This Premier Guitar Web Site (the "Web Site") is provided to you by Gearhead Communications, LLC ("Gearhead Communications"). Access to and use of the Web Site and the services available on the Web Site are subject to the following terms and conditions in this Terms of Use and Privacy Policy. By accessing or using the Web Site, you agree to be legally bound by the terms and conditions set forth below without any modification. Please review them carefully.
© Gearhead Communications, LLC
2024
All Rights Reserved
The copyright on this entire Web Site is held by Gearhead Communications. All material provided on the Web Site is protected under United States copyright laws and international copyright laws and treaty provisions. Except as expressly provided herein, none of the material provided on the Web Site may be copied, distributed, republished, reproduced, downloaded, displayed or transmitted in any form for commercial use without prior written permission of Gearhead Communications. Individual visitors of the Web Site are permitted personal, non-commercial use, provided that they do not modify the materials on the Web Site and that the materials retain all copyright and other proprietary notices contained therein. The permission terminates automatically if you breach any of the terms and conditions contained in this notice. Gearhead Communications does not grant any express or implied right to you under any patents, trademarks, copyrights, or trade secret laws.
The trademarks, logos, and service marks (collectively referred to as "Trademarks") displayed on this Web Site are federally registered and unregistered Trademarks of Gearhead Communications and no trademark license either express or implied is granted by Gearhead Communications. You do not have any right to use the Trademarks displayed on this Web Site without prior written permission of Gearhead Communications. In the event of unauthorized use or misuse of its Trademarks, Gearhead Communications will pursue its legal remedies without delay.
ELECTRONIC INFORMATION SUBMITTED TO THE WEB SITE
Any communication or material other than your personal information submitted to the Web Site by electronic mail is the exclusive property of Gearhead Communications and is considered to be non-confidential and non-proprietary. Such communication may include, without limitation, questions, comments, suggestions, and ideas. Gearhead Communications shall be free to use them for any purpose whatsoever without restriction or compensation.
DMCA NOTICE
Gearhead Communications respects the intellectual property of others, and we ask our content partners and those posting to this Web Site to do the same. If you believe that your copyrighted work has been copied and is accessible on this Web Site in a way that constitutes copyright infringement, you may notify us by providing our copyright agent with sufficient information to allow us to locate the material, including the following information:
- The electronic or physical signature of the owner of the copyright or the person authorized to act on the owner's behalf.
- A description of the copyrighted work that you claim has been infringed and a description of the infringing activity.
- Identification of the location where the original or an authorized copy of the copyrighted work exists; for example, the URL of the web site where it is posted or the name of the book in which it has been published.
- Identification of the URL or other specific location on this web site where the material that you claim is infringing is located.
- Your name, address, telephone number, and email address.
- A statement by you that you have a good faith belief that the disputed use is not authorized by the copyright owner, its agent, or the law.
- A statement by you, that the above information you provide us is accurate and that you are the copyright owner or are authorized to act on the behalf of the copyright owner.
Our agent for notice of claims of copyright infringement on this Web Site can be reached as follows:
By Mail:
Gearhead Communications, LLC
Patti Erenberger
3 Research Center
Marion, IA 52302
By Phone: (319) 447-5550
By Fax: (319) 447-5599
By Email: patti [at] premierguitar.com
DISCLAIMER
THE INFORMATION IN THIS WEB SITE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. GEARHEAD COMMUNICATIONS SHALL NOT BE RESPONSIBLE FOR ANY ERRORS, OMISSIONS, OR TECHNICAL INACCURACIES IN THIS WEB SITE.
Gearhead Communications is constantly improving its products and services and reserves the right to make such improvements or changes to this Web Site, the materials, products, services, or prices posted on this Web Site without prior notice, as it deems necessary.
PRIVACY
Gearhead Communications is committed to protecting your privacy. Gearhead Communications and its affiliates collect personal information from its users in limited situations as set forth in this Terms of Use and Privacy Policy. Unless otherwise indicated, Gearhead Communications and its affiliates will only disclose personally identifiable information to third parties when required by law or in the good faith belief that such action is necessary in order to conform to the edicts of the law or comply with the legal process served on this Web Site. Unless otherwise stated in this Terms of Use and Privacy Policy, Gearhead Communications and its affiliates will not rent, sell or give your personally identifiable information to any outside party without your prior permission. Gearhead Communications and its affiliates may now or in the future use personally identifiable information, such as email addresses submitted by users, to contact users and third parties and provide information on internal promotions of Premier Guitar and its affiliates. If and when this feature becomes available, users will be given the option to opt out of receiving such promotions.
You are responsible for taking all reasonable steps to ensure that no unauthorized person shall have access to your Web Site password or account. You are solely responsible for:
- Controlling dissemination and use of your user name, member ID and/or password;
- Authorizing, monitoring and controlling access to and use of your Web Site user name, member ID or password; and
- Promptly informing Gearhead Communications of any need to deactivate a password.
You grant Gearhead Communications and its affiliates the right to transmit, monitor, retrieve, store and use your information in connection with the operation of the Web Site. Gearhead Communications and its affiliates cannot and do not assume any responsibility or liability for any information you submit for your or any third party's use or misuse of the information transmitted or received using their web site.
PUBLIC AREAS
The Web Site may now or in the future provide users opportunities to comment on articles posted on the Web Site and to access public areas including chat rooms, bulletin boards or other online communities. By posting comments or using any public area on the Web Site, you agree that you are solely responsible for your own communications, the consequences of posting such communications, and your reliance on any such communications found in the public areas. Gearhead Communications assumes no responsibility for the consequences of any communications in the public areas.
By using the public areas, you agree that the following actions constitute a material breach of this Terms of Use and Privacy Policy:
- Using a public area for any purpose in violation of local, state, national or international law;
- Posting any material in a public area that infringes the intellectual property rights of others or the privacy or publicity rights of others;
- Posting any material that is unlawful, obscene, defamatory, threatening, harassing, abusive, slanderous, hateful or embarrassing to any other person or entity as determined by Gearhead Communications in its sole discretion;
- Posting advertisements or solicitations of business;
- Upon receiving a warning, continuing to disrupt the normal flow of dialogue or posting comments that are not related to the topic being discussed;
- Posting chain letters or pyramid schemes;
- Impersonating another person;
- Distributing viruses or other harmful computer code;
- Harvesting or otherwise collecting information about others, including e-mail addresses, without their identification for posting or viewing comments;
- Allowing any other person or entity to use your identification for posting or viewing comments;
- Posting the same note more than once or "spamming"; or
- Engaging in any other conduct that restricts or inhibits any other person from using or enjoying the public areas or the Web Site, or which in the judgment of Gearhead Communications exposes Gearhead Communications, its affiliates or licensors to any liability or detriment of any type.
Gearhead Communications reserves the right to record the dialogue in any public areas. Gearhead Communications does not screen communications in advance and is not responsible for screening or monitoring material posted by any user. If notified by a user of communications which are alleged not to conform to this Terms of Use and Privacy Policy, Gearhead Communications may investigate the allegation and determine in its sole discretion to remove or request the removal of communications. Gearhead Communications reserves the right to remove communications which are abusive, illegal, disruptive or that otherwise fail to conform to this Terms of Use and Privacy Policy. In addition to the removal rights described above, Gearhead Communications reserves the right to terminate any user access to any or all public areas upon user's breach of this Terms of Use and Privacy Policy. Gearhead Communications reserves the right (but is not obligated) to edit or delete any communications posted on any public area, regardless of whether such communications violate these standards for conduct.
Gearhead Communications reserves the right to take any action it deems necessary to protect the personal safety of its users or the public. Gearhead Communications has no liability or responsibility to users of the Web Site or any other person or entity for performance or non-performance of the aforementioned activities.
CHILDREN'S PRIVACY
We are committed to protecting the privacy of children. You should be aware that the Web Site is not intended or designed to attract children under the age of thirteen (13). We do not collect personally identifiable information from any person we actually know is a child under the age of thirteen (13).
INFORMATION SUBMITTED BY USER
You agree that you will not upload or transmit any type of communication or content to any public area that infringes or violates any rights of any party. By submitting any communication or content, including any business information, ideas, concepts or inventions to Gearhead Communications by e-mail or any other manner, you agree that such submission is non-confidential for all purposes. By submitting any such information to a public area or via e-mail, you automatically grant, or warrant that the owner of such content or intellectual property has expressly granted to Gearhead Communications and its affiliates a royalty-free, perpetual, irrevocable, worldwide, non-exclusive license to use, reproduce, create derivative works from, modify, publish, edit, translate, distribute, perform and display the communication or content in any media or medium or any form, format or forum now known or hereafter developed. If you wish to keep any business information, ideas, concepts or inventions private or proprietary, do not submit them to the public areas or to Gearhead Communications by e-mail.
LINKS
Gearhead Communications may provide links to third party web sites. Gearhead Communications and its affiliates do not recommend and do not endorse the content on any third party web site and are not responsible for the content of linked third party sites, sites framed within the Web Site, third party sites provided as search results, or third party advertisements, and does not make any representations regarding their content or accuracy. Your use of third party web sites is at your own risk and subject to the terms and conditions of use for such sites.
COOKIES/LOG FILES
Cookies are files that contain information created by a web server that can be stored on a user's hard disk for use either during a particular session or for future use. Gearhead Communications uses cookies for maintaining user account information, to help administer the Web Site, to measure the use of the Web Site and to improve the content of the Web Site. Users may set their computers to refuse cookies. Most browsers are initially set to accept cookies.
The Web Site may also use cookies and/or log files to collect information such as date and time of use, users' IP address and links and pages viewed by users of the Web Site. Such information is gathered for the purposes of maintaining user account information and is not used to disseminate significant information about users over the Internet or to analyze any information that users have knowingly or unknowingly provided. Such information will be accessible only by Gearhead Communications and its internet Web Site service provider.
INDEMNITY
You agree to defend, indemnify and hold Gearhead Communications and its affiliates and their respective officers, members, employees, agents, licensors and suppliers harmless from and against any claims, actions or demands, liabilities and settlements, including, without limitation, reasonable legal and accounting fees resulting from or alleged to result from your violation of this Terms of Use and Privacy Policy.
GENERAL
Gearhead Communications, LLC is an Iowa limited liability company. Gearhead Communications makes no claims that the content provided in the Web Site is appropriate or may be downloaded outside of the United States. Access to the content in the Web Site may not be legal by certain persons or in certain countries. If you access the Web Site from outside the United States, you do so at your own risk and are responsible for compliance with the laws of your jurisdiction.
In the event all or a portion of the assets owned or controlled by Gearhead Communications or any parent, subsidiary or affiliated entity are sold, assigned, transferred or acquired by another company, information from or about Web Site users may be among the transferred assets.
JURISDICTION
You expressly agree that the exclusive jurisdiction for any dispute with Gearhead Communications, or in any way relating to your use of the Web Site, resides in the courts of the State of Iowa and you further agree and expressly consent to the exercise of personal jurisdiction in the courts of the State of Iowa in connection with any such dispute, including any claim involving Gearhead Communications or its affiliates, subsidiaries, employees, officers, members, telecommunication providers, licensors and suppliers. This Terms of Use and Privacy Policy is governed by the internal substantive laws of the State of Iowa without respect to its conflict of law principles. If any provision of this Terms of Use and Privacy Policy is found to be invalid by any court having competent jurisdiction, the invalidity of such provisions shall not affect the validity of the remaining provisions of this Terms of Use and Privacy Policy, which shall remain in full force and effect. No waiver of the Terms of Use and Privacy Policy shall be deemed a further or continuing waiver of such term or condition or any other term or condition.
COMPLETE AGREEMENT
This Terms of Use and Privacy Policy constitutes the entire agreement between you and Gearhead Communications with respect to the use of the Web Site and content.
Thank you for your cooperation. We hope you find the Web Site helpful and convenient. Questions or comments regarding the Web Site should be directed by electronic mail to patti [at] premierguitar.com or via U.S. Mail to Gearhead Communications, LLC, Three Research Center Marion, IA 52302.
Fishman Fluence introduces the Mick Thomson Signature Series pickup set, offering three distinct voices in both the bridge and neck pickups.
Mick Thomson is known for being one of the driving forces of Slipknot, one of the biggest metal bands in the world. Unafraid of new technology and forging new paths, Mick has been exploring innovative and groundbreaking gear throughout his entire career. Enter Fishman Fluence, with its ability to deliver the highest form of multiple voicings within the same pickup. Not only is Fluence technology able to deliver the greatest version of Mick's signature tones, but his new pickup set encapsulates everything that he’s been searching for throughout his career. The wide array of tones available from this set spans the entire range of aggressive lead and rhythm tones to the purest rock tones, plus the addition of exceptional single coil capability.
The first voice in the bridge pickup is Mick’s signature tight, active bridge humbucker tone, while Voice 2 delivers a refined hot and punchy passive humbucker sound. A glassy, crystal-clear single coil tone is the third voice giving the bridge pickup three distinct but musically complimentary voices.
The neck pickup features a Voice 1 that’s thick and fluid, and a Voice 2 that offers sweet “vintage plus” passive humbucker tone with added low mid punch. Like the bridge humbucker, the neck pickup incorporates a third voice that puts out vintage, but quiet, single-coil neck tone.
To achieve the voicings that Mick needed, Fishman employed a new custom hybrid magnet design.
"My pickups were tuned in a studio and then tested on the road and then tuned a little bit more. The end result being both musical and face-melting,” states Mick Thomson.
“Extra attention was given to the low mids to keep it big but tight. Voiced to cut through a mix but never be shrill. Just could not be happier with how they turned out."
The pickups are available as a 6-string set and come in a matte black nickel finish, personally chosen by Mick. Street price in the U.S. is $289.95 for the set.
For more information, please visit fishman.com.
Fishman Fluence Mick Thomson Signature Series Pickup Set - Black
Fluence Mick T PU Set, BlkAs the premier season of the show comes to a close, Richie Sambora sends it off with a fun, free-wheeling episode that looks at his high-drama fingerwork on “Only Lonely” from Bon Jovi’s second record, 1985’s 7800° Fahrenheit.
Richie joins Shifty subterranean-style, from his mother’s basement in New Jersey, where he’s equipped with a reverse-headstock Charvel, complete with a Floyd Rose system. It’s a busy time for Sambora: His first new single in 11 years, “I Pray,” dropped in late April, alongside a brand new, four-part Bon Jovi documentary.
For “Only Lonely,” Sambora recalls that he used just a 50-watt Marshall and a yellow Boss overdrive pedal to push it to the limit. Producer Lance Quinn captured the performance at the Warehouse in Philly in spring 1985, and Sambora hasn’t slowed at all since that day. Shifty takes a run at a few of Sambora’s blistering lead screeds before Richie takes the reins and brings it home. They don’t leave it at “Only Lonely”; as an added bonus, they run through Sambora’s famous licks from “Bad Medicine,” too.
Between solo runs, Richie talks about his current rig (no modelers for him, just old-school tube-amp goodness) and addresses the rumors: Will he rejoin Bon Jovi after 11 years gone?
See you on the next season of Shred With Shifty!
Credits
Producer: Jason Shadrick
Executive Producers: Brady Sadler and Jake Brennan for Double Elvis
Engineering Support by Matt Tahaney and Matt Beaudion
Video Editors: Dan Destefano and Addison Sauvan
Special thanks to Chris Peterson, Greg Nacron, and the entire Volume.com crew.
From walls of 4x12s to modern modeling tech, heavy tones have come a long way since the age of Iommi.
No style of amp is so definitively a part of a musical genre and culture as high-gain amplifiers. In the modern amp market, there’s a wide range of amps that can achieve a heavy tone, from hulking stacks to lunchbox heads, but their objective unites them. High-gain amps are a cornerstone of electric guitar, and their aggression is heard in every style of music under the sun.
The debate about where high-gain started rages on, but there’s a strong consensus that Tony Iommi and Black Sabbath had more than a little to do with it.
“The first record that really had an impact on me, with regards to that aspect of tone, was Sabbath Bloody Sabbath,” says Sweetwater hard content creator and former Grim Reaper guitarist Nick Bowcott. “It was a brutal sounding record. Iommi was so ahead of his game.”
Keep in mind that there were no high-gain amps when Iommi got his start. Instead, Bowcott explains, “He was doing his thing with a modded Dallas Rangemaster (treble booster) and running into a (Laney) Supergroup while often tuning down to C#. That’s how far ahead of the curve he was.”
Iommi’s tone and Sabbath’s influence were so dramatic that guitarists worldwide adopted it while honing it into a faster, more streamlined style. It was the beginning of heavy metal, and even the world’s biggest rockers claim it’s still unmatched. “Rob Zombie said, ‘The reason there aren't any more good heavy metal riffs today is because Iommi wrote them all,’” Bowcott adds. “It reminds you of how brilliant those songs are.”
The Marshall JCM800
Introduced in 1981, the Marshall JCM800 series kicked open the doors to the high-gain amp market.
Like Iommi’s Laneys, the tube amplifiers of the time didn’t offer the quick response, tight low end, and increased distortion those players required. The closest thing on the market was Marshall’s 1959 Super Lead, aka the plexi. While definitely distorted, these amps only gave up their saturated tones when played much too loud for most performances.
Guitarists begged for an amp that gave them the tones of Van Halen, Randy Rhoads, and the New Wave of British Heavy Metal, while still being something they could use. Over in England, Jim Marshall responded. In 1981, he released one of the most iconic electric guitar amplifiers of all time, the master-volume-equipped Marshall JCM800 2203.
“To me, the (JCM)800 is a foundational piece with regard to high gain. They owned the ’80s.” —Nick Bowcott
For the first time, the famous Marshall kerrang could be had at gig-appropriate volumes. The amp was a hit, and the JCM800 quickly laid the foundation for what would come. “To me, the 800 is a foundational piece with regard to high gain,” remarks Bowcott. “They owned the ’80s.”
The Mesa Engineering Mark Series
The first Boogies were created when Mesa’s Randall Smith “boosted the daylights out of a little (Fender) Princeton.”
However, Marshall wasn’t the only one pushing overdrive into the modern era. Randall Smith and Mesa Engineering’s first amps—hot-rodded Fender-style combos which Smith called “Boogies”—also marked the transition between vintage and modern with a high-gain voice of their own.
“Early on, I boosted the daylights out of a little [Fender] Princeton,” Smith notes. “It was 80 times the gain of the normal amp! It had this amazing crunch. Power chords and single-note riffs had that vocal, singing thing that made Carlos (Santana) so famous. You could go from the biggest, most amazing Fender clean sound to this level of distortion that nobody had ever heard before.”
Those first Boogies launched one of the most respected names in guitar amplification. Now known as the Mark I, Smith’s amps were soon a favorite of plenty of well-known guitarists.
The Boogie has had multiple variations and feature sets over the years. Each one was given a numeral to differentiate its designs, and the Mark II, with its tighter, more aggressive tone, is where the heavy metal world took notice.
One band, in particular, would launch themselves and the amps to incredible heights after stopping by Smith’s shop in the 1980s.
“Metallica, I remember them coming up,” laughs Smith. “They were young guys. They came up to the factory and grabbed some IIC+s. That was it. That was what they were looking for sonically. They said, ‘Okay, this is what we’ve been hearing in our heads.’”
Smith never considered his Boogie to be a heavy metal guitar amplifier,, but the enormous Mark IIC+-fueled success of Ride the Lightning and Master of Puppets changed that forever.The Amp Modding Craze
Together, the JCM800 and Mesa’s Mark series kicked off a new era in guitar amplification. But, as is always the case, players still wanted more. Many players even modified their amps in search of new, heavier tones.
Before long, the amp-modding community had grown into its own industry with famed amp techs such as José Arredondo, Lee Jackson, and César Díaz squeezing the most tone and gain from the circuits as possible. Those modded amps were the go-to high-gain rigs for everyone from Steve Vai and Paul Gilbert to Alice In Chains’ Jerry Cantrell.
The modification game became so popular, and the modders so well respected, that many began producing their own amp designs. Brands like Bogner, Friedman, and Rivera are just a few that owe a lot of their early success to the mod craze. Even Mike Soldano got in on it.
“I did Marshall mods just like all those other guys,” he admits. “As I started gaining notoriety around L.A., people would bring me their Marshalls and say, ‘Hey, can you make my Marshall sound like this?’”
The Soldano SLO-100
Mike Soldano says he built his first high-gain amp for himself, but soon learned that other players wanted one too.
Soldano’s notoriety was well-earned. As the father of the Soldano Super Lead Overdrive (SLO) 100, many credit him for starting the modern high-end, high-gain tube-amp market.
As a young guitarist, he had faced the same gain-to-volume dilemma that plagued all aspiring rockers of the time. An early adopter of Mesa’s Boogie amps, he thought he had solved the issue, but while the Boogie had a high level of gain, it wasn’t a “high-gain amp.” Unsatisfied with the Mesa and wanting to avoid wrestling with a non-master volume Marshall, he built his own.
“I already knew what I wanted my guitar to sound like,” he says. “I heard it on records, but I knew they were getting that with post-effects and using plexis and big, giant rooms with the volume cranked to 11. I was determined to create an amp that would give me that sound at any volume, at any time, in any place.
“I got a bunch of old radio manuals from the ’40s and ’50s, and every night when I’d come home from work, I’d sit in my room and tinker around, build circuits, and try different things out.”
Soldano was excited about his new creation, but it was other guitarists’ reactions to the amp that told him he was onto something special.
“In order to crank the thing up, I needed to take it down to my friend’s rehearsal space. Every time I did, everybody in the place would start flocking to the room, and they’d be like, ‘What are you guys playing in there? I want to try it!’ I realized then that that sound wasn’t just the sound I wanted. There were other people who wanted it, too.”
“I already knew what I wanted my guitar to sound like…. I was determined to create an amp that would give me that sound at any volume, at any time, in any place.” —Mike Soldano
It took a while, but eventually, Soldano’s new amp started turning the heads of all the right people. “When I first got to L.A., I met Howard Leese,” he remembers. “The next morning, I shot out to meet him at Rumbo Recorders and took my amp with me. He plugs it in, plays about two notes, and he’s like, ‘This is awesome, I'm buying this.’ Then, this guy Tony managed to get an amp in front of Steve Lukather, and Steve went nuts for the thing. Then, I was checking my message machine one day, and there were calls from Lou Reed, from Vivian Campbell, and from Michael Landau. They all were asking about that SLO!”
If the JCM800 started high-gain amps, the SLO-100 was the first tube amp designed for the job. It completely changed the amp industry, and, like Leo Fender’s Telecaster, it remains an industry standard that's largely unchanged today.
The German High-Gain Explosion
Inspired by the SLO’s searing gain, sustain, and versatile volume control, manufacturers began cranking up their amps’ performance worldwide. Builders were finally delivering all the gain and control players wanted.
German makers like ENGL, Diezel, Hughes & Kettner, and L.A.-based Bogner made names for themselves with legendary high-gain heads like their Savage, VH4, TRIAMP, and Uberschall. For European metal guitarists, this was the dawn of a new era.
“The ENGL Savage was my main live amplifier for maybe seven years,” says Haunted guitarist, YouTube personality, and Solar Guitars owner Ola Englund. “Not too many other brands at that time could give you this insanely tight, modern metal sound without using a boost. You just hook up your guitar, and it sounds incredible.”The Mesa Rectifier Series
“The Dual Rectifier just completely proliferated all of the grunge years,” says Mike Soldano.
Between the Marshalls, Mesas, a flood of modded amps, and the amps coming out of Germany, the late ’80s and 1990s had a lot of high-gain to offer. Still, a new amp from a familiar face defined the next couple of decades.
“The (Mesa) Rectifier was the one in the ’90s,” Bowcott says, point blank. “The ’80s were the JCM800, and the ’90s were the Rectifiers.”
“The Dual Rectifier just completely proliferated all of the grunge years,” echoes Soldano. “There wasn’t a band out there that wasn’t playing a Rectifier.”
“We had no expectation that the Rectifiers would end up being so popular.” —Randall Smith
Today, Randall Smith’s Mesa Rectifiers are definitive high-gain amps. Everyone from Metallica and Korn to Soundgarden and Cannibal Corpse uses them to create the heaviest tones in rock history. So it’s surprising they were designed by someone more Santana than Sepultura. According to Smith, he was as surprised as anyone.
“We had no expectation that the Rectifiers would end up being so popular,” he said. “It was to the point that we had to fight that image. Players are like, ‘Mesa, those are the high-gain metal guys. I’m not interested in that.’ But it was only one product! (Laughs)”
The Peavey 5150 And Beyond
The Peavey 6505 and EVH 5150 are both descendants of the original Peavey 5150 designed by Eddie Van Halen and amp designer James Brown.
While Mesa’s Rectifiers had no equal in terms of popularity, one amp did give it a run for its money in impact and aggression: the Peavey 5150. Created by amp designer James Brown and Eddie Van Halen—who had been playing SLO-100s—the 5150 quickly transcended classic-rock heroics and laid the foundation for a new breed of extreme high-gain tone.
Machine Head’s Burn My Eyes was arguably the first release to put the amp on the metal map, while producer/engineer Andy Sneap’s legendary use on countless records cemented it in place. Bands like In Flames, Killswitch Engage, and Arch Enemy also used the amps to great effect.
“The 5150 was probably the most aggressive amplifier out there,” says Englund. “I remember it was either the 5150 or the Rectifier, (those were) the ’90s choices right there. If you played in a serious metal band, it’s one of these.”
Like the Rectifier, the 5150 has seen multiple tweaks and changes since its inception. The most notable came when Eddie took his 5150 trademark to Fender to launch EVH and the 5150 III amp line. Not wanting to drop one of the most popular high-gain amps ever, Peavey gave theirs a facelift and renamed it the 6505. The world lost a hero when Eddie passed away in 2020, but he left us with two amp lines that will go down in high-gain history.
Solid-State High Gain and Dimebag Darrell
The ’90s and 2000s were all about high-gain tube heads. But a handful of solid-state and hybrid amps also drove some of the era’s most intense music. The most famous of these amps was the Marshall Valvestate 8100. While many players denounced its cold, toothy voice, Bowcott says others built a career around it.
“Marshall came out with Valvestate in the early ’90s, and people like (Prong guitarist and singer) Tommy Victor adopted that amp. It was his sound on ‘Snap Your Fingers, Snap Your Neck.’”
Victor wasn’t the only one using the 8100; it’s also the sound of Static-X's Wisconsin Death Trip and, reportedly, shaped the sound of early Meshuggah. No other 8100 player, however, is credited with having the influence and savagery of Death’s Chuck Schuldiner. Plugging into his 8100, he’s widely regarded as creating death metal.
Of course, there was one other high-gain hero who more than deserves a mention when it comes to ’90s solid-state. Pantera’s Dimebag Darrell and his Randall RG100 and Century 200 amps sounded so heavy, singular, and next-level that few have even tried to cop his sound.
“Dimebag had the most distinctive metal tone, and I don’t think anyone has managed to break that,” comments Englund. “It was his and no one else’s. He would just overdrive it to hell and back and add all these doublers and flight flangers and stuff. That was a solid-state tone right there.”
The Rise of Digital Modeling
The legacy of the Line 6 Pod lives on, elevated to stages everywhere, in the Helix.
How guitarists get their high-gain tones has changed drastically over the years, and that’s never been more true than in the last couple of decades. Instead of walls of amps and 4x12 cabinets, these days, we get remarkably similar sounds from compact digital rack and floor processors. Evolving from the original Line 6 POD, digital modeling now defines this era of guitar.
Initially relegated to practice tools for home use, starting in the late 2000s, bands like Periphery and Animals As Leaders have increasingly embraced modeling units like the Fractal AXE-FX, the Kemper Profiler, the Neural QuadCortex, and Line 6’s flagship Helix. The bands’ pristine tones, impressive musicianship, and pummeling riffs opened the floodgates of high-gain for a new generation. They’ve established modeling as a legitimate tone tool for professionals and even won over old-school rockers like Bowcott. “There’s some amazing stuff out there,” he says. “You can argue that there’s never been a better time to be a guitar player, apart from maybe decision paralysis.”
The impact of digital amp modeling can’t be overstated. Whether a physical unit or the countless inexpensive software amp sims, they all sound realistic, respond remarkably well, and open a world of routing and control options. They’re so prevalent that many younger guitarists have never even owned a tube amp.
Tube Amps and Impulse Responses
The Revv G20 is one of a growing number of modern lunchbox-style heads with IR capabilities combining portability and high-gain tone.
So, will digital modeling actually kill high-gain amplifiers? The consensus is probably not, but tube amps do have to evolve. The answer may lie in impulse responses (IRs).
Impulse responses are digital snapshots of real speaker cabinets and microphones loaded onto a modeler or computer. They let you hear a well-recorded cab without plugging into an actual speaker.
More and more brands are adding IR capabilities to smaller, lunchbox-style tube amps. Heads like the Revv G20 and ENGL Ironball Special Edition are pioneering this approach and striking the perfect balance of tradition and convenience. Randall Smith is a fan, and Soldano even joined the party with his Astro-20.
“I think it’s a great evolutionary step. That’s ultimate if you ask me,” says Smith. “The important thing is that you have your tube amp. You’re not sacrificing that in order to get the virtues of digital and modeling.”
Soldano echoes Smith’s enthusiasm, saying, “I think for home recording, it’s going to completely take over. It’s a perfect recording amp. You can set this thing on your desktop. You don’t even have to plug in a speaker cabinet. You can run it straight into your digital mixing world, and you can bring up these different IRs. You can do amazing stuff without even a single dB of sound in the room.”
Long Live High-Gain Tube Amps
Hybrid tube designs are helping ensure a bright future for high-gain tube amps. Still, Soldano, Smith, Englund, and Bowcott agree that tube rigs weren’t going anywhere anyway.
“On any Friday night, in any bar in any town, you’re still going to see some guy up there or some gal with a 50-watt half stack rocking it out,” says Soldano.
“The metal community, they still want moving air,” adds Englund. “That's something that can’t be modeled. You can’t explain it, but when you stand in front of an amplifier, it’s so easy to justify.”
Bowcott also agrees but says the experience extends beyond plugging in. “I remember, back in the day, going to see Diamond Head and Judas Priest. They had that huge wall (of amps) that, before they played a note, you’re like, ‘This is going to be cool!’ There was something visually visceral.”
High-gain tone has taken many forms over the decades. From Iommi’s influence to the tech-death insanity of bands like Archspire, it’s forever part of the electric guitar lexicon. As it evolves, so do the tools we use to achieve it.
Nothing will replace the physical interaction of a cranked tube head. At the same time, nothing today matches the convenience and possibilities of digital modeling. Then again, maybe the hybrid approach is the future. Whatever's next for our favorite heavy sounds, there are still plenty of legendary builders, technological innovators, and boundary-pushing players working hard to ensure high-gain guitar tone is here to stay.