The country and bluegrass power duo show off a selection of their acoustic and electric guitars, which include gems like an original Frying Pan and a 1927 Montgomery Ward acoustic.
Since their debut, Before the Sun Goes Down, in 2014, Rob Ickes and Trey Hensley have made a name for themselves as some of the hottest country and bluegrass players in the business. As individuals, their credits range from Willie Nelson to Earl Scruggs to Merle Haggard—and as a duo, they’ve toured and recorded with artists including Tommy Emmanuel, Taj Mahal, Jorma Kaukonen & Hot Tuna, Luther Dickinson, and Molly Tuttle. It’s likely their forthcoming full-length release, Living in a Song, will only bolster their already impressive reputation.
Out on February 10th, Living in a Song is a new collection of two covers and 10 originals that were inspired by Ickes and Hensley’s life on the road. They collaborated with long-time producer Brent Maher (Merle Haggard, Willie Nelson) along with some award-winning songwriters to compose a total of 40 songs, which were then trimmed down to the resulting selection. That final cut of material leans into a classic country sound, with some Americana and bluegrass thrown in.
Along with the aforementioned credits, Ickes and Hensley have long been established, separately, as formidable musicians. Ickes has been International Bluegrass Music Association Dobro Player of the Year an incredible 15 times, and Hensley made his debut performance at the Grand Ole Opry at just 11 years old. In other words, the two have been around the block, and especially know their way around dobros and flattop acoustics.
Earlier this month, PG’s John Bohlinger met up with the duo at 3Sirens Studio in Nashville, where they played some mind-blowing music, and gave a rundown of some of their favorite guitars and gear.
Click here to pre-save Living in a Song which releases on Friday, Feb. 10.
Brought to you by D’Addario Humidipak.
Mind-Bending Bender
This dreadnought was built for Trey by the Oregon-based Preston Thompson Guitars in 2018. It’s the company’s D-MA model, with sinker mahogany back and sides and an Adirondack spruce top. But what truly makes the guitar special is its StringBender B-bender, which was built into the model by former Byrd and StringBender founder, Gene Parsons, himself. It’s also equipped with an LR Baggs Lyric. As for accessories, Trey uses D’Addario Nickel Bronze .013-.056 strings on all of his guitars, Blue Chip TAD60 picks, a Dunlop Blues Bottle slide, and a D’Addario Rich Robinson slide.
The Guts
Here's a tight shot of the inner mechanisms that engage the B-Bender.
Fighting Spirit
Trey’s favorite guitar is his 1954 Martin D-28. “I’ve had this one for about 20 years now,” he says, “I think I’m the third owner of it.” The first owner wore the neck down so that “it’s real skinny and gets super fat right at the fifth fret.” He brings his D-28 to most of his recording sessions, and while it also has an LR Baggs Lyric, “This guitar does not want to be plugged in at all,” he says, “It just fights back.” It has Brazilian rosewood back and sides; as for the top wood, “Anybody’s guess is as good as mine.”
Ugly Duckling
Found at Fanny’s House of Music in Nashville, this 1965 Harmony Sovereign Deluxe H1265 makes a bit of a statement with its prominent pickguard and mustache bridge. Or, as Trey puts it, “It’s possibly the ugliest guitar I’ve ever seen.” He calls the jumbo-bodied model his “Taj Mahal guitar,” as the bluesman requested it when Trey and Rob joined him for a few performances late last year. “I really like it,” Trey says, smiling, “It’s the guitar that shouldn’t be.”
No. 610
“This is probably one of my other favorites,” Trey says of his 2015 Wayne Henderson dreadnought—the guitar maker’s 610th build. Its specced to a Martin D-18, with mahogany back and sides. The Virginia builder famously built a few models for Eric Clapton, and notoriously has a very, very long wait list—which is why Trey was so afraid to put a pickup in it and take it out on the road after he got it. And then…. “The first night I took it out, it wasn’t on the strap button good, and it fell and hit the concrete floor. This piece here was split,” he says, gesturing to an area on the top plate. Thankfully, he was able to get it repaired. “It sounded really good before I dropped it, but it sounded about a million times better after I dropped it,” he says, “So, the moral of the story is: Drop your guitar.”
Before the War
Another D-18 copy, this 2017 Pre-War Guitars Co. model has mahogany back and sides, and is outfitted with an LR Baggs Anthem SL. It bears Taj Mahal’s signature on the front, and Trey’s on the back. The latter choice was Trey’s way of imitating Earl Scruggs, since he saw Scruggs had done the same to a couple of his instruments when he performed with him as a kid.
Black Dove
Next, a 2022 Gibson Elvis Dove, is “probably the only oddball acoustic I have,” says Trey. “I wasn’t planning on flatpicking on this thing, but I’ve already used it for some sessions.” Its maple back and sides make it the perfect choice to emulate the J-200 he borrowed from his producer for a country record he and Rob just finished recording.
Tried and True
Last in the acoustic queue is Trey’s 2021 Martin D-41. “This one’s been my main guitar for about a year now,” he says. It’s equipped with an LR Baggs Anthem SL, and has a bit of a lower setup compared to his other guitars—but with medium gauge strings, he says, it doesn’t buzz.
Loud and Clear
When Trey isn’t going DI through his LR Baggs Voiceprint, he runs his acoustics through his Fishman Loudbox Artist.
Go-To Gibson
Trey’s go-to electric is his Gibson Custom Shop 1958 Les Paul Reissue VOS, which he got in 2008. He keeps this guitar and his other electrics strung with D’Addario NYXL .010-.046 strings, which can be a bit jarring to his fretting hand when switching over from the .013s on his acoustics. “It takes a minute to not rip the neck off,” he says.
Byrd Build
This 2017 Parsons StringBender T-style was one of Gene Parsons’ early prototypes when he started building guitars.
Headshot For the Headstock
Here's Gene Parsons riding proudly on his 2017 T-style build for Trey Hensley.
To the T
The newest addition to Trey’s electric arsenal is this Berly Guitars Telecaster, built with Rocketfire ’60s-style pickups and “frets basically as big as my Les Paul.”
Trey Hensley’s Pedalboards (Acoustic)
Trey’s acoustic pedalboard is set up with a D’Addario tuner, an EHX Nano Q-Tron Envelope Filter, a Boss CE-2W Waza Craft Chorus, a Boss HM-2W Waza Craft Heavy Metal, a DigiTech Whammy Ricochet, an EarthQuaker Devices Ghost Echo Reverb, a Grace Design Alix preamp, and an LR Baggs Voiceprint. Power comes from a Voodoo Labs Pedal Power 2. It might be a bit unconventional for him to have two DIs, but he says he uses the Alix “for some EQ and mainly a boost; I’m bypassing it as a DI.” And, referring to the Voiceprint, he says, “If I can only take one pedal, it’s going to be that.”
Trey Hensley’s Pedalboards (Electric)
“I’ll preface it by saying, I don’t know what I’m doing,” admits Trey. On his electric pedalboard, he goes into his Dunlop Zakk Wylde Wah, then his D’Addario tuner—“You want that, after the wah,”—then into an EHX Micro Q-Tron, a Keeley Super Phat Mod, a Keeley Sweet Spot Johnny Hiland Super Drive, a JHS PackRat, an EHX J Mascis Ram’s Head Big Muff Pi, a Keeley Dark Side, and an MXR EVH Phase 90.
Ol’ Reliable
Trey has several amps for acoustic and electric. Today he was using a Fender ’68 Custom Princeton Reverb Reissue for his electric.
Bold and Byrly
“When you play a really good dobro, it’s in your face super fast,” says Rob Ickes, describing his main axe, a Byrl Guitars Rob Ickes Signature Series resonator—an instrument distinguished by its half-and-half ebony and curly maple fretboard. It’s equipped with a Fishman Nashville Reso Series pickup, which Ickes says is probably the first pickup that he’s used that’s nearly 100 percent faithful to the dobro sound. He uses D’Addario Nickel Bronze strings, Blue Chip thumb picks, and Bob Perry gold-plated fingerpicks, as well as a Scheerhorn bar slide.
Scheer Invention
This resonator guitar, made by Tim Scheerhorn, has Indian rosewood back and sides and a spruce top. According to Ickes, Scheerhorn “was kind of the Stradivarius of the dobro.” He was the first to start using solid woods—as opposed to the earlier use of plywood—and put sound posts inside the body, like those in a violin. “He also does a little baffle that helps force the sound out of the sound holes,” explains Ickes.
Maple Flames
The second Byrl resonator Ickes shared with us is made from flame maple, giving it that distinctive look, and is actually the first guitar he got from Byrl. He tunes it to an open G chord, which he recently discovered is the original Hawaiian tuning. It has a Beard Legend spun cone made of an aluminum alloy and named after Mike Auldridge.
One Man’s Trash
Ickes found this 1930s dobro at a music store owned by a friend outside of Franklin, Tennessee. It’s made with a stamped cone. “It’s a little bit garbage can, in a good way,” he says, “I’ll use it on sessions if I want a trashier sound.” He normally keeps it in a lower tuning, such as open D.
Family Heirloom
This 1927 Montgomery Ward guitar has a story as intriguing as its sound. It belonged to Ickes’ grandfather, who was a fiddle player: He discovered it one day in the attic of his family home. “This one spoke to me right out of the box,” he shares,” It had that funk—times 10.” It sports signatures from Taj Mahal and Merle Haggard, the latter of whom Ickes recorded a bluegrass album with back in 2006. “I take this to a lot of sessions, in case they need that funky kind of dirt-road sound,” he explains.
Let Slide
“This next one is a more modern version of that,” Ickes says of another model, a Wayne Henderson guitar which he says is the first slide guitar Henderson built. “I just said, ‘Do what you do, but raise the action a bit here at the nut.’” It has a Fishman Nashville Series Reso pickup which Ickes has go into a Fishman Aura Spectrum DI.
A Flash in the Pan
One of the most interesting guitars in Ickes’ collection is his 1932 Rickenbacker Frying Pan, an electric lap steel that was one of the first ever of its kind to be created. “It just cracks me up how they nailed it right out of the box,” he comments. Its single knob is a combination of tone and volume—“As you move to the right, it gets brighter and louder. As you move to the left it gets quieter.”
Silver Surfer
As you can tell, several of the guitars that Ickes brought on this Rig Rundown are from the 1930s, including this Rickenbacker lap steel, nicknamed the “Silver Surfer.” Its mirror-like fretboard made it difficult for Ickes to see the frets when playing live, so he had them covered in red tape, which make them stand out much better.
Black and White
The last of Ickes’ guitars is another 1930s Rickenbacker lap steel, which he fondly refers to as the “Panda,” due to its black-and-white decor. He loves how it sounds, but admits, “This is great if you don’t leave the house [with it],” as it’s very heavy and doesn’t really stay in tune.
Dulcet Dairy Tones
Despite how Ickes typically favors vintage amps, he’s fond of this newer 20-watt Milkman Creamer, which he bought with a lap steel from a friend in California after hearing the two in combination. It has all the vintage vibe without the hassle of old amps.
Li’l Champ
Another amp in Ickes’ collection is his ’50s Fender Champ.
Small Yet Mighty
A third amp that Ickes shared with us is a vintage 1930s Rickenbacker.
Rob Ickes’ Pedalboards (Dobro)
Ickes has two separate pedal boards for his dobro and for his lap steel. Both boards are powered with separate Truetone 1 Spots. He keeps things simple on his dobro board, which includes a Fishman Aura Spectrum DI, an MXR Eddie Van Halen Phase 90, a Walrus Audio Mako Series R1 Reverb, and a ’80s era Boss DM-2 Delay.
Rob Ickes' Lap Steel Pedalboard
The simple setup trend continues with his lap steel pedalboard, which is made up of another four pedals: an EXH Micro Q-Tron, a Keeley Super Phat Mod, an MXR Phase 90, and a Keeley Omni Reverb.
- Rig Rundown: Billy Strings ›
- 8 Licks Tony Rice Loved to Play ›
- Twang 101: Bluegrass Goes Electric! ›
- Rob Ickes & Trey Hensley’s New Songbook - Premier Guitar ›
How this simple sustain stomp helped me bring one of my favorite David Lynch scenes to life and took me across oceans.
There’s a scene in David Lynch’sMulholland Drivewhere Naomi Watts and Laura Harring’s characters find themselves in a darkened, mostly empty theater. Against a backdrop of spooky, synthy chords, they breathlessly watch the night’s oddball emcee deliver an intense, cryptic soliloquy on recorded sound. A trumpet player slowly walks onto the stage, the two characters clutching each other. They—and you—get fully drawn into his muted, jazzy lines. Suddenly, he pulls his instrument away from the mic, throwing his hands in the air. But the solo continues. The narrator looks to the audience: “It’s all recorded.”
Like the best Lynch moments, it’s a thoroughly dramatic moment that needs to be experienced with all applicable senses. Words alone won’t do. This scene is meant to stick with you.
I had that scene in mind as I first plugged into an Electro-Harmonix Freeze. I wanted to play a note and have it keep going … and going … until the audience would see that those notes were just lingering in the air, my strings no longer vibrating, unsure what the effect is. The Freeze could do just that.
“This wasn’t some new iteration of some other effect—a crazy fuzz or a weird flanger. This was a new category.”
If you’ve never played one, the Freeze elegantly holds whatever you give it—a note, a chord, a pick scrape, or whatever else. For such an obvious effect to come out when it did felt so refreshingly groundbreaking. It represented new possibilities. This wasn’t some new iteration of some other effect—a crazy fuzz or a weird flanger. This was a new category.
Back in the ’70s, the EHX team had worked on the idea for a sustain pedal. “At that time, the best I could do was intelligent-splice-single-cycle-looping,” recalls Cockerell. “This looked for a waveform match in the same way that guitar tuning meters do, and then endlessly played one cycle. It worked reasonably well for saxophone or other instruments with strictly harmonic overtones, but it was hopeless for guitar.”
”The pedal only requires one knob for volume, one toggle for latching or fast/slow swell modes, and a footswitch.”
Fast-forward to the early ’00s when DSP chips became available that could reproduce more complex sounds and overtones. While he was working on the EHX Hog with John Pisani, the company’s current-day chief engineer, the idea for a sustain pedal reared its head once again. Cockerell used an algorithm with a special provision that avoids freezing on a pluck transient, thus eliminating the risk of that pesky click. And the Freeze was born.
Released in 2010, the Freeze has a simple beauty. The pedal only requires one knob for volume, one toggle for latching or fast/slow swell modes, and a footswitch. Within, there’s such a wide range of subtlety: How you hit the pedal after your attack greatly affects the response. With the level setting, you can create subtle drones, much like an electronic shruti box, meant to subtly fill space. Or you can set it more obviously as you change chords, freeing up your hands. At higher volume settings in fast momentary mode, you can create glitchy stutter effects. And the way it interacts with other pedals opens up entirely new worlds.
I threw myself into the pedal not long after it hit the market, learning its nuances and eventually buying a second one to create a stereo effect. With my retuned 12-string Strat, I blasted my amps with drones, blowing a few speakers with abandon. Soon, the Freeze changed my approach to the guitar, and I released a series of solo drone and noise albums that took me across the U.S. and Europe. When I recognized Bill Frisell using one during a solo set, I’d bonded with the pedal so much that it was like a friend was sitting in with my favorite guitar player.
“I blasted my amps with drones, blowing a few speakers with abandon.”
There are plenty of pedals that have followed, adding more functionality. EHX’s Pico Deep Freeze, most obviously, but also the Gamechanger Plus, TC Electronic Infinite Sample, and the Chase Bliss Onward—enough that guitar sustain pedals have become their own class of effect. As fabulous as those pedals are, I still cherish the simplicity of the Freeze, a rare thing that leaves all the creative decisions on our side of the pedalboard.
PG's host straps on a prototype Tele to unleash the Knife Drop's horror and heft only to dismantle Jack White's Triplecaster in one accidental Bigsby bomb.
Our columnist links a few memories together to lead us to another obscure guitar model—one he remembers from his childhood and came to acquire as an adult.
Do you have any “click and stick” movies that you love? Like when you are channel surfing and see a movie that you’ve watched a lot, and then just watch it again? Lately, for me, it’s been the 2015 movie The Revenant. It’s a truly brutal tale of survival set in 1820s frontier America. My gosh, that movie just draws me in every time. There’s one scene where the main character goes flying off a cliff while riding a horse! He just sort of falls/rolls through a pine tree and lands in the snow … and he still survives! It’s crazy!
It makes me think about an old childhood friend who lived up the street from me. Jerry and his parents lived in an old house on their grandparents’ large plot of land. On one part of the land there was an old orchard filled with all types of fruit trees and pines, and I remember how we would climb to the top of the pines and just roll ourselves down the side, Revenant style! If you fell the right way, the branches would kind of gently let you down to the next, but if you hit it wrong and got in between the branches, you’d be wrecked. It’s like we enjoyed getting hurt, and, of course, when you’re young, you can snap right back. Ah, the days when pain really didn’t hurt. Now I wake up with injuries, for real.
“The action was way high and the fret ends were sharp. It was basically a painful affair.”
So why am I talking about my click-and-stick movie and stupid childhood escapades? Well, let’s get back to memories of my old friend Jerry. First, the house he lived in was so old that it had real wooden siding, but it hadn’t been painted in forever so the exterior took on a worn, faded, haunted house vibe. Second, his carpet was so tattered that it was being held together with duct tape. Lastly, I remember his dad had a cool, old electric guitar in the living room. His dad would let me play it sometimes, and I remember that it actually hurt to play! The action was way high and the fret ends were sharp. It was basically a painful affair. Not falling-out-of-a-tree painful, but as bad as it comes with guitars. It had the label “Conrad,” and young Frank didn’t realize that he’d be looking for that guitar again one day. I mean, it did have four pickups and lots of knobs and switches!
Made at the old Japanese Matsumoko factory in the ’60s, this Conrad Bison 1233 has four pickups and a 27" scale.
Years later, I would discover that his was a Conrad Bison guitar. The model came in a few different configurations, but the four-pickup design was designated as the 1233. Primarily featuring a lovely sunburst, these Bisons were made at the amazing old Matsumoku factory in Japan and were imported by the David Wexler Company that was based in Chicago. Matsumoku always had a good supply of aged wood, and many of the guitars made there are resonant and built well. The Bisons first appeared around 1966 and had a rather good run into the early ’70s.
Simple volume/tone knobs are paired with preset solo/rhythm switches that power alnico magnets. There’s an on/off switch for each pickup, and the sound really covers all the bases. Thumpy lows and crisp highs are all there. And, the pickups handle fuzz and distortion with ease. The Bisons also came in one- and two-pickup configurations with a normal scale, but the four-pickup ones have a longer, 27" scale, which is common for Matsumoku-made electrics.
So there it is: pain, survival, American frontier, Bison, haunted houses. It all sticks together like a duct-taped carpet. Click and stick, baby!
A 1000-watt speaker cabinet crafted for musicians who demand power and precision. Sunn Amps intends to reinvent the standard 4x12 configuration with the introduction of this new cabinet.
The Sunn Amps DoomBox is built to accommodate both guitar and bass, offering an impressive 1000-watt handling capacity—making it the first commercially available 4x12 cabinet with such high power handling. With four specially designed 12” drivers rated at 250 watts each, this cabinet provides clean, unrestrained sound levels that can maintain power integrity across all frequencies, ideal for high-volume performances.
Inspired and developed using feedback from artists and bands who rely on the depth of lower tunings and high volume genres, the DoomBox was engineered to meet the unique demands of professional musicians looking for a robust, high-efficiency cab that can translate the raw power of their sound without compromise.
Premium Craftsmanship and Materials
The Doom Box cabinet is crafted from solid finger-jointed Baltic Birch plywood, ensuring both durability and tonal clarity. Each cabinet is constructed by hand in the U.S.A. using original 1930s machinery, the DoomBox reflects Sunn’s historic commitment to quality, contrasting with some of the mass-produced, MDF-based cabinets on the market today. The cabinet’s aluminum basket, ferrite magnet, and custom Sunn weave Tolex with a custom grill design complete its professional-grade build.
Technical Specifications:
• Power Handling: 1000W
• Inputs: 1 x ¼”
• Impedance: 8 Ohm
• Drivers: 4 x Sunn 12S250
• Construction: Marine Grade Baltic Birch
• Dimensions: 29.25” X 30” X 14”
• Weight: 107 lbs
• Price: $2399.00
With clear low-end punch, even sound response, and ample air movement, the Doom Box ensures that every note reaches the audience with clarity and power. This cabinet is a game-changer for musicians who need high-performance, road-ready equipment that enhances their unique sound.