Like King Ghidorah, these rock fretmasters prove three heads are better than one.
After a five-year break in studio releases, Train came roaring back this year with AM Gold and a tour with dates stretching into 2023 that’s delivering their new songs and a sampling of the group’s 28 charting singles from their nearly 30-year history. PG’s John Bohlinger stopped in on the band’s two guitar players, Jerry Becker and Taylor Locke, and bassist Hector Maldonado, before their June 21 show at Nashville’s Ascend Amphitheater. They displayed the big bevy of instruments they use to recreate the Train sound live.
PS: Special thanks to techs Wayne Davis and Stephen Ferrera-Grand for help running down the rigs.
Brought to you by D’Addario Nexxus 360 Tuner.
Yellow Fever
Taylor Locke’s No. 1 is this all-stock, scarred Gibson Custom Shop Les Paul Special in TV yellow. For the record, Locke uses Shubb and Kyser capos, strings his axes with Dunlops, and uses the latter company’s picks and slides.
Hum-Doozie
When the song calls for a guitar with humbuckers, Locke goes with his all-stock Gibson Custom Shop R7 Les Paul Goldtop. It’s essentially a re-do of a 1957 Paul right down to the chunky C-profile neck and Indian rosewood fretboard.
Double Trouble
Some of Train’s songs require both electric and acoustic tones, and for those Taylor employs an Epiphone Casino, which tech Stephen Ferrera-Grand has outfitted with Fishman’s PowerBridge pickup system. The jack on the Casino is stereo, which enables splitting the stock electric pickups and a piezo pickup to two separate wireless packs, mounted side-by-side on Taylor’s guitar strap. The piezo signal hits a Sound Sculpture Volcano expression pedal volume controller that routes to an on/off switch on his Line 6 HX Effects stomper. The piezo sound is sent to front-of-house and monitors via a Fishman Aura Spectrum DI preamp.
Fab Filtration Across the Nation
When it’s time to go Filter’Tron, Locke straps on this tuxedo’d G6128T Vintage Select ’89 Duo Jet with a trusty Bigsby. In case the colors aren’t shining though in the photo, it’s an impressive black with metallic green sparkle, and Locke keeps it tuned a half-step down and strung with Dunlop .011s
Old Frontier
Locke aims for a couple of classic acoustic guitar tones, and for vintage vibe he reaches for this 1964 Epiphone Frontier. It’s from the original ’58 to ’70 run, with a Sitka spruce top and maple back and sides. These days, the model has been restored to the catalog courtesy of Gibson’s acoustic builders in Bozeman, Montana.
Clydesdale Tone
The workhorse sound of the Gibson J-45 resonates in the Train catalog, and this is one of many the band keeps in their 6-string arsenal.
Reso-Phonics
When the language of roots guitar needs to be spoken, Locke grabs his Gretsch resonator—part of the company’s Roots Collection of guitars. This one uses Gretsch’s patented Ampli-Sonic biscuit cone.
Playing the Dozens
When it’s time to wrangle acoustic jangle, this all-stock 1971 Ovation Glen Campbell 12-string gets to shine and shimmer. Unlike modern 6-string Campbell signature Ovations, this guitar lacks a cutaway. It has a Sitka spruce top, a walnut bridge, and an ebony fretboard—and sounds killer.
It’s Pronounced Oo-koo-lay-lay in Hawaiian
The hit “Hey, Soul Sister,” which reached No. 3 on Billboard’s pop chart in 2009, is guaranteed set-list material for every show. So, of course, Locke always has a requisite ukulele onstage. Here’s a look at the pair of Godin ukes in his rack.
Lean, No Cheese, 35 Watts
Locke uses a Top Hat King Royal 2x12 combo kept slightly off stage but loud enough to be audible. The 35-watter has three 12AX7s and four EL84 power tubes, and a GZ34 governing the rectifier. There’s a fat-off-bright switch, too. How does he run it? See the next photo.
All Set!
Here are his settings for the Top Hat. Note the master volume riding at 1 o’clock and his preference for the hi-input jack.
Is That a Banana, or….
Locke isn’t monkeying around: If his Top Hat goes down, he’s got a Vox C4 tucked aside as a spare. And a banana—maybe to snack on while Ferrera-Grand powers the amp up?
The Great Switcheroo
Locke’s electric guitar signal hits a Shure Axient Digital wireless and zooms into a Radial SW4 switcher. Tech Stephen Ferrera-Grand does the wireless switching on the Radial unit, in his guitar rack.
Above the SW4, you’ll see, peeking out, the acoustic boss: a Countryman DI. The Godin ukuleles follow the same signal flow as the acoustics, but along a different path into a separate Countryman DI.
Treading the Treadles
From the rack, the signal is sent out to a Pedaltrain ’board, outfitted with a Best-Tronics patchbay. The board contains a Dunlop DVP1XL volume pedal to a Line 6 HX. A second DVP1XL controls certain effects parameters, such as delay repeats and Leslie speed. The signal is then sent into a Boss NS-2 noise suppressor and on to the Top Hat amp.
Each speaker gets its own microphone: a Shure SM57 and an Audio-Technica AT4040.
For the majority of the set, Taylor keeps his HX set up with the following effects models: a Tone Bender fuzz (for leads and solos), a Klon Centaur (primary overdrive sound, almost always on), an MXR Timmy OD (neutral volume boost), EHX Deluxe Memory Man (modulated slap delay), Boss DM-2 Delay (long delay), and a Fender Vibratone (rotary). Taylor scrolls to other pedalboard scenes for song-specific effects, using tremolo for “Meet Virginia,” a Small Stone phaser for “AM Gold,” and so on.
Butterscotch Bliss
Another entry from the realm of the classics: Jerry Becker’s 2011 all-stock Fender American Vintage ’52 Telecaster has an ash body, a large U-profile neck, and, of course, a maple fretboard. It is strung with Dunlop DEN1046 Electric Nickel Performance+ string sets, running .010–.046. PS: Becker uses Levy’s straps and wireless pouches, Dunlop custom graphic signature picks, and Kyser Quick-Change capos.
Red Horse
This Gibson SG Classic from 2010 is stock and strung with Dunlop Performance+ .010–.046 sets—as are all his electrics. It has P-90s, a rosewood fretboard, and pearloid dot inlays up the neck.
Guitar of the Beast
This second-generation Gibson Les Paul Special reflects the body style that led Les Paul himself to cut ties with Gibson in the early 1960s. Nonetheless, with their two P-90s and lighter slab bodies, these are killer guitars. The double-horn cutaways make this 1973 a rare beast. It’s stock.
All Stock and Ready To Rock
Here’s Becker’s 1973 Gibson Les Paul Custom, left as it came from the factory. As you may recall, this model comes with “banjo”-style fret wire, to earn their reputation as—as Gibson put it on the model’s introduction in 1954—fretless wonders.
Modern Classic
This Gibson ES-339 was built in the first year the model was issued: 2007. The company introduced this guitar as a smaller—Les Paul sized—take on the ES-335, with a laminated maple-poplar-maple body, a maple center block, and spruce contour braces.
One More 45
Here’s yet another of Train’s Gibson J-45s. This one is a 2013 Custom Shop model in a wine red finish, and it is strung with Elixir 11050 80/20 Bronze Polyweb lights, gauged .012 to .053.
Nashville Tuning
Becker’s 1966 Gibson B-25 is set up in Nashville, or high strung, tuning. In this tuning, the wound E, A, D, and G strings are replaced with lighter-gauge strings tuned an octave higher than usual. In the old days, this had to be done by raiding 12-string sets, but some modern string makers produce Nashville tuning sets. So, Becker uses D’Addario EJ38H Phosphor Bronze .010–.027s.
Canadian Nylon
This 2017 Godin Multiac Nylon Duet Ambiance Natural HG has Fishman electronics that allows the internal blending of four microphone settings. It also sports a slim nut width (1.9"), a Richlite fretboard, and a chambered mahogany body. The strings: D’Addario EJ31 Pro-Arté Rectified Nylon Hard Tensions.
In the Pedal Pond
Becker uses a Fractal Audio Systems FX8 MkII combined with a Mission Engineering SP-1 Expression Pedal. There’s a Lehle D.Loop SGoS Loop Switcher, a Boss TU-3 Tuner, a Radial JR-2 Remote, and a Lehle P-Split Passive Splitter. It’s all powered by a Voodoo Labs Pedal Power 2 Plus.
But Wait, There’s More
Guitar tech Wayne Davis mapped out Becker’s signal flow for us. The electric guitars hit a Shure Axient Digital Wireless receiver and flow into a Radial JX62. There, the 6-strings can be directed into the Lehle D.Loop in and then out via a loop A send to the Fractal FX8. The loop A return then reroutes through a D.Loop out to the Radial again. Then there are amp options: a Matchless DC-30 or a Leslie combo preamp and 145 rotary speaker cabinet. Acoustic guitar arrives via the wireless and hits the PA via the JX62 DI out.
Green Sound Machine
This envy-shaded DC-30 is Becker’s big gun. It was the company’s first design and gets huff from four EL84s, with two preamp sections: one powered by two 12AX7s and the other by a single EF86. That’s a lot of tonal versatility.
The Understudy
This Vox AC30 acts as Becker’s back up.
Coming Up Roses
Bassist Hector Maldonado’s long search for an early ’60s P bass landed him this 1960 Fender Precision days before Train’s current summer tour. The gem was professionally refinished by Joe Riggio of Riggio Custom Guitars at some point, but other than that it’s as Leo intended over 60 years ago. Riggio helped connect Maldonado to the seller so he could acquire his dream bass.
No. 2
With the arrival of his new old P, this off-the-rack Fender American Vintage ’62 P bass reissue got demoted to the No. 2 slot. But Maldonado says it plays better than some of his vintage instruments, and this 4-string has been around the world a few times with Train. Both Fenders take D’Addario roundwounds (.045–.100).
Sir Paul’s Highball
If you’ve spent time with any of the last three Train albums, you’ve heard this limited-run Hofner Gold Label Violin Berlin model. It is made of German Nussbaum wood and has the company’s 511B staple pickups in a normal-spacing configuration. Hofner’s Gold Label instruments are highly limited editions.
Get Back!
For the ultimate Beatles’ vibe, Maldonado uses this Hofner B-Bass HI-Series Violin model. It provides the desired “pluck” sound of 1964. Both of his stage Hofners take D’Addario XL Chromes, flatwound (.045–.100).
Spanish Flair
“Cleopatra” off AM Gold has a flamenco guitar part. Maldonado is classically trained, so he was the obvious choice to handle it, plus Becker and Locke are already busy with their own guitar chores on the song. Hector’s setup on his Yamaha CG172SF is creative. He uses a blend of strings from his Fender Bass VI and nylon guitar strings to hold down the low end and shred fingerstyle.
Racked and Ready
A Mesa/Boogie Subway D-800+ powers his basses, while an Avalon U5 Class A Active Instrument DI give a clear signal to front-of-house. And like his compatriots, he’s running a Shure AD4D rackmount wireless system.
More on the Floor
Maldonado has more pedals on the floor than his fellow Trainmen. His stomp station consists of a trio of mini MXRs—a Carbon Copy, Phase 95, and Vintage Bass Octave—plus an Electro-Harmonix Holy Grail Nano reverb, a Tech 21 SansAmp Bass Driver DI, a DigiTech Bass Driver OD, an Origin Effects Cali76 compressor, and a Mesa/Boogie Five-Band Graphic EQ. A Dunlop Volume (X) DVP3 and a Boss TU-3s mini Chromatic Tuner keeps his instruments reined.
So, you want to chase the riches and glories of being a mid-level guitar YouTuber. Rhett and Zach have some reality checks.
This outing of Dipped In Tone kicks off with an exciting update from Zach Broyles’ camp: He’s opening a brick-and-mortar guitar shop in Nashville, called High Voltage Guitars. Opening on October 8, the store will carry gear from Two-Rock, Divided By 13, Dr. Z, Castedosa, Fano, Novo, and of course Mythos Pedals. Zach hints that there might be some handwired JHS pedals from Josh Scott himself, too, and Rhett reveals that he plans to consign some of his guitars at the shop.
The business side of Zach’s new venture brings them to a key piece of today’s episode: Rhett and Zach aren’t running charities. They do what they do to make money; guitars, gear, podcasting, and content creation are their literal jobs. And they’re not as glamorous and breezy as most armchair commentators might guess.
Want to do what Rhett and Zach do? Welcome to the club. The guitar-influencer field is what one might call “oversaturated” at the moment, and it’s difficult to break out—but not impossible. As our hosts explain, it requires putting in 60-hour work weeks, a diverse skillset, a knack for catching people’s attention, and a certain level of genuineness. Rhett knows this path well, and he has hard-earned advice for staying true to oneself while building a following in the gear world.
Tune in to learn why Rhett thinks Fretboard Summit, a three-day guitar festival organized by Fretboard Journal, blows NAMM out of the water and builds legitimate connections between guitarists, and catch the duo dipping a Dick Dale-inspired, all-Fender rig.
Get 10% off your order at stewmac.com/dippedintone
Plenty of excellent musicians work day jobs to put food on the family table. So where do they go to meet their music community?
Being a full-time musician is a dream that rarely comes to pass. I’ve written about music-related jobs that keep you close to the action, and how more and more musicians are working in the music-gear industry, but that’s not for everyone. Casual players and weekend warriors love music as much as the hardcore guitarists who are bent on playing full time, but they may have obligations that require more consistent employment.
I know plenty of excellent musicians who work day jobs not to support their musical dreams, but to put food on the family table. They pay mortgages, put children through school, provide services, and contribute to their community. Music may not be their vocation, but it’s never far from their minds. So where do they go to meet their music community?
A good friend of mine has studied music extensively in L.A. and New York. He’s been mentored by the pros, and he takes his playing very seriously. Like many, he always had day jobs, often in educational situations. While pro gigs were sometimes disappointing, he found that he really enjoyed working with kids and eventually studied and achieved certification as an educator. To remain in touch with his love of music, he plays evenings and weekends with as many as three groups, including a jazz trio and a country band. Not actually worrying about having a music gig that could support him in totality has changed the way he views playing out and recording. He doesn’t have to take gigs that put him in stressful situations; he can pick and choose. He’s not fretting over “making it.” In some way, he’s actually doing what we all want, to play for the music plain and simple.
Another guy I know has played in bands since his teens. He’s toured regionally and made a few records. When the time came to raise a family, he took a corporate job that is as about as far away from the music business as you can get. But it has allowed him to remain active as a player, and he regularly releases albums he records in his home studio. His longstanding presence in the music scene keeps him in touch with some famous musicians who guest on his recordings. He’s all about music head to toe, and when he retires, I’m certain he’ll keep on playing.
“Seek out music people regularly. They’re hiding in plain sight: at work, at the park, in the grocery store. They sell you insurance, they clean your teeth.”
I could go on, and I’m sure you know people in similar situations. Maybe this even describes you. So where do we all find our musical compadres? For me, and the people I’ve mentioned, our history playing in bands and gigging while young has kept us in touch with others of the same ilk, or with those who are full-time musicians. But many come to music later in life as well. How do they find community?
Somehow, we manage to find our tribe. It could be at work or a coffee shop. Some clubs still have an open mic night that isn’t trying to be a conveyor belt to commercial success. Guitarists always go up to the stage between changes to talk shop, which can lead to more connections. I like the idea of the old-school music store. Local guitar shops and music stores are great places to meet other musicians. Many have bulletin boards where you can post or find ads looking for bandmates. When I see someone wearing a band T-shirt, I usually ask if they’re a musician. Those conversations often lead to more connections down the line. Remember, building a network of musicians often requires persistence and putting yourself out there. Don’t be afraid to initiate conversations and express your interest in collaborating with others.
Of course, I’m lucky to have worked in the music sphere since I was a teen. My path led to using my knowledge of music and guitars to involve myself in so many adventures that I can hardly count them. Still, it’s the love of music at the root of everything I do, and it’s the people that make that possible. So whether you’re a pro or a beginner, seek out music people regularly. They’re hiding in plain sight: at work, at the park, in the grocery store. They sell you insurance, they clean your teeth. Maybe they’re your kid’s teacher. Musicians are everywhere, and that’s a good thing for all of us.
An amp-in-the-box pedal designed to deliver tones reminiscent of 1950s Fender Tweed amps.
Designed as an all-in-one DI amp-in-a-box solution, the ZAMP eliminates the need to lug around a traditional amplifier. You’ll get the sounds of rock legends – everything from sweet cleans to exploding overdrive – for the same cost as a set of tubes.
The ZAMP’s versatility makes it an ideal tool for a variety of uses…
- As your main amp: Plug directly into a PA or DAW for full-bodied sound with Jensen speaker emulation.
- In front of your existing amp: Use it as an overdrive/distortion pedal to impart tweed grit and grind.
- Straight into your recording setup: Achieve studio-quality sound with ease—no need to mic an amp.
- 12dB clean boost: Enhance your tone with a powerful clean boost.
- Versatile instrument compatibility: Works beautifully with harmonica, violin, mandolin, keyboards, and even vocals.
- Tube preamp for recording: Use it as an insert or on your bus for added warmth.
- Clean DI box functionality: Can be used as a reliable direct input box for live or recording applications.
See the ZAMP demo video here: https://www.youtube.com/watch?v=xJp0jE6zzS8
Key ZAMP features include:
- True analog circuitry: Faithfully emulates two 12AX7 preamp tubes, one 12AX7 driver tube, and two 6V6 output tubes.
- Simple gain and output controls make it easy to dial in the perfect tone.
- At home, on stage, or in the studio, the ZAMP delivers cranked tube amp tones at any volume.
- No need to mic your cab: Just plug in and play into a PA or your DAW.
- Operates on a standard external 9-volt power supply or up to 40 hours with a single 9-volt battery.
The ZAMP pedal is available for a street price of $199 USD and can be purchased at zashabuti.com.
Mooer's Ocean Machine II is designed to bring superior delay and reverb algorithms, nine distinct delay types, nine hi-fidelity reverb types, tap tempo functionality, a new and improved looper, customizable effect chains, MIDI connectivity, expression pedal support, and durable construction.
Similarly to the original, the Ocean Machine II offers two independent delay modules, each with nine different delay types of up to two seconds, including household names such as digital, tape, and echo delays, as well as more abstract options, such as galaxy, crystal, and rainbow. A high-fidelity reverb module complements these delays with nine reverb types, as well as a shimmer effect. Each delay and reverb effect can also be ‘frozen,’ creating static ambient drones, an effect that sounds particularly impressive considering the pedal’s DSP upgrades.
While the original Ocean Machine’s looping capabilities provided just 44 seconds of loop storage, the new addition features an impressive 120 seconds. To experiment with this feature, along with OceanMachine II’s other sonic capabilities, users can use an intuitive LCD screen along with 12 knobs (four for each delay and reverb module) to easily adjust parameters within the device’s ‘Play Mode.’ Three footswitches are also provided to facilitate independent effect toggling, tap tempo control, looper interfacing, and a preset selector.
Once the guitarist has crafted an interesting effect chain, they can save their work as a preset and enter ‘Patch Mode,’ in which they can toggle between saved settings with each of the three footswitches. In total, the Ocean Machine II provides eight preset storage banks, each of which supports up to threepresets, resulting in a total of 24 save slots.
The pedal’s versatility is further enhanced by its programmable parallel and serial effect chain hybrid, a signature element of Devin Townsend’s tone creation. This feature allows users to customize the order of effects, providing endless creative possibilities. Further programming options can be accessed through the LED screen, which impressively includes synchronizable MIDI connectivity, a feature that was absent in the original Ocean Machine.
In addition to MIDI, the pedal supports various external control systems, including expression pedal input through a TRS cable. Furthermore, the pedal is compatible with MOOER's F4 wireless footswitch, allowing for extended capabilities for mapping presets and other features. A USB-C port is also available for firmware updates, ensuring that the pedal remains up-to-date with the latest features and improvements.
Considering the experimental nature of Devin Townsend’s performances, MOOER has also gone above and beyond to facilitate the seamless integration of Ocean Machine II into any audio setup. The device features full stereo inputs and outputs, as well as adjustable global EQ settings, letting users tailor their sound to suit different environments. Guitarists can also customize their effect chains to be used with true bypass or DSP (buffered) bypass, depending on their preferences and specific use cases.
Overall, Ocean Machine II brings higher-quality delay and reverb algorithms, augmented looping support, and various updated connections to Devin Townsend’s original device. As per MOOER’s typical standard, the pedal is engineered to withstand the rigors of touring and frequent use, allowing guitars to bring their special creations and atmospheric drones to the stage.
Key Features
- Improved DSP algorithms for superior delay and reverb quality
- Nine distinct delay types that support up to 2 seconds of delay time: digital, analog, tape, echo,liquid, rainbow, crystal, low-bit, and fuzzy delays
- Nine hi-fidelity reverb types: room, hall, plate, distorted reverb, flanger reverb, filter reverb,reverse, spring, and modulated reverb
- Freeze feedback feature, supported for both delay and reverb effects
- Tap tempo footswitch functionality
- New and improved looper supporting up to 120 seconds of recording time, along withoverdubbing capabilities, half-speed, and reverse effects.
- Customizable order of effects in parallel or series chains
- Flexible bypass options supporting both true bypass and DSP bypass
- Large LCD screen, controllable through twelve easy-to-use physical knobs for real-time parameter adjustments.
- Adjustable Global EQ Settings
- Full stereo inputs and outputs
- Synchronizable and mappable MIDI In and Thru support
- USB-C port for firmware updates
- External expression pedal support via TRS cable
- Support for the MOOER F4 wireless footswitch (sold separately)
- Designed for durability and reliability in both studio and live environments.
The Ocean Machine will be available from official MOOER dealers and distributors worldwide on September 10, 2024.
For more information, please visit mooeraudio.com.