The Aerosmith axeman recounts how he ripped the blazing lead on the Rocks hit, dishing some critical history along the way.
Behind Steven Tyler’s unhinged howls, Aerosmith’s twin-guitar attack with Joe Perry and Brad Whitford cemented them as one of the greatest hard-rock bands of the ’70s. “Last Child,” the street-strutting, hard-blues hit off their breakout 1976 record Rocks, is one of the greatest demonstrations of this dangerous duo’s interplay. While Perry holds down the funky rhythmic chord stabs, Whitford burns through a volcanic, first-take solo. Did any pedals help snare that screaming tone? Nope. Just a ’57 goldtop Les Paul and a 100-watt Marshall.
That combo just “makes you play real good,” Whitford says with a grin on this week’s episode. Whitford gives Shifty the background story on how Rocks came together between the band’s Massachusetts rehearsal space and the Record Plant in New York. They dig deep on Aerosmith’s influences and the guitar players that shaped Whitford’s lead style, including the shredders that knew when to pause. “Whatever you play, you’re still replicating the human voice for the most part, and you have to take a breath,” Whitford notes.
Later on, Brad’s son Graham—an established player in his own right—joins the episode to talk about raiding his dad’s guitar and amp vault, and Brad muses on a big question: Will Aerosmith’s upcoming tour be their last?
Aerosmith - Last Child (Live From The Office Depot Center, Sunrise, FL, April 3, 2004)
Credits
Producer: Jason Shadrick
Executive Producers: Brady Sadler and Jake Brennan for Double Elvis
Engineering Support by Matt Tahaney and Matt Beaudion
Video Editors: Dan Destefano and Addison Sauvan
Special thanks to Chris Peterson, Greg Nacron, and the entire Volume.com crew.
Marty Friedman's new single "Dead of Winter" from his upcoming album Drama features vocals by Chris Brooks.
Marty Friedman shares "Dead of Winter" the second single from his upcoming new solo album 'Drama', due out May 17th via Frontiers Music Srl. The track features vocals by Chris Brooks from Like A Storm and while normally an instrumentalist, this is Marty's first solo release featuring a vocalist.
"Dead of Winter" is accompanied by a new music video starring Skylar Erna and is available below.
About the track, Marty had this to say:
"The lyrics of 'Dead of Winter' as well as the story in the video, both sum up the way I would like people to feel about my music in general-- something that will be there to uplift you when the times are hardest and give you a tangible jolt of positivity to last until life inevitably smooths out."
Marty Friedman - "Dead of Winter" (featuring Chris Brooks of Like A Storm) - Official Music Video
May 17th will see the release of Marty's latest solo album, Drama where he only slightly revisits the atmospheric elements of his acclaimed 1992 release Scenes, elevating them to a modern and exotic collection of epic, extravagant, and unapologetically emotional mini-symphonies.
Tracks like "Illumination" and "Mirage" transport listeners to captivating realms, evoking sudden tears and chills. The entire album spotlights Marty's mesmerizing melodies, game-changing arrangements, and heart-tugging motifs, even more than any of his previous work.
Recorded in Italy, where Marty had access to a treasure trove of vintage guitars along with his modern signature models, 'Drama' is a pure, uplifting musical experience.
The new music video for "Dead of Winter" stars Skylar Erna, internet personality and daughter of Sully Erna from Godsmack. Skylar and Sully represent The Scars Foundation - a charity devoted to starting conversations about mental health to raise awareness about the issues facing so many people in our communities today.
With the rise of suicides, bullying, addiction, abuse, and so many other challenges, The Scars Foundation is dedicated to providing resources and tools to educate and empower people on a global level who struggle with these burdens.
May is Mental Health Awareness Month. If somebody you know is going through a hard time and needs help, please visit HERE for resources.
For more information, please visit martyfriedman.com.
This blendable passive system might be your single-coil solution.
Hello and welcome back to Mod Garage. This year, the Fender Stratocaster is celebrating its 70th birthday. Happy birthday, and all the best for your next 70 years! To celebrate, I chose a Strat as our guinea pig for this month. But everything we are talking about applies to all single-coil-equipped guitars.
Let’s have a deep look into what can be done to get rid of single-coil hum, which can be very annoying, especially when playing live. I’m sure you all know the situation: Your band managed to get an important Friday night gig at, let’s say, Bob’s Country Bunker. You and your bandmates arrive in time to set up your equipment, naturally with everything plugged into the same circuit as Bob’s popcorn machine, dishwasher, and sandwich maker. You plug in your Strat, turn up your amp, and there’s a loud humming noise coming out of it.
A single-coil pickup has one coil with six magnet rods and two bobbins holding everything together. It not only picks up the strings, but also all kinds of external magnetic fields generated by transformers and other electromagnetic devices. But when two coils are wound in opposite directions and are working together, the hum will get canceled. This is an old principle dating back to the beginning of the 20th century, and it’s how a humbucker pickup works. In the past, guitarists had to struggle with radio stations, fluorescent tubes, transformers, and the like; today, it’s more digital fallout and, of course, digital power supplies of all kinds.
The pickup industry created all kinds of hum-canceling pickups in single-coil shape, most commonly stacked and double-rail-style pickups. So, a humbucker pickup can be the ticket out of such unpleasant live situations. But all of these options generate a different magnetic field compared to a single-coil pickup, resulting in a different tone. The resonant frequency is shifted downwards a little bit because the ohmic resistance and inductance of the two coils are added together. The tone gets milder and warmer, with more midrange—you all know this tone. Splitting such a humbucker will sound more single-coil-like, but it will pick up hum again. Connecting both coils in parallel rather than in series will also sound more single-coil-like and is hum-canceling, but it’s not a real single-coil tone.
Using a reverse wound, reverse polarity (RWRP) pickup such as a Strat’s middle pickup will get you at least two hum-free switching positions (bridge+middle and neck+middle), but even this sounds different. Going active is another way to fight humming noises, and these special pickups sound more or less like a real single-coil, too.
But what if you don’t want to compromise? Is pure single-coil tone with no hum possible? Yes and no! It is possible to come close, but one day, a digital gremlin may find a way to annoy you to a certain degree. And there are extreme situations where only a humbucker will work.
One step in the right direction is shielding the pickups and cavity of your guitar. Shielding the compartment of a guitar the right way is a challenge on its own, and I will cover this in a future installment of this column. But even if all the shielding is done the right way, the sound of the pickup will be altered to a certain degree, which is the nature of the beast. And the shielding is always there, so you can’t switch between pure single-coil and shielded single-coil tone.
So, what about switchable hum-canceling for your guitar? This way you could have both: pure single-coil tone and hum-free operation when needed. And if this could not only be made switchable but also controllable, you could balance your tone between the two.
Here is a solution based on principles from Bill Lawrence, which my dear friend Bernd C. Meiser from the BSM company has refined in order to make it more controllable: a variable dummy coil.
“But what if you don’t want to compromise? Is pure single-coil tone with no hum possible? Yes and no!”
In simple terms, a dummy coil is an additional pickup that is identical to the other pickups but without magnets. It has a phase, but no polarity. A dummy coil accepts the electric signal created by the magnetic single-coil pickup and reverses it, which will remove a large portion of the hum. In the process, a very small amount of the treble signal is lost as well. However, this treble loss is far less compared to stacked or dual-rail humbuckers.
The specs of the dummy coil need to be close to the pickup you are complementing. So, any universal dummy coils advertised to work with all single-coil pickups will only work to a certain degree but not perfectly. Instead, it’s best if you order a dummy coil that matches your pickup. The company who made your pickup will know the formula, and a dummy coil from them will be super effective. If that pickup is from a larger manufacturer, you’ll need to find out specific parameters—wire gauge, wire type, number of turns—so a custom pickup company can make a matching dummy coil for you.
The simplest way to set up a dummy coil would be to connect it permanently, so it’s 100 percent active all the time. For more flexibility, you can add a switch to turn the dummy coil on and off. But the most flexible way is to use a pot to control the dummy coil, so you can dial in pure single-coil tone, 100 percent dummy-coil hum-removing, and everything in between—in other words, so you can balance tone and hum-free-ness depending on the certain playing situation.
To do so, connect a 0.01 uF capacitor in parallel to the dummy coil. The high-end frequencies will no longer pass the dummy coil and its inductance; they will be drained low-resistance to ground. For the bass frequencies, the capacitor is still high-resistance so the dummy coil is active. This way you will have humbucking functionality for the bass frequencies, but pure single-coil tone in the high frequencies—what a perfect and clever solution from Bill Lawrence. If you now connect the capacitor and the dummy coil to a pot, you have a controllable dummy coil as described above.
You can experiment with the capacitor value for fine-tuning your system; 0.01 μF is a pretty good value to start. With a smaller cap, you shift the humbucking effect toward the high frequencies and vice versa. A smaller cap means more overall humbucking (bass and highs) and a larger cap means less overall humbucking, with the high and middle frequencies staying untouched.
A Stratocaster is perfect for this mod because it has two tone controls. One will be converted to a Telecaster-style master tone control, while the other will become the new dummy-coil controller.
For a Stratocaster with three vintage flavored single-coil pickups, I recommend the following pot configuration (all audio taper): 250k volume, 500k tone, 500k dummy-coil controller. This way, in humbucking mode, the two coils are connected in series rather than in parallel, so the resonance peak will be dampened. The two 500k pots will help compensate for this. The 250k volume is always the way to go in a passive guitar system to ensure the best and most even control. The 500k tone pot can be a little bit over the top in pure single-coil mode, but simply roll it down a little and you are in the 250k ballpark—problem solved!
Here we go for the wiring. It’s not hard to do and mostly uses the parts that are already there:
Illustration courtesy Singlecoil
That’s it! Next month, we will talk about some alternative ways to service a Stratocaster that can be real time savers, so stay tuned.
Until then ... keep on modding!