Here are 16 of our favorite stomp stations from the past year, including Chris Shiflett, Joe Bonamassa, Gary Holt, J Mascis, the Aristocrats’ Bryan Beller, Wolf Van Halen, Shinedown, and more.
The Aristocrats’ Bryan Beller
Photo by Manuela HäuBler
Starting at top right, Bryan Beller’s board has a pair of Xotic EP Boosters to bring up the output of his two passive instruments to match his Lull bass. Next comes a Demeter COMP-1 Opto Compulator that’s always on, followed by a TC Electronic Hall of Fame Reverb, Boss CE-2B Bass Chorus, Boss DD-3 Digital Delay, and a TC Electronic Flashback Delay/Looper. Moving to the bottom left, there’s a Boss OC-2 Octave and an Xotic Bass BB Preamp (Beller’s main overdrive). The Darkglass Electronics Vintage Microtubes and MXR M109S Six Band EQ are used for a beefier, RAT-like sound. Then there’s an EHX Micro POG set to an octave up and an old DigiTech X-Series Bass Driver that pushes the BB Preamp and runs into the Dunlop 105Q Cry Baby Bass Wah pedal (white), giving vocal-like sweeps more definition. Beller also has a Dunlop DVP3 Volume (X) Volume and Expression pedal and a Boss TU-2 Chromatic Tuner. Beller has incorporated the Behringer FCB1010 MIDI controller into his rig so he can provide some “low-rent Geddy Lee” moments in the set via a Roland JV-1010 64-Voice Synth Module.
Beller has incorporated the Behringer FCB1010 MIDI controller into his rig so he can provide some “low-rent Geddy Lee” moments in the set via a Roland JV-1010 64-Voice Synth Module.
Using the Raven Labs MDB-1 Mixer/Direct Box/Buffer for his pedals and running the Roland JV-1010 into his amps allows Beller to employ both his bass and the synth module at the same time.
Rig Rundown: The Aristocrats' Guthrie Govan & Bryan Beller [2022]
Nitty Gritty Dirt Band’s Jeff and Jaime Hanna
Jeff Hanna
Jeff Hanna, who co-founded the Nitty Gritty Dirt Band in 1966, runs his acoustic guitars through a Fishman Aura Spectrum DI and a Boss TU-3 Chromatic Tuner. The electric side of his board includes another Boss TU-3, a Paul Cochrane Tim V3 Overdrive, a Keeley Katana Clean Boost, a J. Rockett GTO, a Keeley-modded Boss TR-2 Tremolo, and a Keeley Mag Echo.
Jaime Hanna
His son Jaime combines acoustic and electric pedals on one board. The acoustic side features a Fishman Aura Spectrum DI, Boss TU-3 Chromatic Tuner, and a Radial JDI direct box as a back-up. For electric, there’s an Ernie Ball volume pedal that feeds a TC Electronic tuner. The main out hits a Mesa/Boogie Stowaway Class-A Input Buffer, a Keeley Compressor, a Paul Cochrane Tim Overdrive, a J. Rockett Archer, an MXR Super Badass Distortion, a Boss GE-7 Equalizer modded by Nashville’s XTS, and a Line 6 M9 Stompbox Modeler Multi-Effects pedal. A Truetone 1 SPOT PRO CS12 provides the juice.
Rig Rundown: The Nitty Gritty Dirt Band’s Jeff and Jaime Hanna
Tetrarch’s Diamond Rowe
Photo by Amy Harris
Shredder Diamond Rowe keeps things succinct. Her stage setup features an always-on Ibanez TS9 Tube Screamer and a DigiTech Whammy for pure fun and note obliterating. A pair of utilitarian Boss stomps—an NS-2 Noise Suppressor and TU-3 Chromatic Tuner—keep her strings clean and accurate. There’s also a Voodoo Lab Pedal Power ISO-5 and Ground Control Pro MIDI Foot Controller.
In a separate rack, Rowe hides her “freak tone” patch. There lurks a Boss RV-6 Reverb, Boss DD-7 Digital Delay, Boss CE-5 Chorus Ensemble, and a MXR Uni-Vibe Chorus/Vibrato, plus a pair of tucked-away MXR Carbon Copy Analog Delays. The rack toys are fired by a Voodoo Lab Pedal Power 2 Plus.
Rig Rundown: Tetrarch's Diamond Rowe & Josh Fore
Marcus King
Roots powerhouse MarcusKing runs his guitar’s cable into a Dunlop Volume (X) 8. Then his signal hits a Dunlop Cry Baby Wah, an MXR Booster, an Ibanez TS9 Tube Screamer, a Tru-Fi Two Face Fuzz, MXR Micro Chorus, Dunlop Rotovibe Chorus/Vibrato, MXR Phase 100, Tru-Fi Ultra Tremolo, Dunlop Echoplex Delay, MXR Reverb, and a Radial Shotgun signal splitter and buffer. Juice? That’s via a Voodoo Lab Pedal Power 3 Plus.
Marcus King's Pedalboard
Foo Fighters’ Chris Shiflett
The mega-rockers’ Chris Shiflett starts his pedalboard with an EHX Micro POG, followed by a JHS Muffuletta, an MXR Flanger and EVH Phase 90, an EHX Holy Grail reverb, a Strymon Deco, and a Klon KTR. The next row sports a Boss CE-2W Waza Craft Chorus, a couple of Strymon TimeLines (one for each amp), and down below is a trio of Xotics—an EP Booster, SP Compressor, and an XW-1 Wah. Utilitarian boxes include a Lehle Little Dual II Amp Switcher, a Palmer PLI-05 Line Isolation Box, a Boss FS-5L Foot Switch (to toggle between clean and dirty on his Friedman Brown Eye), and a TC Electronic PolyTune.
Chris Shiflett's Pedalboard
Mammoth WVH's Wolf Van Halen
Wolf Van Halen brought every EVH pedal (aside from the 5150 Overdrive) for his band’s 2022 tour. The Dunlop EVH95 Cry Baby Wah gets a workout for the solo of “You’ll Be the One.” The MXR EVH 5150 Chorus and the MXR EVH Phase 90 have become interchangeable for him. The MXR EVH117 Flanger gets sprinkled in, and for the solo on “Distance,” he always uses the Boss DD-3 Digital Delay and the EarthQuaker Devices Afterneath. An acoustic DI and tuner consume the rest of the real estate.
Wolf Van Halen's Pedalboard
Full Rig Rundown: https://bit.ly/MammothWVHRRSubscribe to PG's Channel: https://bit.ly/SubscribePGYouTubeMammoth WVH's leader details and demos the series of ...Mammoth WVH’s Ronnie Ficarro
Ronnie Ficarro
Ronnie Ficarro’s bass stomp station hosts a trio of EVH-inspired pedals: an MXR EVH 5150 Chorus, a MXR EVH 5150 Overdrive, and the MXR EVH Phase 90—plus an EHX Pitch Fork for approximating the low B roar that Wolf recorded on the song “Epiphany.” The nondescript silver box is a channel switcher for his Fender Super Bassman, and a Peterson StroboStomp HD does the tuning.
Rig Rundown: Mammoth WVH
El Ten Eleven’s Kristian Dunn
As half of this bass and drums duo, Kristian Dunn used to use three pedalboards, crouching down and manipulating settings all night. Today, he depends primarily on a Line 6 M9 Stompbox Modeler, although it’s two Boomerang III Phrase Samplers that make an El Ten Eleven show happen. In line, they’re separated by the DigiTech Bass Whammy. Dunn routes his signal this way so he can use the Whammy to shift octaves or keys on entire loops in Phrase Sampler one. The second Phrase Sampler, after the Whammy, allows him to pitch-shift specific loops without impacting the whole song or other loops. The Strymon TimeLine conjures precise repeats and specific delay settings not in the M9. The EHX Superego Synth Engine is a secret weapon, for reverse-sound passages. When he holds down the freeze function and plays the next note, it’s not audible until he releases the switch, and then the ongoing audible note blends into the second note. Cool, right? The remaining two pedals are a Nu-X NFB-2 Lacerate FET Boost and a Marshall GV-2 Guv’nor Plus. His tuner: a Boss TU-3 Chromatic. A Custom Audio Electronics RS-T MIDI Foot Controller makes Dunn’s scene changes easier, talking with the M9 and Strymon to alleviate some tap dancing.
Rig Rundown: El Ten Eleven's Kristian Dunn
Shinedown’s Zach Myers
For the Shinedown guitarist, everything starts at the Fractal Audio Axe-Fx IIIs—a main and a backup. There are four channels of Shure UR4D+ wireless units (three for electric and one for acoustic). An AES digital out runs to an Antelope Audio Trinity Master Clock and Antelope Audio 10MX Rubidium Atomic Clock. This helps fatten the fully stereo, digital rig by converting it to analog. After that, IRs off the Axe-Fx (left and right) channel into a pair of Neve DIs that then feed a Fryette G-2502-S Two/Fifty/Two Stereo Power Amplifier. (There’s another for backup.) And finally, parallel signals go to two ISO cabs and two Universal Audio OX Amp Top Box reactive load boxes. Altogether, there are eight channels of guitar.
While tech Drew Foppe handles the racks, Zach still has some control at his toes via a Dunlop MC404 CAE Wah, DigiTech Whammy 5, Ernie Ball 40th Anniversary Volume Pedal, and the Fractal Audio FC-6 Foot Controller. A Voodoo Lab Pedal Power 2 Plus gives life to these pedals.
Rig Rundown: Shinedown's Zach Myers & Eric Bass [2022]
Shinedown's Eric Bass
Eric Bass’ Prestige basses hit the Shure UR4D+ wireless units (similar to Myers, he has three channels for electric and a channel for acoustic), then a Neve DI, and then a Radial JX44 signal manager that feeds into an Ampeg SVT-7 Pro for clean tone (with an extra for backup).
His onstage pedalboard includes a Dunlop 105Q Cry Baby Bass Wah, a DigiTech Bass Whammy, and an MXR M299 Carbon Copy Mini Analog Delay. The ‘Gas’ switch engages a Mojotone Deacon, and a Radial SGI-44 1-channel Studio Guitar Interface connects with his rackmount JX44, while a Boss TU-3W Waza Craft Chromatic Tuner and Voodoo Lab Pedal Power 2 Plus complete the lineup.
Hannah Wicklund
Photo by John VandeMergel
Blueser Hannah Wicklund’s pedalboard is stacked for bruising. Once the signal gets past her MXR Talk Box and Dunlop JC95 Jerry Cantrell Signature Cry Baby, it hits the channel switch for her Orange head. That stays in overdrive mode for about 75 percent of her set, which she says gives her sound its grizzly-bear lows. Next up is a classic—a Boss BD-2 Blues Driver. But this one has a Keeley mod that opens up the low end and keeps mids and highs better defined. The BD-2 gets some atmospheric help via a Dunlop EP103 Echoplex Delay, and the J. Rockett Archer also pairs with the BD-2. There’s an MXR Micro Flanger and an EHX Nano POG, a T. Rex Room-Mate Tube Reverb (on a hall setting), and a Peterson StroboStomp HD, plus an MXR Carbon Copy and a Keeley Rotten Apple OpAmp Fuzz.
Rig Rundown: Hannah Wicklund
Code Orange’s Reba Meyers
Reba Meyers’ tone starts with her signature ESP LTD RM-600 guitar and her 5150 head, but from there her sound is processed via a Fractal Audio Axe-Fx III run through the effects loop of her amp and used to coordinate channel switching. Meyers notes that for some songs she uses it only as a gate, while for others she adds in precise modulation, delay, reverbs, and “noise.” The rest of the rack features a Two-Notes Torpedo Captor X that she uses for cab sims and sending a pure, direct signal to FOH so they can mix that with the SM57 mic on the 4x12s. A Shure GLXD4 Wireless unit keeps her untethered and a RJM Mini Amp Gizmo uses MIDI to switch the amp via the Axe-Fx III.
Her actual board has two always-on pedals: the ISP Decimator II Noise Reduction and the Ibanez TS9 Tube Screamer. They’re joined by a Moog MF Ring Mod, a Boss PS-6 Harmonist, an AMT Electronics WH-1 Japanese Girl Optical Wah, and an Universal Audio Astra Modulation Machine. Everything is controlled by the RJM Mastermind PBC/10.
Reba Meyers' Pedalboard [Code Orange]
Joe Bonamassa
For his 2022 tour, Joe Bonamassa kept his pedalboard stocked with a Way Huge Smalls Overrated Special Overdrive, a Tone Mechanics/Racksystems Loop Box, a Tone Mechanics/Racksystems Splitter, a Fulltone Supa-Trem, a Hughes & Kettner Rotosphere, a Boss DD-2 Digital Delay, an MXR Micro Flanger, an Ibanez TS808 Tube Screamer, an EHX Micro POG, a Dunlop Joe Bonamassa Fuzz Face, a Lehle A/B/C Switcher, a Dunlop Joe Bonamassa Signature Cry Baby Wah in Pelham blue, and an on/off/fast/slow dual switch for his Mesa/Boogie Revolver rotating speaker cabinet. Juice came from a Voodoo Lab Pedal Power 2 Plus.
Joe Bonamassa's "Boomer" Pedalboard
Exodus’ Gary Holt
Thrash-metallurgist Gary Holt trusts most of his switching to his tech, Steve Brogdon, who triggers everything with a rack-mounted Voodoo Lab GCX Guitar Audio Switcher that coordinates with a Voodoo Lab Ground Control Pro MIDI Foot Controller. The pedals in Brogdon’s care include a Boss SD-1 Super Overdrive, Pro Tone Pedals Gary Holt Signature Mid Boost, Maxon OD-9, MXR Bass Octave Deluxe, Maxon FL-9 Flanger, TC Electronic Corona Chorus, Boss NS-2 Noise Suppressor, and a Darta Effects Bonded by Delay. A BBE Supa-Charger provides juice.
Holt still stomps these boxes himself: a Does It Doom Doomsaw, Mooer Tender Octaver, Mooer Green Mile, and a Dunlop JC95SE Jerry Cantrell Special Edition Crybaby Wah. A Shure GLXD16 Digital Wireless Guitar Pedal System lets him rock untethered.
Rig Rundown: Exodus' Gary Holt [2022]
Dinosaur Jr.’s J Mascis
For at least 10-plus years, J Mascis has used a Bob Bradshaw-built Custom Audio Electronics switcher as his mission control. His longtime stomps include a Tone Bender MkI/Rangemaster-clone combo pedal made by Built to Spill’s Jim Roth (bottom right corner), Mascis’ first EHX Ram’s Head Big Muff Pi (top right), a vintage EHX Deluxe Electric Mistress, an MC-FX clone of a Univox Super Fuzz (lower right, blue box), a pair of ZVEX pedals—a Double Rock (two Box of Rock stomps in one) and a Lo-Fi Loop Junky (both bottom left), a Tube Works Real Tube Overdrive, a Moog Minifooger MF Delay, and a Boss TU-3S Tuner. His recently added pedals are a Homebrew Electronics Germania 44 Treble Booster (lower right), a JAM Pedals RetroVibe MkII, an Xotic SL Drive, a Suhr Jack Rabbit Tremolo, a Dr. Scientist Frazz Dazzler fuzz, an EHX Oceans 11, and a Dunlop Jimi Hendrix ’69 Psych Series Uni-Vibe Chorus/Vibrato. Everything receives juice from an MXR MC403 Power System or an MXR M237 DC Brick.
J Mascis' Dinosaur Jr. Pedalboard
Naturally, every recording Eddie Van Halen ever played on has been pored over by legions of guitar players of all styles. It might seem funny, then, to consider EVH solos that might require more attention. But your 100 Guitarists hosts have their picks of solos that they feel merit a little discussion. Some of these are deep cuts—get ready for some instrumental bonus tracks and Van Halen III mentions—and some are among the biggest radio hits of their time. Just because their hits, though, doesn’t mean we don’t have more to add to the conversation.
We can’t cover everything EVH—Jason has already tried while producing the Runnin’ With the Dweezil podcast. But we cover as much as we can in our longest episode yet. And in the second installment of our current listening segment, we’re talking about new-ish music from Oz Noy and Bill Orcutt.
Tinkering with theSDE-3 Dual Digital Delay suggested a similar, possibly enduring appeal. As an evolution of the Roland SDE-3000rack unit from the 1980s, it’s a texture machine, bubbling with subtle-to-odd triangle LFO modulations and enhanced dual-delay patterns that make tone mazes from dopey-simple melodies. And with the capacity to use it with two amps in stereo or in panning capacity, it can be much more dimensional. But while the SDE-3 will become indispensable to some for its most complex echo textures, its basic voice possesses warmth that lends personality in pedestrian applications too.
Tapping Into the Source
Some interest in the original SDE-3000 is in its association with Eddie Van Halen, who ran two of them in a wet-dry-wet configuration, using different delay rates and modulation to thicken and lend dimension to solos. But while EVH’s de facto endorsement prompted reissues of the effect as far back as the ’90s, part of the appeal was down to the 3000’s intrinsic elegance and simplicity.
In fact, the original rack unit’s features don’t differ much from what you would find on modern, inexpensive stompbox echoes. But the SDE-3000’s simplicity and reliable predictability made it conducive to fast workflow in the studio. Critically, it also avoided the lo-fi and sterility shortcomings that plagued some lesser rivals—an attribute designer Yoshi Ikegami chalks up to analog components elsewhere in the circuit and a fortuitous clock imprecision that lends organic essence to the repeats.
Evolved Echo Animal
Though the SDE-3 traces a line back to the SDE-3000 in sound and function, it is a very evolved riff on a theme. I don’t have an original SDE-3000 on hand for comparison, but it’s easy to hear how the SDE-3 bridges a gap between analog haze and more clinical, surgical digital sounds in the way that made the original famous. Thanks to the hi-cut control, the SDE-3’s voice can be shaped to enhance the angular aspect of the echoes, or blunt sharp edges. There’s also a lot of leeway to toy with varied EQ settings without sacrificing the ample definition in the repeats. That also means you can take advantage of the polyrhythmic effects that are arguably its greatest asset.
“There’s a lot of leeway to toy with varied EQ settings without sacrificing the ample definition in the repeats.”
The SDE-3’s offset control, which generates these polyrhythmic echoes, is its heart. The most practical and familiar echos, like quarter, eighth, and dotted-eighth patterns, are easy to access in the second half of the offset knobs range. In the first half of the knob’s throw, however, the offset delays often clang about at less-regular intervals, producing complex polyrhythms that are also cool multipliers of the modulation and EQ effects. For example, when emphasizing top end in repeats, using aggressive effects mixes and pitch-wobble modulation generates eerie ghost notes that swim through and around patterns, adding rhythmic interest and texture without derailing the drive behind a groove. Even at modest settings, these are great alternatives to more staid, regular subdivision patterns. Many of the coolest sounds tend toward the foggy reverb spectrum. Removing high end, piling on feedback, and adding the woozy, drunken drift from modulation creates fascinating backdrops for slow, sparse chord melodies. Faster modulations throb and swirl like old BBC Radiophonic Workshop sci-fi sound designs.
By themselves, the modulations have their own broad appeal. Chorus tones are rarely the archetypal Roland Jazz Chorus or CE type—tending to be a bit darker and mistier. But they do a nice job suggesting that texture without lapsing into caricature. There are also really cool rotary-speaker-like textures and vibrato sounds that offer alternatives to go-to industry standards.
The Verdict
The SDE-3’s many available sounds and textures would be appealing at $219—even without the stereo and panning connectivity options, a useful hold function, and expression pedal control that opens up additional options. The panning capabilities, in particular, sparked all kinds of thoughts about studio applications. Mastering the SDE-3 takes just a little study—certain polyrhythms can be dramatically reshaped by the interactivity of other controls and you need to take care to achieve identical results twice. But this is a pedal that, by virtue of its relative simplicity and richness and breadth of sounds, exceeds the utility of some similarly priced rivals, all while opening up possibilities well outside the simple echo realm
Reader: T. Moody
Hometown: Myrtle Beach, South Carolina
Guitar: The Green Snake
Reader T. Moody turned this Yamaha Pacifica body into a reptilian rocker.
I have always loved the reverse headstock, simply because nothing says 1987 (the best year in the history of the world) like a reverse headstock. The pickups are both Seymour Duncan—an SH-1N in the neck position and TB-4 in the bridge, both in a very cool lime green color. Right when these pickups got listed, the Buy It Now button once again lit up like the Fourth of July. I am a loyal disciple of Sperzel locking tuners and think Bob Sperzel was a pure genius, so I knew those were going on this project even before I started on it. I also knew that I wanted a Vega-Trem; those units are absolutely amazing.
When the body arrived, I thought it would be cool to do some kind of burst around the yellow so I went with a neon green. It turned out better than I imagined. Next up was the shaping and cutting of the pickguard. I had this crocodile-type, faux-leather material that I glued on the pickguard and then shaped to my liking. I wanted just a single volume control and no tone knob, because, like King Edward (Van Halen) once said, “Your volume is your tone.”
T. Moody
I then shaped and glued the faux-leather material in the cavity. The tuning knobs, volume knob, pickguard, screws, and selector switch were also painted in the lemon-lime paint scheme. I put everything together, installed the pickups, strung it up, set it up, plugged it in, and I was blown away. I think this is the best-playing and -sounding guitar I have ever tried.
The only thing missing was the center piece and strap. The latter was easy because DiMarzio makes their ClipLock in neon green. The center piece was more difficult because originally, I was thinking that some kind of gator-style decoration would be cool. In the end, I went with a green snake, because crocodiles ain’t too flexible—and they’re way too big to fit in a pickup cavity!
The Green Snake’s back is just as striking as the front.
