The country and bluegrass power duo show off a selection of their acoustic and electric guitars, which include gems like an original Frying Pan and a 1927 Montgomery Ward acoustic.
Since their debut, Before the Sun Goes Down, in 2014, Rob Ickes and Trey Hensley have made a name for themselves as some of the hottest country and bluegrass players in the business. As individuals, their credits range from Willie Nelson to Earl Scruggs to Merle Haggard—and as a duo, they’ve toured and recorded with artists including Tommy Emmanuel, Taj Mahal, Jorma Kaukonen & Hot Tuna, Luther Dickinson, and Molly Tuttle. It’s likely their forthcoming full-length release, Living in a Song, will only bolster their already impressive reputation.
Out on February 10th, Living in a Song is a new collection of two covers and 10 originals that were inspired by Ickes and Hensley’s life on the road. They collaborated with long-time producer Brent Maher (Merle Haggard, Willie Nelson) along with some award-winning songwriters to compose a total of 40 songs, which were then trimmed down to the resulting selection. That final cut of material leans into a classic country sound, with some Americana and bluegrass thrown in.
Along with the aforementioned credits, Ickes and Hensley have long been established, separately, as formidable musicians. Ickes has been International Bluegrass Music Association Dobro Player of the Year an incredible 15 times, and Hensley made his debut performance at the Grand Ole Opry at just 11 years old. In other words, the two have been around the block, and especially know their way around dobros and flattop acoustics.
Earlier this month, PG’s John Bohlinger met up with the duo at 3Sirens Studio in Nashville, where they played some mind-blowing music, and gave a rundown of some of their favorite guitars and gear.
Click here to pre-save Living in a Song which releases on Friday, Feb. 10.
Brought to you by D’Addario Humidipak.
Mind-Bending Bender
This dreadnought was built for Trey by the Oregon-based Preston Thompson Guitars in 2018. It’s the company’s D-MA model, with sinker mahogany back and sides and an Adirondack spruce top. But what truly makes the guitar special is its StringBender B-bender, which was built into the model by former Byrd and StringBender founder, Gene Parsons, himself. It’s also equipped with an LR Baggs Lyric. As for accessories, Trey uses D’Addario Nickel Bronze .013-.056 strings on all of his guitars, Blue Chip TAD60 picks, a Dunlop Blues Bottle slide, and a D’Addario Rich Robinson slide.
The Guts
Here's a tight shot of the inner mechanisms that engage the B-Bender.
Fighting Spirit
Trey’s favorite guitar is his 1954 Martin D-28. “I’ve had this one for about 20 years now,” he says, “I think I’m the third owner of it.” The first owner wore the neck down so that “it’s real skinny and gets super fat right at the fifth fret.” He brings his D-28 to most of his recording sessions, and while it also has an LR Baggs Lyric, “This guitar does not want to be plugged in at all,” he says, “It just fights back.” It has Brazilian rosewood back and sides; as for the top wood, “Anybody’s guess is as good as mine.”
Ugly Duckling
Found at Fanny’s House of Music in Nashville, this 1965 Harmony Sovereign Deluxe H1265 makes a bit of a statement with its prominent pickguard and mustache bridge. Or, as Trey puts it, “It’s possibly the ugliest guitar I’ve ever seen.” He calls the jumbo-bodied model his “Taj Mahal guitar,” as the bluesman requested it when Trey and Rob joined him for a few performances late last year. “I really like it,” Trey says, smiling, “It’s the guitar that shouldn’t be.”
No. 610
“This is probably one of my other favorites,” Trey says of his 2015 Wayne Henderson dreadnought—the guitar maker’s 610th build. Its specced to a Martin D-18, with mahogany back and sides. The Virginia builder famously built a few models for Eric Clapton, and notoriously has a very, very long wait list—which is why Trey was so afraid to put a pickup in it and take it out on the road after he got it. And then…. “The first night I took it out, it wasn’t on the strap button good, and it fell and hit the concrete floor. This piece here was split,” he says, gesturing to an area on the top plate. Thankfully, he was able to get it repaired. “It sounded really good before I dropped it, but it sounded about a million times better after I dropped it,” he says, “So, the moral of the story is: Drop your guitar.”
Before the War
Another D-18 copy, this 2017 Pre-War Guitars Co. model has mahogany back and sides, and is outfitted with an LR Baggs Anthem SL. It bears Taj Mahal’s signature on the front, and Trey’s on the back. The latter choice was Trey’s way of imitating Earl Scruggs, since he saw Scruggs had done the same to a couple of his instruments when he performed with him as a kid.
Black Dove
Next, a 2022 Gibson Elvis Dove, is “probably the only oddball acoustic I have,” says Trey. “I wasn’t planning on flatpicking on this thing, but I’ve already used it for some sessions.” Its maple back and sides make it the perfect choice to emulate the J-200 he borrowed from his producer for a country record he and Rob just finished recording.
Tried and True
Last in the acoustic queue is Trey’s 2021 Martin D-41. “This one’s been my main guitar for about a year now,” he says. It’s equipped with an LR Baggs Anthem SL, and has a bit of a lower setup compared to his other guitars—but with medium gauge strings, he says, it doesn’t buzz.
Loud and Clear
When Trey isn’t going DI through his LR Baggs Voiceprint, he runs his acoustics through his Fishman Loudbox Artist.
Go-To Gibson
Trey’s go-to electric is his Gibson Custom Shop 1958 Les Paul Reissue VOS, which he got in 2008. He keeps this guitar and his other electrics strung with D’Addario NYXL .010-.046 strings, which can be a bit jarring to his fretting hand when switching over from the .013s on his acoustics. “It takes a minute to not rip the neck off,” he says.
Byrd Build
This 2017 Parsons StringBender T-style was one of Gene Parsons’ early prototypes when he started building guitars.
Headshot For the Headstock
Here's Gene Parsons riding proudly on his 2017 T-style build for Trey Hensley.
To the T
The newest addition to Trey’s electric arsenal is this Berly Guitars Telecaster, built with Rocketfire ’60s-style pickups and “frets basically as big as my Les Paul.”
Trey Hensley’s Pedalboards (Acoustic)
Trey’s acoustic pedalboard is set up with a D’Addario tuner, an EHX Nano Q-Tron Envelope Filter, a Boss CE-2W Waza Craft Chorus, a Boss HM-2W Waza Craft Heavy Metal, a DigiTech Whammy Ricochet, an EarthQuaker Devices Ghost Echo Reverb, a Grace Design Alix preamp, and an LR Baggs Voiceprint. Power comes from a Voodoo Labs Pedal Power 2. It might be a bit unconventional for him to have two DIs, but he says he uses the Alix “for some EQ and mainly a boost; I’m bypassing it as a DI.” And, referring to the Voiceprint, he says, “If I can only take one pedal, it’s going to be that.”
Trey Hensley’s Pedalboards (Electric)
“I’ll preface it by saying, I don’t know what I’m doing,” admits Trey. On his electric pedalboard, he goes into his Dunlop Zakk Wylde Wah, then his D’Addario tuner—“You want that, after the wah,”—then into an EHX Micro Q-Tron, a Keeley Super Phat Mod, a Keeley Sweet Spot Johnny Hiland Super Drive, a JHS PackRat, an EHX J Mascis Ram’s Head Big Muff Pi, a Keeley Dark Side, and an MXR EVH Phase 90.
Ol’ Reliable
Trey has several amps for acoustic and electric. Today he was using a Fender ’68 Custom Princeton Reverb Reissue for his electric.
Bold and Byrly
“When you play a really good dobro, it’s in your face super fast,” says Rob Ickes, describing his main axe, a Byrl Guitars Rob Ickes Signature Series resonator—an instrument distinguished by its half-and-half ebony and curly maple fretboard. It’s equipped with a Fishman Nashville Reso Series pickup, which Ickes says is probably the first pickup that he’s used that’s nearly 100 percent faithful to the dobro sound. He uses D’Addario Nickel Bronze strings, Blue Chip thumb picks, and Bob Perry gold-plated fingerpicks, as well as a Scheerhorn bar slide.
Scheer Invention
This resonator guitar, made by Tim Scheerhorn, has Indian rosewood back and sides and a spruce top. According to Ickes, Scheerhorn “was kind of the Stradivarius of the dobro.” He was the first to start using solid woods—as opposed to the earlier use of plywood—and put sound posts inside the body, like those in a violin. “He also does a little baffle that helps force the sound out of the sound holes,” explains Ickes.
Maple Flames
The second Byrl resonator Ickes shared with us is made from flame maple, giving it that distinctive look, and is actually the first guitar he got from Byrl. He tunes it to an open G chord, which he recently discovered is the original Hawaiian tuning. It has a Beard Legend spun cone made of an aluminum alloy and named after Mike Auldridge.
One Man’s Trash
Ickes found this 1930s dobro at a music store owned by a friend outside of Franklin, Tennessee. It’s made with a stamped cone. “It’s a little bit garbage can, in a good way,” he says, “I’ll use it on sessions if I want a trashier sound.” He normally keeps it in a lower tuning, such as open D.
Family Heirloom
This 1927 Montgomery Ward guitar has a story as intriguing as its sound. It belonged to Ickes’ grandfather, who was a fiddle player: He discovered it one day in the attic of his family home. “This one spoke to me right out of the box,” he shares,” It had that funk—times 10.” It sports signatures from Taj Mahal and Merle Haggard, the latter of whom Ickes recorded a bluegrass album with back in 2006. “I take this to a lot of sessions, in case they need that funky kind of dirt-road sound,” he explains.
Let Slide
“This next one is a more modern version of that,” Ickes says of another model, a Wayne Henderson guitar which he says is the first slide guitar Henderson built. “I just said, ‘Do what you do, but raise the action a bit here at the nut.’” It has a Fishman Nashville Series Reso pickup which Ickes has go into a Fishman Aura Spectrum DI.
A Flash in the Pan
One of the most interesting guitars in Ickes’ collection is his 1932 Rickenbacker Frying Pan, an electric lap steel that was one of the first ever of its kind to be created. “It just cracks me up how they nailed it right out of the box,” he comments. Its single knob is a combination of tone and volume—“As you move to the right, it gets brighter and louder. As you move to the left it gets quieter.”
Silver Surfer
As you can tell, several of the guitars that Ickes brought on this Rig Rundown are from the 1930s, including this Rickenbacker lap steel, nicknamed the “Silver Surfer.” Its mirror-like fretboard made it difficult for Ickes to see the frets when playing live, so he had them covered in red tape, which make them stand out much better.
Black and White
The last of Ickes’ guitars is another 1930s Rickenbacker lap steel, which he fondly refers to as the “Panda,” due to its black-and-white decor. He loves how it sounds, but admits, “This is great if you don’t leave the house [with it],” as it’s very heavy and doesn’t really stay in tune.
Dulcet Dairy Tones
Despite how Ickes typically favors vintage amps, he’s fond of this newer 20-watt Milkman Creamer, which he bought with a lap steel from a friend in California after hearing the two in combination. It has all the vintage vibe without the hassle of old amps.
Li’l Champ
Another amp in Ickes’ collection is his ’50s Fender Champ.
Small Yet Mighty
A third amp that Ickes shared with us is a vintage 1930s Rickenbacker.
Rob Ickes’ Pedalboards (Dobro)
Ickes has two separate pedal boards for his dobro and for his lap steel. Both boards are powered with separate Truetone 1 Spots. He keeps things simple on his dobro board, which includes a Fishman Aura Spectrum DI, an MXR Eddie Van Halen Phase 90, a Walrus Audio Mako Series R1 Reverb, and a ’80s era Boss DM-2 Delay.
Rob Ickes' Lap Steel Pedalboard
The simple setup trend continues with his lap steel pedalboard, which is made up of another four pedals: an EXH Micro Q-Tron, a Keeley Super Phat Mod, an MXR Phase 90, and a Keeley Omni Reverb.
- Rig Rundown: Billy Strings ›
- 8 Licks Tony Rice Loved to Play ›
- Twang 101: Bluegrass Goes Electric! ›
- Rob Ickes & Trey Hensley’s New Songbook - Premier Guitar ›
Don't miss your chance to win a Yamaha Pacifica Standard Plus – the perfect blend of versatility and style. Enter now and make this go-to guitar yours. Giveaway ends January 7!
Yamaha PACS+12 Pacifica Standard Plus Electric Guitar - Sparkle Blue, Rosewood Fingerboard
Pacifica Standard Plus guitars were designed for players seeking to discover their own unique sound. They deliver exceptional sound and playability, and feature a newly designed alder body, slim, C-shape maple neck with a rosewood or maple fingerboard, Reflectone pickups co-developed with Rupert Neve Designs and a choice of four vibrant finishes.
PG contributor Tom Butwin takes us through three exceptional solidbody electric guitars: the versatile Gibson Les Paul Studio, the uniquely styled Zemaitis SCW22, and the dynamic PRS CE 24. Each brings a distinct flavor—find out which one matches your style!
Gibson Les Paul Modern Studio Electric Guitar - Worn White
When a guitar is “the one,” you know it. It feels right in your hands and delivers the sounds you hear in your head. It becomes your faithful companion, musical soulmate, and muse. It helps you express your artistic vision. We designed the Les Paul™ Studio to be precisely that type of guitar: the perfect musical companion, the guitar you won’t be able to put down. The one guitar you’ll be able to rely on every time and will find yourself reaching for again and again.
PRS CE 24 - Faded Blue Smokeburst
Classic PRS design and quality meets bolt-on construction with the CE 24. Its 25” scale length sits comfortably between short and longer scales and dual 85/15 pickups and patented PRS tremolo bring modern appeal.
Zemaitis SCW22
The body shape without metal top but developed based on an iconic Zemaitis Disc Front model.
Zemaitis guitar without a metal top, but you still see the legacy of Zemaitis in detail.
Our columnist ponders the business-to-consumer model, and how the design of online stores might be more crucial to the stompbox industry than we’d like to admit.
Let’s open things up with a TV/movie trope. The character on screen has a speech that they’ve been preparing for once they’re called up onstage to address the audience. When they finally get up to the lectern to deliver it, they pause, give the attendees a look over, and rip up their script in a dramatic fashion before pursuing an off-the-cuff, heartfelt message that goes on to invigorate the crowd and inspire a roaring ovation. For right now—I’m at least doing the first part of that. I’m abandoning my planned topic. Consider this me ripping up my finely curated index cards.
Before sitting down at the computer, I was thinking about the title of this column—“State of the Stomp.” Perhaps I’m being a bit too on-the-nose, but I started to ask myself, “What is the state of the stompbox world?” As in, this niche section inside of this niche industry that we find ourselves traversing. But, I can only speak for myself and what I’ve experienced firsthand and heard secondhand. That being said, let’s chat about the current state of the stompbox world.
This year marks my 10-year anniversary in the boutique-effects world. In speaking to the state of affairs in those 10 years, I’ve witnessed trends, domestic growth, international growth, product collaborations, companies closing doors, others opening doors, dealer decline, e-commerce growth, and more. The last, e-commerce, is the current state that we find ourselves in—an ever-growing, bustling digital presence that brings with it the B2C (business-to-consumer) model.
This isn’t completely new terrain for us by any stretch. It is, however, something that was only a minor percentage of our business. I have often referred to our sales as being 80 percent dealer and 20 percent direct. I would say that was the case from 2014 to 2020, but over the last few years the dealer vs. direct numbers have pretty much flipped.
Why has it flipped in favor of direct sales? That’s a simple yet complex question that would rob me of sleep if I let it. I would also frame the question in the inverse: “Why have dealer orders and reorders slowed down?” Market oversaturation? Economy? I would find it difficult to imagine that economic changes haven’t been trolling consumer purchasing. Us manufacturers know that it has directly impacted raw materials. As a niche corner of the MI world, that’s scary. Especially when you’re a manufacturer of nonessentials. When essentials go up in cost, it doesn’t feel great, but more easily gets shrugged off. When nonessentials go up, purchases of them get scaled back or hauled off completely.
“Why has it flipped in favor of direct sales? That’s a simple yet complex question that would rob me of sleep if I let it.”
In conversations I’ve had with industry colleagues, there’s almost a universal trend—sales are slow. This brings us back to the “why?” A place that my company finds itself in right now is close to the opposite. We are swamped with direct orders and dealer orders. However, of all the direct and dealer orders that we have been flooded with since May, 90 percent or more are for our DIY offerings. A big reason for this is due to the fact that the DIY market is smaller than standard pedals, we offer tools that don’t already exist, and the pricing is very attractive.
In May, “Short Circuit” launched. A recurring segment on the ever-popular JHS Show on YouTube, “Short Circuit” features founder Josh Heath Scott explaining effects-circuit basics while breadboarding them—using our DIY products. This, along with giveaways and kit collaborations between CopperSound and JHS, has led to a huge sales influx in what the community has coined “the JHS effect.”
I also find it important to highlight that my affinity for the brick and mortar has not diminished. But I will say that their ability to offer an array of gear from various manufacturers feels like a double-edged sword. If a particular store carries 20 brands, they can more easily give appropriate attention to each brand and subsequent model they stock. This includes website pictures, videos, copy, and SEO for each product. Now, if that same store expands to 200 brands, the bandwidth for each product gets significantly decreased.
So, while that dealer has 200 brands to focus on, we, the manufacturer, only have ourselves, making it easier for us to tend to our website. In a world where 70-plus percent of consumers shop online, it really makes me wonder if this is the make-or-break factor when it comes to where and how people choose to do that shopping.
And now, I’d like to thank you all for the standing ovation in response to my inspiring, off-the-cuff speech.
Loud, evil, searing hot, and unexpectedly versatile, the Fuzz War’s demented bass cousin has a bold and more-complex personality all its own that sounds radical with guitar, too.
Evil. Just plain evil. Unexpected and vast variation. Responds interestingly to bass volume and tone attenuation. Wet/dry mix control. Sounds amazing (and extra evil) with guitar.
None.
$195
Death By Audio Bass War
deathbyaudio.com
If you like your fuzz measured in megatonnage, the Death By AudioFuzz War is one of life’s great joys. And if you’re a bass player with similar predilections and accustomed to watching guitar players have all the fun, the new DBA Bass War will be sweet revenge.
The original Fuzz War is a creatively twisted derivative of the Colorsound Supa Tone Bender But while you can hear some family resemblance among the Tone Bender, the Fuzz War, and Bass War, the latter is a very different animal indeed. I’m pretty sure it’s louder than the Fuzz War (holy #@*!). The fuzz is also much brighter than a Fuzz War, which sounded positively muddy by comparison.
That means a bass player has lightyears of headroom and range within which to shape their tone. And for such a loud, hectic pedal, it can be really precise and surgical. The experience of reshaping fuzz sounds is made easier, more fun, and much more expressive for the oversized outboard tone and fuzz controls, which can be swept with your toe to achieve wild filter effects. Along with the cutting fuzz tonalities, that lends the Bass War an almost synth-like feel and functionality. The pedal also responds in interesting ways to bass volume and tone attenuation: Lower bass volume generates less compressed, more focused, but still very insane tones that can be boosted to superheated levels with the pedal’s volume knob. Add in the dry/wet mix knob, which lends exponentially more complexity and range to the Bass War’s voice, and you’re talking about an exceedingly varied and evil fuzz device. Oh ... it sounds freaking amazing with guitar, too—yielding psychotically piercing lead tones, vintage biker fuzz, and vicious punk and metal grind. Wow.