
Sometimes a guitar’s bolt-on neck needs a shim. Find out why and learn how to shim a neck the right way.
Recently a client brought an older Fender Telecaster into the shop for a setup. The action was really high, but the saddles had run out of adjustment and couldn't drop any lower. After careful inspection, I determined that the neck needed a shim to fix the problem. Fortunately, shimming a bolt-on neck isn't too hard. In fact, if you're handy with basic tools you can do this yourself, but you need to understand the process and know what mistakes to avoid. Let's investigate.
Understanding Neck Angle.
Fig. 1. This neck angle is too low, so even dropping the saddles flush to the bridge plate won't bring the strings close enough to the fretboard to play comfortably.
Our journey begins with neck angle, which is the pitch of the neck relative to the guitar's body and bridge. When the neck angle is set correctly, an electric guitar's saddles can be raised or lowered to create comfortable playing action and optimum tone and sustain.
But when the neck angle is too low (Fig. 1), the saddles can't be moved down enough to bring the strings close to the frets. The guitar is hard to play and the intonation suffers. Conversely, when the neck angle is too high (Fig. 2), you can't raise the strings enough to prevent fretting out or buzzing—even when the saddles are adjusted to their maximum height.
Fig. 2. This neck angle is too high. The guitar is unplayable even with the saddles raised to their maximum height.
In this column, we'll learn how to fix a neck angle that's too low. Typically, this problem can be resolved using a shim (Fig. 3).
Fig. 3. A full-pocket neck shim can correct a neck angle that's too low.
What causes a neck angle that's too low? Most players don't realize that an electric guitar can compress over time. As an instrument ages, constant string tension can cause the body to become slightly concave, and this changes the neck angle. This doesn't occur with every guitar, but it is common.
Many experts say that the angle for a bolt-on neck should be between zero and five degrees. From my experience, this is correct in most cases. But what I find even more important is how you adjust the neck to its optimal angle. When this is done properly, your guitar will play and sound at its best. When the neck angle is adjusted improperly, it can ruin a perfectly good neck.
If your guitar plays well and the saddles offer enough adjustment range for you to set the action correctly, you don't need to change anything. However, if the angle is too low and you can't move the saddles down any further, the neck needs a shim.
Fig. 4. A shim made from a Popsicle stick or scraps of wood leaves a gap between the neck pocket and neck. Eventually, pressure from the neck screws will warp the neck as it tries to fill the void.
Shimming dos and don'ts. I've seen just about every type of material used to shim a neck, including a matchbook cover, metal washers, a broken Popsicle stick, wood scraps (Fig. 4), and a guitar pick (Fig. 5).
Fig. 5. Another no-no: Using a guitar pick as a shim.
For starters, don't use paper or plastic, and above all, only use a "full-pocket" shim. Here's why a full-pocket shim is essential: When someone uses, say, a matchbook cover or guitar pick, it leaves a gap between the body and neck. Over time, the screws holding the neck force it to fill that void. As a result, the neck warps and the end of the fretboard looks like a ski jump. Next thing you know, the fretboard has to be sanded to remove the warp and then refretted. If you're lucky, the neck will have a thick enough fretboard to allow resurfacing. If not, the neck is a total loss. Either way, it's going to cost you hundreds of dollars.
To avoid these problems, use a full-pocket shim that fits inside the entire neck pocket and is shaped like a thin wedge, with the slightly taller end facing the bridge This raises the end of the fretboard just a bit, which is what you want when correcting a neck angle that's too low.
What You'll Need.
The best material for a shim is a thin piece of maple veneer. Most bolt-on necks are made of maple, so it makes sense to make a shim from the same material. The wood can be easily shaped to fit the neck pocket and angled to the proper degree. I typically start with a piece of maple about .060" thick.
The project requires a small hobby saw, 80-grit self-adhesive sandpaper attached to a flat plastic or wood sanding block, a belt sander, a hole punch, a pencil, and some superglue.
Fig. 6. Tracing the neck heel contours onto a full-pocket maple shim.
Crafting a Shim.
Use a hobby saw to cut out a rectangular piece of wood that's slightly wider and a bit longer than the neck pocket. Begin by tracing the neck heel onto your rectangular piece of maple (Fig. 6). Next, using the 80-grit sandpaper or a belt sander, trim the wood along the neck-heel line. Frequently check your progress to assure a close fit (Fig. 7).
Fig. 7. Checking how the shim fits into the neck pocket.
When you've shaped the shim so it sits securely inside the neck pocket, trim off any excess length. Using the rear edge of the neck pocket as a ruler, mark the trim line on the shim, remove the extra wood with the hobby saw, and then sand the edge smooth.
Fig. 8. Using a pencil to mark the bottom of the shim before sanding it into a subtle wedge.
Once the shim fits the neck pocket, the next step is to shade its entire bottom with a pencil (Fig. 8). This will help you know where to sand and how much material to remove.
Fig. 9. Getting ready to sand the shim to its proper thickness and angle.
Next, place the shim on the belt sander—make sure it's turned off—with the shaded side face down. Lay your sanding block on top of the shim with the 80-grit paper against the wood (Fig. 9).
Holding the block, turn on the belt sander while keeping pressure on the block. Apply more pressure to the end of the shim that will face the headstock. This will create the subtle wedge shape you need to correct a neck angle that's too low.
Fig. 10. Checking the bottom of the shim to confirm that the end facing the headstock is sanded a bit thinner than the end facing the bridge. The pencil marks tell the story.
Frequently check the bottom of the shim to make sure it's getting sanded evenly from side to side, but developing a slight front-to-back angle (Fig. 10). This is where the pencil marks come in handy.
Don't sand away too much wood—you'll have a chance to check your shim depth and angle in a few minutes when you string up for the first time. If need be, you can return to the sander to remove a little more wood from the bottom of the shim. By working incrementally, you won't have to start from scratch again.
Once you've sanded the shim into a subtle wedge and smoothed the top, it's time to punch holes to accommodate the four neck screws. Place the shim into the neck pocket with the shaded side down. Be sure it's oriented so the thicker end of the wedge faces the bridge. Insert the neck bolts and gently turn them until they each make a shallow impression in the shim.
Remove the shim and place a few drops of superglue around each screw-tip impression to reinforce the wood where you'll be punching holes for the neck screws.
Fig. 11. Punching holes for the neck screws after reinforcing the screw-tip impressions with superglue.
Using the screw impressions to center your punch tool, make four holes in the shim. Work slowly and carefully to avoid cracking the shim as you punch holes in it (Fig. 11).
Following the same orientation described above, reinsert the shim into the neck pocket. Bolt the neck onto the body, string up, and tune the guitar to pitch. From there, measure the action and test playability.
Remember: The problem you're correcting is a low neck angle that prevented you from adjusting the saddles down far enough to create comfortable action. The shim is working properly if you can use the saddle screws to set the action the way you like it. The saddle screws should offer sufficient adjustment range to lower or raise the action.
If the action is too low with the shim in place—even with the saddles raised—you need to remove the shim and sand it thinner. It may take several attempts to achieve the correct thickness and angle. Carving a shim takes time and patience, but the reward is well worth the effort.
Tilt-Screw Syndrome
Fig. 12. The micro-tilt neck adjustment system uses an Allen screw to press against a metal disc embedded in the neck heel.
Some electric guitars have a "micro-tilt" assembly in the neck pocket (Fig. 12). By inserting a hex wrench through a hole in the neck plate, you can push an Allen screw against a metal disc embedded in the neck heel and adjust the neck angle without using a shim. This invention, in my opinion, is a great way to force the end of the neck to warp or bow. If your guitar has micro-tilt hardware, I'd remove the Allen adjustment screw from the body and simply bolt the neck flat against the pocket. If the neck angle is too low, use a full-pocket shim to correct the problem.
[Updated 9/1/21]
- DIY: How to Set Up a Fender Stratocaster - Premier Guitar ›
- How to Balance Pickups on Strats and Teles - Premier Guitar ›
- How to Get the Most Out of Your Delay Pedal - Premier Guitar ›
- Time for a Neck Adjustment? - Premier Guitar | The best guitar and bass reviews, videos, and interviews on the web. ›
- Time for a Neck Adjustment? - Premier Guitar ›
- DIY: How to Refinish Your Axe - Premier Guitar ›
- Tone Tips: A Crash Course on Buffers - Premier Guitar ›
- Guitar Shop 101: “Decking” a Stratocaster Trem - Premier Guitar ›
- Reader Guitar of the Month: T-Style Chickadee - Premier Guitar ›
- Time for a Neck Adjustment? - Premier Guitar ›
- Time for a Neck Adjustment? - Premier Guitar ›
- The Inexpensive, Everyday Tools That Live on My Workbench - Premier Guitar ›
See and hear Taylor’s Legacy Collection guitars played by his successor, Andy Powers.
Last year, Taylor Guitars capped its 50th Anniversary by introducing a new guitar collection celebrating the contributions of co-founders Bob Taylor and Kurt Listug to the guitar world. The Legacy Collection revives five of Bob Taylor’s classic acoustic models, curated by the legendary luthier and innovator himself. “To imagine that we’re doing guitars that harken to our past, our present and our future all at the same time,” Bob says, “I really like that.”
In developing the collection, Bob preserved the essence of his originals while integrating performance and playability upgrades introduced during his tenure as designer-in-chief. “It’s an up-to-date version of what those guitars would be,” Bob explains, “but with the same sound.”
Visually, these guitars feel classic—clean, understated and unmistakably Taylor. While Bob’s original aesthetic preferences are showcased in his Legacy models, the nod to the past runs deeper than trade dress.
From his earliest builds, Bob favored slim-profile necks because he found them easier to play. That preference set a design precedent that established Taylor’s reputation for smooth-playing, comfortable necks. Legacy models feature slim mahogany necks built with Taylor's patented New Technology (NT) design. “My first neck was a bolted-on neck but not an NT neck,” Bob says. “These are NT necks because it’s a better neck.” Introduced in 1999, the NT neck allowed for unprecedented micro-adjustability while offering a consistent, hand-friendly Taylor playing experience.
What makes this collection unique within the Taylor line is Bob’s use of his X-bracing architecture, favoring his time-tested internal voicing framework over more recent Taylor bracing innovations to evoke a distinctive tone profile. Since Andy Powers—Taylor’s current Chief Guitar Designer, President and CEO—debuted his patented V-Class bracing in 2018, V-Class has become a staple in Taylor’s premium-performance guitars. Still, Bob’s X-bracing pattern produces a richly textured sound with pleasing volume, balance and clarity that long defined the Taylor voice. All Legacy models feature LR Baggs VTC Element electronics, which Bob says “harkens back to those days.”
The team at Taylor thought the best way to demonstrate the sound of the Legacy guitars was to ask Andy Powers, Bob’s successor, to play them. A world-class luthier and musician, Andy has spent the past 14 years leading Taylor’s guitar innovation. In addition to V-Class bracing, his contributions include the Grand Pacific body style, the ultra-refined Builder’s Edition Collection, and most recently, the stunning Gold Label Collection.
Below you’ll find a series of videos that feature Powers playing each Legacy model along with information about the guitars.
Legacy 800 Series Models
First launched in 1975, the 800 Series was Taylor’s first official guitar series. Today, it remains home to some of the brand’s most acclaimed instruments, including the flagship 814ce, Builder’s Edition 814ce and new Gold Label 814e.
The Legacy 800 Series features the 810e Dreadnought and two Jumbos: the 6-string 815e and 12-string 855e. Each model serves up a refined version of the Dreadnought and Jumbo body shapes Bob inherited from Sam Radding—the original owner of the American Dream music shop where Bob and Kurt first met. “I was making my guitars in the molds that Sam had made at American Dream,” Bob recalls. “There was a Jumbo and a Dreadnought. That’s all we had.”
All three Legacy 800 Series guitars feature one of Bob’s favorite tonewood combos. Solid Indian rosewood back and sides are paired with a Sitka spruce top, yielding warm lows, clear trebles and a scooped midrange.
Aesthetic appointments include a three-ring abalone rosette, mother-of-pearl Large Diamond inlays, white binding around the body and fretboard, and Bob’s “straight-ear” peghead design. Both Jumbo models also showcase a mustache-style ebony bridge—a nod to Bob’s early Jumbo builds.
Legacy 810e
The 810 Dreadnought holds a special place in Bob Taylor’s heart. “My first 810, the one I made for myself, was a thrilling guitar for me to make,” he says. “It’s the one and only guitar I played. It didn’t matter how many guitars we made at Taylor, that’s the one I took out and played.” The Legacy 810e brings back that bold, room-filling Dreadnought voice along with the easy playability expected from a Taylor.
Taylor Guitars | Legacy 810e | Playthrough Demo
Legacy 855e
Taylor’s first 12-strings found an audience in 1970s Los Angeles. “I was making guitars that would find their way to McCabe’s in Santa Monica and Westwood Music,” Bob says, “and these guitars were easy to play. Twelve-strings were a popular sound in that music. It was a modern country/folk/rock music genre that was accepting our guitars because they were easy to play. They also liked the sound of them because our guitars were easier to record.” The Legacy 855e, with its resonant Jumbo body, slim neck and gorgeous octave sparkle, carries that tradition forward.
Taylor Guitars | Legacy 855e | Playthrough Demo
Legacy 815e
The Legacy 815e revives Taylor’s original Jumbo 6-string, delivering a big, lush sound with beautifully blooming overtones.
Legacy Grand Auditoriums
In the early 1990s, Bob Taylor heard a consistent refrain from dealers: “Not everybody wants a dreadnought guitar anymore.” Players were asking for something with comparable volume but different proportions—something more comfortable, yet still powerful. This feedback inspired Bob to design a new body style with more elegant curves, more accommodating proportions and a balanced tonal response. The result was the Grand Auditorium, which Taylor introduced in 1994 to celebrate its 20th anniversary.
Thanks to its musical versatility and easy playability, Bob’s Grand Auditorium attracted a wide variety of players. “We came into our own with our Grand Auditorium,” he says. “People were describing it as ‘all around.’ It’s a good strummer and good for fingerstyle, but it’s not totally geared toward strumming or totally geared toward fingerstyle.” Also referred to as the “Swiss-Army Knife” of guitars or the “Goldilocks” guitar, the GA quickly became a favorite among guitarists across playing styles, musical genres and different playing applications including recording and live performance. “That guitar made studio work successful,” Bob says. It gained a wider fanbase with the debut of the “ce” version, which introduced a Venetian cutaway and onboard electronics. “That became one of our hallmarks,” says Bob. “If you want to plug in your guitar, buy a Taylor.”
Today, the Grand Auditorium is Taylor’s best-selling body shape.
The Legacy Collection features two cedar-top Grand Auditoriums inspired by past favorites: the mahogany/cedar 514ce and rosewood/cedar 714ce. Both models incorporate Bob’s original X-bracing pattern for a tonal character reminiscent of their 1990s and 2000s counterparts. Shared aesthetic details include a green abalone three-ring rosette, ebony bridge pins with green abalone dots, a faux-tortoiseshell pickguard and Taylor gold tuning machines.
Taylor Guitars | Legacy 815e | Playthrough Demo
Legacy 514ce
The Legacy 514ce features solid mahogany back and sides paired with a Western Red cedar top, yielding a punchy midrange and dry, woody sonic personality that pairs beautifully with cedar’s soft-touch sensitivity and warmth. It’s a standout choice for fingerstyle players and light strummers who crave nuance and depth. Distinct visual details include faux-tortoise body and fretboard binding, black-and-white top trim, and mother-of-pearl small diamond fretboard inlays.
Taylor Guitars | Legacy 514ce | Playthrough Demo
Legacy 714ce
The Legacy 714ce also features a cedar top, this time matched with solid Indian rosewood back and sides. The result is a richly textured sound with deep lows, clear trebles and a warm, mellow response. Inspiring as it is, this specific wood pairing isn’t currently offered in any other standard Taylor model. Additional aesthetic details include green abalone dot fretboard inlays, black body and fretboard binding, and black-and-white “pinstripe” body purfling.
While the Legacy Collection spotlights Taylor’s past, newer models from the Gold Label, Builder’s Edition and Somos Collections show the company’s legacy is always evolving. Explore the Legacy Collection at taylorguitars.com or visit your local authorized Taylor dealer.
Taylor Guitars | Legacy 714ce | Playthrough Demo
Taylor Guitars, one of the world’s leading acoustic guitar brands, has teamed up with Sony Pictures Consumer Products and HBO®to unveil a replica of the acoustic guitar featured in the award-winning HBO Original series The Last of Us, which is now streaming its second season on Max. This collaboration brings fans and musicians alike an exact replica of the guitar Joel gives Ellie in the critically acclaimed show.
Taylor’s The Last of Us Replica 314c guitar is based on its best-selling 300 Series and features Taylor’s most popular body style, the Grand Auditorium. Crafted with Taylor’s hallmark playability, pro-level sound and refined workmanship, the guitar showcases a visual aesthetic that matches the guitar featured in the series.
For fans of the show, the guitar’s most recognizable design element is a custom moth inlay at the third fret. The guitar also features a Tobacco Sunburst top finish and grained ivoroid accents, along with a satin-finish body and neck, creating a vintage, well-worn aesthetic that fits seamlessly into the gritty post-pandemic world Joel and Ellie inhabit.
This acoustic-only model features a solid Sitka spruce top and solid sapele back and sides, delivering a clear, warm, balanced voice with appealing midrange presence — an ideal sonic tool for storytelling through song. Additional appointments include grained ivoroid body binding, grained ivoroid fretboard inlays that include the moth and large dot position markers, and a custom double-ring rosette also in grained ivoroid. The Grand Auditorium body features a Venetian cutaway for easy access to upper-register notes. Each guitar comes with a Taylor-built deluxe hardshell case to ensure safe transport, whether across the country or across the quarantine zone.
Built for the Journey Ahead
“The Last of Us is a story of resilience, connection and finding beauty amid harsh realities — themes that resonate with the emotional expression a Taylor guitar offers players,” says Tim O’Brien, Vice President of Marketing at Taylor Guitars. “We’re honored to collaborate with HBO and Sony Pictures Consumer Products to bring this iconic instrument to fans and players alike.”
Availability and Ordering
The Taylor x The Last of Us Replica guitar is available for purchase now via TaylorGuitars.comand select authorized Taylor dealers. Orders are built on demand in Taylor’s Southern California factory, with an expected delivery time of 6–10 weeks. Due to the nature of this release, quantities are limited.
Whether you’re a musician, collector or a devoted fan of the series, this guitar offers a one-of-a kind connection to the legacy of Joel, Ellie and the enduring spirit of survival.
Guest picker Ally Venable
Blues rocker Ally Venable joins PG’s editors to imagine what their dream late-night band would sound like.
Question: What’s your dream late-night show band?
Ally Venable - Guest Picker
By FifthLegend from Eagan, Minnesota, United States of America - Thundercat, CC BY 2.0, https://commons.wikimedia.org/w/index.php?curid=70617212
A: For my late-night show's house band, I’ve assembled a dream team. This ensemble inspires me with their unparalleled musical talents and diverse backgrounds. Chris Layton’s drumming is unmatched and he will provide a solid foundation. I’ll have Jon Batiste on keys. His creativity and energy is boundless. Eric Gales would be on guitar. I love how emotive his music is, and I strive for that type of connection within my playing as well. Finally, I’d have Thundercat on bass. His playing is infused with jazz and funk sensibilities that would tie the whole sound together in an interesting way.
Obsession: My current obsession is shifting my approach to playing—focusing on connection over applause. Instead of chasing technical perfection or crowd reactions, I’m leaning into the emotional and spiritual side of music. It’s about creating moments that resonate deeply, whether it’s with myself, my bandmates, or the audience.
David Saenger - Reader of the Month
A: I love the idea of supergroups and how each of the players would interact. On guitars I would have Nuno Bettencourt (Extreme) and Isaiah Sharkey. My drum and bass combo would be Stewart Copeland (The Police) and Mohini Dey. On keys and sax, I would have Herbie Hancock and Joshua Redman. My male and female vocalists would be Corey Glover (Living Colour) and Liv Warfield (Prince). All of these players are fantastic improvisers and really know how to put on an entertaining show in any genre.
Bassist Victor Wooten
Obsession: My current obsession has been bass. My 12-year-old daughter started playing electric and upright bass about two years ago, and it’s been a blast working with her. I’ve been really focusing on having a solid pocket, and it’s forced me to get better at reading bass clef. I’m taking her to see Victor Wooten next week. Can’t wait!
Jason Shadrick - Managing Editor
Jason Shadrick on the SNL stage.
A: The natural move would be to go for a high-energy party band decked out with multiple keyboards, horns, and vocalists. I’d go a different route. I’d go for a more rootsy vibe with Blake Mills leading a band consisting of Jay Bellerose on drums, esperanza spalding on bass, Bob Reynolds on saxophones, and a rotating guest each week. They could cover lo-fi Americana, funky open-tuned blues, and so much more.
Obsession: This month is slightly less obsession and more reflection as this will be my last issue as Managing Editor for PG. Over the last 15 years I’ve worked on 182 issues, which is kinda mind-boggling. I’ve been lucky enough to do some incredible things during my time at PG, including walking through the host door at SNL and spending a few minutes with Brian May. Never could have imagined it. I am very grateful.
Nick Millevoi - Senior Editor
A: I’ve long said that joining one of the late night bands would probably be my absolute top dream gig. So, if I were choosing my own late-night band, from any era, I would go no further than getting a chance to sit with Paul Schaffer and the World’s Most Dangerous Band or G.E. Smith-era Saturday Night Live Band.
Obsession: The late guitarist Jef Lee Johnson, who spent time in Schaffer’s band, had a heavy resume that included stars of all genres from Billy Joel to the Roots to McCoy Tyner. I got to see him play some low-key gigs around Philly, and each rearranged my molecules. It’s only now, years after his 2013 death, that I’ve become obsessed with his discography. Though much of his work was as a high-level sideman, his albums show the broad range of this masterful guitarist, whose tone, feel, and phrasing conveyed the instrument’s deepest emotional capabilities.
At its core is GTRS’ upgraded G151 intelligent system, offering 128 onboard effects, MNRS amp and cab sims, and even 17 guitar emulations—exclusive to this model. Everything is controlled via the eye-catching Super Knob, which changes color to match your preset, as well as through the Bluetooth-connectible GTRS app.
GTRS’ W902 features select tonewoods and construction: an alder body, poplar burl top, and a sleek bolt-on 5-piece neck made from roasted flame maple and rosewood, with satin natural finish and a rosewood fingerboard. The fanned fret design features 24 white copper frets and a stainless zero fret. A pair of GTRS Alnico V pickups and an HL-II bridge deliver a resonant tone, made particularly versatile thanks to the 5-way tone switch and tone knob.
The W902 offers a truly innovative choice for tech-savvy guitarists. Its features include a wireless transmitter, OTG recording, an 80-second looper, metronomes, and a drum machine, the app-supported guitar boasts up to 12 hours of playtime on a single charge (9 hours with the wireless transmitter in use).
The W902 is an upgraded version of the original W900 Intelligent Guitar, and the W902 most notably features an upgraded GTRS Intelligent Processor System, the G151, which even offers upgrades over the GTRS SL810's recently announced G150 system. The G151 system comes with a staggering 128 effects pre-installed, along with 10 of both MOOER's in-house MNRS amp and cabinet simulation profiles. Exclusive to the W902, the G151 system even includes 17 guitar simulation effects, allowing guitarists to emulate the tonal resonance of some of their favorite guitars.
To activate and browse through presets within the G151 system, which can be connected via Bluetooth 5.0, guitarists can use the guitar's Super Knob, which lights up in different LED colors depending on which preset is activated. Of course, users are able to get stuck into and edit the effects chains of presets through the GTRS app, enabling them to craft their own favorites through their mobile device. The guitar still functions without the G151 system; the Super Knob just needs to be turned off, and the W902 is usable as a regular electric guitar.
Within the GTRS app, there is even an 80-second looper, 10 metronomes, and 40 drum machine grooves built in, providing users with an all-in-one suite for guitar practice and composition. This is especially the case when combined with the W902's OTG-recording support, enabling on-the-go recording without the need for a hardware recording setup.
The W902 comes bundled with a GTRS Deluxe gig bag, three guitar wrenches, a USB 3.0 cable for charging, and a user manual. The guitar even contains a wireless transmitter and an integrated 4000mAh Li-ion battery, providing up to 12 hours of continuous use (9 hours with the transmitter in use), allowing users to enjoy the G151 system through headphones or an amplifier.
Guitarists who want to experiment further with the W902’s technology can connect the intelligent system to the GTRS GWF4 wireless footswitch, which is ideal for switching between presets in live scenarios when control through a mobile device isn't practical.
GTRS W902 Guitar construction features:
- Alder Body, 5-Piece Selected Roasted Flame Maple and Rosewood Neck with Satin Natural Finish (C-Shape)
- Bolt-on neck, 25-1/2" scale length, with dual action steel truss rod
- Rosewood fingerboard, 12” radius, 24 white copper (0 fret stainless) fanned frets
- Built-in wireless transmitter
- Super Knob, Volume Control Knob, and Tone Knob, 3-way tone-selection switch
- GLB-P1 Li-ion Battery (4000mAh, up to 12 hours of continuous use, 9 hours with the wireless transmitter in use)
- USB port for charging and OTG recording
- GTRS Deluxe gig bag, 3 guitar wrenches
GTRS G151 Intelligent Guitar System features:
- GTRS G151 Intelligent Processing System (and GTRS App)
- 128 effects, 10 MNRS amp (GNR) and cabinet (GIR) simulation models
- 17 guitar simulations
- 80-second looper, 40 drum machine grooves, 10 metronomes
- Bluetooth 5.0 connectivity
- GTRS GWF4 wireless footswitch support (sold separately)
The GTRS W902 is now available worldwide. For more information visit www.gtrs.tech.