Here are 16 of our favorite stomp stations from the past year, including Chris Shiflett, Joe Bonamassa, Gary Holt, J Mascis, the Aristocrats’ Bryan Beller, Wolf Van Halen, Shinedown, and more.
The Aristocrats’ Bryan Beller
Photo by Manuela HäuBler
Starting at top right, Bryan Beller’s board has a pair of Xotic EP Boosters to bring up the output of his two passive instruments to match his Lull bass. Next comes a Demeter COMP-1 Opto Compulator that’s always on, followed by a TC Electronic Hall of Fame Reverb, Boss CE-2B Bass Chorus, Boss DD-3 Digital Delay, and a TC Electronic Flashback Delay/Looper. Moving to the bottom left, there’s a Boss OC-2 Octave and an Xotic Bass BB Preamp (Beller’s main overdrive). The Darkglass Electronics Vintage Microtubes and MXR M109S Six Band EQ are used for a beefier, RAT-like sound. Then there’s an EHX Micro POG set to an octave up and an old DigiTech X-Series Bass Driver that pushes the BB Preamp and runs into the Dunlop 105Q Cry Baby Bass Wah pedal (white), giving vocal-like sweeps more definition. Beller also has a Dunlop DVP3 Volume (X) Volume and Expression pedal and a Boss TU-2 Chromatic Tuner. Beller has incorporated the Behringer FCB1010 MIDI controller into his rig so he can provide some “low-rent Geddy Lee” moments in the set via a Roland JV-1010 64-Voice Synth Module.
Beller has incorporated the Behringer FCB1010 MIDI controller into his rig so he can provide some “low-rent Geddy Lee” moments in the set via a Roland JV-1010 64-Voice Synth Module.
Using the Raven Labs MDB-1 Mixer/Direct Box/Buffer for his pedals and running the Roland JV-1010 into his amps allows Beller to employ both his bass and the synth module at the same time.
Rig Rundown: The Aristocrats' Guthrie Govan & Bryan Beller [2022]
Nitty Gritty Dirt Band’s Jeff and Jaime Hanna
Jeff Hanna
Jeff Hanna, who co-founded the Nitty Gritty Dirt Band in 1966, runs his acoustic guitars through a Fishman Aura Spectrum DI and a Boss TU-3 Chromatic Tuner. The electric side of his board includes another Boss TU-3, a Paul Cochrane Tim V3 Overdrive, a Keeley Katana Clean Boost, a J. Rockett GTO, a Keeley-modded Boss TR-2 Tremolo, and a Keeley Mag Echo.
Jaime Hanna
His son Jaime combines acoustic and electric pedals on one board. The acoustic side features a Fishman Aura Spectrum DI, Boss TU-3 Chromatic Tuner, and a Radial JDI direct box as a back-up. For electric, there’s an Ernie Ball volume pedal that feeds a TC Electronic tuner. The main out hits a Mesa/Boogie Stowaway Class-A Input Buffer, a Keeley Compressor, a Paul Cochrane Tim Overdrive, a J. Rockett Archer, an MXR Super Badass Distortion, a Boss GE-7 Equalizer modded by Nashville’s XTS, and a Line 6 M9 Stompbox Modeler Multi-Effects pedal. A Truetone 1 SPOT PRO CS12 provides the juice.
Rig Rundown: The Nitty Gritty Dirt Band’s Jeff and Jaime Hanna
Tetrarch’s Diamond Rowe
Photo by Amy Harris
Shredder Diamond Rowe keeps things succinct. Her stage setup features an always-on Ibanez TS9 Tube Screamer and a DigiTech Whammy for pure fun and note obliterating. A pair of utilitarian Boss stomps—an NS-2 Noise Suppressor and TU-3 Chromatic Tuner—keep her strings clean and accurate. There’s also a Voodoo Lab Pedal Power ISO-5 and Ground Control Pro MIDI Foot Controller.
In a separate rack, Rowe hides her “freak tone” patch. There lurks a Boss RV-6 Reverb, Boss DD-7 Digital Delay, Boss CE-5 Chorus Ensemble, and a MXR Uni-Vibe Chorus/Vibrato, plus a pair of tucked-away MXR Carbon Copy Analog Delays. The rack toys are fired by a Voodoo Lab Pedal Power 2 Plus.
Rig Rundown: Tetrarch's Diamond Rowe & Josh Fore
Marcus King
Roots powerhouse MarcusKing runs his guitar’s cable into a Dunlop Volume (X) 8. Then his signal hits a Dunlop Cry Baby Wah, an MXR Booster, an Ibanez TS9 Tube Screamer, a Tru-Fi Two Face Fuzz, MXR Micro Chorus, Dunlop Rotovibe Chorus/Vibrato, MXR Phase 100, Tru-Fi Ultra Tremolo, Dunlop Echoplex Delay, MXR Reverb, and a Radial Shotgun signal splitter and buffer. Juice? That’s via a Voodoo Lab Pedal Power 3 Plus.
Marcus King's Pedalboard
Foo Fighters’ Chris Shiflett
The mega-rockers’ Chris Shiflett starts his pedalboard with an EHX Micro POG, followed by a JHS Muffuletta, an MXR Flanger and EVH Phase 90, an EHX Holy Grail reverb, a Strymon Deco, and a Klon KTR. The next row sports a Boss CE-2W Waza Craft Chorus, a couple of Strymon TimeLines (one for each amp), and down below is a trio of Xotics—an EP Booster, SP Compressor, and an XW-1 Wah. Utilitarian boxes include a Lehle Little Dual II Amp Switcher, a Palmer PLI-05 Line Isolation Box, a Boss FS-5L Foot Switch (to toggle between clean and dirty on his Friedman Brown Eye), and a TC Electronic PolyTune.
Chris Shiflett's Pedalboard
Mammoth WVH's Wolf Van Halen
Wolf Van Halen brought every EVH pedal (aside from the 5150 Overdrive) for his band’s 2022 tour. The Dunlop EVH95 Cry Baby Wah gets a workout for the solo of “You’ll Be the One.” The MXR EVH 5150 Chorus and the MXR EVH Phase 90 have become interchangeable for him. The MXR EVH117 Flanger gets sprinkled in, and for the solo on “Distance,” he always uses the Boss DD-3 Digital Delay and the EarthQuaker Devices Afterneath. An acoustic DI and tuner consume the rest of the real estate.
Wolf Van Halen's Pedalboard
Full Rig Rundown: https://bit.ly/MammothWVHRRSubscribe to PG's Channel: https://bit.ly/SubscribePGYouTubeMammoth WVH's leader details and demos the series of ...Mammoth WVH’s Ronnie Ficarro
Ronnie Ficarro
Ronnie Ficarro’s bass stomp station hosts a trio of EVH-inspired pedals: an MXR EVH 5150 Chorus, a MXR EVH 5150 Overdrive, and the MXR EVH Phase 90—plus an EHX Pitch Fork for approximating the low B roar that Wolf recorded on the song “Epiphany.” The nondescript silver box is a channel switcher for his Fender Super Bassman, and a Peterson StroboStomp HD does the tuning.
Rig Rundown: Mammoth WVH
El Ten Eleven’s Kristian Dunn
As half of this bass and drums duo, Kristian Dunn used to use three pedalboards, crouching down and manipulating settings all night. Today, he depends primarily on a Line 6 M9 Stompbox Modeler, although it’s two Boomerang III Phrase Samplers that make an El Ten Eleven show happen. In line, they’re separated by the DigiTech Bass Whammy. Dunn routes his signal this way so he can use the Whammy to shift octaves or keys on entire loops in Phrase Sampler one. The second Phrase Sampler, after the Whammy, allows him to pitch-shift specific loops without impacting the whole song or other loops. The Strymon TimeLine conjures precise repeats and specific delay settings not in the M9. The EHX Superego Synth Engine is a secret weapon, for reverse-sound passages. When he holds down the freeze function and plays the next note, it’s not audible until he releases the switch, and then the ongoing audible note blends into the second note. Cool, right? The remaining two pedals are a Nu-X NFB-2 Lacerate FET Boost and a Marshall GV-2 Guv’nor Plus. His tuner: a Boss TU-3 Chromatic. A Custom Audio Electronics RS-T MIDI Foot Controller makes Dunn’s scene changes easier, talking with the M9 and Strymon to alleviate some tap dancing.
Rig Rundown: El Ten Eleven's Kristian Dunn
Shinedown’s Zach Myers
For the Shinedown guitarist, everything starts at the Fractal Audio Axe-Fx IIIs—a main and a backup. There are four channels of Shure UR4D+ wireless units (three for electric and one for acoustic). An AES digital out runs to an Antelope Audio Trinity Master Clock and Antelope Audio 10MX Rubidium Atomic Clock. This helps fatten the fully stereo, digital rig by converting it to analog. After that, IRs off the Axe-Fx (left and right) channel into a pair of Neve DIs that then feed a Fryette G-2502-S Two/Fifty/Two Stereo Power Amplifier. (There’s another for backup.) And finally, parallel signals go to two ISO cabs and two Universal Audio OX Amp Top Box reactive load boxes. Altogether, there are eight channels of guitar.
While tech Drew Foppe handles the racks, Zach still has some control at his toes via a Dunlop MC404 CAE Wah, DigiTech Whammy 5, Ernie Ball 40th Anniversary Volume Pedal, and the Fractal Audio FC-6 Foot Controller. A Voodoo Lab Pedal Power 2 Plus gives life to these pedals.
Rig Rundown: Shinedown's Zach Myers & Eric Bass [2022]
Shinedown's Eric Bass
Eric Bass’ Prestige basses hit the Shure UR4D+ wireless units (similar to Myers, he has three channels for electric and a channel for acoustic), then a Neve DI, and then a Radial JX44 signal manager that feeds into an Ampeg SVT-7 Pro for clean tone (with an extra for backup).
His onstage pedalboard includes a Dunlop 105Q Cry Baby Bass Wah, a DigiTech Bass Whammy, and an MXR M299 Carbon Copy Mini Analog Delay. The ‘Gas’ switch engages a Mojotone Deacon, and a Radial SGI-44 1-channel Studio Guitar Interface connects with his rackmount JX44, while a Boss TU-3W Waza Craft Chromatic Tuner and Voodoo Lab Pedal Power 2 Plus complete the lineup.
Hannah Wicklund
Photo by John VandeMergel
Blueser Hannah Wicklund’s pedalboard is stacked for bruising. Once the signal gets past her MXR Talk Box and Dunlop JC95 Jerry Cantrell Signature Cry Baby, it hits the channel switch for her Orange head. That stays in overdrive mode for about 75 percent of her set, which she says gives her sound its grizzly-bear lows. Next up is a classic—a Boss BD-2 Blues Driver. But this one has a Keeley mod that opens up the low end and keeps mids and highs better defined. The BD-2 gets some atmospheric help via a Dunlop EP103 Echoplex Delay, and the J. Rockett Archer also pairs with the BD-2. There’s an MXR Micro Flanger and an EHX Nano POG, a T. Rex Room-Mate Tube Reverb (on a hall setting), and a Peterson StroboStomp HD, plus an MXR Carbon Copy and a Keeley Rotten Apple OpAmp Fuzz.
Rig Rundown: Hannah Wicklund
Code Orange’s Reba Meyers
Reba Meyers’ tone starts with her signature ESP LTD RM-600 guitar and her 5150 head, but from there her sound is processed via a Fractal Audio Axe-Fx III run through the effects loop of her amp and used to coordinate channel switching. Meyers notes that for some songs she uses it only as a gate, while for others she adds in precise modulation, delay, reverbs, and “noise.” The rest of the rack features a Two-Notes Torpedo Captor X that she uses for cab sims and sending a pure, direct signal to FOH so they can mix that with the SM57 mic on the 4x12s. A Shure GLXD4 Wireless unit keeps her untethered and a RJM Mini Amp Gizmo uses MIDI to switch the amp via the Axe-Fx III.
Her actual board has two always-on pedals: the ISP Decimator II Noise Reduction and the Ibanez TS9 Tube Screamer. They’re joined by a Moog MF Ring Mod, a Boss PS-6 Harmonist, an AMT Electronics WH-1 Japanese Girl Optical Wah, and an Universal Audio Astra Modulation Machine. Everything is controlled by the RJM Mastermind PBC/10.
Reba Meyers' Pedalboard [Code Orange]
Joe Bonamassa
For his 2022 tour, Joe Bonamassa kept his pedalboard stocked with a Way Huge Smalls Overrated Special Overdrive, a Tone Mechanics/Racksystems Loop Box, a Tone Mechanics/Racksystems Splitter, a Fulltone Supa-Trem, a Hughes & Kettner Rotosphere, a Boss DD-2 Digital Delay, an MXR Micro Flanger, an Ibanez TS808 Tube Screamer, an EHX Micro POG, a Dunlop Joe Bonamassa Fuzz Face, a Lehle A/B/C Switcher, a Dunlop Joe Bonamassa Signature Cry Baby Wah in Pelham blue, and an on/off/fast/slow dual switch for his Mesa/Boogie Revolver rotating speaker cabinet. Juice came from a Voodoo Lab Pedal Power 2 Plus.
Joe Bonamassa's "Boomer" Pedalboard
Exodus’ Gary Holt
Thrash-metallurgist Gary Holt trusts most of his switching to his tech, Steve Brogdon, who triggers everything with a rack-mounted Voodoo Lab GCX Guitar Audio Switcher that coordinates with a Voodoo Lab Ground Control Pro MIDI Foot Controller. The pedals in Brogdon’s care include a Boss SD-1 Super Overdrive, Pro Tone Pedals Gary Holt Signature Mid Boost, Maxon OD-9, MXR Bass Octave Deluxe, Maxon FL-9 Flanger, TC Electronic Corona Chorus, Boss NS-2 Noise Suppressor, and a Darta Effects Bonded by Delay. A BBE Supa-Charger provides juice.
Holt still stomps these boxes himself: a Does It Doom Doomsaw, Mooer Tender Octaver, Mooer Green Mile, and a Dunlop JC95SE Jerry Cantrell Special Edition Crybaby Wah. A Shure GLXD16 Digital Wireless Guitar Pedal System lets him rock untethered.
Rig Rundown: Exodus' Gary Holt [2022]
Dinosaur Jr.’s J Mascis
For at least 10-plus years, J Mascis has used a Bob Bradshaw-built Custom Audio Electronics switcher as his mission control. His longtime stomps include a Tone Bender MkI/Rangemaster-clone combo pedal made by Built to Spill’s Jim Roth (bottom right corner), Mascis’ first EHX Ram’s Head Big Muff Pi (top right), a vintage EHX Deluxe Electric Mistress, an MC-FX clone of a Univox Super Fuzz (lower right, blue box), a pair of ZVEX pedals—a Double Rock (two Box of Rock stomps in one) and a Lo-Fi Loop Junky (both bottom left), a Tube Works Real Tube Overdrive, a Moog Minifooger MF Delay, and a Boss TU-3S Tuner. His recently added pedals are a Homebrew Electronics Germania 44 Treble Booster (lower right), a JAM Pedals RetroVibe MkII, an Xotic SL Drive, a Suhr Jack Rabbit Tremolo, a Dr. Scientist Frazz Dazzler fuzz, an EHX Oceans 11, and a Dunlop Jimi Hendrix ’69 Psych Series Uni-Vibe Chorus/Vibrato. Everything receives juice from an MXR MC403 Power System or an MXR M237 DC Brick.
J Mascis' Dinosaur Jr. Pedalboard
The pedals keep coming! Enter Stompboxtober Day 28 for your chance to win today’s featured pedal from Line 6!
Line 6 Hx One Stereo Multi-Effects Pedal
The Line 6 HX One is a powerful stereo effect pedal with intuitive controls that fits onto any pedalboard. Select one of 250+ effects taken from the acclaimed HX family processors and easily adjust the parameters displayed on the OLED screen using the three corresponding knobs. You can also automate parameter changes via the unique Flux controller and trigger them with the Tap/Flux footswitch. Connect an optional expression pedal or two external footswitches for additional control (all sold separately). . HX One also provides adjustable input impedance with a choice of True Bypass or buffered DSP Bypass, MIDI In and Out/Thru connectors, 128 Presets or a USB-C port for firmware updates and use with the HX One Preset Librarian application. HX One may be powered using the included 9V power supply or most third-party power supplies, making it easy to add to your pedalboard.250+ effects taken from the HX family processors. Intuitive controls make selecting and editing effects easy. Flux Controller for automating parameter changes . Adjustable input impedance to match your instrument . Connect an optional expression pedal or two external footswitches (sold separately). MIDI In, Out/Thru connectors (receives PC and CC messages). Stereo I/O with choice of True Bypass or buffered DSP Bypass. 128 preset slots. USB-C port for firmware updates and use with HX One Preset Librarian . 9V power supply included.PG contributor Tom Butwin details RAB Audio GSRS – a studio racking system purpose-built for guitarists looking to declutter, customize, and elevate their creative space. Whether you’re a pedal enthusiast or amp collector, RAB Audio has a solution for your recording setup.
RAB Audio ProRak SRS1 Guitar Studio Racking System
3 adj amp head decks, laminated plywood, Blk TrimHandcrafted in the USA, the JEL-50 features 50 watts of all-tube power, two channels, and a transparent effects loop. The JEL-212 Cab is loaded with Celestion Creamback speakers.
Jake E. Lee ranks high on the shortlist of influential gunslinger guitarists that emerged as the heroes of a new generation in the early ‘80s. Best known for the burning guitar work and innovative songwriting, Lee contributed to two of Ozzy Osbourne's most revered albums, 1983’s Bark at the Moon and 1986’s Ultimate Sin.
With Ozzy, his post-Ozzy band, Badlands and most recently, with his own group, Red Dragon Cartel, Lee’s playing embraced the athleticism of the ‘80s while remaining firmly rooted in the hard rock fundamentals of the ‘70s. Jake’s tonal choices provide the evolutionary glue between the sonics of those two great eras. Jake E Lee and Dave Friedman combined their legendary ears and talents to create the new Friedman JEL-50, a signature amplifier that offers Lee’s ultimate tones in a boutique hand-wired package.
In Lee’s own words, “this amp puts the two specific tones I use to create my sound in one head: The sweetness and warmth of a classic Plexi and the more aggressive slant of the master volume amps of the ‘80s -- all tweaked to my taste. Dave has an innate understanding of where I’m coming from as a player and we’re alike in the way we hear tones. Dave doesn’t hear things as a technician, he hears things like a musician, and that made him really easy to work with. I grew up in the ‘70s and those muscular, articulate rock tones were the tones I always sought, but I made a name for myself in the ‘80s when you needed a little more aggression and a little more scream. I’ve always tried to retain a little of that ‘70s heart and I still do, and that’s what this amp does -- though it’s got plenty more on tap if you need it!”
The JEL-50 was specifically designed to take pedals well especially boosts, ODs, phasers, flangers, tremolos, and wahs. The ultra-transparent buffered, series effects loop takes time-based effects pedals and rack units equally well. This is the exact same FX loop Friedman uses on all its amplifiers including the legendary BE-100. The head cabinet features beautiful red tolex, white piping and solid Baltic Birch construction.
SPECIFICATIONS
- 50-Watt all-tube head
- Two channels
- Handwired in the USA
- Custom USA made transformers
- 2 x EL34 power tubes
- 3 x 12AX7 preamp tubes
- JEL channel - Gain, Master, 3-way Bright switch
- JEL Channel Hi/Lo (Push pull gain switch)
- Plexi channel - Gain, Volume, 3 way Bright Switch
- EQ- Bass, Middle, Treble shared with Ch1 and CH2
- Ultra-transparent series effects loop
- Thump knob - ( Rear ) Varies lowered response of the amps power section
- Presence - ( Rear) Varies high end content of the amps power section
- Single button foot switch for channel selections
- 4, 8 and 16 ohm Impedance jacks
- Limited Lifetime Warranty
- Dimensions: 8.75″ (D) x 24″ (W) x 10″ (H)
- Weight: 33.5 lbs
2x12” Celestion Creamback Loaded Extension Cab
The Friedman JEL 2x12” is a rear ported closed-back extension cabinet which utilizes tongue and groove Baltic Birch construction to deliver the bass, mid response and great sound you would expect from a Friedman cab. The JEL 212 Cab features red tolex, white piping and black grille cloth, designed to cosmetically match the Friedman Signature Jake E Lee heads.
At the heart of the cab is a Celestion G12M-65 Creamback 16 Ohm speaker. The G12M Creamback is perhaps the definitive vintage Celestion ceramic magnet guitar speaker. Developed in the mid-sixties, it was quickly adopted by players like Hendrix, Beck and Page, who typified the louder and more aggressive blues-rock playing styles that came to characterize that era. The higher power handling G12M-65 Creamback used in the JEL 1x12 produces that familiar woody tone, making it ideally suited when both vintage and modern tones are desired. The increased power handling brings with-it low-end grunt complementing the warm and vocal mid-range, crunchy upper mids and sweet, refined highs.
As with all Friedman cabinets, oversized 12-gauge speaker wire is soldered between the speaker and terminal, assuring you capture every ounce of valuable tone. This compact monster not only excels in the studio, but the perfect compliment to your stage rig. The Friedman JEL-212 Cab is handcrafted with pride in the U.S.A. and designed to withstand the rigors of the road.
SPECIFICATIONS
- Hand crafted in USA
- Cosmetics to match the Jake E Lee Signature Heads
- 2 x Celestion G12M-65 12" Creamback Speakers
- Nominal impedance - 8 Ohms
- Closed back -rear ported cabinet design
- Limited lifetime warranty
- Dimensions: 12" (D) x 30" (W) x 20.75" (H)
- Weight: 58 lbs.
The Friedman JEL-50 Head carries a street price of $2999.99 and the JEL-212 Cabinet carries a street price of $999.99.
For more information, please visit friedmanamplification.com
Friedman Amplification - All new Jake E Lee 50-Watt Head featuring Jordan Ziff - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.Friedman JEL-50 Jake E Lee Signature 50-watt Tube Head and 2x12" Cabinet
Jake E Lee 50W Tube Head 212 StkThe Boss GX-10 Multi-FX Processor offers 23 guitar amps, nine bass amps, and 170 effects for versatile sound creation.
Boss announces the GX-10, a powerful new amp and effects processor for guitar and bass. Equipped with the core sound engine and color touch display from the acclaimed GX-100 released in 2022, the GX-10 offers players the same inspiring experience in an even more portable footprint. Adding in multi-mode footswitches, an integrated expression pedal, and USB audio connectivity, the GX-10 seamlessly transitions from nightly stage performing to desktop recording, song creation, and daily practice sessions.
The GX-10 delivers a universe of ultra-responsive tones in a travel-ready size. There are 23 guitar amps and nine bass amps to choose from, including high-gain X-Ultra, X-Optima, and X-Titan types crafted with the latest BOSS modeling technologies. Players can color sounds with 170 different effects, including overdrives and distortions, mod effects, delays, and reverbs, plus dedicated bass effects and BOSS classics like Slow Gear, Octave, Slicer, and more.
The GX-10 enables fast sound creation with an inviting color touch display and four dynamic parameter knobs. Up to two amps and 15 effects are supported in each memory, and it’s easy to change effect order and create series or parallel routings by dragging blocks with a finger on the screen. Send/return jacks are available to integrate favorite pedals or an amp’s effects loop into the GX-10 signal flow.
The GX-10's clever control options provide versatile real-time sound adjustment possibilities while performing. Multiple control modes and user-assignable settings offer maximum flexibility with just three footswitches. By default, the expression pedal toggles between volume and wah and activates the tuner when the pedal is pulled back. But it can be customized to control nearly anything using the GX-10’s assign matrix.
Boss Tone Studio allows users to edit sounds and load their own speaker cab IRs from a Mac or Windows computer. The GX-10 also supports the optional Bluetooth® Audio MIDI Dual Adaptor, which unlocks on-the-gig wireless editing via the mobile version of the app.
Boss Tone Studio includes additional tools to organize GX-10 sounds for different gigs and playing situations. It also provides direct access to Boss Tone Exchange, an online platform for downloading professionally created sounds and sharing GX-10 Livesets with the global BOSS community. GX-100 Livesets are fully compatible with the GX-10 as well. In addition, there’s a built-in USB-C audio interface for capturing high-quality guitar tones in music production apps on computers and mobile devices.
The new Boss GX-10 Guitar Effects Processor will be available for purchase at authorized U.S. Boss retailers in October for $399.99.
For more information, please visit boss.info.