The country and bluegrass power duo show off a selection of their acoustic and electric guitars, which include gems like an original Frying Pan and a 1927 Montgomery Ward acoustic.
Since their debut, Before the Sun Goes Down, in 2014, Rob Ickes and Trey Hensley have made a name for themselves as some of the hottest country and bluegrass players in the business. As individuals, their credits range from Willie Nelson to Earl Scruggs to Merle Haggard—and as a duo, they’ve toured and recorded with artists including Tommy Emmanuel, Taj Mahal, Jorma Kaukonen & Hot Tuna, Luther Dickinson, and Molly Tuttle. It’s likely their forthcoming full-length release, Living in a Song, will only bolster their already impressive reputation.
Out on February 10th, Living in a Song is a new collection of two covers and 10 originals that were inspired by Ickes and Hensley’s life on the road. They collaborated with long-time producer Brent Maher (Merle Haggard, Willie Nelson) along with some award-winning songwriters to compose a total of 40 songs, which were then trimmed down to the resulting selection. That final cut of material leans into a classic country sound, with some Americana and bluegrass thrown in.
Along with the aforementioned credits, Ickes and Hensley have long been established, separately, as formidable musicians. Ickes has been International Bluegrass Music Association Dobro Player of the Year an incredible 15 times, and Hensley made his debut performance at the Grand Ole Opry at just 11 years old. In other words, the two have been around the block, and especially know their way around dobros and flattop acoustics.
Earlier this month, PG’s John Bohlinger met up with the duo at 3Sirens Studio in Nashville, where they played some mind-blowing music, and gave a rundown of some of their favorite guitars and gear.
Click here to pre-save Living in a Song which releases on Friday, Feb. 10.
Brought to you by D’Addario Humidipak.
Mind-Bending Bender
This dreadnought was built for Trey by the Oregon-based Preston Thompson Guitars in 2018. It’s the company’s D-MA model, with sinker mahogany back and sides and an Adirondack spruce top. But what truly makes the guitar special is its StringBender B-bender, which was built into the model by former Byrd and StringBender founder, Gene Parsons, himself. It’s also equipped with an LR Baggs Lyric. As for accessories, Trey uses D’Addario Nickel Bronze .013-.056 strings on all of his guitars, Blue Chip TAD60 picks, a Dunlop Blues Bottle slide, and a D’Addario Rich Robinson slide.
The Guts
Here's a tight shot of the inner mechanisms that engage the B-Bender.
Fighting Spirit
Trey’s favorite guitar is his 1954 Martin D-28. “I’ve had this one for about 20 years now,” he says, “I think I’m the third owner of it.” The first owner wore the neck down so that “it’s real skinny and gets super fat right at the fifth fret.” He brings his D-28 to most of his recording sessions, and while it also has an LR Baggs Lyric, “This guitar does not want to be plugged in at all,” he says, “It just fights back.” It has Brazilian rosewood back and sides; as for the top wood, “Anybody’s guess is as good as mine.”
Ugly Duckling
Found at Fanny’s House of Music in Nashville, this 1965 Harmony Sovereign Deluxe H1265 makes a bit of a statement with its prominent pickguard and mustache bridge. Or, as Trey puts it, “It’s possibly the ugliest guitar I’ve ever seen.” He calls the jumbo-bodied model his “Taj Mahal guitar,” as the bluesman requested it when Trey and Rob joined him for a few performances late last year. “I really like it,” Trey says, smiling, “It’s the guitar that shouldn’t be.”
No. 610
“This is probably one of my other favorites,” Trey says of his 2015 Wayne Henderson dreadnought—the guitar maker’s 610th build. Its specced to a Martin D-18, with mahogany back and sides. The Virginia builder famously built a few models for Eric Clapton, and notoriously has a very, very long wait list—which is why Trey was so afraid to put a pickup in it and take it out on the road after he got it. And then…. “The first night I took it out, it wasn’t on the strap button good, and it fell and hit the concrete floor. This piece here was split,” he says, gesturing to an area on the top plate. Thankfully, he was able to get it repaired. “It sounded really good before I dropped it, but it sounded about a million times better after I dropped it,” he says, “So, the moral of the story is: Drop your guitar.”
Before the War
Another D-18 copy, this 2017 Pre-War Guitars Co. model has mahogany back and sides, and is outfitted with an LR Baggs Anthem SL. It bears Taj Mahal’s signature on the front, and Trey’s on the back. The latter choice was Trey’s way of imitating Earl Scruggs, since he saw Scruggs had done the same to a couple of his instruments when he performed with him as a kid.
Black Dove
Next, a 2022 Gibson Elvis Dove, is “probably the only oddball acoustic I have,” says Trey. “I wasn’t planning on flatpicking on this thing, but I’ve already used it for some sessions.” Its maple back and sides make it the perfect choice to emulate the J-200 he borrowed from his producer for a country record he and Rob just finished recording.
Tried and True
Last in the acoustic queue is Trey’s 2021 Martin D-41. “This one’s been my main guitar for about a year now,” he says. It’s equipped with an LR Baggs Anthem SL, and has a bit of a lower setup compared to his other guitars—but with medium gauge strings, he says, it doesn’t buzz.
Loud and Clear
When Trey isn’t going DI through his LR Baggs Voiceprint, he runs his acoustics through his Fishman Loudbox Artist.
Go-To Gibson
Trey’s go-to electric is his Gibson Custom Shop 1958 Les Paul Reissue VOS, which he got in 2008. He keeps this guitar and his other electrics strung with D’Addario NYXL .010-.046 strings, which can be a bit jarring to his fretting hand when switching over from the .013s on his acoustics. “It takes a minute to not rip the neck off,” he says.
Byrd Build
This 2017 Parsons StringBender T-style was one of Gene Parsons’ early prototypes when he started building guitars.
Headshot For the Headstock
Here's Gene Parsons riding proudly on his 2017 T-style build for Trey Hensley.
To the T
The newest addition to Trey’s electric arsenal is this Berly Guitars Telecaster, built with Rocketfire ’60s-style pickups and “frets basically as big as my Les Paul.”
Trey Hensley’s Pedalboards (Acoustic)
Trey’s acoustic pedalboard is set up with a D’Addario tuner, an EHX Nano Q-Tron Envelope Filter, a Boss CE-2W Waza Craft Chorus, a Boss HM-2W Waza Craft Heavy Metal, a DigiTech Whammy Ricochet, an EarthQuaker Devices Ghost Echo Reverb, a Grace Design Alix preamp, and an LR Baggs Voiceprint. Power comes from a Voodoo Labs Pedal Power 2. It might be a bit unconventional for him to have two DIs, but he says he uses the Alix “for some EQ and mainly a boost; I’m bypassing it as a DI.” And, referring to the Voiceprint, he says, “If I can only take one pedal, it’s going to be that.”
Trey Hensley’s Pedalboards (Electric)
“I’ll preface it by saying, I don’t know what I’m doing,” admits Trey. On his electric pedalboard, he goes into his Dunlop Zakk Wylde Wah, then his D’Addario tuner—“You want that, after the wah,”—then into an EHX Micro Q-Tron, a Keeley Super Phat Mod, a Keeley Sweet Spot Johnny Hiland Super Drive, a JHS PackRat, an EHX J Mascis Ram’s Head Big Muff Pi, a Keeley Dark Side, and an MXR EVH Phase 90.
Ol’ Reliable
Trey has several amps for acoustic and electric. Today he was using a Fender ’68 Custom Princeton Reverb Reissue for his electric.
Bold and Byrly
“When you play a really good dobro, it’s in your face super fast,” says Rob Ickes, describing his main axe, a Byrl Guitars Rob Ickes Signature Series resonator—an instrument distinguished by its half-and-half ebony and curly maple fretboard. It’s equipped with a Fishman Nashville Reso Series pickup, which Ickes says is probably the first pickup that he’s used that’s nearly 100 percent faithful to the dobro sound. He uses D’Addario Nickel Bronze strings, Blue Chip thumb picks, and Bob Perry gold-plated fingerpicks, as well as a Scheerhorn bar slide.
Scheer Invention
This resonator guitar, made by Tim Scheerhorn, has Indian rosewood back and sides and a spruce top. According to Ickes, Scheerhorn “was kind of the Stradivarius of the dobro.” He was the first to start using solid woods—as opposed to the earlier use of plywood—and put sound posts inside the body, like those in a violin. “He also does a little baffle that helps force the sound out of the sound holes,” explains Ickes.
Maple Flames
The second Byrl resonator Ickes shared with us is made from flame maple, giving it that distinctive look, and is actually the first guitar he got from Byrl. He tunes it to an open G chord, which he recently discovered is the original Hawaiian tuning. It has a Beard Legend spun cone made of an aluminum alloy and named after Mike Auldridge.
One Man’s Trash
Ickes found this 1930s dobro at a music store owned by a friend outside of Franklin, Tennessee. It’s made with a stamped cone. “It’s a little bit garbage can, in a good way,” he says, “I’ll use it on sessions if I want a trashier sound.” He normally keeps it in a lower tuning, such as open D.
Family Heirloom
This 1927 Montgomery Ward guitar has a story as intriguing as its sound. It belonged to Ickes’ grandfather, who was a fiddle player: He discovered it one day in the attic of his family home. “This one spoke to me right out of the box,” he shares,” It had that funk—times 10.” It sports signatures from Taj Mahal and Merle Haggard, the latter of whom Ickes recorded a bluegrass album with back in 2006. “I take this to a lot of sessions, in case they need that funky kind of dirt-road sound,” he explains.
Let Slide
“This next one is a more modern version of that,” Ickes says of another model, a Wayne Henderson guitar which he says is the first slide guitar Henderson built. “I just said, ‘Do what you do, but raise the action a bit here at the nut.’” It has a Fishman Nashville Series Reso pickup which Ickes has go into a Fishman Aura Spectrum DI.
A Flash in the Pan
One of the most interesting guitars in Ickes’ collection is his 1932 Rickenbacker Frying Pan, an electric lap steel that was one of the first ever of its kind to be created. “It just cracks me up how they nailed it right out of the box,” he comments. Its single knob is a combination of tone and volume—“As you move to the right, it gets brighter and louder. As you move to the left it gets quieter.”
Silver Surfer
As you can tell, several of the guitars that Ickes brought on this Rig Rundown are from the 1930s, including this Rickenbacker lap steel, nicknamed the “Silver Surfer.” Its mirror-like fretboard made it difficult for Ickes to see the frets when playing live, so he had them covered in red tape, which make them stand out much better.
Black and White
The last of Ickes’ guitars is another 1930s Rickenbacker lap steel, which he fondly refers to as the “Panda,” due to its black-and-white decor. He loves how it sounds, but admits, “This is great if you don’t leave the house [with it],” as it’s very heavy and doesn’t really stay in tune.
Dulcet Dairy Tones
Despite how Ickes typically favors vintage amps, he’s fond of this newer 20-watt Milkman Creamer, which he bought with a lap steel from a friend in California after hearing the two in combination. It has all the vintage vibe without the hassle of old amps.
Li’l Champ
Another amp in Ickes’ collection is his ’50s Fender Champ.
Small Yet Mighty
A third amp that Ickes shared with us is a vintage 1930s Rickenbacker.
Rob Ickes’ Pedalboards (Dobro)
Ickes has two separate pedal boards for his dobro and for his lap steel. Both boards are powered with separate Truetone 1 Spots. He keeps things simple on his dobro board, which includes a Fishman Aura Spectrum DI, an MXR Eddie Van Halen Phase 90, a Walrus Audio Mako Series R1 Reverb, and a ’80s era Boss DM-2 Delay.
Rob Ickes' Lap Steel Pedalboard
The simple setup trend continues with his lap steel pedalboard, which is made up of another four pedals: an EXH Micro Q-Tron, a Keeley Super Phat Mod, an MXR Phase 90, and a Keeley Omni Reverb.
- Rig Rundown: Billy Strings ›
- 8 Licks Tony Rice Loved to Play ›
- Twang 101: Bluegrass Goes Electric! ›
- Rob Ickes & Trey Hensley’s New Songbook - Premier Guitar ›
This legendary vintage rack unit will inspire you to think about effects with a new perspective.
When guitarists think of effects, we usually jump straight to stompboxes—they’re part of the culture! And besides, footswitches have real benefits when your hands are otherwise occupied. But real-time toggling isn’t always important. In the recording studio, where we’re often crafting sounds for each section of a song individually, there’s little reason to avoid rack gear and its possibilities. Enter the iconic Eventide H3000 (and its massive creative potential).
When it debuted in 1987, the H3000 was marketed as an “intelligent pitch-changer” that could generate stereo harmonies in a user-specified key. This was heady stuff in the ’80s! But while diatonic harmonizing grabbed the headlines, subtler uses of this pitch-shifter cemented its legacy. Patch 231 MICROPITCHSHIFT, for example, is a big reason the H3000 persists in racks everywhere. It’s essentially a pair of very short, single-repeat delays: The left side is pitched slightly up while the right side is pitched slightly down (default is ±9 cents). The resulting tripling/thickening effect has long been a mix-engineer staple for pop vocals, and it’s also my first call when I want a stereo chorus for guitar.
The second-gen H3000S, introduced the following year, cemented the device’s guitar bona fides. Early-adopter Steve Vai was such a proponent of the first edition that Eventide asked him to contribute 48 signature sounds for the new model (patches 700-747). Still-later revisions like the H3000B and H3000D/SE added even more functionality, but these days it’s not too important which model you have. Comprehensive EPROM chips containing every patch from all generations of H3000 (plus the later H3500) are readily available for a modest cost, and are a fairly straightforward install.
In addition to pitch-shifting, there are excellent modulation effects and reverbs (like patch 211 CANYON), plus presets inspired by other classic Eventide boxes, like the patch 513 INSTANT PHASER. A comprehensive accounting of the H3000’s capabilities would be tedious, but suffice to say that even the stock presets get deliciously far afield. There are pitch-shifting reverbs that sound like fever-dream ancestors of Strymon’s “shimmer” effect. There are backwards-guitar simulators, multiple extraterrestrial voices, peculiar foreshadows of the EarthQuaker Devices Arpanoid and Rainbow Machine (check out patch 208 BIZARRMONIZER), and even button-triggered Foley effects that require no input signal (including a siren, helicopter, tank, submarine, ocean waves, thunder, and wind). If you’re ever without your deck of Oblique Strategies cards, the H3000’s singular knob makes a pretty good substitute. (Spin the big wheel and find out what you’ve won!)
“If you’re ever without your deck of Oblique Strategies cards, the H3000’s singular knob makes a pretty good substitute.”
But there’s another, more pedestrian reason I tend to reach for the H3000 and its rackmount relatives in the studio: I like to do certain types of processing after the mic. It’s easy to overlook, but guitar speakers are signal processors in their own right. They roll off high and low end, they distort when pushed, and the cabinets in which they’re mounted introduce resonances. While this type of de facto processing often flatters the guitar itself, it isn’t always advantageous for effects.
Effects loops allow time-based effects to be placed after preamp distortion, but I like to go one further. By miking the amp first and then sending signal to effects in parallel, I can get full bandwidth from the airy reverbs and radical pitched-up effects the H3000 can offer—and I can get it in stereo, printed to its own track, allowing the wet/dry balance to be revisited later, if needed. If a sound needs to be reproduced live, that’s a problem for later. (Something evocative enough can usually be extracted from a pedal-form descendant like the Eventide H90.)
Like most vintage gear, the H3000 has some endearing quirks. Even as it knowingly preserves glitches from earlier Eventide harmonizers (patch 217 DUAL H910s), it betrays its age with a few idiosyncrasies of its own. Extreme pitch-shifting exhibits a lot of aliasing (think: bit-crusher sounds), and the analog Murata filter modules impart a hint of warmth that many plug-in versions don’t quite capture. (They also have a habit of leaking black goo all over the motherboard!) It’s all part of the charm of the unit, beloved by its adherents. (Well, maybe not the leaking goo!)
In 2025, many guitarists won’t be eager to care for what is essentially an expensive, cranky, decades-old computer. Even the excitement of occasional tantalum capacitor explosions is unlikely to win them over! Fortunately, some great software emulations exist—Eventide’s own plugin even models the behavior of the Murata filters. But hardware offers the full hands-on experience, so next time you spot an old H3000 in a rack somewhere—and you’ve got the time—fire it up, wait for the distinctive “click” of its relays, spin the knob, and start digging.
The luthier’s stash.
There is more to a guitar than just the details.
A guitar is not simply a collection of wood, wire, and metal—it is an act of faith. Faith that a slab of lumber can be coaxed to sing, and that magnets and copper wire can capture something as expansive as human emotion. While it’s comforting to think that tone can be calculated like a tax return, the truth is far messier. A guitar is a living argument between its components—an uneasy alliance of materials and craftsmanship. When it works, it’s glorious.
The Uncooperative Nature of Wood
For me it all starts with the wood. Not just the species, but the piece. Despite what spec sheets and tonewood debates would have you believe, no two boards are the same. One piece of ash might have a bright, airy ring, while another from the same tree might sound like it spent a hard winter in a muddy ditch.
Builders know this, which is why you’ll occasionally catch one tapping on a rough blank, head cocked like a bird listening. They’re not crazy. They’re hunting for a lively, responsive quality that makes the wood feel awake in your hands. But wood is less than half the battle. So many guitarists make the mistake of buying the lumber instead of the luthier.
Pickups: Magnetic Hopes and Dreams
The engine of the guitar, pickups are the part that allegedly defines the electric guitar’s voice. Sure, swapping pickups will alter the tonality, to use a color metaphor, but they can only translate what’s already there, and there’s little percentage in trying to wake the dead. Yet, pickups do matter. A PAF-style might offer more harmonic complexity, or an overwound single-coil may bring some extra snarl, but here’s the thing: Two pickups made to the same specs can still sound different. The wire tension, the winding pattern, or even the temperature on the assembly line that day all add tiny variables that the spec sheet doesn’t mention. Don’t even get me started about the unrepeatability of “hand-scatter winding,” unless you’re a compulsive gambler.
“One piece of ash might have a bright, airy ring, while another from the same tree might sound like it spent a hard winter in a muddy ditch.”
Wires, Caps, and Wishful Thinking
Inside the control cavity, the pots and capacitors await, quietly shaping your tone whether you notice them or not. A potentiometer swap can make your volume taper feel like an on/off switch or smooth as an aged Tennessee whiskey. A capacitor change can make or break the tone control’s usefulness. It’s subtle, but noticeable. The kind of detail that sends people down the rabbit hole of swapping $3 capacitors for $50 “vintage-spec” caps, just to see if they can “feel” the mojo of the 1950s.
Hardware: The Unsung Saboteur
Bridges, nuts, tuners, and tailpieces are occasionally credited for their sonic contributions, but they’re quietly running the show. A steel block reflects and resonates differently than a die-cast zinc or aluminum bridge. Sloppy threads on bridge studs can weigh in, just as plate-style bridges can couple firmly to the body. Tuning machines can influence not just tuning stability, but their weight can alter the way the headstock itself vibrates.
It’s All Connected
Then there’s the neck joint—the place where sustain goes to die. A tight neck pocket allows the energy to transfer efficiently. A sloppy fit? Some credit it for creating the infamous cluck and twang of Fender guitars, so pick your poison. One of the most important specs is scale length. A longer scale not only creates more string tension, it also requires the frets to be further apart. This changes the feel and the sound. A shorter scale seems to diminish bright overtones, accentuating the lows and mids. Scale length has a definite effect on where the neck joins the body and the position of the bridge, where compromises must be made in a guitar’s overall design. There are so many choices, and just as many opportunities to miss the mark. It’s like driving without a map unless you’ve been there before.
Alchemy, Not Arithmetic
At the end of the day, a guitar’s greatness doesn’t come from its spec sheet. It’s not about the wood species or the coil-wire gauge. It’s about how it all conspires to either soar or sink. Two guitars, built to identical specs, can feel like long-lost soulmates or total strangers. All of these factors are why mix-and-match mods are a long game that can eventually pay off. But that’s the mystery of it. You can’t build magic from a parts list. You can’t buy mojo by the pound. A guitar is more than the sum of its parts—it’s a sometimes unpredictable collaboration of materials, choices, and human touch. And sometimes, whether in the hands of an experienced builder or a dedicated tinkerer, it just works.
Two Iconic Titans of Rock & Metal Join Forces for a Can’t-Miss North American Trek
Tickets Available Starting Wednesday, April 16 with Artist Presales
General On Sale Begins Friday, April 18 at 10AM Local on LiveNation.com
This fall, shock rock legend Alice Cooper and heavy metal trailblazers Judas Priest will share the stage for an epic co-headlining tour across North America. Produced by Live Nation, the 22-city run kicks off September 16 at Mississippi Coast Coliseum in Biloxi, MS, and stops in Toronto, Phoenix, Los Angeles, and more before wrapping October 26 at The Cynthia Woods Mitchell Pavilion in The Woodlands, TX.
Coming off the second leg of their Invincible Shield Tour and the release of their celebrated 19th studio album, Judas Priest remains a dominant force in metal. Meanwhile, Alice Cooper, the godfather of theatrical rock, wraps up his "Too Close For Comfort" tour this summer, promoting his most recent "Road" album, and will have an as-yet-unnamed all-new show for this tour. Corrosion of Conformity will join as support on select dates.
Tickets will be available starting Wednesday, April 16 at 10AM local time with Artist Presales. Additional presales will run throughout the week ahead of the general onsale beginning Friday, April 18 at 10AM local time at LiveNation.comTOUR DATES:
Tue Sep 16 – Biloxi, MS – Mississippi Coast Coliseum
Thu Sep 18 – Alpharetta, GA – Ameris Bank Amphitheatre*
Sat Sep 20 – Charlotte, NC – PNC Music Pavilion
Sun Sep 21 – Franklin, TN – FirstBank Amphitheater
Wed Sep 24 – Virginia Beach, VA – Veterans United Home Loans Amphitheater
Fri Sep 26 – Holmdel, NJ – PNC Bank Arts Center
Sat Sep 27 – Saratoga Springs, NY – Broadview Stage at SPAC
Mon Sep 29 – Toronto, ON – Budweiser Stage
Wed Oct 01 – Burgettstown, PA – The Pavilion at Star Lake
Thu Oct 02 – Clarkston, MI – Pine Knob Music Theatre
Sat Oct 04 – Cincinnati, OH – Riverbend Music Center
Sun Oct 05 – Tinley Park, IL – Credit Union 1 Amphitheatre
Fri Oct 10 – Colorado Springs, CO – Broadmoor World Arena
Sun Oct 12 – Salt Lake City, UT – Utah First Credit Union Amphitheatre
Tue Oct 14 – Mountain View, CA – Shoreline Amphitheatre
Wed Oct 15 – Wheatland, CA – Toyota Amphitheatre
Sat Oct 18 – Chula Vista, CA – North Island Credit Union Amphitheatre
Sun Oct 19 – Los Angeles, CA – Kia Forum
Wed Oct 22 – Phoenix, AZ – Talking Stick Resort Amphitheatre
Thu Oct 23 – Albuquerque, NM – Isleta Amphitheater
Sat Oct 25 – Austin, TX – Germania Insurance Amphitheater
Sun Oct 26 – Houston, TX – The Cynthia Woods Mitchell Pavilion
*Without support from Corrosion of Conformity
MT 15 and Archon 50 Classic amplifiers offer fresh tones in release alongside a doubled-in-size Archon cabinet
PRS Guitars today released the updated MT 15 and the new Archon Classic amplifiers, along with a larger Archon speaker cabinet. The 15-watt, two-channel Mark Tremonti signature amp MT 15 now features a lead channel overdrive control. An addition to the Archon series, not a replacement, the 50-watt Classic offers a fresh voice by producing retro rock “classic” tones reminiscent of sound permeating the radio four and five decades ago. Now twice the size of the first Archon cabinet, the Archon 4x12 boasts four Celestion V-Type speakers.
MT 15 Amplifier Head
Balancing aggression and articulation, this 15-watt amp supplies both heavy rhythms and clear lead tones. The MT 15 revision builds off the design of the MT 100, bringing the voice of the 100’s overdrive channel into its smaller-format sibling. Updating the model, the lead channel also features a push/pull overdrive control that removes two gain stages to produce vintage, crunchier “mid gain” tones. The clean channel still features a push/pull boost control that adds a touch of overdrive crunch. A half-power switch takes the MT to 7 watts.
“Seven years ago, we released my signature MT 15 amplifier, a compact powerhouse that quickly became a go-to for players seeking both pristine cleans and crushing high-gain tones. In 2023, we took things even further with the MT 100, delivering a full-scale amplifier that carried my signature sound to the next level. That inspired us to find a way to fit the 100's third channel into the 15's lunchbox size,” said Mark Tremonti.
“Today, I’m beyond excited to introduce the next evolution of the MT15, now featuring a push/pull overdrive control on the Lead channel and a half-power switch, giving players even more tonal flexibility to shape their sound with a compact amp. Can’t wait for you all to plug in and experience it!”
Archon Classic Amplifier Head
With a refined gain structure from the original Archon, the Archon Classic’s lead channel offers a wider range of tones colored with gain, especially in the midrange. The clean channel goes from pristine all the way to the edge of breakup. This additional Archon version was developed to be a go-to tool for playing classic rock or pushing the envelope into modern territory. The Archon Classic still features the original’s bright switch, presence and depth controls. PRS continues to stock the Archon in retailers worldwide.
“The Archon Classic is not a re-issue of the original Archon, but a newly voiced circuit with the lead channel excelling in '70s and '80s rock tones and a hotter clean channel able to go into breakup. This is the answer for those wanting an Archon with a hotrod vintage lead channel gain structure without changing preamp tube types, and a juiced- up clean channel without having to use a boost pedal, all wrapped up in a retro-inspired cabinet design,” said PRS Amp Designer Doug Sewell.
Archon 4x12 Cabinet
As in the Archon 1x12 and 2x12, the mega-sized PRS Archon 4x12 speaker cabinet features Celestion V-Type speakers and a closed-back design, delivering power, punch, and tight low end. Also like its smaller brethren, the 4x12 is wrapped in durable black vinyl and adorned with a British-style black knitted-weave grill cloth. The Archon 4x12 is only the second four-speaker cabinet in the PRS lineup, next to the HDRX 4x12.
PRS Guitars continues its schedule of launching new products each month in 2025. Stay tuned to see new gear and 40 th Anniversary limited-edition guitars throughout the year. For all of the latest news, click www.prsguitars.com/40 and follow @prsguitars on Instagram, Tik Tok, Facebook, X, and YouTube.