Don't miss your chance to get loud with these amps!
REVV GENERATOR 120 MK3
The Revv Generator 120 MK3 is the world's first stereo-direct-output reactive load & IR Loading tube amp. It brings you 4 channels of all-tube finely-tuned tone based on feedback from touring artists, session guitarists, & engineers. It also features Two notes Torpedo-embedded technology for going direct to FOH, studio monitors, or headphones. No cabinet required. A built-in noisegate & lush reverb are accompanied by a host of switching & voicing options to make getting the sound in your head faster than ever.
The Blue Channel is chimey with tons of headroom, & now includes a "Wide" switch to give you a wide-range frequency boost for more push & sustain. The Green Channel features 3 all-new drive modes to take this dynamic channel from edge of breakup, to fat overdriven tones. The Purple Channel is famous for its razor-sharp metal clarity, & now in MK3 it receives more low end & saturation with no loss in tightness. Finally, highest gain - Red Channel has an all new touch-sensitive feel which takes you from warm oldschool overdrive to the most massive modern tones available.
Revv Amplification is committed to bringing you the most complete amplifier experience available. Clarity, feel, & tone – for stage, studio, & home.
HX 100
The PRS HX 100 captures the flexibility, power, and balance of late 60's British-inspired tone. A continuation of PRS's popular HXDA amplifiers, PRS HX amps feature a refined control layout and a newly-documented "Authentic Hendrix" Touring Circuit. This circuit is heavily inspired by one of Hendrix's personal amps, purportedly used at Woodstock, which Paul Reed Smith and PRS Amp Designer Doug Sewell were able to study in 2018.
Keeley Custom 12
Designed in collaboration with Robert Keeley of Keeley Electronics as a follow-up to the bestselling Custom 10, the Keeley Custom 12 is built to seamlessly integrate your pedals into the heart of an all-tube Supro amplifier. The preamp and 2-band EQ section are voiced perfectly for running your gain pedals in front of the amp, while still maintaining Supro's signature midrange heft and phenomenal touch dynamics.
MOD® Kits, MOD102+ DIY Guitar Amp
The MOD 102+ is a great place to start for those interested in building their own tube amp. It is based on a classic American tube-circuit design combined with a British-style Class A output tube section that produces 8 Watts of power. At low volume it produces a clean, chimey tone that moves into smooth overdrive at higher volumes. The amp features a three position progressive toggle switch for off-standby-power. In addition, each control features push-pull functionality - pull out the bass control knob for "mid boost", pull out the treble control knob for "bright", pull out the volume control knob for "turbo". These features along with a JJ ECC803-S (a long plate 12AX7 known for its complex mid range tones) allow for a wider variety of tones and extra control for the user. All parts are included along with a pre-drilled steel chassis, wire, and tubes.
Click here for audio clips.
Click here to follow Amplified Parts on Instagram
Two Rock Studio Signature Amp
The Two-Rock Studio Signature is the latest generation of the single channel 35 watt amplifiers. Making some changes to the original Studio Pro 35, the new Studio Signature model remains a 6L6 clean amplifier for a solid pedal platform with some additions that will make the Studio Signature a continued legendary product.
New build techniques, layouts, and materials implemented over the last few years were the key starting points to this amplifier's new construction. The added boost toggles are an obvious change at first glance, allowing the use of our potentiometers with custom tapers. Reverb send control on the back panel and a Return control on the front give room for these toggles. The Gain Structure switch can also be found on the back, allowing the same functions as the flagship Classic Reverb Signature essentially giving 3 front-end types to this already versatile clean amplifier.
New aluminum chassis, anodized in silver or black and donning new silver knobs, a black bronco cab, and black matrix grill cloth give this amp a stunning new look.
Mighty Bass 50BT - Modeling Bass Amp with IR
Mighty Bass 50BT is a versatile bass amp for practice, rehearsing and recording. It's equipped with a premium 6.5" loudspeaker and driven by a 50-watt classic D power amp.
NUX's iconic TSAC modeling technology provides various nice-sounding amp models and all the essential effects with great playability & response, while IR offers you more cab sounds! You can engage drum function with APP, and record phrase loops with footswitch.
Mighty Bass 50BT has 3 channels, you can save one preset in each. For deep tone editing, simply use its Mobile APP and PC Software!
Highlights:
-Bass Amp Modeling with Cab IRs, expanding possibilities of tones
-IR loading (1024 samples) with Edit Software
-Whitebox compressor effect offers you analog touch & response
-Independent IR toggles for Amp and DI out
-USB Audio Stream for recording interface with routing setup
-Footswitch to remote Drum&Loop (60s)
Click here for audio clips
Click here for video clips
Click here to follow NUX on Instagram
The in-demand Nashville session player unveils what comes with him when he leaves the studio.
Recording artist, hit songwriter, and sought-after session player Jedd Hughes invited PG’s John Bohlinger to his soundcheck before his gig at Nashville’s 3rd and Lindsley. Hughes came in with a home-made T-style, a vintage hollowbody, and some custom acoustics. Check it out.
Brought to you by D’Addario: https://ddar.io/wykyk-rr
Homebrew Tele
Hughes built his Tele using a one-piece lightweight ash body with a Gene Parsons long-pull B-bender. Hughes shaped the maple neck to a soft V profile using StewMac tools. The pickups were both designed by Ron Ellis: There’s a 50B in the bridge and a Killa in the neck position to match the 50B. The harness is from a 1955 Fender lap steel. All of his electrics are strung with D'Addario .010-.046s.
This 1967 Guild ST-403 Studio hollowbody was chopped to make room for full-size humbuckers.
Hughes' Acoustics
This 2004 DeGruchy was built specifically for Hughes, made to replicate a golden-era Martin D-45. The acoustics are strung with D'Addario .012-.052 sets, which Hughes strikes with Fender medium picks. All acoustics have K&K Sound Pure Mini pickups running through them.
Hughes’ second-favorite acoustic is this slope shoulder DeGruchy.
For a nylon string, Hughes goes with his old gut string Del Vecchio.
Party For Two
Hughes uses two amps combined, in a non-stereo setup. Amp number one is his 1952 Gibson GA-20, which has been rehoused in a Tweed Deluxe cab with a Celestion G12-65.
Number two is his tried-and-true 1962 Vox AC30.
The Boardroom
Hughes runs a larger board for his electric and a smaller one for his acoustic guitars. The electric board includes a Prescription Electronics Experience, Clark Gainster, a prototype XTS Shadow Box, Greer Southland, Dunlop volume pedal (with tuner out), VFE Old School tremolo, Boss PS-5 Super Shifter, Guyatone PS-023, EHX Deluxe Memory Man, Echo Fix EF-P2 Spring Reverb, and finally a Shaw Audio Vacuum Tube Splitter Buffer, which splits two mono lines to the amps.
Hughes runs his acoustics into a Grace Design FELiX2 preamp. From there, it hits a Guyatone PS-023, a Universal Audio Golden Reverberator, and a Boss TU-2.
Shop Jedd Hughes' Rig
Vox AC30
Dunlop DVP3 Volume (X) Volume and Expression Pedal
Boss PS-6 Harmonist Pedal
Electro-Harmonix Deluxe Memory Man Analog Delay / Chorus / Vibrato Pedal
Grace Design FELiX 2 Instrument Preamp/Blender - Silver
Universal Audio Golden Reverberator
Boss TU-2
D'Addario NYXL1046 NYXL Nickel Wound Electric Guitar Strings - .010-.046 Regular
This pedal offers dual engines, extended IR capability, and a powerful tri-core CPU.
The original BigSky pedal was released in 2013, becoming an icon by redefining how guitariststhe world over thought about reverb, and the new BigSky MX expands on the original design inevery facet. With a super fast tri-core 800 MHz ARM processor, BigSky MX can run two reverbalgorithms at once and route or pan the audio in a number of different ways. The new advancedconvolution engine allows a huge ten seconds of stereo impulse response playback per instance, along with full IR editing and a suite of custom long captures of classic studio tools and oddballvintage gear. Many of the new reverb algorithms are brand-new from the ground up, and weretuned using a state-of-the-art gradient descent algorithm to remove any unwanted artifacts andringing. A crisp OLED display provides clear information about the currently loaded preset, whichmakes managing dual reverb patches a snap.
BigSky MX features stereo I/O and discrete ClassA JFET input preamps, EXP/TRS MIDI, DIN MIDI and USB-C for connection to Strymon’s Nixie 2software editor.“We’ve been working on this thing for the better part of four years”, said Gregg Stock, Strymon’sCEO and co-founder. “It’s been a labor of love, and we knew that the legions of original BigSkyfans were counting on us to get it right the first time. In the end it exceeded all of ourexpectations, and we’re really happy with how it turned out.” Stock continues, “The 12 enginesin BigSky MX produce the absolute best ambiences we’ve ever made, and the ability to run twoengines at once and the impulse stuff is a major step forward.”
Pete Celi, Strymon’s co-founder and DSP guru adds “playing around with BigSky MX duringdevelopment has been a blast. The new algorithms are bigger, wider and cleaner than anythingwe’ve been able to achieve in the past, and impulse response playback is a welcome addition.We’ve included our very own long captures of some classic studio devices and some oddballvintage units collected by one of our engineers too, so there is an entire world of creative reverbin there to explore”.
The BigSky MX was designed and is manufactured in Los Angeles in the USA, and is available now directly from Strymon and from dealers worldwide for $679 US.
Strymon BigSky MX: Next-gen Reverb & Celestial Space-shaping — A Worthy Heir?
More info at https://www.strymon.net.
Slayer’s Kerry King Reclaims the Throne with His Solo Debut
Photo by Annie Atlasman
When Slayer played their last show in November 2019, Kerry King already knew he had no intention of slowing down musically. What he didn’t know was that the pandemic would be the conduit to a second act. But, as German theatrical director, dramaturge, and playwright Bertolt Brecht once astutely observed, “Art is not a mirror held up to reality, but a hammer with which to shape it.”
Duane Eddy Has Died at 86
Photo by Joseph A. Rosen
The guitar legend passed away after a battle with cancer Tuesday at the Williamson Health hospital in Franklin, Tennessee, according to his wife, Deed Abbate.
Learn the “Last Child” Solo With Aerosmith’s Brad Whitford
The Aerosmith axeman recounts how he ripped the blazing lead on the Rocks hit, dishing some critical history along the way.
Line 6 Catalyst CX Amp Demo
Dive deep or keep it simple with an ultra-flexible, affordable amp that covers huge stretches of the sonic waterfront.
Death By Audio Octave Clang V2 Review
Every instrument is a tool for expressing feeling. But when you have to convey a certain range of emotions spanning anguish, the rush of sonic anarchy, and the exhilaration of total liberation, octave fuzzes are tops. Generally speaking, octave fuzz isn’t an effect you use casually.
Want Pure Single-Coil Tone from Your Guitar with No Hum? Try a Variable Dummy Coil
Hello and welcome back to Mod Garage. This year, the Fender Stratocaster is celebrating its 70th birthday. Happy birthday, and all the best for your next 70 years! To celebrate, I chose a Strat as our guinea pig for this month. But everything we are talking about applies to all single-coil-equipped guitars.
Latest News
Genzler Amplification Launches Kinetix 800 Bass Amp