bigsby, but that has since been removed.
Ol’ Reliable
This Fender American Vintage ’65 Jazzmaster has been a dependable dynamo for Adam. He prefers it because he knows what he’s going to get sonically and he can throw it around without worry. The newer pickups offer a snarlier tone, so it gets used for songs like “Pain,” and the top-end sear helps him cut through the seven-piece live band.
Hummingbird Season
This new-ish Gibson Hummingbird gets busted out for C# tunes and features a LR Baggs M1 soundhole pickup.
Bastion of Tone
Not quite the famed Wall of Sound procured by the Dead and audio engineer Owsley “Bear” Stanley, but Granduciel’s evolving setup is heading in that direction.
Alembic Ace
Since our last Rundown, Adam has ditched the Hiwatts (although he admits to enjoying that era of TWOD) for the Alembic F-2B Stereo Preamp that was used by Jerry Garcia and David Gilmour. He describes its circuity as mimicking the front end of a Fender Dual Showman. “There’s just so much clean headroom and they’re so creamy. And I don’t know what it is, but single-coils and P-90s just come to life here in a way that other amps don’t, so maybe that’s why Jerry and David used them so much.” The Mesa/Boogie Stereo Simul-Class 295 powers the Alembic. He does run a direct line signal from the F-2B to FOH for a clean DI option.
Take a Guess
In the video, Granduciel challenged me to guess how many speakers are in the oversized cab, and I said four. Seemed logical but, as he quickly pointed out, the Marshall 2041 Lead Organ has only a pair of Celestion (pre-rola) 12" speakers. The Alembic runs through this pillar of power.
Fender Firepower
The other side of Adam’s grand equation is a 1960s Fender Bandmaster head that hits a Marshall 1960BV 4x12.
The Swart Solution
As we alluded earlier, his beloved 1969 SG doesn’t jive with his Alembic-Fender setup, so he incorporates its humbuckers into his live rig by plugging into the 5W Swart STR-Tremolo. The SG and Swart typically dance for “Thinking of a Place,” but Granduciel admits to kicking it on with the Fenders during the heat of battle and treating it like a tremolo pedal for parts of “Pressure” and other jams. To the right of the Swart you’ll notice a pair of Rockman Tom Scholz (yeah, the Boston legend) Power Soak attenuators throttling the Alembic and Fender.
Keeping Time in the Loop
The band uses this AKAI Professional MPC Live II for additional drum machines for the show.
User Input
They are harnessed by four Boss FV-500L Foot Volume Pedals controlled by Adam that allow him to bring the samples into the room mix. Additionally, the band syncs their modulation to it, so everyone is locked in. (The MPC clocks or syncs the pulsing of the tremolo for the band. Adam uses a Lightfoot Labs Goatkeeper 2, while bassist David Hartley uses a Malekko Goatkeeper.)
Horseshoe of Madness
Here’s a crow’s-nest view of Adam Granduciel’s massive pedal playground.
Bradshaw’s Boardroom
Most of what Adam does with his feet is simplified by this Custom Audio Electronics R-ST 24 + 2x PSS MIDI controller.
The Fun Begins
Here’s one of the sections of Granduciel’s expanding pedalboard that includes a Wren and Cuff Tri Pie 70, a MXR/Custom Audio Electronics Boost/Line Driver, an Ernie Ball Expression Tremolo, anElectro-Harmonix 1440 Stereo Looper, a Lightfoot Labs Goatkeeper 2, a Strymon TimeLine, a Boss DC-3 Digital Dimension, and a Morley ABC Pro (for switching amps). A Boss TU-3s Chromatic Tuner keeps his guitars in check.
To the Moon, Adam, to the Moon!
Here’s the meat and potatoes of Granduciel’s spreading stomp setup: (top left) a Boss FT-2 Dynamic Filter, another MXR/Custom Audio Electronics Boost/Line Driver, DigiTech Hardwire RV-7 Stereo Reverb, ADA Flanger, JHS Bun Runner, J. Rockett Audio Designs Archer, MXR Flanger, Moutainking Electronics Loud Box, Crowther Audio Prunes & Custard, a Fulltone OCD, and a trifecta of Eventides that rest on the right side—a Space, TimeFactor, and H9. Everything gets current by either a MXR Custom Audio Electronics MC403 Power System or the Eventide PowerMax.
Clovis the Rough Rider
At first glance, you’d probably mistake this for a ’60s or ’70s Fender P, but as bassist David Hartley attests, this is a 2002 Fender Precision named Clovis that he acquired brand new almost two decades ago. Part of Clovis’ charm for Hartley is that it’s the lightest P he’s ever held, making their “Evening With” shows a little easier on the back. It’s stock aside from him swapping out the standard anodized gold pickguard for the tortoiseshell. He uses La Bella 760FS Deep Talkin’ Bass Flats (.045–.105).
Jam Like Jamerson
Another 4-string that does a lot of heavy lifting for Hartley is this 1983 Fender Fullerton ’62 Reissue Precision Bass. While this one isn’t as light as the previous P, he does love how much it sustains.
Find the Note
And occasionally you’ll see Hartley put down all the guardrails and dance with this Fender Tony Franklin Fretless Precision Bass. The connection with this one came through when he heard how much vocal tonality it has. It’s a highly expressive instrument.
Ampeg Assault
The Ps come to life thanks to this boulder of bass tone: a pair of Ampeg Heritage 50th Anniversary SVT amps that hit an Ampeg Heritage SVT-810AV. The SVT on the left is a backup and Hartley plugs into the normal channels.
Simple but Not
Prior to this run, Hartley toyed with the idea of just plugging his Ps into a DI and his Ampeg. Clearly, that plan changed and he’s probably having more fun because of it. His stomp station contains a pair of Boss GE-7 Equalizers (one to help Clovis pop a bit more and the other helps brighten up the ambient drone of the Gamechanger), an Eventide H9, a Gamechanger Audio Plus Sustain Pedal, a Mountainking Electronics Megalith, a Malekko Goatkeeper, a Keeley Super Mod Workstation, and a MXR Phase 90. A Boss TU-3 Chromatic Tuner keeps his Ps sounding right.
- The War on Drugs: Driving Music for the American Dreamscape ... ›
- Rig Rundown Best Ofs: Vintage Amps - Premier Guitar ›
- Tuning Up: Doing It Wrong Feels So Right - Premier Guitar ›
- Dynamo Amplification Releases First Line of Bass Amplifiers - Premier Guitar ›
This wonky Zim-Gar was one of many guitars sold by importer Gar-Zim Musical Instruments, operated by Larry Zimmerman and his wife.
The 1960s were strange days indeed for import guitars, like this cleaver-friendly Zim-Gar electric.
Recently I started sharing my work office with a true gem of a guy … one of the nicest fellas I’ve ever come across. If you’ve been following my column here, you might remember my other work mate Dylan, who is always telling me about new, fad-type things (like hot Honey guitars) and trying to convince me to use AI more. (What can I say, he’s a millennial.) But Steve, on the other hand, is about 10 years my senior and is a native New Yorker—Brooklyn actually, from the Canarsie neighborhood. Steve is a retired teacher and spent many years teaching in the Brownsville area of Brooklyn, and man, he has some amazing stories.
Mostly we talk about music and sports (he’s exiled here among us Philadelphia sports fans) and he’s just endlessly interesting to me. He has a huge appetite and can eat a whole pizza. When he talks, he sounds like one of the Ramones and he still has an apartment in Rockaway Beach. We both love Seinfeld and, like George Costanza, Steve knows where all the great bathrooms are across New York City. Since he’s been added to my circle (and is such a mensch), I decided I should work him into a column.
So here’s the connection: Back in the day there were many American importers, dealers, and wholesalers. A lot of them were based in New York, Chicago, and Los Angeles, but I only know of one guitar importer located in Brooklyn: Gar-Zim Musical Instruments. The company was run by Larry Zimmerman and his wife, and the couple had some success importing and selling Japanese guitars and drums. I used to see early Teisco imports with the Zim-Gar badge, which was the brand name of Gar-Zim. I’ve also seen Kawai guitars with the Zim-Gar label, but the Zimmerman’s seemed to sell cheaper and cheaper gear as the ’60s wore on, including the piece you see here.
“This build reminds me of the cutting boards I used to make in wood shop back in my high school days.”
The model name and factory origin of this guitar is a mystery to me, but this build reminds me of the cutting boards I used to make in wood shop back in my high school days. The guitar is just flat across the top and back, with absolutely no contouring or shaping. Its offset body is plywood with a thin veneer on the top and back. From a distance this guitar actually looks kind of nice, but up close you can see a rather crude and clunky instrument that offers little flexibility and playability. The non-adjustable bridge is off center, as is the tremolo. It was really hard to get this guitar playing well, but in the end it was worth it, because the pickups were the saving grace. Another example of gold-foils, these units sound strong and raw. The electronics consist of an on/off switch for each pickup and a volume and tone knob. The tuners are okay, and the headstock design is reminiscent of the Kay “dragon snout” shape of the mid to late ’60s, which is where I would place the birthdate of this one, probably circa 1966. Everything is just so goofy about this build—even the upper strap button is located on the back of the neck. It reminds me of that era when simple wood factories that were making furniture were tasked with building electric guitars, and they simply didn’t know what they were doing. So, you get oddities like this one.
Gar-Zim continued to sell guitars and other musical instruments through the 1970s and possibly into the ’80s. I once even saw a guitar with the label Lim-Gar, which is totally puzzling. I think there should’ve been a Stee-Gar designation for my new buddy Steve-o! Yes, good readers, with guitars and me, there are always just a few degrees of separation.
In line with the MOOER’s recent expansion on the MSC range, the company is excited to announce the new MSC50 Pro, an Alder-bodied electric guitar with gloss finish, available in the new Magic Crystal color.
Featuring a roasted maple neck with a satin finish, a rosewood fingerboard for playing comfort, 22 frets, and a standard C shape, the guitar has been designed with classic guitarists in mind. This is beautifully emphasized with its beautifully resonant tonewoods, all while still being balanced perfectly with style and comfort of use.
The MSC50 Pro features all of the industry-standard features you might expect from such an impressively affordable guitar, such as bolt-on construction, a bone nut, and a dual-action steel truss rod. However, other features make the electric guitar stand out among others at a similar price point, such as its MTN-3LC locking tuning pegs, beautiful Abalone dot inlay, and, of course, its previously mentioned tonewood selection.
In order to capture the MSC50 Pro's balanced tonal profile, MOOER's luthiers have built it with three perfectly balanced pickups: the MSC-II N single coil neck pickup, the similar MSC-II M single coil middle pickup, and, best of all, the MHB-II B bridge humbucker. When these carefully chosen pickups are combined with the guitar's MPW 2-point chrome bridge, guitarists can make the most out of its tonal versatility, all while maximizing tuning stability.
To ensure that the guitar is suitable for a wide range of genres, both softer and higher-gain examples, the MSC50 Pro has a convenient coil split switch built into it, giving users better resonance control. Of course, this is also combined with a classic tone dial, a standard 5-way tone switch, and a volume control dial.
Overall, the MSC50 Pro reminds users of MOOER guitars that the company has never forgotten about its roots in classic-style guitars. Yes, the company is continuing to develop innovative guitar technology in other areas, but this electric guitar also represents a grounded approach, keeping things classic, sleek, and tonally versatile–all at a reasonable price point.
Features:
- Alder Body with a Gloss Finish
- Available in the Magic Crystal color
- Standard C-shaped roasted maple neck with a Satin finish
- Bolt-on construction
- 22-fret rosewood fingerboard
- Abalon dot inlay
- MTN-3LC locking tuners
- Bone nut
- Dual-Action Steel Truss Rod
- 12" radius
- 09-46 strings
- 25.2" scale
- MSC-II N Single Coil neck pickup, an MSC-II M Single Poil middle pickup, and an MHB-II B Humbucker Bridge Pickup
- Chrome guitar strap pin
- Coil Split Switch
- 5-Way Tone Switch
- Volume and tone dials
- MPW 2-Point chrome bridge
The MSC50 Pro will be available from the official distributors and retailers worldwide on 13th May 2025 at an expected retail price of USD419/Euro399/GBP339.
MOOER Expands Its Popular MSC Guitar Line with the MSC30 Pro and MSC31 Pro
MOOER has never shied away from innovation when it comes to its guitars. However, with the recently announced release of the MSC30 Pro and MSC31, the company reminds us that, sometimes, true innovation lies in mastering and enhancing a proven classic. With this philosophy, MOOER introduces two new exciting additions to their beloved MSC series of electric guitars.
Both the MSC30 Pro and MSC31 Pro continue MOOER’s philosophy of creating affordable guitars, but without sacrificing quality or performance, thanks to the poplar bodies and flame maple tops. Some guitarists will be drawn to the bright tones of the MSC30 Pro’s maple fingerboard, whereas others will prefer the warmer resonance of the MSC31 Pro’s rosewood alternative.
Each guitar features sturdy bolt-on neck construction, dual-action steel truss rods, bone nuts, and MTN-1 chrome tuning pegs (with the BK upgrade being reserved for the MSC31 Pro), ensuring tuning stability and comfort at all times.At the heart of both models are MOOER’s versatile MSC pickups, comprising the MSC-1N single-coil neck pickup, the MSC-1M single-coil middle pickup, and the powerful MHB-1B dual-coil humbucker at the bridge. Further complemented by a versatile 5-way pickup selector and exclusive coil split switch, players can effortlessly switch between a wide palette of tones, such as pristine cleans ideal for jazz or blues, or high-gain tones for heavier genres.
Tremolo support is also provided through both the guitar's bridges, with the MSC30 Pro featuring an MTB-1 2 Point Tremolo bridge, and the MSC31 Pro boasting an exclusive black MTB-1 BK 2 Point Tremolo bridge. Both bridges guarantee guitarists the ability to use tremolo bars in their guitar performances, without compromising the integrity of tuning stability.
Both guitars come with a selection of vivid new colors, complementing the guitar’s hardware with undeniable visual appeal. The MSC30 Pro is available in the classic finishes of Sunset Red, Lake Blue, Lemon Green, and Rose Purple. Meanwhile, the MSC31 Pro boasts its own selection of glossy finishes: Grey Burst, Blue Burst, Green Burst, and Purple Burst.
Overall, the MSC30 Pro and MSC31 Pro solidify MOOER’s commitment to combining quality craftsmanship, affordability, and versatility, giving guitarists of all levels the chance to own instruments that genuinely inspire.
Features
MSC30 Pro:
- Classic S-style design
- Poplar body with flame maple top
- Maple fingerboard
- Maple neck with satin finish
- Bolt-on neck construction
- 22 nickel silver frets, Abalone dotted inlay
- Coil split switch and versatile 5-way pickup selector
- MSC-1N/M single-coil pickups and MHB-1B humbucker
- 25.5" scale
- MTN-1 Chrome tuning pegs
- Available in gloss-finished Sunset Red, Lake Blue, Lemon Green, and Rose Purple
- Volume and tone dial
- Chrome strap pin
MSC31 Pro:
- Classic S-style design
- Poplar body with flame maple top
- Rosewood fingerboard
- Maple neck with satin finish
- Bolt-on neck construction
- 22 nickel silver frets, White Shell dotted inlay
- Coil split switch and versatile 5-way pickup selector
- MSC-1N/M single-coil pickups and MHB-1B humbucker
- 25.5" scale
- MTN-1 BK tuning pegs
- Available in gloss-finished Grey Burst, Blue Burst, Green Burst, and Purple Burst
- Volume and tone dial
- Chrome strap pin
The MSC30 Pro and MSC31 Pro will both be available from the official distributors and retailers worldwide on 2nd April 2025.
MOOER Gives Bassists What They Want with the New MBJ410 and MBJ420 Electric Bass Guitar Models
For 15 years, MOOER has built a critically acclaimed name for itself thanks to its cutting-edge electric guitars, pedals, and accessories. While the company is no stranger to building electric bass guitars, this has not been its focus for some time, hence why so many bassists are excitedly anticipating the release of the MBJ410 and MBJ420 electric bass guitars.
Both the bass guitars sport glossy Poplar bodies, keeping the price point affordable but without limiting their tonal resonance and versatility, whereas the MBJ420 holds the additional bonus of being built with a Poplar Burl top. Complete with roasted maple C-shaped necks (also accented with a gloss finish) as well as Roasted Maple fingerboards and White Shell dot inlays, the necks are designed to offer as much comfort as possible–a high priority for bass guitarists.
A 34" fret scale further enhances practicality for bassists, as does the neck's 12" radius. Strings are available in .045, .065, .080, and .100 gauges, providing something for any type of bass style - whether slapping, plucking, or picking techniques are preferred.Thanks to the industry-standard components of a dual-action steel truss rod and bone nut, the tuning and resonant stability of both the MBJ410 and MBJ420 models are also of a high standard. However, this is accentuated further by the guitars' strong and reliable BTN-1 tuning pegs, essential for heavier-gauge bass strings.
The tonewoods and structural integrity of the MBJ-series electric bass guitars wouldn't be complete without the accompaniment of the guitar’s two single-coil JB-style pickups. Combined with the MOOER BSC-2 bridge, both bass guitars have been carefully designed to amplify bass resonances excellently, complemented even further by their simple but effective tone dials. Two volume controls are also built in, ensuring that bassists can customize their sonic output to have the perfect tonal blend.
In terms of standout features, the main difference between the two bass guitars is the MBJ420's added poplar burl top, but most notably, the color selections. For the MBJ410, the bass guitar is available in Gunmetal Gray, Metal Green, and Metal Blue, perfectly suiting the stages of higher-gain performances. In contrast, the aesthetics of the MBJ420 are more classic, purchasable in Red Burst, Blue Burst, and Tobacco Burst. Finally, both guitars are topped with a chrome strap pin, enabling stylish and energetic live performances.
Overall, bassists will no doubt be excited to see MOOER return to electric bass guitars with the MBJ410 and 420 models. Of course, electric guitars will remain the focus for the company, but the release of these two new products is a reminder of just how accommodating MOOER is for its wide audience of musicians.
Features
- Electric bass guitar built with gloss-finished Poplar body (MBJ420 also features a Poplar Burl Top)
- Roasted maple C-shaped neck with a gloss finish
- Roasted maple fingerboard
- White Shell dot inlay
- 12” neck radius
- MOOER BSC-2 bridge
- VBJ-1 and VBJ-2 Single Coil pickups
- MOOER BTN-1 tuning pegs
- Bolt-on construction
- Bone nut
- Dual-action steel truss rod
- Pre-installed strings available in .045, .065, .080, and .100 gauges
- 21 frets
- 34"fret scale
- Colors available in Gunmetal Gray, Metal Green, and Metal Blue (MBJ410), and Red Burst, Blue Burst, and Tobacco Burst (MBJ420)
- Chrome strap pin
- 2 x volume control dials
- 1 x Tone dial
The MBJ410 and MBJ420 will both be available from the official distributors and retailers worldwide on 29th April 2025 at an expected retail price of USD319/Euro299/GBP249(MBJ410), USD399/Euro379/GBP319(MBJ420).
The Oceans Abyss expands on Electro-Harmonix’s highly acclaimed reverb technology to deliver a truly immersive effects workstation. The pedal is centered around dual reverb engines that are independently programmable with full-stereo algorithms including Hall, Spring, Shimmer and more. Place these reverbs into a customizable signal path with additional FX blocks like Delay, Chorus, Tremolo, or Bit Crusher for a completely unique soundscape building experience.
Electro-Harmonix has paved the way for powerful, accessible reverbs since the release of the original Holy Grail and now we’ve pushed the envelope deeper with the fully-equipped Oceans Abyss. Featuring a customizable signal path with up to 8 effects blocks, the Oceans Abyss can be configured as individual reverb, modulation, EQ, delay, bit crusher, saturation or volume effects, or as countless combinations for incredibly creative effect shaping. From a simple Spring reverb to a lush stereo field featuring stereo hall and shimmer reverbs, chorus, delay, overdrive, and tremolo, you can go from surf to shoegaze instantly, without breaking a sweat.
Deep parameter editing is accessible via the high-visibility OLED display with multiple graphical views and easy-to-read designs. Expression/CV control over nearly every parameter gives artful control of your effects and dynamics. Fully-stereo I/O plus an FX Loop allows for use with any instrument, recording set up, or live rig. 128 programmable presets via onboard footswitching or MIDI ensure perfect recall in all performance situations. MIDI IN/OUT ports with MIDI IN support of PC, CC, and Tempo Clock expand the already immense talents of the Oceans Abyss. Connect with UBS-C to Windows or Mac for effects editing, preset management, and more with the free EHXport™ app (coming soon).
- Two Stereo Reverbs available at once, each fully pannable in the stereo field
- 10 reverb types to choose from: Room, Hall, Spring, Plate, Reverse, Dynamic, Auto-Infinite, Shimmer, Polyphonic, Resonant
- Additional FX blocks: Delay (Digital, Analog and Tape emulations), Tremolo, Chorus, Flanger, Phaser, Graphic EQ, Saturation, Bit Crusher, External FX Loop, Volume
- Create custom signal path routing with up to 8 effects blocks. Two blocks may be re-verb, the rest may be any of the additional FX blocks.
- Infinite reverb sustain with the press of a footswitch
- Stereo Audio I/O
- Stereo FX Loop routing on TRS Jacks
- Dual action footswitches allow for momentary or latching use
- Easily enable or disable tails
- 128 fully customizable presets
- All controls can be saved to presets
- Dive deep into global and preset settings to set up Oceans Abyss for your specific needs
- Illuminated slide pots and buttons
- High-visibility OLED graphical display
- Multiple graphical views: Signal Path, Performance, Settings, Physical, Explorer
- Easy-to-navigate menu system
- Ergonomic NavCoder knob allows rotary and directional navigation through menus
- EXPRESSION / CV input to control nearly any parameter in any FX block
- Footswitch input allows for adding up to three external footswitches, each assigna-ble to a number of functions
- MIDI In and Out. MIDI IN supports PC, CC (over nearly every available parameter), and Tempo Clock
- USB-C port to connect to Windows or Mac and interface with EHXport™ app (coming soon)
- 96kHz / 24-bit sample rate conversion
- Supplied with 9.6VDC / 500mA power supply
Our columnist’s silver-panel Fender Bandmaster.
How this longstanding, classic tube amp design evolved from its introduction in 1953.
I have a silver-panel Bandmaster Reverb that I don’t think I’ve talked about enough in this column. It’s one of the most versatile and flexible amps I own, so I use it for everything. It’s portable, has tube-driven reverb and tremolo, and has a full set of EQ knobs including the critical bright switch, which we discussed the importance of earlier this year (“How to ‘Trebleshoot’ a Vintage Fender Amp,” March 2025). The amp is not only pedal-friendly; the flexible 4-ohm output impedance will handle almost all speaker configurations and sound any way you’d like. Let’s take a deeper look at the Fender Bandmaster amp and walk through its development through the years.
The first Bandmaster was introduced in 1953 as a wide-panel tweed amp with Fender’s 5C7 circuit. This rare combo was loaded with a single 15" Jensen P15N and powered by dual 6L6GC tubes in push-pull configuration to produce a modest 25 watts. The 6L6GCs were cathode biased and along with the 5U4GB rectifier tube contributed to a forgiving sag, early breakup, and a midrange-y voice.
Fender made several changes when they launched that amp’s successor in 1955, the more widely known 5E7 narrow-panel Bandmaster, a well-proven amp that has come back as a reissue model. It was still a dual-channel amp—instrument and microphone—but the newer 5E7 model had a fixed bias and a negative feedback loop, providing a louder, firmer, and cleaner tone. Most importantly, the single 15" speaker was replaced by three 10" speakers, making it very similar to the narrow-panel tweed Bassman, the granddaddy of all Marshall amps. This Bandmaster had three speakers instead of the Bassman’s four, and it delivered 25–30 watts instead of 40. It offered early breakup with a midrange-y, big and full tone.
For those not acquainted with tweed amps, the volume and EQ knobs behave differently than on silver- and black-panel Fender amps. The volume pot can act like a distortion control, while the EQ knobs control the volume, and many players I’ve talked to have not really unlocked this secret. This works because, in these circuits, the volume pot sits right before the preamp tube, which allows it to push the tube into full distortion. Since the EQ pots are located right after and are capable of reducing the volume, you’re able to distort the preamp at low volume settings.
“Things became more standardized in 1964 with the arrival of the black-panel AB763 Bandmaster, an amp I have worked on a lot and appreciate for its robustness, simplicity, and versatility.”
In 1960, a short-lived and rare Bandmaster dressed in brown tolex and a black faceplate appeared with the 5G7 circuit. From here on, all Bandmasters had the modern top-mounted chassis. With this circuit, the Bandmaster started to both look and sound more like a black-panel amp. It kept the 3x10" speakers but got a diode rectifier and bigger transformers resulting in a 45-watt output. Tremolo was introduced for the first time, and both channels were now intended for guitar.
The following year, a blonde 6G7 Bandmaster followed as a smaller amp head paired with a 1x12 extension cabinet. It had the timeless early blonde looks with cream tolex, brown faceplate, oxblood grill cloth, large Fender logo, and white knobs. But halfway into the blonde era, towards 1964, things turned strange and rather confusing. There were suddenly two 12" speakers, black knobs, a wheat-colored grill cloth, a more slim black-panel-style Fender logo, a black faceplate, and all in various combinations close to the transition into ’64.
Things became more standardized in 1964 with the arrival of the black-panel AB763 Bandmaster, an amp I have worked on a lot and appreciate for its robustness, simplicity, and versatility. It offers a pure, clean, scooped black-panel tone that’s somewhere between a Vibrolux Reverb and Pro Reverb, which share the medium-sized 125A6A output transformer and dual 6L6GC tubes. With its medium/high power and flexible 4-ohm output impedance, it can drive all kinds of speaker cabinets—as long as you stay between 2 and 8 ohms, you are safe.
For a short time in 1967–68, there was a transitional Bandmaster with aluminum trim and black-panel innards before the all-new silver-panel Bandmaster Reverb replaced it in 1968. The small-head cabinet had grown in size and, unfortunately, weight to accommodate the reverb tank. The amp got a 5U4GB rectifier tube along with a few general silver-panel changes to the circuit. Several silver-panel models existed with minor differences until a 70-watt beast version came along in 1977 with master volume.
To my own 1968 Bandmaster Reverb, I have done a few adjustments. First, I made a custom baffle to hold two 8" speakers. I installed a pair of WGS G8C speakers that fit perfectly on the baffle board without colliding with the reverb tank or transformers. Sometimes, I use only one of the 8" speakers for bedroom volume levels. Second, I reversed the bias circuitry to standard AB763 specs, making it easier to adjust bias correctly on both power tubes. If you are into sparkling clean and funky Strat sounds, you would love this little 2x8" combo.