Here are 16 of our favorite stomp stations from the past year, including Chris Shiflett, Joe Bonamassa, Gary Holt, J Mascis, the Aristocrats’ Bryan Beller, Wolf Van Halen, Shinedown, and more.
The Aristocrats’ Bryan Beller
Photo by Manuela HäuBler
Starting at top right, Bryan Beller’s board has a pair of Xotic EP Boosters to bring up the output of his two passive instruments to match his Lull bass. Next comes a Demeter COMP-1 Opto Compulator that’s always on, followed by a TC Electronic Hall of Fame Reverb, Boss CE-2B Bass Chorus, Boss DD-3 Digital Delay, and a TC Electronic Flashback Delay/Looper. Moving to the bottom left, there’s a Boss OC-2 Octave and an Xotic Bass BB Preamp (Beller’s main overdrive). The Darkglass Electronics Vintage Microtubes and MXR M109S Six Band EQ are used for a beefier, RAT-like sound. Then there’s an EHX Micro POG set to an octave up and an old DigiTech X-Series Bass Driver that pushes the BB Preamp and runs into the Dunlop 105Q Cry Baby Bass Wah pedal (white), giving vocal-like sweeps more definition. Beller also has a Dunlop DVP3 Volume (X) Volume and Expression pedal and a Boss TU-2 Chromatic Tuner. Beller has incorporated the Behringer FCB1010 MIDI controller into his rig so he can provide some “low-rent Geddy Lee” moments in the set via a Roland JV-1010 64-Voice Synth Module.
Beller has incorporated the Behringer FCB1010 MIDI controller into his rig so he can provide some “low-rent Geddy Lee” moments in the set via a Roland JV-1010 64-Voice Synth Module.
Using the Raven Labs MDB-1 Mixer/Direct Box/Buffer for his pedals and running the Roland JV-1010 into his amps allows Beller to employ both his bass and the synth module at the same time.
Rig Rundown: The Aristocrats' Guthrie Govan & Bryan Beller [2022]
Nitty Gritty Dirt Band’s Jeff and Jaime Hanna
Jeff Hanna
Jeff Hanna, who co-founded the Nitty Gritty Dirt Band in 1966, runs his acoustic guitars through a Fishman Aura Spectrum DI and a Boss TU-3 Chromatic Tuner. The electric side of his board includes another Boss TU-3, a Paul Cochrane Tim V3 Overdrive, a Keeley Katana Clean Boost, a J. Rockett GTO, a Keeley-modded Boss TR-2 Tremolo, and a Keeley Mag Echo.
Jaime Hanna
His son Jaime combines acoustic and electric pedals on one board. The acoustic side features a Fishman Aura Spectrum DI, Boss TU-3 Chromatic Tuner, and a Radial JDI direct box as a back-up. For electric, there’s an Ernie Ball volume pedal that feeds a TC Electronic tuner. The main out hits a Mesa/Boogie Stowaway Class-A Input Buffer, a Keeley Compressor, a Paul Cochrane Tim Overdrive, a J. Rockett Archer, an MXR Super Badass Distortion, a Boss GE-7 Equalizer modded by Nashville’s XTS, and a Line 6 M9 Stompbox Modeler Multi-Effects pedal. A Truetone 1 SPOT PRO CS12 provides the juice.
Rig Rundown: The Nitty Gritty Dirt Band’s Jeff and Jaime Hanna
Tetrarch’s Diamond Rowe
Photo by Amy Harris
Shredder Diamond Rowe keeps things succinct. Her stage setup features an always-on Ibanez TS9 Tube Screamer and a DigiTech Whammy for pure fun and note obliterating. A pair of utilitarian Boss stomps—an NS-2 Noise Suppressor and TU-3 Chromatic Tuner—keep her strings clean and accurate. There’s also a Voodoo Lab Pedal Power ISO-5 and Ground Control Pro MIDI Foot Controller.
In a separate rack, Rowe hides her “freak tone” patch. There lurks a Boss RV-6 Reverb, Boss DD-7 Digital Delay, Boss CE-5 Chorus Ensemble, and a MXR Uni-Vibe Chorus/Vibrato, plus a pair of tucked-away MXR Carbon Copy Analog Delays. The rack toys are fired by a Voodoo Lab Pedal Power 2 Plus.
Rig Rundown: Tetrarch's Diamond Rowe & Josh Fore
Marcus King
Roots powerhouse MarcusKing runs his guitar’s cable into a Dunlop Volume (X) 8. Then his signal hits a Dunlop Cry Baby Wah, an MXR Booster, an Ibanez TS9 Tube Screamer, a Tru-Fi Two Face Fuzz, MXR Micro Chorus, Dunlop Rotovibe Chorus/Vibrato, MXR Phase 100, Tru-Fi Ultra Tremolo, Dunlop Echoplex Delay, MXR Reverb, and a Radial Shotgun signal splitter and buffer. Juice? That’s via a Voodoo Lab Pedal Power 3 Plus.
Marcus King's Pedalboard
Foo Fighters’ Chris Shiflett
The mega-rockers’ Chris Shiflett starts his pedalboard with an EHX Micro POG, followed by a JHS Muffuletta, an MXR Flanger and EVH Phase 90, an EHX Holy Grail reverb, a Strymon Deco, and a Klon KTR. The next row sports a Boss CE-2W Waza Craft Chorus, a couple of Strymon TimeLines (one for each amp), and down below is a trio of Xotics—an EP Booster, SP Compressor, and an XW-1 Wah. Utilitarian boxes include a Lehle Little Dual II Amp Switcher, a Palmer PLI-05 Line Isolation Box, a Boss FS-5L Foot Switch (to toggle between clean and dirty on his Friedman Brown Eye), and a TC Electronic PolyTune.
Chris Shiflett's Pedalboard
Mammoth WVH's Wolf Van Halen
Wolf Van Halen brought every EVH pedal (aside from the 5150 Overdrive) for his band’s 2022 tour. The Dunlop EVH95 Cry Baby Wah gets a workout for the solo of “You’ll Be the One.” The MXR EVH 5150 Chorus and the MXR EVH Phase 90 have become interchangeable for him. The MXR EVH117 Flanger gets sprinkled in, and for the solo on “Distance,” he always uses the Boss DD-3 Digital Delay and the EarthQuaker Devices Afterneath. An acoustic DI and tuner consume the rest of the real estate.
Wolf Van Halen's Pedalboard
Full Rig Rundown: https://bit.ly/MammothWVHRRSubscribe to PG's Channel: https://bit.ly/SubscribePGYouTubeMammoth WVH's leader details and demos the series of ...Mammoth WVH’s Ronnie Ficarro
Ronnie Ficarro
Ronnie Ficarro’s bass stomp station hosts a trio of EVH-inspired pedals: an MXR EVH 5150 Chorus, a MXR EVH 5150 Overdrive, and the MXR EVH Phase 90—plus an EHX Pitch Fork for approximating the low B roar that Wolf recorded on the song “Epiphany.” The nondescript silver box is a channel switcher for his Fender Super Bassman, and a Peterson StroboStomp HD does the tuning.
Rig Rundown: Mammoth WVH
El Ten Eleven’s Kristian Dunn
As half of this bass and drums duo, Kristian Dunn used to use three pedalboards, crouching down and manipulating settings all night. Today, he depends primarily on a Line 6 M9 Stompbox Modeler, although it’s two Boomerang III Phrase Samplers that make an El Ten Eleven show happen. In line, they’re separated by the DigiTech Bass Whammy. Dunn routes his signal this way so he can use the Whammy to shift octaves or keys on entire loops in Phrase Sampler one. The second Phrase Sampler, after the Whammy, allows him to pitch-shift specific loops without impacting the whole song or other loops. The Strymon TimeLine conjures precise repeats and specific delay settings not in the M9. The EHX Superego Synth Engine is a secret weapon, for reverse-sound passages. When he holds down the freeze function and plays the next note, it’s not audible until he releases the switch, and then the ongoing audible note blends into the second note. Cool, right? The remaining two pedals are a Nu-X NFB-2 Lacerate FET Boost and a Marshall GV-2 Guv’nor Plus. His tuner: a Boss TU-3 Chromatic. A Custom Audio Electronics RS-T MIDI Foot Controller makes Dunn’s scene changes easier, talking with the M9 and Strymon to alleviate some tap dancing.
Rig Rundown: El Ten Eleven's Kristian Dunn
Shinedown’s Zach Myers
For the Shinedown guitarist, everything starts at the Fractal Audio Axe-Fx IIIs—a main and a backup. There are four channels of Shure UR4D+ wireless units (three for electric and one for acoustic). An AES digital out runs to an Antelope Audio Trinity Master Clock and Antelope Audio 10MX Rubidium Atomic Clock. This helps fatten the fully stereo, digital rig by converting it to analog. After that, IRs off the Axe-Fx (left and right) channel into a pair of Neve DIs that then feed a Fryette G-2502-S Two/Fifty/Two Stereo Power Amplifier. (There’s another for backup.) And finally, parallel signals go to two ISO cabs and two Universal Audio OX Amp Top Box reactive load boxes. Altogether, there are eight channels of guitar.
While tech Drew Foppe handles the racks, Zach still has some control at his toes via a Dunlop MC404 CAE Wah, DigiTech Whammy 5, Ernie Ball 40th Anniversary Volume Pedal, and the Fractal Audio FC-6 Foot Controller. A Voodoo Lab Pedal Power 2 Plus gives life to these pedals.
Rig Rundown: Shinedown's Zach Myers & Eric Bass [2022]
Shinedown's Eric Bass
Eric Bass’ Prestige basses hit the Shure UR4D+ wireless units (similar to Myers, he has three channels for electric and a channel for acoustic), then a Neve DI, and then a Radial JX44 signal manager that feeds into an Ampeg SVT-7 Pro for clean tone (with an extra for backup).
His onstage pedalboard includes a Dunlop 105Q Cry Baby Bass Wah, a DigiTech Bass Whammy, and an MXR M299 Carbon Copy Mini Analog Delay. The ‘Gas’ switch engages a Mojotone Deacon, and a Radial SGI-44 1-channel Studio Guitar Interface connects with his rackmount JX44, while a Boss TU-3W Waza Craft Chromatic Tuner and Voodoo Lab Pedal Power 2 Plus complete the lineup.
Hannah Wicklund
Photo by John VandeMergel
Blueser Hannah Wicklund’s pedalboard is stacked for bruising. Once the signal gets past her MXR Talk Box and Dunlop JC95 Jerry Cantrell Signature Cry Baby, it hits the channel switch for her Orange head. That stays in overdrive mode for about 75 percent of her set, which she says gives her sound its grizzly-bear lows. Next up is a classic—a Boss BD-2 Blues Driver. But this one has a Keeley mod that opens up the low end and keeps mids and highs better defined. The BD-2 gets some atmospheric help via a Dunlop EP103 Echoplex Delay, and the J. Rockett Archer also pairs with the BD-2. There’s an MXR Micro Flanger and an EHX Nano POG, a T. Rex Room-Mate Tube Reverb (on a hall setting), and a Peterson StroboStomp HD, plus an MXR Carbon Copy and a Keeley Rotten Apple OpAmp Fuzz.
Rig Rundown: Hannah Wicklund
Code Orange’s Reba Meyers
Reba Meyers’ tone starts with her signature ESP LTD RM-600 guitar and her 5150 head, but from there her sound is processed via a Fractal Audio Axe-Fx III run through the effects loop of her amp and used to coordinate channel switching. Meyers notes that for some songs she uses it only as a gate, while for others she adds in precise modulation, delay, reverbs, and “noise.” The rest of the rack features a Two-Notes Torpedo Captor X that she uses for cab sims and sending a pure, direct signal to FOH so they can mix that with the SM57 mic on the 4x12s. A Shure GLXD4 Wireless unit keeps her untethered and a RJM Mini Amp Gizmo uses MIDI to switch the amp via the Axe-Fx III.
Her actual board has two always-on pedals: the ISP Decimator II Noise Reduction and the Ibanez TS9 Tube Screamer. They’re joined by a Moog MF Ring Mod, a Boss PS-6 Harmonist, an AMT Electronics WH-1 Japanese Girl Optical Wah, and an Universal Audio Astra Modulation Machine. Everything is controlled by the RJM Mastermind PBC/10.
Reba Meyers' Pedalboard [Code Orange]
Joe Bonamassa
For his 2022 tour, Joe Bonamassa kept his pedalboard stocked with a Way Huge Smalls Overrated Special Overdrive, a Tone Mechanics/Racksystems Loop Box, a Tone Mechanics/Racksystems Splitter, a Fulltone Supa-Trem, a Hughes & Kettner Rotosphere, a Boss DD-2 Digital Delay, an MXR Micro Flanger, an Ibanez TS808 Tube Screamer, an EHX Micro POG, a Dunlop Joe Bonamassa Fuzz Face, a Lehle A/B/C Switcher, a Dunlop Joe Bonamassa Signature Cry Baby Wah in Pelham blue, and an on/off/fast/slow dual switch for his Mesa/Boogie Revolver rotating speaker cabinet. Juice came from a Voodoo Lab Pedal Power 2 Plus.
Joe Bonamassa's "Boomer" Pedalboard
Exodus’ Gary Holt
Thrash-metallurgist Gary Holt trusts most of his switching to his tech, Steve Brogdon, who triggers everything with a rack-mounted Voodoo Lab GCX Guitar Audio Switcher that coordinates with a Voodoo Lab Ground Control Pro MIDI Foot Controller. The pedals in Brogdon’s care include a Boss SD-1 Super Overdrive, Pro Tone Pedals Gary Holt Signature Mid Boost, Maxon OD-9, MXR Bass Octave Deluxe, Maxon FL-9 Flanger, TC Electronic Corona Chorus, Boss NS-2 Noise Suppressor, and a Darta Effects Bonded by Delay. A BBE Supa-Charger provides juice.
Holt still stomps these boxes himself: a Does It Doom Doomsaw, Mooer Tender Octaver, Mooer Green Mile, and a Dunlop JC95SE Jerry Cantrell Special Edition Crybaby Wah. A Shure GLXD16 Digital Wireless Guitar Pedal System lets him rock untethered.
Rig Rundown: Exodus' Gary Holt [2022]
Dinosaur Jr.’s J Mascis
For at least 10-plus years, J Mascis has used a Bob Bradshaw-built Custom Audio Electronics switcher as his mission control. His longtime stomps include a Tone Bender MkI/Rangemaster-clone combo pedal made by Built to Spill’s Jim Roth (bottom right corner), Mascis’ first EHX Ram’s Head Big Muff Pi (top right), a vintage EHX Deluxe Electric Mistress, an MC-FX clone of a Univox Super Fuzz (lower right, blue box), a pair of ZVEX pedals—a Double Rock (two Box of Rock stomps in one) and a Lo-Fi Loop Junky (both bottom left), a Tube Works Real Tube Overdrive, a Moog Minifooger MF Delay, and a Boss TU-3S Tuner. His recently added pedals are a Homebrew Electronics Germania 44 Treble Booster (lower right), a JAM Pedals RetroVibe MkII, an Xotic SL Drive, a Suhr Jack Rabbit Tremolo, a Dr. Scientist Frazz Dazzler fuzz, an EHX Oceans 11, and a Dunlop Jimi Hendrix ’69 Psych Series Uni-Vibe Chorus/Vibrato. Everything receives juice from an MXR MC403 Power System or an MXR M237 DC Brick.
J Mascis' Dinosaur Jr. Pedalboard
Tom Bedell in the Relic Music acoustic room, holding a custom Seed to Song Parlor with a stunning ocean sinker redwood top and milagro Brazilian rosewood back and sides.
A born storyteller, Bedell doesn’t keep his passion to himself. On Friday, May 12, at New Jersey boutique guitar outpost Relic Music, Bedell shared some of the stories he’s collected during his life and travels as part of a three-city clinic trip. At Relic—and stops at Crossroads Guitar and Art in Gilbertsville, Pennsylvania, and Chuck Levin’s Washington Music Center in Wheaton, Maryland—he discussed his guitars and what makes them so special, why sustainability is such an important cause, and how he’s putting it into practice.
Before his talk, we sat in Relic’s cozy, plush acoustic room, surrounded by a host of high-end instruments. We took a look at a few of the store’s house-spec’d Bedell parlors while we chatted.
“The story of this guitar is the story of the world,” Bedell explained to me, holding a Seed to Song Parlor. He painted a picture of a milagro tree growing on a hillside in northeastern Brazil some 500 years ago, deprived of water and growing in stressful conditions during its early life. That tree was eventually harvested, and in the 1950s, it was shipped to Spain by a company that specialized in church ornaments. They recognized this unique specimen and set it aside until it was imported to the U.S. and reached Oregon. Now, it makes the back and sides of this unique guitar.
A Bedell Fireside Parlor with a buckskin redwood top and cocobolo back and sides.
As for the ocean sinker redwood top, “I’m gonna make up the story,” Bedell said, as he approximated the life cycle of the tree, which floated in the ocean, soaking up minerals for years and years, and washed ashore on northern Oregon’s Manzanita Beach. The two woods were paired and built into a small run of exquisitely outfitted guitars using the Bedell/Breedlove Sound Optimization process—in which the building team fine-tunes each instrument’s voice by hand-shaping individual braces to target resonant frequencies using acoustic analysis—and Bedell and his team fell in love.
Playing it while we spoke, I was smitten by this guitar’s warm, responsive tone and even articulation and attack across the fretboard; it strikes a perfect tonal balance between a tight low-end and bright top, with a wide dynamic range that made it sympathetic to anything I offered. And as I swapped guitars, whether picking up a Fireside Parlor with a buckskin redwood top and cocobolo back and sides or one with an Adirondack spruce top and Brazilian rosewood back and sides, the character and the elements of each instrument changed, but that perfect balance remained. Each of these acoustics—and of any Bedell I’ve had the pleasure to play—delivers their own experiential thumbprint.
Rosette and inlay detail on an Adirondack spruce top.
Ultimately, that’s what brought Bedell out to the East Coast on this short tour. “We have a totally different philosophy about how we approach guitar-building,” Bedell effused. “There are a lot of individuals who build maybe 12 guitars a year, who do some of the things that we do, but there’s nobody on a production level.” And he wants to spread that gospel.
“We want to reach people who really want something special,” he continued, pointing out that for the Bedell line, the company specifically wants to work with shops like Relic and the other stores he’s visited, “who have a clientele that says I want the best guitar I can possibly have, and they carry enough variety that we can give them that.”
A Fireside Parlor with a Western red cedar top and Brazilian rosewood back and sides.
The Gibson EH-185, introduced in 1939, was one of the company’s first electric guitars.
It’s hard to overstate the importance of electric guitar in shaping American popular music over the last half-century. Its introduction was a revolution, changing the course of modern musical styles. Today, when we think of the guitars that started the revolution, we think of the Stratocaster and the Les Paul, guitars held against the body and fretted with the fingertips. But the real spark of this musical mutiny was the lap-steel guitar.
In the early 20th century, guitar music was moving out of the parlors of homes and into public spaces where folks could gather together and dance. Guitarists needed to project their sound far beyond where their wimpy little acoustic instruments could reach. Instrument manufacturers began experimenting with larger body sizes, metal construction, and resonators to increase volume.
Around this time, George Beauchamp began experimenting with electric guitar amplification. He settled on a design using two U-shaped magnets and a single coil of wire. Beauchamp was in business with Adolph Rickenbacker, and they decided to stick this new invention into a lap steel.
If we put on our 1930s glasses, this decision makes perfect sense. The most popular music at the time was a blend of Hawaiian and jazz styles made famous by virtuosos like Solomon “Sol” Hoʻopiʻi. Photos of Hoʻopiʻi with a metal-body resonator abound—one can imagine his relief at being handed an instrument that projected sound toward the audience via an amplifier, rather than back at his own head via resonator cones. Beauchamp and Rickenbacker were simply following the market.
As it turned out, the popularity of Hawaiian music gave way to swing, and electric lap steels didn’t exactly take the world by storm. But Beauchamp and Rickenbacker had proven the viability of this new technology, and other manufacturers followed suit. In 1937, Gibson created a pickup with magnets under the strings, rather than above like Beauchamp’s.
“When I plugged in the EH-185 I expected to hear something reminiscent of Charlie Christian’s smooth, clean tone. But what I got was meatier—closer to what I associate with P-90s: warm and midrange-y.”
The first page of Gibson’s “Electrical Instruments” section in the 1939 catalog features a glowing, full-page write-up of their top-of-the-line lap steel: the EH-185. “Everything about this new electric Hawaiian Guitar smacks of good showmanship,” effuses the copy. “It has smoothness, great sustaining power, and an easy flow of tone that builds up strongly and does not die out.”
Picking up the 1940 EH-185 at Fanny’s House of Music is about as close as one can get to traveling back in time to try a new one. It is just so clean, with barely any dings or even finish checking. Overall, this is a 9/10 piece, and it’s a joy to behold. Speaking of picking it up, the first thing you notice when you lift the EH-185 out of the case is its weight. This is a much heavier instrument than other similar-sized lap steels, owing to a length of thick metal between the body and the fretboard. The catalog calls it “Hyblum metal,” which may be a flowery trade name for an early aluminum alloy.
This 1940 EH-185 is heavier than other lap steels in its class, thanks to a length of metal between its fretboard and body.
Photo by Madison Thorn
There are numerous other fancy appointments on the EH-185 that Gibson didn’t offer on their lesser models. It’s made of highly figured maple, with diamond-shaped decorations on the back of the body and neck. The double binding is nearly a centimeter thick and gives the instrument a luxurious, expensive look.
Behind all these high-end attributes is a great-sounding guitar, thanks to that old pickup. It’s got three blades protruding through the bobbin for the unwound strings and one longer blade for the wound strings. When I plugged in the EH-185 I expected to hear something reminiscent of Charlie Christian’s smooth, clean tone. But what I got was meatier—closer to what I associate with P-90s: warm and midrange-y. It was just crying out for a little crunch and a bluesy touch. It’s kind of cool how such a pristine, high-end vintage instrument can be so well-suited for a sound that’s rough around the edges.
As far as electric guitars go, it doesn’t get much more vintage than this 1940 Gibson EH-185 Lap Steel. It reminds us of where the story of the electric guitar truly began. This EH-185 isn’t just a relic—it’s a testament to when the future of music was unfolding in real time. Plug it in, and you become part of the revolution.
Sources: Smithsonian, Vintage Guitar, Mozart Project, Gibson Pre-War, WIRED, Steel Guitar Forum, Vintaxe
