Like King Ghidorah, these rock fretmasters prove three heads are better than one.
After a five-year break in studio releases, Train came roaring back this year with AM Gold and a tour with dates stretching into 2023 that’s delivering their new songs and a sampling of the group’s 28 charting singles from their nearly 30-year history. PG’s John Bohlinger stopped in on the band’s two guitar players, Jerry Becker and Taylor Locke, and bassist Hector Maldonado, before their June 21 show at Nashville’s Ascend Amphitheater. They displayed the big bevy of instruments they use to recreate the Train sound live.
PS: Special thanks to techs Wayne Davis and Stephen Ferrera-Grand for help running down the rigs.
Brought to you by D’Addario Nexxus 360 Tuner.
Yellow Fever
Taylor Locke’s No. 1 is this all-stock, scarred Gibson Custom Shop Les Paul Special in TV yellow. For the record, Locke uses Shubb and Kyser capos, strings his axes with Dunlops, and uses the latter company’s picks and slides.
Hum-Doozie
When the song calls for a guitar with humbuckers, Locke goes with his all-stock Gibson Custom Shop R7 Les Paul Goldtop. It’s essentially a re-do of a 1957 Paul right down to the chunky C-profile neck and Indian rosewood fretboard.
Double Trouble
Some of Train’s songs require both electric and acoustic tones, and for those Taylor employs an Epiphone Casino, which tech Stephen Ferrera-Grand has outfitted with Fishman’s PowerBridge pickup system. The jack on the Casino is stereo, which enables splitting the stock electric pickups and a piezo pickup to two separate wireless packs, mounted side-by-side on Taylor’s guitar strap. The piezo signal hits a Sound Sculpture Volcano expression pedal volume controller that routes to an on/off switch on his Line 6 HX Effects stomper. The piezo sound is sent to front-of-house and monitors via a Fishman Aura Spectrum DI preamp.
Fab Filtration Across the Nation
When it’s time to go Filter’Tron, Locke straps on this tuxedo’d G6128T Vintage Select ’89 Duo Jet with a trusty Bigsby. In case the colors aren’t shining though in the photo, it’s an impressive black with metallic green sparkle, and Locke keeps it tuned a half-step down and strung with Dunlop .011s
Old Frontier
Locke aims for a couple of classic acoustic guitar tones, and for vintage vibe he reaches for this 1964 Epiphone Frontier. It’s from the original ’58 to ’70 run, with a Sitka spruce top and maple back and sides. These days, the model has been restored to the catalog courtesy of Gibson’s acoustic builders in Bozeman, Montana.
Clydesdale Tone
The workhorse sound of the Gibson J-45 resonates in the Train catalog, and this is one of many the band keeps in their 6-string arsenal.
Reso-Phonics
When the language of roots guitar needs to be spoken, Locke grabs his Gretsch resonator—part of the company’s Roots Collection of guitars. This one uses Gretsch’s patented Ampli-Sonic biscuit cone.
Playing the Dozens
When it’s time to wrangle acoustic jangle, this all-stock 1971 Ovation Glen Campbell 12-string gets to shine and shimmer. Unlike modern 6-string Campbell signature Ovations, this guitar lacks a cutaway. It has a Sitka spruce top, a walnut bridge, and an ebony fretboard—and sounds killer.
It’s Pronounced Oo-koo-lay-lay in Hawaiian
The hit “Hey, Soul Sister,” which reached No. 3 on Billboard’s pop chart in 2009, is guaranteed set-list material for every show. So, of course, Locke always has a requisite ukulele onstage. Here’s a look at the pair of Godin ukes in his rack.
Lean, No Cheese, 35 Watts
Locke uses a Top Hat King Royal 2x12 combo kept slightly off stage but loud enough to be audible. The 35-watter has three 12AX7s and four EL84 power tubes, and a GZ34 governing the rectifier. There’s a fat-off-bright switch, too. How does he run it? See the next photo.
All Set!
Here are his settings for the Top Hat. Note the master volume riding at 1 o’clock and his preference for the hi-input jack.
Is That a Banana, or….
Locke isn’t monkeying around: If his Top Hat goes down, he’s got a Vox C4 tucked aside as a spare. And a banana—maybe to snack on while Ferrera-Grand powers the amp up?
The Great Switcheroo
Locke’s electric guitar signal hits a Shure Axient Digital wireless and zooms into a Radial SW4 switcher. Tech Stephen Ferrera-Grand does the wireless switching on the Radial unit, in his guitar rack.
Above the SW4, you’ll see, peeking out, the acoustic boss: a Countryman DI. The Godin ukuleles follow the same signal flow as the acoustics, but along a different path into a separate Countryman DI.
Treading the Treadles
From the rack, the signal is sent out to a Pedaltrain ’board, outfitted with a Best-Tronics patchbay. The board contains a Dunlop DVP1XL volume pedal to a Line 6 HX. A second DVP1XL controls certain effects parameters, such as delay repeats and Leslie speed. The signal is then sent into a Boss NS-2 noise suppressor and on to the Top Hat amp.
Each speaker gets its own microphone: a Shure SM57 and an Audio-Technica AT4040.
For the majority of the set, Taylor keeps his HX set up with the following effects models: a Tone Bender fuzz (for leads and solos), a Klon Centaur (primary overdrive sound, almost always on), an MXR Timmy OD (neutral volume boost), EHX Deluxe Memory Man (modulated slap delay), Boss DM-2 Delay (long delay), and a Fender Vibratone (rotary). Taylor scrolls to other pedalboard scenes for song-specific effects, using tremolo for “Meet Virginia,” a Small Stone phaser for “AM Gold,” and so on.
Butterscotch Bliss
Another entry from the realm of the classics: Jerry Becker’s 2011 all-stock Fender American Vintage ’52 Telecaster has an ash body, a large U-profile neck, and, of course, a maple fretboard. It is strung with Dunlop DEN1046 Electric Nickel Performance+ string sets, running .010–.046. PS: Becker uses Levy’s straps and wireless pouches, Dunlop custom graphic signature picks, and Kyser Quick-Change capos.
Red Horse
This Gibson SG Classic from 2010 is stock and strung with Dunlop Performance+ .010–.046 sets—as are all his electrics. It has P-90s, a rosewood fretboard, and pearloid dot inlays up the neck.
Guitar of the Beast
This second-generation Gibson Les Paul Special reflects the body style that led Les Paul himself to cut ties with Gibson in the early 1960s. Nonetheless, with their two P-90s and lighter slab bodies, these are killer guitars. The double-horn cutaways make this 1973 a rare beast. It’s stock.
All Stock and Ready To Rock
Here’s Becker’s 1973 Gibson Les Paul Custom, left as it came from the factory. As you may recall, this model comes with “banjo”-style fret wire, to earn their reputation as—as Gibson put it on the model’s introduction in 1954—fretless wonders.
Modern Classic
This Gibson ES-339 was built in the first year the model was issued: 2007. The company introduced this guitar as a smaller—Les Paul sized—take on the ES-335, with a laminated maple-poplar-maple body, a maple center block, and spruce contour braces.
One More 45
Here’s yet another of Train’s Gibson J-45s. This one is a 2013 Custom Shop model in a wine red finish, and it is strung with Elixir 11050 80/20 Bronze Polyweb lights, gauged .012 to .053.
Nashville Tuning
Becker’s 1966 Gibson B-25 is set up in Nashville, or high strung, tuning. In this tuning, the wound E, A, D, and G strings are replaced with lighter-gauge strings tuned an octave higher than usual. In the old days, this had to be done by raiding 12-string sets, but some modern string makers produce Nashville tuning sets. So, Becker uses D’Addario EJ38H Phosphor Bronze .010–.027s.
Canadian Nylon
This 2017 Godin Multiac Nylon Duet Ambiance Natural HG has Fishman electronics that allows the internal blending of four microphone settings. It also sports a slim nut width (1.9"), a Richlite fretboard, and a chambered mahogany body. The strings: D’Addario EJ31 Pro-Arté Rectified Nylon Hard Tensions.
In the Pedal Pond
Becker uses a Fractal Audio Systems FX8 MkII combined with a Mission Engineering SP-1 Expression Pedal. There’s a Lehle D.Loop SGoS Loop Switcher, a Boss TU-3 Tuner, a Radial JR-2 Remote, and a Lehle P-Split Passive Splitter. It’s all powered by a Voodoo Labs Pedal Power 2 Plus.
But Wait, There’s More
Guitar tech Wayne Davis mapped out Becker’s signal flow for us. The electric guitars hit a Shure Axient Digital Wireless receiver and flow into a Radial JX62. There, the 6-strings can be directed into the Lehle D.Loop in and then out via a loop A send to the Fractal FX8. The loop A return then reroutes through a D.Loop out to the Radial again. Then there are amp options: a Matchless DC-30 or a Leslie combo preamp and 145 rotary speaker cabinet. Acoustic guitar arrives via the wireless and hits the PA via the JX62 DI out.
Green Sound Machine
This envy-shaded DC-30 is Becker’s big gun. It was the company’s first design and gets huff from four EL84s, with two preamp sections: one powered by two 12AX7s and the other by a single EF86. That’s a lot of tonal versatility.
The Understudy
This Vox AC30 acts as Becker’s back up.
Coming Up Roses
Bassist Hector Maldonado’s long search for an early ’60s P bass landed him this 1960 Fender Precision days before Train’s current summer tour. The gem was professionally refinished by Joe Riggio of Riggio Custom Guitars at some point, but other than that it’s as Leo intended over 60 years ago. Riggio helped connect Maldonado to the seller so he could acquire his dream bass.
No. 2
With the arrival of his new old P, this off-the-rack Fender American Vintage ’62 P bass reissue got demoted to the No. 2 slot. But Maldonado says it plays better than some of his vintage instruments, and this 4-string has been around the world a few times with Train. Both Fenders take D’Addario roundwounds (.045–.100).
Sir Paul’s Highball
If you’ve spent time with any of the last three Train albums, you’ve heard this limited-run Hofner Gold Label Violin Berlin model. It is made of German Nussbaum wood and has the company’s 511B staple pickups in a normal-spacing configuration. Hofner’s Gold Label instruments are highly limited editions.
Get Back!
For the ultimate Beatles’ vibe, Maldonado uses this Hofner B-Bass HI-Series Violin model. It provides the desired “pluck” sound of 1964. Both of his stage Hofners take D’Addario XL Chromes, flatwound (.045–.100).
Spanish Flair
“Cleopatra” off AM Gold has a flamenco guitar part. Maldonado is classically trained, so he was the obvious choice to handle it, plus Becker and Locke are already busy with their own guitar chores on the song. Hector’s setup on his Yamaha CG172SF is creative. He uses a blend of strings from his Fender Bass VI and nylon guitar strings to hold down the low end and shred fingerstyle.
Racked and Ready
A Mesa/Boogie Subway D-800+ powers his basses, while an Avalon U5 Class A Active Instrument DI give a clear signal to front-of-house. And like his compatriots, he’s running a Shure AD4D rackmount wireless system.
More on the Floor
Maldonado has more pedals on the floor than his fellow Trainmen. His stomp station consists of a trio of mini MXRs—a Carbon Copy, Phase 95, and Vintage Bass Octave—plus an Electro-Harmonix Holy Grail Nano reverb, a Tech 21 SansAmp Bass Driver DI, a DigiTech Bass Driver OD, an Origin Effects Cali76 compressor, and a Mesa/Boogie Five-Band Graphic EQ. A Dunlop Volume (X) DVP3 and a Boss TU-3s mini Chromatic Tuner keeps his instruments reined.
The majestic Roland Space Echo is having a bit of a resurgence. Here’s a breakdown on what makes it tick, and whether or not it’s right for you.
In this article, we delve into one of the most cherished gadgets in my guitar collection, the Roland Space Echo RE-201. This iconic piece of equipment has been used by legendary musicians like Jonny Greenwood, Brian Setzer, and Wata from Boris, which only heightened my desire to own one. A few years ago, I was fortunate to acquire a vintage RE-201 in good condition and at a reasonable price.
Using the RE-201 today has its advantages and disadvantages, particularly due to its size, which is comparable to an amplifier head. When compared to modern equivalents like delay pedals or software plugins that closely emulate the original, the vintage RE-201 can seem inefficient. Here, I share my personal and subjective experience with it.
The RE-201 is a tape echo/delay effect that gained popularity in the 1970s and ’80s. Unlike the more complex analog BBD delays or digital delays, tape delays use magnetic tape to simultaneously record and play back sound via a magnetic tape head (similar to a guitar or bass pickup). Because the recording head and playback head are in different physical locations, there is a time gap during the recording and playback process, creating the “delay” effect. This concept was first discovered by Les Paul in the 1950s using two tape machines simultaneously.
However, this method has a drawback: The magnetic tape used as a storage medium has a limited lifespan. Over time, the quality of the tape degrades, especially with continuous use. This degradation is marked by muddy, wavy sounds and unavoidable noise. Yet, this is precisely where the magic of real tape echo lies! New tapes produce clearer, hi-fi sounds, while older tapes tend to produce wavy sounds known as “modulated delay.” Additionally, increasing the number of tape-head readers extends the gap time/delay time of the output, and activating multiple tape-head readers simultaneously creates unique echo/delay patterns.
“This degradation is marked by muddy, wavy sounds and unavoidable noise. Yet, this is precisely where the magic of real tape echo/delay lies!”
Just as how fuzz and distortion effects were discovered, the “imperfections” of tape also represent a historical fact about how the creative process in music follows an absurd, non-linear, and unique pattern. In everyday practical life, signal delay is something typically avoided; however, in a musical context, delay adds a deeper dimension. Today, it’s hard to imagine a pedalboard without a delay effect at the end of the chain.
This uniqueness inspired me to create Masjidil Echo, embracing the “imperfection” of a vintage tape echo/delay with magnetic tape that hasn’t been replaced for years. Many newer pedals, such as the Boss RE-20, Strymon El Capistan, and the Catalinbread Echorec and Belle Epoch, draw inspiration from vintage tape repeat machines. Each has its unique interpretation of emulating tape echo, all in a more compact and maintenance-free format. Real tape delay requires periodic maintenance and has mostly been discontinued since the mid 1980s, with Roland ceasing production of the Space Echo entirely in 1985.
However, in recent years, interest in real tape echo has surged, perhaps due to nostalgia for past technology. As a result, many vintage delay units have appeared on marketplaces at increasingly gargantuan prices! If you’re considering acquiring one, I recommend thinking it over carefully. Are you prepared for the maintenance? Will you use it for regular performances? Are you ready for the fact that magnetic tape will become increasingly difficult to find, potentially turning your machine into a mere display piece? I don’t mean to instill fear, but the real deal, in my opinion, still can’t be fully emulated into a more practical and future-proof digital format.
So, I’ll leave you with one final question for consideration: What if the genealogy of technology were reversed chronologically, with multihead/multitap delay discovered digitally in the 1950s, and in the 2000s, a technological disruption led to the invention of mechanical tape echo to replace digital technology? Which would you choose?
In collaboration with Cory Wong, the Wong Press is a 4-in-1 Press pedal features Cory’s personal specs: blue & white color combination, customized volume control curve, fine-tuned wah Q range, and a dual-color STATUS LED strip indicating current mode/pedal position simultaneously.
In collaboration with Cory Wong, this Wong Press is a 4-in-1 Press pedal features Cory’s personal specs: Iconic blue & white color combination, customized volume control curve, fine-tuned wah Q range, and a dual-color STATUS LED strip indicating current mode/pedal position simultaneously.
Renowned international funk guitar maestro and 63rd Grammy nominee Cory Wong is celebrated for his unique playing style and unmistakable crisp tone. Known for his expressive technique, he’s been acclaimed across the globe by all audiences for his unique blend of energy and soul. In 2022, Cory discovered the multi-functional Soul Press II pedal from Hotone and instantly fell in love. Since then, it has become his go-to pedal for live performances.Now, two years later, the Hotone team has meticulously crafted the Wong Press, a pedal tailored specifically for Cory Wong. Building on the multi-functional design philosophy of the Soul Press series, this new pedal includes Cory’s custom requests: a signature blue and white color scheme, a customized volume pedal curve, an adjustable wah Q value range, and travel lights that indicate both pedal position and working mode.
Cory’s near-perfect pursuit of tone and pedal feel presented a significant challenge for our development team. After countless adjustments to the Q value range, Hotone engineers achieved the precise WAH tone Cory desired while minimizing the risk of accidental Q value changes affecting the sound. Additionally, based on Cory’s feedback, the volume control was fine-tuned for a smoother, more musical transition, enhancing the overall feel of volume swells. The team also upgraded the iconic travel lights of the Soul Press II to dual-color travel lights—blue for Wah mode and green for Volume mode—making live performances more intuitive and visually striking.
Features
- True Bypass
- 4 in 1 functionality (volume, expression, wah, volume/wah)
- New dual-color STATUS LED strip indicating pedal mode and position in real time
- Cory’s custom volume curve and wah Q control
- Classic-voiced wah tone with flexible tonal range
- Active volume design for keeping lossless tone
- Separate tuner and expression outputs for more connection possibilities
- 9V DC or 9V battery power supply
Introducing the Hotone Wong Press - Cory Wong's signature Volume/Wah/Expression Pedal - YouTube
Check the product page at hotone.com
“The Player II Series represents our continued evolution in design and functionality,” said Justin Norvell, EVP of Product, FMIC. “We listened to the feedback from musicians around the world and incorporated their insights to refine and innovate our instruments. The re-introduction of rosewood fingerboards is a restoration of the ‘original Fender recipe’ and will no doubt be a fan favorite - but we didn’t want to stop there. We’ve also incorporated our rolled fingerboard edges for a broken-in feel, upgraded hardware, and have some new body options as well- which underscores our commitment to providing players and creators with the tools they need to express their unique sound and style. The Player II Series is not just an upgrade, it's a detailed re-imagining of our core silhouettes, highlighting our dedication to quality and the continuous refinement of our instruments.”
Additionally, Player II offers new options for chambered ash and chambered mahogany bodies for the Player II Stratocaster and Telecaster models, which will be available in October. Designed for musicians ready to elevate their craft, the Player II Series sets a new standard for quality and performance in the mid-price range.
Fender Player II Stratocaster HSS Electric Guitar - Coral Red
Player II Strat HSS RW, Coral RedFender Player II Jaguar Electric Guitar - Aquatone Blue
Player II Jaguar RF, Aquatone BlueThis reader solicited the help of his friend, luthier Dale Nielsen, to design the perfect guitar as a 40th-birthday gift to himself.
This is really about a guy in northern Minnesota named Dale Nielsen, who I met when I moved up there in 2008 and needed somebody to reglue the bridge on my beloved first guitar (a 1992 Charvel 625c, plywood special). Dale is a luthier in his spare time—a Fender certified, maker of jazz boxes.
Anyway, we became friends and I started working on him pretty early—my 40th birthday was approaching, and that meant it was time for us to start designing his first solidbody build. If you stopped on this page, it’s because the photo of the finished product caught your eye. Beautiful, right? The 2018 CCL Deco Custom: Never shall there be another.
Old National Glenwood guitars were my design inspiration, but I wanted a slim waist like a PRS and the like. We used a solid block of korina to start, routed like MacGyver to get the knobs and switches where I wanted them. Dale builds all his own lathes and machines (usually out of lumber, y’all), as the task requires. This beast took some creativity—it’s tight wiring under that custom-steel pickguard. Many were the preliminary sketches. Four coats of Pelham blue, 11 coats of nitro. Honduran mahogany neck, Madagascar ebony fretboard with Dale’s signature not-quite-Super-400 inlays. He designed the logo; I just said, “Make it art deco.”
We sourced all the bits and bobs from StewMac and Allparts and Reverb and the like, mostly to get that chrome look I so adore. Graph Tech Ratio tuners, Duesenberg Radiator trem (had to order that one from Germany), TonePros TP6R-C roller bridge. The pickups were a genius suggestion from the builder, Guitarfetish plug ’n’ play 1/8" solderless swappable, which means I have about 10 pickups in the case to choose from: rockabilly to metal. And both slots are tapped, with the tone knobs serving as single- to double-coil switches. I put the selector on the lower horn to accommodate my tendency to accidentally flip the thing on Les Pauls—definite lifesaver.
Reader and guitar enthusiast, Cody Lindsey.
Dale offered to chamber this monster, but I said what doesn’t kill you makes you stronger. It weighs in at 11 pounds, if it’s an ounce. We carved the neck to match a ’60s SG, so it’s like the mini bat you get at the ballpark on little kids’ day. Easy peasy. 1 11/16" nut, 25" scale, jumbo frets, just 2 1/8" at the 12th fret.
Delivery in its lovely, hygrometer-equipped Cedar Creek case actually happened a month or two shy of my 41st, but hey, you can’t rush these things. We ended up with a studio Swiss Army knife; it does a bit of everything and does it effortlessly. A looker, too. Dale didn’t spend his career doing this kind of thing—he was in IT or some such—and I imagine he’s winding this “hobby” of his down these days, enjoying retirement with a bottle of Killian’s and a lawn chair at Duluth Blues Fest. But this guitar will live on as a marker of his skill and otherworldly patience. It sits at the head of the class in my practice room, welcoming any visitors and bringing a smile to my face every day. And Dale, my friend, I’ll be 50 before you know it....
Cody requested that Dale design an art deco logo for the guitar’s headstock.