The country and bluegrass power duo show off a selection of their acoustic and electric guitars, which include gems like an original Frying Pan and a 1927 Montgomery Ward acoustic.
Since their debut, Before the Sun Goes Down, in 2014, Rob Ickes and Trey Hensley have made a name for themselves as some of the hottest country and bluegrass players in the business. As individuals, their credits range from Willie Nelson to Earl Scruggs to Merle Haggard—and as a duo, they’ve toured and recorded with artists including Tommy Emmanuel, Taj Mahal, Jorma Kaukonen & Hot Tuna, Luther Dickinson, and Molly Tuttle. It’s likely their forthcoming full-length release, Living in a Song, will only bolster their already impressive reputation.
Out on February 10th, Living in a Song is a new collection of two covers and 10 originals that were inspired by Ickes and Hensley’s life on the road. They collaborated with long-time producer Brent Maher (Merle Haggard, Willie Nelson) along with some award-winning songwriters to compose a total of 40 songs, which were then trimmed down to the resulting selection. That final cut of material leans into a classic country sound, with some Americana and bluegrass thrown in.
Along with the aforementioned credits, Ickes and Hensley have long been established, separately, as formidable musicians. Ickes has been International Bluegrass Music Association Dobro Player of the Year an incredible 15 times, and Hensley made his debut performance at the Grand Ole Opry at just 11 years old. In other words, the two have been around the block, and especially know their way around dobros and flattop acoustics.
Earlier this month, PG’s John Bohlinger met up with the duo at 3Sirens Studio in Nashville, where they played some mind-blowing music, and gave a rundown of some of their favorite guitars and gear.
Click here to pre-save Living in a Song which releases on Friday, Feb. 10.
Brought to you by D’Addario Humidipak.
Mind-Bending Bender
This dreadnought was built for Trey by the Oregon-based Preston Thompson Guitars in 2018. It’s the company’s D-MA model, with sinker mahogany back and sides and an Adirondack spruce top. But what truly makes the guitar special is its StringBender B-bender, which was built into the model by former Byrd and StringBender founder, Gene Parsons, himself. It’s also equipped with an LR Baggs Lyric. As for accessories, Trey uses D’Addario Nickel Bronze .013-.056 strings on all of his guitars, Blue Chip TAD60 picks, a Dunlop Blues Bottle slide, and a D’Addario Rich Robinson slide.
The Guts
Here's a tight shot of the inner mechanisms that engage the B-Bender.
Fighting Spirit
Trey’s favorite guitar is his 1954 Martin D-28. “I’ve had this one for about 20 years now,” he says, “I think I’m the third owner of it.” The first owner wore the neck down so that “it’s real skinny and gets super fat right at the fifth fret.” He brings his D-28 to most of his recording sessions, and while it also has an LR Baggs Lyric, “This guitar does not want to be plugged in at all,” he says, “It just fights back.” It has Brazilian rosewood back and sides; as for the top wood, “Anybody’s guess is as good as mine.”
Ugly Duckling
Found at Fanny’s House of Music in Nashville, this 1965 Harmony Sovereign Deluxe H1265 makes a bit of a statement with its prominent pickguard and mustache bridge. Or, as Trey puts it, “It’s possibly the ugliest guitar I’ve ever seen.” He calls the jumbo-bodied model his “Taj Mahal guitar,” as the bluesman requested it when Trey and Rob joined him for a few performances late last year. “I really like it,” Trey says, smiling, “It’s the guitar that shouldn’t be.”
No. 610
“This is probably one of my other favorites,” Trey says of his 2015 Wayne Henderson dreadnought—the guitar maker’s 610th build. Its specced to a Martin D-18, with mahogany back and sides. The Virginia builder famously built a few models for Eric Clapton, and notoriously has a very, very long wait list—which is why Trey was so afraid to put a pickup in it and take it out on the road after he got it. And then…. “The first night I took it out, it wasn’t on the strap button good, and it fell and hit the concrete floor. This piece here was split,” he says, gesturing to an area on the top plate. Thankfully, he was able to get it repaired. “It sounded really good before I dropped it, but it sounded about a million times better after I dropped it,” he says, “So, the moral of the story is: Drop your guitar.”
Before the War
Another D-18 copy, this 2017 Pre-War Guitars Co. model has mahogany back and sides, and is outfitted with an LR Baggs Anthem SL. It bears Taj Mahal’s signature on the front, and Trey’s on the back. The latter choice was Trey’s way of imitating Earl Scruggs, since he saw Scruggs had done the same to a couple of his instruments when he performed with him as a kid.
Black Dove
Next, a 2022 Gibson Elvis Dove, is “probably the only oddball acoustic I have,” says Trey. “I wasn’t planning on flatpicking on this thing, but I’ve already used it for some sessions.” Its maple back and sides make it the perfect choice to emulate the J-200 he borrowed from his producer for a country record he and Rob just finished recording.
Tried and True
Last in the acoustic queue is Trey’s 2021 Martin D-41. “This one’s been my main guitar for about a year now,” he says. It’s equipped with an LR Baggs Anthem SL, and has a bit of a lower setup compared to his other guitars—but with medium gauge strings, he says, it doesn’t buzz.
Loud and Clear
When Trey isn’t going DI through his LR Baggs Voiceprint, he runs his acoustics through his Fishman Loudbox Artist.
Go-To Gibson
Trey’s go-to electric is his Gibson Custom Shop 1958 Les Paul Reissue VOS, which he got in 2008. He keeps this guitar and his other electrics strung with D’Addario NYXL .010-.046 strings, which can be a bit jarring to his fretting hand when switching over from the .013s on his acoustics. “It takes a minute to not rip the neck off,” he says.
Byrd Build
This 2017 Parsons StringBender T-style was one of Gene Parsons’ early prototypes when he started building guitars.
Headshot For the Headstock
Here's Gene Parsons riding proudly on his 2017 T-style build for Trey Hensley.
To the T
The newest addition to Trey’s electric arsenal is this Berly Guitars Telecaster, built with Rocketfire ’60s-style pickups and “frets basically as big as my Les Paul.”
Trey Hensley’s Pedalboards (Acoustic)
Trey’s acoustic pedalboard is set up with a D’Addario tuner, an EHX Nano Q-Tron Envelope Filter, a Boss CE-2W Waza Craft Chorus, a Boss HM-2W Waza Craft Heavy Metal, a DigiTech Whammy Ricochet, an EarthQuaker Devices Ghost Echo Reverb, a Grace Design Alix preamp, and an LR Baggs Voiceprint. Power comes from a Voodoo Labs Pedal Power 2. It might be a bit unconventional for him to have two DIs, but he says he uses the Alix “for some EQ and mainly a boost; I’m bypassing it as a DI.” And, referring to the Voiceprint, he says, “If I can only take one pedal, it’s going to be that.”
Trey Hensley’s Pedalboards (Electric)
“I’ll preface it by saying, I don’t know what I’m doing,” admits Trey. On his electric pedalboard, he goes into his Dunlop Zakk Wylde Wah, then his D’Addario tuner—“You want that, after the wah,”—then into an EHX Micro Q-Tron, a Keeley Super Phat Mod, a Keeley Sweet Spot Johnny Hiland Super Drive, a JHS PackRat, an EHX J Mascis Ram’s Head Big Muff Pi, a Keeley Dark Side, and an MXR EVH Phase 90.
Ol’ Reliable
Trey has several amps for acoustic and electric. Today he was using a Fender ’68 Custom Princeton Reverb Reissue for his electric.
Bold and Byrly
“When you play a really good dobro, it’s in your face super fast,” says Rob Ickes, describing his main axe, a Byrl Guitars Rob Ickes Signature Series resonator—an instrument distinguished by its half-and-half ebony and curly maple fretboard. It’s equipped with a Fishman Nashville Reso Series pickup, which Ickes says is probably the first pickup that he’s used that’s nearly 100 percent faithful to the dobro sound. He uses D’Addario Nickel Bronze strings, Blue Chip thumb picks, and Bob Perry gold-plated fingerpicks, as well as a Scheerhorn bar slide.
Scheer Invention
This resonator guitar, made by Tim Scheerhorn, has Indian rosewood back and sides and a spruce top. According to Ickes, Scheerhorn “was kind of the Stradivarius of the dobro.” He was the first to start using solid woods—as opposed to the earlier use of plywood—and put sound posts inside the body, like those in a violin. “He also does a little baffle that helps force the sound out of the sound holes,” explains Ickes.
Maple Flames
The second Byrl resonator Ickes shared with us is made from flame maple, giving it that distinctive look, and is actually the first guitar he got from Byrl. He tunes it to an open G chord, which he recently discovered is the original Hawaiian tuning. It has a Beard Legend spun cone made of an aluminum alloy and named after Mike Auldridge.
One Man’s Trash
Ickes found this 1930s dobro at a music store owned by a friend outside of Franklin, Tennessee. It’s made with a stamped cone. “It’s a little bit garbage can, in a good way,” he says, “I’ll use it on sessions if I want a trashier sound.” He normally keeps it in a lower tuning, such as open D.
Family Heirloom
This 1927 Montgomery Ward guitar has a story as intriguing as its sound. It belonged to Ickes’ grandfather, who was a fiddle player: He discovered it one day in the attic of his family home. “This one spoke to me right out of the box,” he shares,” It had that funk—times 10.” It sports signatures from Taj Mahal and Merle Haggard, the latter of whom Ickes recorded a bluegrass album with back in 2006. “I take this to a lot of sessions, in case they need that funky kind of dirt-road sound,” he explains.
Let Slide
“This next one is a more modern version of that,” Ickes says of another model, a Wayne Henderson guitar which he says is the first slide guitar Henderson built. “I just said, ‘Do what you do, but raise the action a bit here at the nut.’” It has a Fishman Nashville Series Reso pickup which Ickes has go into a Fishman Aura Spectrum DI.
A Flash in the Pan
One of the most interesting guitars in Ickes’ collection is his 1932 Rickenbacker Frying Pan, an electric lap steel that was one of the first ever of its kind to be created. “It just cracks me up how they nailed it right out of the box,” he comments. Its single knob is a combination of tone and volume—“As you move to the right, it gets brighter and louder. As you move to the left it gets quieter.”
Silver Surfer
As you can tell, several of the guitars that Ickes brought on this Rig Rundown are from the 1930s, including this Rickenbacker lap steel, nicknamed the “Silver Surfer.” Its mirror-like fretboard made it difficult for Ickes to see the frets when playing live, so he had them covered in red tape, which make them stand out much better.
Black and White
The last of Ickes’ guitars is another 1930s Rickenbacker lap steel, which he fondly refers to as the “Panda,” due to its black-and-white decor. He loves how it sounds, but admits, “This is great if you don’t leave the house [with it],” as it’s very heavy and doesn’t really stay in tune.
Dulcet Dairy Tones
Despite how Ickes typically favors vintage amps, he’s fond of this newer 20-watt Milkman Creamer, which he bought with a lap steel from a friend in California after hearing the two in combination. It has all the vintage vibe without the hassle of old amps.
Li’l Champ
Another amp in Ickes’ collection is his ’50s Fender Champ.
Small Yet Mighty
A third amp that Ickes shared with us is a vintage 1930s Rickenbacker.
Rob Ickes’ Pedalboards (Dobro)
Ickes has two separate pedal boards for his dobro and for his lap steel. Both boards are powered with separate Truetone 1 Spots. He keeps things simple on his dobro board, which includes a Fishman Aura Spectrum DI, an MXR Eddie Van Halen Phase 90, a Walrus Audio Mako Series R1 Reverb, and a ’80s era Boss DM-2 Delay.
Rob Ickes' Lap Steel Pedalboard
The simple setup trend continues with his lap steel pedalboard, which is made up of another four pedals: an EXH Micro Q-Tron, a Keeley Super Phat Mod, an MXR Phase 90, and a Keeley Omni Reverb.
- Rig Rundown: Billy Strings ›
- 8 Licks Tony Rice Loved to Play ›
- Twang 101: Bluegrass Goes Electric! ›
- Rob Ickes & Trey Hensley’s New Songbook - Premier Guitar ›
The bassist, now with the Messthetics, has had a long learning journey. Thanks to the online-lesson boom, you can study directly from Lally.
Although it’s been years since the beginning of the pandemic, many monumental things can still be explained in a single phrase: It all started because of Covid. One of those is that you can take online bass lessons from Joe Lally, bassist and co-founder of Fugazi, the unyieldingly indie post-hardcore band that raged out of Washington, DC’s ever-vibrant punk scene. From 1987 to 2003, over the band’s six studio albums, assorted EPs, and hundreds of live shows, Lally demonstrated his utter mastery of intense, full-throttle bass playing and writing.
So you might be surprised to learn that such an accomplished low-ender didn’t always feel confident about his own musical knowledge. “I spent all that time in Fugazi not formally being able to articulate about music very well with the other people in the band,” Joe says. “It was very frustrating at times. There were times I wanted to leave the band because it felt like I couldn’t even talk about what I wanted to do.”
It was only after Fugazi went on indefinite hiatus that, realizing he wanted to keep making music, Joe decided to get some education. “I took a few lessons at Flea’s school in L.A., the Silverlake Conservatory. I studied with Tree, the dean of the school, who showed me some things about songwriting on piano. I was looking at it like I was getting piano lessons, but really he was showing me the sound of major, the sound of minor, and the sound of the dominant 7 chord. Those three chords are the basic beginnings of learning music theory.”
As Joe learned it, the major sound was “Here, There, and Everywhere" by the Beatles, the minor was Santana’s “Evil Ways,” and the dominant 7 was “I Feel Good” by James Brown. “I learned to play those chord changes on piano, and came to understand more about songs and completing my own song ideas.”
Joe mainly learned by asking questions. “To a degree, that’s what I want people to get from the lessons I give,” he continues. “There’s so much you can go into theory-wise, but you don’t really need to to be able to write music, play music, and figure out other people’s music.”
Joe went on to write and release three solo albums, as well as two with Ataxia, his project with Red Hot Chili Pepper guitarists John Frusciante and Josh Klinghoffer. In 2016, he formed instrumental jazz-punk fusion trio the Messthetics with Fugazi drummer Brendan Canty and genre-spanning guitar virtuoso Anthony Pirog. They’ve since toured heavily and released three full lengths. He also joined Ian Mackaye—Fugazi’s and the Evens’s singer-guitarist—along with Evens drummer Amy Farina to form Coriky.
Lally’s humble online flyer.
“I foolishly never picked up a book because I thought it would ruin what I did know. When I told a friend I was teaching theory, he asked, ‘Has it ruined your playing yet?’”
When off the road, Joe worked different jobs in DC’s independent music scene to pay the bills. But when the pandemic lockdown came, he decided to start giving online lessons. He made flyers and posted them on social media.
“I’m not teaching formal theory, which I think is weird and abstract and doesn’t show people everything,” says Joe. “It takes years of learning formally to see how everything is connected to see how this thing is part of that other thing we learned years ago. Most of my students are adults who have been playing but now want to know more about what they’ve been doing.”
But music theory is something we all operate within, says Joe, whether we’re knowledgeable about it or not. “We are engaged in theory. We just may not know it. When you’re playing or writing a song, you might think ‘that note sounds right’ or ‘that note sounds wrong.’ It's because we are relating it to something in theory that we’ve picked up from all the music we’ve listened to.”
Joe recognizes that some people are apprehensive about learning music theory, and he admits that when he was in Fugazi, he was, too. “I foolishly never picked up a book because I thought it would ruin what I did know. When I told a friend I was teaching theory, he asked, ‘Has it ruined your playing yet?’
“But formal study should use your thinking mind, and when you play, you’re outside of thinking. Creativity is outside of thought. You hear about jazz players who practice scales over and over, and what they’re really practicing is the sounds of these things that they want to hear. But when they play, they let go of all of that. So I realized my playing is never going to change. I’m always going to write the way I wrote.”
To immerse yourself in Joe’s creative world, check out the Messthetics’s 2024 album, The Messthetics and James Brandon Lewis, which adds saxophonist Lewis to the trio, bringing together Fugazi’s powerful rhythm section with two players from the creative improv world.
To inquire about bass lessons with Joe Lally, contact him on Instagram at @joelally898.
When Building Guitars—or Pursuing Anything—Go Down All the Rabbit Holes
Paul Reed Smith says being a guitar builder requires code-cracking, historical perspective, and an eclectic knowledge base. Mostly, it asks that we remain perpetual students and remain willing to become teachers.
I love to learn, and I don’t enjoy history kicking my ass. In other words, if my instrument-making predecessors—Ted McCarty, Leo Fender, Christian Martin, John Heiss, Antonio de Torres, G.B. Guadagnini, and Antonio Stradivari, to name a few—made an instrument that took my breath away when I played it, and it sounded better than what I had made, I wanted to know not just what they had done, but what they understood that I didn’t understand yet. And because it was clear to me that these masters understood some things that I didn’t, I would go down rabbit holes.
I am not a violin maker, but I’ve had my hands on some of Guadagnini’s and Stradivari’s instruments. While these instruments sounded wildly different, they had an unusual quality: the harder you plucked them the louder they got. That was enough to push me further down the rabbit hole of physics in instrument making. What made them special is a combination of deep understanding and an ability to tune the instrument and its vibrating surfaces so that it produced an extraordinary sound, full of harmonics and very little compression. It was the beginning of a document we live by at PRS Guitars called The Rules of Tone.
My art is electric and acoustic guitars, amplifiers, and speaker cabinets. So, I study bridge materials and designs, wood species and drying, tuning pegs, truss rods, pickups, finishes, neck shapes, inlays, electronics, Fender/Marshall/Dumble amp theories, schematics, parts, and overall aesthetics. I can’t tell you how much better I feel when I come to an understanding about what these masters knew, in combination with what we can manufacture in our facilities today.
One of my favorite popular beliefs is, “The reason Stradivari violins sound good is because of the sheep’s uric acid they soaked the wood in.” (I, too, have believed that to be true.) The truth is, it’s never just one thing: it’s a combination of complicated things. The problem I have is that I never hear anyone say the reason Stradivari violins sound good is because he really knew what he was doing. You don’t become a master of your craft by happenstance; you stay deeply curious and have an insatiable will to learn, apply what you learn, and progress.
“Acoustic and electric guitars, violins, drums, amplifiers, speaker cabinets–they will all talk to you if you listen.”
What’s interesting to me is, if a master passes away, everything they believed on the day they finished an instrument is still in that instrument. These acoustic and electric guitars, violins, drums, amplifiers, speaker cabinets—they will all talk to you if you listen. They will tell you what their maker believed the day they were made. In my world, you have to be a detective. I love that process.
I’ve had a chance to speak to the master himself. Leo Fender, who was not a direct teacher of mine but did teach me through his instruments, used to come by our booth at NAMM to pay his respects to the “new guitar maker.” I thought that was beautiful. I also got a chance to talk to Forrest White, who was Leo’s production manager, right before he passed away. What he wanted to know was, “How’d I do?” I said, “Forrest, you did great.” They wanted to know their careers and contributions were appreciated and would continue.
In my experience, great teachers throw a piece of meat over the fence to see if the dog will bite it. They don’t want to teach someone who doesn’t really want to learn and won’t continue their legacy and/or the art they were involved in. While I have learned so much from the masters who were gone before my time, I have also found that the best teaching is done one-on-one. Along my journey from high school bedroom to the world’s stages, I enrolled scores of teachers to help me. I didn’t justenroll them. I tackled them. I went after their knowledge and experience, which I needed for my own knowledge base to do this jack-of-all-trades job called guitar making and to lead a company without going out of business.
I’ve spent most of my career going down rabbit holes. Whether it’s wood, pickups, designs, metals, finishes, etc., I pay attention to all of it. Mostly, I’m looking backward to see how to go forward. Recently, we’ve been going more and more forward, and I can’t tell you how good that feels. For me, being a detective and learning is lifesaving for the company’s products and my own well-being.
Sometimes it takes a few days to come to what I believe. The majority of the time it’s 12 months. Occasionally, I’ll study something for a decade before I make up my mind in a strong way, and someone will then challenge that with another point of view. I’ll change my mind again, but mostly the decade decisions stick. I believe the lesson I’m hitting is “be very curious!” Find teachers. Stay a student. Become a teacher. Go down all the rabbit holes.
OM-balance and comfort suited for the fingerstylist on a budget.
Comfortably, agreeably playable. Balanced dimensions. Nice fretwork.
Lighter mahogany top looks less classically mahogany-like. Some compressed sounds in heavy-strumming settings.
$299
Guild OM-320
guildguitars.com
The Premier Guitar crew is spoiled when it comes to hanging out with nice flattops. But while those too-brief encounters with acoustics we can’t afford teach us a lot about the flattop at its most refined, they also underscore a disconnect between the cost and the acoustic guitar’s status as a true folk instrument of the people.
Guild’s OM-320, from the company’s new 300 series, sells for $299, which isn’t much more than a good-quality, entry-level flattop cost in the 1980s. Strikingly, there’s a lot of competition in this price class. Even so, the OM-320’s nice build quality and pretty tone in fingerpicking applications stand out in a very crowded price segment.
The United Guild of Deal-Seeking Pickers
Though Guild, in all its incarnations, has always made accessible guitars a part of their offerings, a $300 instrument with the company’s logo might give pause to players familiar with guitars from their various U.S. factories. Quality can be hit-or-miss on any guitar from any brand at the entry level. What’s more, a lot of guitars with different brand names come from just a few OEM facilities—lending a certain sameness on top of irregular quality. But the recent acquisition of Guild by Yamaha, who has a reputation for solid entry-level instruments, inspires confidence as far as these concerns go.
So, too, does the integrity of the OM-320 at the nuts-and-bolts level. I couldn’t find any overt lapses in quality control. And in many spots where that really counts, like the fretwork, the execution is especially good. Little details like the Guild logo overlay (rather than a simple decal) add a soupçon of luxury. So do the Guild-branded, Grover Sta-Tite-style butterbean tuners, which look stylish and feel sensitive and accurate.
“The neck inhabits a comfortable zone between C and D shapes that’s super agreeable and, at least in my case, a nice antidote for hand fatigue.”
Though the body is built from layered mahogany on the back and sides and a solid mahogany top, the latter is much lighter and amber- or honey-toned than the rich cocoa-hued mahogany tops you’d associate with a vintage Guild M-20, or, for that matter, theM-120 from the company’s contemporary Westerly line. As a result, you see a little more contrast in the grain and a little dimpling in certain sections of the wood. The lighter wood isn’t unattractive, it just looks less trad, if you’re chasing Nick Drake’s Bryter Layter style. If that’s important, you should adjust the “design/build” score appropriately.
Sit and Stay Awhile
Barring being covered in porcupine spines, almost any OM or 000 will qualify as a pure-comfort title finalist. It’s not too thick, too wide, nor too petite—a size and profile that also pays unique, civilized sonic dividends. Here, the OM body is complimented by a neck that feels like an especially natural match. I don’t have a bunch of inexpensive OMs on hand to compare, and there isn’t anything wildly unique about the shape, but the neck profile feels very proportionate to the body. It also, depending on your own sense of such things, inhabits a comfortable zone between C and D shapes that’s super agreeable and, at least in my case, a nice antidote for hand fatigue. The neck is not classically OM-like in terms of nut width. The M-320’s nut measures 1 13/16", which is typical of a 000, rather than the 1 3/4" associated with OMs. The extra width, of course, would make the guitar more appealing to some fingerstylists that need the space. At no point, however, did I feel anything close to cramped; it’s just very comfortable.
The combination of layered back and sides, OM/000 dimensions, and mahogany mean the OM-320 feels and sounds less than super-widescreen in terms of tone spectrum and power. Nevertheless, it sounds balanced and pretty—particularly with a droning, dropped 6th string and other more-elastic tunings where the guitar can exercise the lower extremes of its voice. Tuning to standard has the effect of highlighting midrange emphasis, which can get boxy and render the 3rd and 4th strings a bit less potent and present. That said, it’s still balanced and almost never collapses into a distorted harmonic blur. The bottom end maintains an appealing growl and, as long as you use a gentler picking approach, you can use the highest four strings in very dynamic ways. Using a capo emphasizes other cool, high-mid-focused voices in the guitar that coexist well with most strumming approaches.
The Verdict
Inexpensive guitars that feel great can make up for a lot of shortcomings in tone. But the OM-320’s deficiencies in the latter regard are few, and some perceived limitations, like midrange emphasis, are intrinsic to guitars with OM dimensions. So, while forceful strumming is not the OM-320’s strength, the comfortable playability might just lead you to those places anyway. And if you compensate accordingly with touch dynamics, you can conjure many sweetly chiming tones that might sound extra sweet given the bargain price
Featuring vintage tremolos, modern slicer effects, and stereo auto-panners, the update includes clever Rate and Tempo controls for seamless syncing and morphing.
Today Kemper announces the immediate availability PROFILER OS 12.0 including the highly anticipated collection of advanced Tremolo and Slicer FX for the entire range of KEMPER PROFILER guitar amps.
The Collection features three vintage tremolos, two modern slicer effects, and two stereo auto-panners, that have been derived from the slicer effects. They all feature a clever Rate and Tempo control system, that allows for syncing the tremolo to the song tempo, retriggering the timing by simply hitting the TAP switch, and changing or morphing the tremolo rate to different note values,
The new Advanced Tremolo Modules in Detail
- The Tube Bias Tremolo is the familiar Tremolo in the Kemper Profilers. Formally named "Tremolo“ and available in the PROFILERs since day one, it is a reproduction of the famous Fender Amp tremolos from the 50‘s. Placed in front of the amp it beautifully interacts with the amp distortion.
- The Photocell Tremolo dates back to the 60‘s and features a steeper pulse slope, and its width varies with the intensity.
- The Harmonic Tremolo also dates back to the 60‘s and was introduced by Fender. The low and high frequencies alternate with the tremolo rate.
- The Pulse Slicer is a modern slizer or stutter effect that will continuously transition from the smoothest sine wave to the sharpest square wave, using the "Edge“ parameter. The "Skew“ parameter changes the timing of the high level versus the low level, sometimes also called pulse width or duty cycle.
- The Saw Slicer creates a ramp like a saw wave. The saw wave has a falling ramp when "Edge“ is at full position, and a rising edge at zero position. Towards the middle position a rising and falling ramp are forming a triangle wave. The „Skew“ parameter changes the slope of the rising and falling ramp from a linear trajectory to a more convex or concave shape.
- The Pulse Autopanner and the Saw Autopanner are derivates from their respective Slicers, they spread their signals in the stereo panorama. The "Stereo“-control parameter is included in many effects of the PROFILER. Here, it introduces a novel "super-stereo" effect that lets the Autopanner send the signal well outside the regular stereo image. This effect works best if you are well positioned in the correct stereo triangle of your speakers. When you move the “Stereo” soft knob beyond the +/-100% setting, the super-stereo effect comes into place, reaching its maximum impact at +/-200%.
- A single press on the TAP button at the beginning of the bar will bring the rhythmic modulation effects, such as Tremolo or Slicer, back into sync with the music without changing the tempo. The sync will happen smoothly and almost unnoticeable, which is a unique feature. Of course, tapping the tempo is possible as well.
- Modulation Rate - The “Rate” control available in many modulation effects is based on a special philosophy that allows continuous control over the speed of the modulation and continuous Morphing, even when linked to the current tempo via the To Tempo option. The fine Rate resolution shines when seamlessly morphing from, e.g., 1/8 notes to 1/16 notes or triplets without a glitch and without losing the timing of the music.