
Four blue-chip engineers—Dave Fridmann, Eric Bauer, Colin Marston, and Jarvis Taveniere—explain what you need to do to prepare your home recordings for prime-time mixing—and sonic glory.
Some time ago, home recording was a field largely occupied by ambitious amateurs who weren't quite ready for a pro studio and wild eccentrics whose limitless creativity knew no bounds. This made the rare home-recorded release a special treat, and albums by artists such as Brian Wilson, Daniel Johnston, and Guided By Voices gave us a glimpse into their raw creative processes. But as the ubiquity of laptop DAWs replaced 4-track machines and portable digital recording consoles as the de facto home setup, the field became democratized.
It's not news that recording gear has gotten cheaper in recent years. Nowadays, for the price you would have paid for a low-end 4-track back in the '90s, you can buy a mid-level interface, monitors, and a decent enough microphone to make studio-quality recordings. "If you've got a [Focusrite] Scarlett, an SM57, and Ableton Live, you have so much more in front of you than the Beatles ever dreamed of having," says Dave Fridmann, producer/engineer and owner of Cassadaga, New York's Tarbox Road Studios, who has famously mixed home-recorded albums by Tame Impala and his longtime collaborators the Flaming Lips. "There's no reason why you can't do anything you can think of with that gear. Anything." If that's not encouraging enough, consider that even major-label artists such as Fiona Apple and guitarist-producer Steve Lacy have, at times, avoided high-budget studio sessions, opting to record at home and use the same inexpensive tools that are accessible to the rest of us.
While those of us who want to can—and, during the pandemic, most likely did—get to work on our next masterpiece in the comfort of our homes, some limits remain. And for many of us who have been recording on our own, the biggest limitation may be our own ability to mix. What do we do when it's time to make the final decisions on how our tracks should sound? It might seem intuitive, but anyone who has ever tried to mix his or her own recordings knows that the right sound can be hard to nail down and the limitless list of plug-ins can be overwhelming. Lucky for us, there are plenty of professional engineers who are ready to mix our home recordings and elevate them to the level of sonic majesty. With that in mind, we tracked down four of our favorite engineers and discussed the process of having an engineer mix our home-studio tracks.
When Two Brains Think as One
Artists should feel free to reach out to their mixing engineers as early in their recording process as possible, says Jarvis Taveniere, who is happy to share helpful tips with his clients, from brainstorming mic placement to setting up a room.
The very first step is to find the right person for the job. You'll probably want to pick someone who has worked with bands you know, bands you like, or bands you think sound like what you're working on. You should feel comfortable reaching out to engineers and asking questions. Good engineers are only going to want to mix your record if they feel like they can add something to it, and you should feel the same way about them.
Jarvis Taveniere, who plays in the band Woods and has engineered albums by bands such as Fleet Foxes, King Gizzard & the Lizard Wizard, and Real Estate, tells us that it's of utmost importance that an artist and engineer really click. "I don't want to have to convince people that their vision of their song is wrong," he says. "If I don't like their vision of it, then we shouldn't be working together, and I say that with love."
"It's cool to listen to yourself through one mic and be like, 'What does it sound like? Does this sound good? Does it sound harsh?'" —Jarvis Taveniere
You'll also want to consider how you'd like to work together. It's always fun and can be instructive to attend a mixing session, but if you don't have a good fit locally, remote mixing opens up your options to just about anyone you can think of—who fits your budget, of course. Technical details may narrow down your search, too. But don't be dissuaded if it doesn't make sense to work with the engineer of your dreams right now. Every engineer has his or her own way of mixing, and that means different requirements for the files you actually send them—more on that later. And if you've already recorded your album without your engineer's parameters in mind, you may have more limitations than if you haven't gotten started.
Before You Hit “Record”
The engineers we spoke with agreed that, most of the time, clients don't reach out about mixing until their recording is mostly finished. But if you're considering tracking at home and can figure out who you'd like to work with before you begin, that mixing engineer can offer some insight about recording and collaborating.
Taveniere says contact before recording is his "perfect scenario," and believes it can be helpful to discuss things such as mic selection, mic placement, and even simple room treatment options to avoid potential mixing headaches. For example, he explains, "The room is important. If you're recording something at home, close-miking guitar amps is easy and you can do bass and keys direct, so the few things that can have ambience can open up the record. If you're in a room that's rectangular or square, with parallel walls, and you have a condenser on an acoustic, you're probably gonna hear some of the room, you're gonna hear some of those reflections." With the help of a sample recording and a photo, he's happy to help clients get a warm and focused room sound. "Throwing down some rugs, building or buying some 2'x4' absorption panels … it's fun to set up your space so you can have a good sounding room." Addressing such issues in advance will not only make mixing easier, it may give mixers like Taveniere more flexibility to make their mark on your recordings.
Colin Marston, seen here hard at work at his Menegroth: The Thousand Caves studio, advises you to keep your tracking levels low.
If you're not ready to commit to a mixing engineer before you start tracking, there are some simple tips you can follow that will make things easier later. "Use minimal mic setups, one or two mics at the most, especially when you're in a practice space," recommends Eric Bauer, who runs Bauer Mansion studio in San Francisco, where he's worked with Thee Oh Sees, Ty Segall, and many more. Taveniere agrees, adding, "It's cool to listen to yourself through one mic and be like, 'What does it sound like? Does this sound good? Does it sound harsh?' You can make adjustments if you go slow and think about it, and make decisions."
This is very easy to apply to electric guitar tracking. "If you put a mic in front of it and get a level that isn't clipping, that's good enough for me," says Colin Marston, who runs Menegroth, The Thousand Caves studio in Queens, New York, and plays in Gorguts, Krallice, and Dysrhythmia. This is also a reminder to be sure to record with enough headroom. Once a level clips, it can't be undone. As for common fears about recording too quietly? Marston assures us not to worry, saying, "With 24-bit audio, we have more headroom than you could ever hope to hear, so it's better to shoot a little bit conservatively when it comes to that."
Know Your Tones
Straight from Colin Marston's desktop: an organized session with easy-to-understand labelling.
Some guitarists who record at home are unable to capture the sounds they want. Others are capable of getting their desired tones, but need help taking their project across the finish line. For players in the former camp, Marston recommends reamping. This means the sky's the limit when it comes to guitar tones. And it's a godsend for guitarists seeking the sound of a big, cranked amp, but who can't get that at home.
"The definition of reamping is running anything through another amp," explains Marston. "If I take a signal that's already been miked and run that through an amp again [and record it with a mic, again], it's like a game of telephone: You're gonna get a really blurry, weird signal that no one is used to hearing, because it's being filtered twice through this process that we're only ever used to hearing it filtered through once." Because of this, it may be ideal to plan to reamp your signal from the start, and to perhaps record your original guitar part via DI. "For reamping to sound undetectable, it's gotta be via a DI signal of some variety," Marston adds. "That can be a straight DI or a signal that has been run through a simulator, pedals, or the preamp stage of an amp. Different engineers may have different opinions about which signal they receive."
"With 24-bit audio, we have more headroom than you could ever hope to hear, so it's better to shoot a little bit conservatively." —Colin Marston
Reamping can be a time-consuming process, since the engineer is effectively re-recording your takes, but it all depends on what you are trying to achieve. "That's one of those things you have to estimate at the beginning," Marson says. "Is this time and investment to shorten the overall session or is this going to unnecessarily add time where the tone they've got already is pretty good?"
But it's ideal to just find a sound you love and get it printed. "What's happening now is that people are recording flat: They stick a mic in front of something and they record it and then they shape the sound," says Fridmann. "I don't encourage people to do this. I think it's a much better idea to get a great sound, something with character that fits the tone of the song you're working on, and print it and be done with it and don't go back. I don't want to—and you don't need to—fiddle with plug-ins for six weeks. If you've got a sound you think is cool, print it and move on.
Delivering Your Tracks
Here's a quick check-list to help make your tracks mix-ready:
- Make sure there's no clipping on your track levels
- Label your tracks, clearly and cleanly
- Turn off master channel processing before bouncing tracks to a sharable format
- Send WAV files to avoid audio quality loss
- Use a sample rate and bit depth of at least 44.1kHz/24-bit
- Provide rough mixes with your tracks
- Use zip files or another means to compress files before emailing
"You can leave it up to the mix engineer, but I don't see why you would. From my standpoint, that's a production decision. If you send me a clean guitar that has no processing on it, but you're expecting it to be distorted, we've got way too much to talk about, and I'm trying to mix this song today."
Audio File Hygiene
At the start of every mixing session, Eric Bauer will run a client's rough mixes through his board to help them hear what they can expect from his signal chain.
Most of the engineers we spoke to ask their clients to send them separate synced audio files accompanied by a rough mix. This provides the most flexibility while letting them hear how you're imagining the final recording. Some engineers prefer to have a DAW session as well, so this should be part of any conversation before you get started working together.
If you're bouncing down individual tracks, it's important that you understand exactly what you need to do to make the compiled tracks work. And if you don't, talk to your engineer. Most DAWs make it quite easy to export synced tracks, while others, particularly GarageBand, do not.
"Use minimal mic setups, one or two mics at the most, especially when you're in a practice space." —Eric Bauer
Bauer explains the dangers of bad exporting: "People bring over files and they'll be not synced, not to the same length, so we'll have to sync them up in Pro Tools, which is never completely accurate. I'll have random guitar solos, an overdub of a guitar solo, and I'll have to move it. That's one of the big problems I get."
Whether you're sending separate WAV files or DAW sessions, every track needs to be effectively labeled in a universal way that will help your engineer quickly understand what they're looking at. In an ideal situation, your engineer will spend time mixing and not navigating extensive file names, trying to figure out what's going on with your tracks. That means keep your labels short and clear—Marston offers "GTR U87" as a short label anyone mixing a record would understand—and keep your folders organized.
Second That Emotion
Dave Fridmann encourages home recordists to focus on songwriting and getting cool sounds, and to let mixing engineers worry about the technical details.
When Fridmann mixed Kevin Parker's self-recorded Tame Impala debut, Innerspeaker, Parker flew from Australia to Tarbox Road to mix the album. When they completed the mix, both felt satisfied with the result. But Parker changed his mind upon returning home and flew all the way back to work with Fridmann on a remix. Sure, it was a lot of extra work, and Fridmann says both mixes sounded good, but he agrees that the final version was the better of the two. That just goes to show that there is more than one way to mix a recording. Everyone hears music their own way and the best finished product is what sounds best to the artist … and even that can change. What mixing engineers do is help us hear what is possible and bring that to life.
"If you've got a [Focusrite] Scarlett, an SM57, and Ableton Live, you have so much more in front of you than the Beatles ever dreamed of having." —Dave Fridmann
As artists, we can spend months or years listening to our recordings at home, and anything outside of that can sound surprising. We just need to keep an open mind. While Bauer says that artists often "have it in their mind that those roughs are the one," he has his own strategy to help them hear new possibilities. "At the start of every session, I'll put [the rough mix] up on my board just as they have it, and I'll do a rough mix of their mix running through my two-bus mixing chain. I'll have a bus compressor and a bus EQ, and I'll run their whole mix through that before I start doing anything. Then, we'll start mixing and I'll do it the way I think it should be done. When they leave here, they have three mixes to choose from: their original mix, their mix through my board, and my mix."
Eric Bauer cautions clients to make sure their files are synced correctly.
Fridmann cautions against getting bogged down in the details, because ultimately there's no replacement for good writing and solid playing. "You've gotta have faith in yourself," he says. "No mix engineer is gonna make you say, 'Oh wow, this was mediocre and terrible, but now it's great.' If there's some spark there, if there's something that's musically engaging to you already, then mixing will exemplify that.
"It's not about the technical issues," he continues. "Yes, we have to solve all of these things and maybe somebody hears something weird in some frequency range. Fine—we'll address all that stuff, but that doesn't matter. It doesn't matter when you hear 'Baby Love' and it doesn't matter when you hear 'Back in Black.' Those aren't technical issues that we're listening to—we're listening to emotions and that's what mixing is about to me."
- The Recording Guitarist: DIY Mastering Tools - Premier Guitar ›
- Studio Legends: Alan Parsons on "Dark Side of the Moon" - Premier ... ›
- 10 Recording Mistakes Guitarists Make (And How to Avoid Them ... ›
See and hear Taylor’s Legacy Collection guitars played by his successor, Andy Powers.
Last year, Taylor Guitars capped its 50th Anniversary by introducing a new guitar collection celebrating the contributions of co-founders Bob Taylor and Kurt Listug to the guitar world. The Legacy Collection revives five of Bob Taylor’s classic acoustic models, curated by the legendary luthier and innovator himself. “To imagine that we’re doing guitars that harken to our past, our present and our future all at the same time,” Bob says, “I really like that.”
In developing the collection, Bob preserved the essence of his originals while integrating performance and playability upgrades introduced during his tenure as designer-in-chief. “It’s an up-to-date version of what those guitars would be,” Bob explains, “but with the same sound.”
Visually, these guitars feel classic—clean, understated and unmistakably Taylor. While Bob’s original aesthetic preferences are showcased in his Legacy models, the nod to the past runs deeper than trade dress.
From his earliest builds, Bob favored slim-profile necks because he found them easier to play. That preference set a design precedent that established Taylor’s reputation for smooth-playing, comfortable necks. Legacy models feature slim mahogany necks built with Taylor's patented New Technology (NT) design. “My first neck was a bolted-on neck but not an NT neck,” Bob says. “These are NT necks because it’s a better neck.” Introduced in 1999, the NT neck allowed for unprecedented micro-adjustability while offering a consistent, hand-friendly Taylor playing experience.
What makes this collection unique within the Taylor line is Bob’s use of his X-bracing architecture, favoring his time-tested internal voicing framework over more recent Taylor bracing innovations to evoke a distinctive tone profile. Since Andy Powers—Taylor’s current Chief Guitar Designer, President and CEO—debuted his patented V-Class bracing in 2018, V-Class has become a staple in Taylor’s premium-performance guitars. Still, Bob’s X-bracing pattern produces a richly textured sound with pleasing volume, balance and clarity that long defined the Taylor voice. All Legacy models feature LR Baggs VTC Element electronics, which Bob says “harkens back to those days.”
The team at Taylor thought the best way to demonstrate the sound of the Legacy guitars was to ask Andy Powers, Bob’s successor, to play them. A world-class luthier and musician, Andy has spent the past 14 years leading Taylor’s guitar innovation. In addition to V-Class bracing, his contributions include the Grand Pacific body style, the ultra-refined Builder’s Edition Collection, and most recently, the stunning Gold Label Collection.
Below you’ll find a series of videos that feature Powers playing each Legacy model along with information about the guitars.
Legacy 800 Series Models
First launched in 1975, the 800 Series was Taylor’s first official guitar series. Today, it remains home to some of the brand’s most acclaimed instruments, including the flagship 814ce, Builder’s Edition 814ce and new Gold Label 814e.
The Legacy 800 Series features the 810e Dreadnought and two Jumbos: the 6-string 815e and 12-string 855e. Each model serves up a refined version of the Dreadnought and Jumbo body shapes Bob inherited from Sam Radding—the original owner of the American Dream music shop where Bob and Kurt first met. “I was making my guitars in the molds that Sam had made at American Dream,” Bob recalls. “There was a Jumbo and a Dreadnought. That’s all we had.”
All three Legacy 800 Series guitars feature one of Bob’s favorite tonewood combos. Solid Indian rosewood back and sides are paired with a Sitka spruce top, yielding warm lows, clear trebles and a scooped midrange.
Aesthetic appointments include a three-ring abalone rosette, mother-of-pearl Large Diamond inlays, white binding around the body and fretboard, and Bob’s “straight-ear” peghead design. Both Jumbo models also showcase a mustache-style ebony bridge—a nod to Bob’s early Jumbo builds.
Legacy 810e
The 810 Dreadnought holds a special place in Bob Taylor’s heart. “My first 810, the one I made for myself, was a thrilling guitar for me to make,” he says. “It’s the one and only guitar I played. It didn’t matter how many guitars we made at Taylor, that’s the one I took out and played.” The Legacy 810e brings back that bold, room-filling Dreadnought voice along with the easy playability expected from a Taylor.
Taylor Guitars | Legacy 810e | Playthrough Demo
Legacy 855e
Taylor’s first 12-strings found an audience in 1970s Los Angeles. “I was making guitars that would find their way to McCabe’s in Santa Monica and Westwood Music,” Bob says, “and these guitars were easy to play. Twelve-strings were a popular sound in that music. It was a modern country/folk/rock music genre that was accepting our guitars because they were easy to play. They also liked the sound of them because our guitars were easier to record.” The Legacy 855e, with its resonant Jumbo body, slim neck and gorgeous octave sparkle, carries that tradition forward.
Taylor Guitars | Legacy 855e | Playthrough Demo
Legacy 815e
The Legacy 815e revives Taylor’s original Jumbo 6-string, delivering a big, lush sound with beautifully blooming overtones.
Legacy Grand Auditoriums
In the early 1990s, Bob Taylor heard a consistent refrain from dealers: “Not everybody wants a dreadnought guitar anymore.” Players were asking for something with comparable volume but different proportions—something more comfortable, yet still powerful. This feedback inspired Bob to design a new body style with more elegant curves, more accommodating proportions and a balanced tonal response. The result was the Grand Auditorium, which Taylor introduced in 1994 to celebrate its 20th anniversary.
Thanks to its musical versatility and easy playability, Bob’s Grand Auditorium attracted a wide variety of players. “We came into our own with our Grand Auditorium,” he says. “People were describing it as ‘all around.’ It’s a good strummer and good for fingerstyle, but it’s not totally geared toward strumming or totally geared toward fingerstyle.” Also referred to as the “Swiss-Army Knife” of guitars or the “Goldilocks” guitar, the GA quickly became a favorite among guitarists across playing styles, musical genres and different playing applications including recording and live performance. “That guitar made studio work successful,” Bob says. It gained a wider fanbase with the debut of the “ce” version, which introduced a Venetian cutaway and onboard electronics. “That became one of our hallmarks,” says Bob. “If you want to plug in your guitar, buy a Taylor.”
Today, the Grand Auditorium is Taylor’s best-selling body shape.
The Legacy Collection features two cedar-top Grand Auditoriums inspired by past favorites: the mahogany/cedar 514ce and rosewood/cedar 714ce. Both models incorporate Bob’s original X-bracing pattern for a tonal character reminiscent of their 1990s and 2000s counterparts. Shared aesthetic details include a green abalone three-ring rosette, ebony bridge pins with green abalone dots, a faux-tortoiseshell pickguard and Taylor gold tuning machines.
Taylor Guitars | Legacy 815e | Playthrough Demo
Legacy 514ce
The Legacy 514ce features solid mahogany back and sides paired with a Western Red cedar top, yielding a punchy midrange and dry, woody sonic personality that pairs beautifully with cedar’s soft-touch sensitivity and warmth. It’s a standout choice for fingerstyle players and light strummers who crave nuance and depth. Distinct visual details include faux-tortoise body and fretboard binding, black-and-white top trim, and mother-of-pearl small diamond fretboard inlays.
Taylor Guitars | Legacy 514ce | Playthrough Demo
Legacy 714ce
The Legacy 714ce also features a cedar top, this time matched with solid Indian rosewood back and sides. The result is a richly textured sound with deep lows, clear trebles and a warm, mellow response. Inspiring as it is, this specific wood pairing isn’t currently offered in any other standard Taylor model. Additional aesthetic details include green abalone dot fretboard inlays, black body and fretboard binding, and black-and-white “pinstripe” body purfling.
While the Legacy Collection spotlights Taylor’s past, newer models from the Gold Label, Builder’s Edition and Somos Collections show the company’s legacy is always evolving. Explore the Legacy Collection at taylorguitars.com or visit your local authorized Taylor dealer.
Taylor Guitars | Legacy 714ce | Playthrough Demo
Our columnist’s silver-panel Fender Bandmaster.
How this longstanding, classic tube amp design evolved from its introduction in 1953.
I have a silver-panel Bandmaster Reverb that I don’t think I’ve talked about enough in this column. It’s one of the most versatile and flexible amps I own, so I use it for everything. It’s portable, has tube-driven reverb and tremolo, and has a full set of EQ knobs including the critical bright switch, which we discussed the importance of earlier this year (“How to ‘Trebleshoot’ a Vintage Fender Amp,” March 2025). The amp is not only pedal-friendly; the flexible 4-ohm output impedance will handle almost all speaker configurations and sound any way you’d like. Let’s take a deeper look at the Fender Bandmaster amp and walk through its development through the years.
The first Bandmaster was introduced in 1953 as a wide-panel tweed amp with Fender’s 5C7 circuit. This rare combo was loaded with a single 15" Jensen P15N and powered by dual 6L6GC tubes in push-pull configuration to produce a modest 25 watts. The 6L6GCs were cathode biased and along with the 5U4GB rectifier tube contributed to a forgiving sag, early breakup, and a midrange-y voice.
Fender made several changes when they launched that amp’s successor in 1955, the more widely known 5E7 narrow-panel Bandmaster, a well-proven amp that has come back as a reissue model. It was still a dual-channel amp—instrument and microphone—but the newer 5E7 model had a fixed bias and a negative feedback loop, providing a louder, firmer, and cleaner tone. Most importantly, the single 15" speaker was replaced by three 10" speakers, making it very similar to the narrow-panel tweed Bassman, the granddaddy of all Marshall amps. This Bandmaster had three speakers instead of the Bassman’s four, and it delivered 25–30 watts instead of 40. It offered early breakup with a midrange-y, big and full tone.
For those not acquainted with tweed amps, the volume and EQ knobs behave differently than on silver- and black-panel Fender amps. The volume pot can act like a distortion control, while the EQ knobs control the volume, and many players I’ve talked to have not really unlocked this secret. This works because, in these circuits, the volume pot sits right before the preamp tube, which allows it to push the tube into full distortion. Since the EQ pots are located right after and are capable of reducing the volume, you’re able to distort the preamp at low volume settings.
“Things became more standardized in 1964 with the arrival of the black-panel AB763 Bandmaster, an amp I have worked on a lot and appreciate for its robustness, simplicity, and versatility.”
In 1960, a short-lived and rare Bandmaster dressed in brown tolex and a black faceplate appeared with the 5G7 circuit. From here on, all Bandmasters had the modern top-mounted chassis. With this circuit, the Bandmaster started to both look and sound more like a black-panel amp. It kept the 3x10" speakers but got a diode rectifier and bigger transformers resulting in a 45-watt output. Tremolo was introduced for the first time, and both channels were now intended for guitar.
The following year, a blonde 6G7 Bandmaster followed as a smaller amp head paired with a 1x12 extension cabinet. It had the timeless early blonde looks with cream tolex, brown faceplate, oxblood grill cloth, large Fender logo, and white knobs. But halfway into the blonde era, towards 1964, things turned strange and rather confusing. There were suddenly two 12" speakers, black knobs, a wheat-colored grill cloth, a more slim black-panel-style Fender logo, a black faceplate, and all in various combinations close to the transition into ’64.
Things became more standardized in 1964 with the arrival of the black-panel AB763 Bandmaster, an amp I have worked on a lot and appreciate for its robustness, simplicity, and versatility. It offers a pure, clean, scooped black-panel tone that’s somewhere between a Vibrolux Reverb and Pro Reverb, which share the medium-sized 125A6A output transformer and dual 6L6GC tubes. With its medium/high power and flexible 4-ohm output impedance, it can drive all kinds of speaker cabinets—as long as you stay between 2 and 8 ohms, you are safe.
For a short time in 1967–68, there was a transitional Bandmaster with aluminum trim and black-panel innards before the all-new silver-panel Bandmaster Reverb replaced it in 1968. The small-head cabinet had grown in size and, unfortunately, weight to accommodate the reverb tank. The amp got a 5U4GB rectifier tube along with a few general silver-panel changes to the circuit. Several silver-panel models existed with minor differences until a 70-watt beast version came along in 1977 with master volume.
To my own 1968 Bandmaster Reverb, I have done a few adjustments. First, I made a custom baffle to hold two 8" speakers. I installed a pair of WGS G8C speakers that fit perfectly on the baffle board without colliding with the reverb tank or transformers. Sometimes, I use only one of the 8" speakers for bedroom volume levels. Second, I reversed the bias circuitry to standard AB763 specs, making it easier to adjust bias correctly on both power tubes. If you are into sparkling clean and funky Strat sounds, you would love this little 2x8" combo.Axe-wielders Jake Cinninger and Brendan Bayliss take us through their current gear garages.
It’s been just over 10 years since we had legendary South Bend, Indiana, jam band Umphrey’s McGee on Rig Rundown, so when we saw that they were coming to play at Nashville’s Ryman Auditorium in early April, we figured it was time to reconnect.
Guitarists Jake Cinninger and Brendan Bayliss showed PG’s John Bohlinger what pieces of kit they’re digging these days, and how they orchestrate their incredibly broad range of sounds.
Brought to you by D’Addario.
Simply Z Best
Here’s an up-close look at Cinninger’s No. 1, a G&L Comanche. The Z-coil pickups do away with typical single-coil 60-cycle hum issues at high-gain settings. It’s an all-purpose workhorse.
Cinninger replaced the stock trem bar with a Jake Blade, a custom-made replacement patented by Mark Benjamin of RoughGauge LLC. Compared to a regular trem bar, it’s out of the way and allows for more expressive playing.
For strings, Cinninger uses D’Addario .10s, and he swears by his beveled-edge Telefunken 2 mm picks.
Special S
Cinninger says only 50 of these G&L S-styles were made, with remarkable pieces of wood and specially designed pickups. This one cuts closer to a classic, throaty Stratocaster sound, and if a venue has quiet, clean power that won’t present excessive noise issues, it’s more likely to be called into action.
Two by Two
Cinninger’s signal runs to one amp at a time. The Schroeder head, which is used for cleans, was built with military-spec durability by Tim Schroeder in Chicago and is one of 10. Cinninger says it’s got some Dumble qualities, with its clarity, power, consistency, and speed to the speaker, and it connects to a Schroeder cabinet and custom speaker.
The Oldfield Marquis 100-JC, built by Paul Gussler in Charlotte, North Carolina, is the Marshall-flavored side of Cinninger’s rig. It handles dirty signals and is connected to classic Electro-Voice drivers.
Jake Cinninger’s Pedalboard
Cinninger’s board, which he made with his dad, is 25 years old, and it’s constantly changing. His always-on boxes include a Banzai Cold Fusion Overdrive, Fuchs Royal Plush Compressor, and Mesa Boogie Five-Band Graphic EQ, plus a Steel Guitar Black Box tube buffer that adds some “air” in the high end.
On top of those, there’s a Boss TU-3, MXR Smart Gate, Radial Tonebone Hot British, MXR Distortion III, Sarno Earth Drive, TC Electronic Flashback, Boss PS-5, Source Audio Soundblox 2 Multiwave Distortion, Malekko Fuzz, Guyatone MD2, Boss PH-3, Morley Bad Horsie, BBE Mind Bender, and a custom “FuzzBucket” fuzz made by a friend.
Utility units include a Lily P4D, Radial BigShot ABY, and Ebtech Hum Eliminator, plus a 9-channel effects switching system.
Sorry, Mark
Meet Miss Lucy. This is a PRS Mark Tremonti Signature, albeit without Tremonti’s name on the headstock, and tricked out with the Jake Blade. This one runs a bit hotter than Brendan Bayliss’ other PRS guitars, and his tech changes the strings on it—D’Addario XL .010s—every day. Like Cinninger, he digs the Telefunken 2 mm picks.
Also in the stable are another PRS single-cutaway and a double-cut PRS McCarty.
Doubles of the Oldfield
Bayliss runs both a Mesa Boogie Lonestar head and a Gussler-built Oldfield head (which sounds similar to his Lonestar) at the same time. The Mesa runs to a cab with Celestion 12″ speakers.
Brendan Bayliss’ Board
Bayliss’ board also features the Steel Guitar Black Box, a Lily P4D, Radial BigShot ABY, a Boss TU-3, and a Morley 20/20 Bad Horsie wah.
Aside from those, there’s a Keeley Compressor, MXR Custom Badass Modified O.D., Cusack Screamer, MXR Timmy, Cusack Tap-A-Whirl, Audio Blend Edge EQ, Boss OC-5, Boss CE-5, MXR Phase 95, Eventide H9, Stigtronics Delay, and Boss DD-20.
Guitarist William Tyler, a restless sonic explorer: “I would get bored staying in the same place.”
The expansive instrumental guitarist/composer pushes himself out of his comfort zone, beyond the boundaries of his neo-Americana wheelhouse on Time Indefinite.
Mastering an instrument and an artistic style—and then being recognized and rewarded for it—is a daunting enough accomplishment that one might be forgiven for feeling that, once reached, it’s the be-all to end-all. Guitarist William Tyler, for all the praise and opportunity that have come his way over the past decade and a half, isn’t content to plow the same furrow. With his evolutionary new album, Time Indefinite, this son of the South is pushing further afield, not completely forgoing his virtuosic neo-Americana lyricism but incorporating it into static-friendly, otherworldly studio experimentation.
The disorienting opener of Time Indefinite, “Cabin Six,” begins with a loop of hovering blare that, lasting nearly a minute, might lead listeners to think something is amiss with their turntable stylus; this gradually dissipates into an eddy of railroad-like whine from which a chiming 6-string hook emerges only to finally sink into a murky, detuned drone. The simple, lovely “Anima Motel” and almost naïve “Concern” are eminently approachable, and “Howling at the Second Moon,” with its alternate, Joni Mitchell-inspired tuning, feels like something that could have appeared on one of Tyler’s previous albums (even if it was recorded on his iPhone then texturized via a bump to a cassette recorder and dosed with added effects). But the distressed sonic sculptures of “The Hardest Land to Harvest” and “Electric Lake” or the sampled, distorted church choir laced through “Star of Hope” have a ghostly resonance unlike anything the guitarist has done before.
SoundStream
“I think it’s important for artists to push themselves into new ways of working,” Tyler says. “Most of my favorites, artists I follow over the long trajectory of their careers, have done that, whether it’s in music, film, visual art, novels. Of course, some people have a method or style that they stick to, and it serves them. And I wouldn’t want to put anything out into the world that I wouldn’t myself, as a consumer, enjoy spending time with and taking seriously. That said, I would get bored staying in the same place. The new record is about making something that was a little less chained to certain kinds of guitar music, where I felt like I might be running up against my creative limitations or enthusiasms in that area. I wanted to reinvent myself for myself, to explore fresh possibilities, even with the guitar as my primary tool.”
Tyler, whose parents were hitmaking Nashville songwriters, made his name early on as a young guitar phenom playing in such alternative-minded, country-influenced bands as Lambchop and Silver Jews, before appearing on the fourth volume of the influential Tompkins Square “Imaginational Anthem” series of new-era American Primitive guitar and then making his full-length debut as a solo artist with the 2010 album Behold the Spirit. As a player and composer, he was recognized for subsuming the early influence of John Fahey and the Takoma style into something vibrantly his own.
Tyler keeps his tools simple and his ears open.
Photo by Angelina Castillo
William Tyler’s Gear
Guitars
- Mid-1950s Martin D-18
- 1974 Gibson SG
Pedals
- Hologram Electronics Microcosm
- Strymon El Capistan
- Line 6 DL4 Mark II
Once Tyler signed to the stalwart indie-rock label Merge, the guitarist released a string of warmly received electro-acoustic albums: Impossible Truth (2013), Deseret Canyon (2015) and Modern Country (2016). There was also a marvel of a solo performance at Nashville’s Third Man Records released as an LP in the “Live at Third Man” series. A few years later came the album Goes West, its title alluding to a pre-pandemic move to Los Angeles, and its arrangements flecked with atmospheric swirls and sunny, almost pop-like touches. Tyler also created an aptly rustic score for First Cow, director Kelly Reichardt’s 2019 art house Western, and the guitarist capped his Merge run in 2023 with Secret Stratosphere, a live album of soaring full-band versions of numbers from his back catalog, credited to William Tyler’s Impossible Truth.
“I wanted to reinvent myself for myself, to explore fresh possibilities, even with the guitar as my primary tool.”
Tyler has released covers of such disparate artists as Alex Chilton, Michael Chapman, Fleetwood Mac, Yo La Tengo and Neu!/Harmonia’s Michael Rother, not to mention classical composers Handel and Dvorák. The broad listening palette suggested by these choices always pointed toward a more intrepid path. But the album that most presaged the spirit of Time Indefinite is New Vanitas, a small masterpiece of pandemic creation that found him threading beautiful, involved guitar melodies through hypnagogic soundscapes, often haunted by lo-fi snatches of radio broadcasts and sotto-voce dialogue, as on the evocatively titled “Slow Night’s Static.” New Vanitas even includes a woozy track called “Time Indefinite,” the foreshadowing title a favorite that he borrowed from a film by documentarian Ross McElwee.
On Time Indefinite, Tyler says, “I was drawn to more ambient music, including by guitarists like Christian Fennesz and Norman Westberg, but also groups like Stars of the Lid and Boards of Canada.”
Another signpost on Tyler’s new road was a collaboration with Four Tet’s Kieran Hebden that yielded the folktronica single “Darkness, Darkness.” Then last year brought the standalone track “Flight Final,” Tyler’s first release for the artist-led imprint Psychic Hotline, and a slice of musique concrète that brings to mind Brian Eno’s association with German “kosmische” pioneers Harmonia and Cluster. That recording, the first fruit of an association with collaborator and co-producer Jake Davis, set the stage for their work together on Time Indefinite. Most of the pieces on this album, whether blown-out lullabies or spectral hymns or folk-art abstractions, feel like memories refracted in a dream diary.
“The process of working on this album helped me get better at tempo, just feeling more comfortable playing slower.”
“The new album started out as a series of experiments, without necessarily thinking that they were going to make for a whole record—though, eventually, Jake and I heard a thematic coherence to what we were coming up with,” Tyler explains. “It took a long while to come together, but the roots of the music are in the Covid lockdown. The emotional landscape of that time changed the things I was listening to as well as the music that was coming out of me. I was drawn to more ambient music, including by guitarists like Christian Fennesz and Norman Westberg, but also groups like Stars of the Lid and Boards of Canada. I had gone back to Nashville and was dealing with a problematic mental state. Among other issues, I can tend to approach things too fast, spiritually, emotionally, and physically. Beyond using different recording techniques and learning new ways of creating a piece of music, the process of working on this album helped me get better at tempo, just feeling more comfortable playing slower.”
The guitars Tyler used in the studio for Time Indefinite were his “family heirloom” Martin D-18 and a beloved Gibson SG, both of which are his main live instruments. For effects pedals, he favored a Hologram Electronics Microcosm (“for low-pass filter looping and really weird granular stuff”) and a Strymon El Capistan (“for delays kind of like the old Electro-Harmonix Memory Man”), though Davis also did a lot of processing with an array of his own. One serendipitous piece of gear was a 1959 Webcor Regent reel-to-reel machine deck that Tyler liberated, still new in the box, while helping to clear out his grandfather’s storage space in Mississippi. Davis was inspired to make old-school tape loops with it, including that startling sound that opens the album. Tyler would play arrhythmic, asymmetrical parts that Davis would record and chop up for the loops.
Tyler at this year’s Big Ears Festival with Jake Davis and Cecilia Stair.
Photo by Ross Bustin
Tyler’s recent spate of collaborations, from Davis and Four Tet to pedal-steel guitarist Luke Schneider, “has kept me on my toes, challenged me and recharged me,” he says. “The insularity of being a solo instrumentalist and writing everything by yourself can be freeing at first. And it can be motivating, as when I first started learning how to play fingerstyle guitar, with all the practicing. But I don’t like the isolation of it now. These days, I prefer working with other people. It pushes you into other genres, those different modes of communication.”
Another recent colleague, Marisa Anderson, has credited Tyler for his open, venturesome spirit as a studio partner, with his default attitude of “yes” when they were making their absorbing duo album, Lost Futures. “That was something I really enjoyed about playing with William—he was up for everything,” she said. “I was like, ‘There’s the diving board,’ and he’d say, ‘Let’s go.’”
“These days, I prefer working with other people. It pushes you into other genres, those different modes of communication.”
Tyler is quick to credit artists and albums that have inspired him. Along with the aforementioned players, he namechecks a vast range of others, from Jimmy Page to Jeff Parker, Bill Frisell to Fred Frith, Bruce Langhorne to Nels Cline, William Ackerman to Sandy Bull. Tyler muses about how some of his Nashville session heroes should “have gotten weirder…. I wish Chet Atkins had dropped acid, listened to a Sonny Sharrock LP, and made his own noise record, you know?” Regarding his touchstones for sonic left turns, he points to Wilco’s Yankee Hotel Foxtrot, as well as Talk Talk’s emotive, avant-minded swansongs Spirit of Eden and Laughingstock.
“Those two Talk Talk albums are beyond masterpieces, with some great guitar playing,” Tyler says. “They were in essence made by an artist, Mark Hollis, who did not care about being commercial anymore and certainly not about being able to replicate the stuff live. When Jake and I were recording ‘Howling at the Second Moon,’ that sort of attitude was a reference point, kind of like, ‘Well, instead of trying to get away from the lo-fi weirdness of my original iPhone demo, why don’t we lean into it?’”
Ever thoughtful and candid in conversation, Tyler has been exceptionally transparent about coping with personal loss and midlife crises, as well as going to rehab for the over-indulgence of alcohol. Knowing that, one can hear grief and anxiety in the whorls of Time Indefinite, with the passages of guileless 6-string representing a nostalgia for less complicated times. “It’s a mental landscape record for sure,” he says. “For fans of my previous albums, it might not hit the same way, I realize. But I hope this record says to people that it’s all right to take chances with how you express yourself, with how naked and raw that can be. It has a purposeful arc and is meant to prompt things that aren’t super fashionable in today’s ephemeral, constant-content culture, like deep listening, emotional ambiguity, self-reflection, you know?”YouTube It
This three-song set from last year showcases the expansive cosmic country sound of Tyler and his Impossible Truth band, which includes a Kraftwerk cover.